FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-conservative/p_uart.val @ 564:ade27cd84b97
aci3: implemented loopback option for AT@E1 and AT@E2
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Mon, 07 Jan 2019 00:47:48 +0000 |
| parents | c15047b3d00d |
| children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_uart.val | | SOURCE : "sap\uart.pdf" | | LastModified : "2002-03-11" | | IdAndVersion : "8441.117.99.014" | | SrcFileTime : "Thu Nov 29 09:56:02 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_UART_VAL #define P_UART_VAL #define CDG_ENTER__P_UART_VAL #define CDG_ENTER__FILENAME _P_UART_VAL #define CDG_ENTER__P_UART_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_UART_VAL__LAST_MODIFIED _2002_03_11 #define CDG_ENTER__P_UART_VAL__ID_AND_VERSION _8441_117_99_014 #define CDG_ENTER__P_UART_VAL__SRC_FILE_TIME _Thu_Nov_29_09_56_02_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_UART_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_esc_valid */ #define UART_IO_ESC_UNDEF (0x0) /* values for escape sequence detection remain unchanged */ #define UART_IO_ESC_VALID (0x1) /* values for escape sequence detection are valid */ /* * Value constants for VAL_xoff */ #define UART_IO_XOFF_DEFAULT (0x13) /* default value for XOff character */ /* * Value constants for VAL_xon */ #define UART_IO_XON_DEFAULT (0x11) /* default value for XOn character */ /* * Value constants for VAL_parity */ #define UART_IO_PA_UNDEF (0xff) /* parity remain unchanged */ #define UART_IO_PA_NONE (0x0) /* no parity and no space */ #define UART_IO_PA_EVEN (0x1) /* even parity */ #define UART_IO_PA_ODD (0x2) /* odd parity */ #define UART_IO_PA_SPACE (0x3) /* no parity but space */ /* * Value constants for VAL_flow_tx */ #define UART_IO_FC_TX_UNDEF (0xff) /* TX flow control mode remain unchanged */ #define UART_IO_FC_TX_NONE (0x0) /* no TX flow control */ #define UART_IO_FC_TX_RTS (0x1) /* RTS/CTS flow control */ #define UART_IO_FC_TX_XOFF (0x2) /* XON/XOFF flow control */ /* * Value constants for VAL_esc_char */ #define UART_IO_ESC_CHAR_DEFAULT (0x2b) /* default value for escape character ('+') */ /* * Value constants for VAL_flow_rx */ #define UART_IO_FC_RX_UNDEF (0xff) /* RX flow control mode remain unchanged */ #define UART_IO_FC_RX_NONE (0x0) /* no RX flow control */ #define UART_IO_FC_RX_RTS (0x1) /* RTS/CTS flow control */ #define UART_IO_FC_RX_XOFF (0x2) /* XON/XOFF flow control */ /* * Value constants for VAL_nsb */ #define UART_IO_SB_UNDEF (0xff) /* stop bits remain unchanged */ #define UART_IO_SB_1 (0x1) /* one stop bit */ #define UART_IO_SB_2 (0x2) /* two stop bits */ /* * Value constants for VAL_speed */ #define UART_IO_SPEED_UNDEF (0xff) /* baud rate remain unchanged */ #define UART_IO_SPEED_AUTO (0x0) /* auto detection of baud rate */ #define UART_IO_SPEED_75 (0x1) /* baud rate of 75 bits per second */ #define UART_IO_SPEED_150 (0x2) /* baud rate of 150 bits per second */ #define UART_IO_SPEED_300 (0x3) /* baud rate of 300 bits per second */ #define UART_IO_SPEED_600 (0x4) /* baud rate of 600 bits per second */ #define UART_IO_SPEED_1200 (0x5) /* baud rate of 1200 bits per second */ #define UART_IO_SPEED_2400 (0x6) /* baud rate of 2400 bits per second */ #define UART_IO_SPEED_4800 (0x7) /* baud rate of 4800 bits per second */ #define UART_IO_SPEED_7200 (0x8) /* baud rate of 7200 bits per second */ #define UART_IO_SPEED_9600 (0x9) /* baud rate of 9600 bits per second */ #define UART_IO_SPEED_14400 (0xa) /* baud rate of 14400 bits per second */ #define UART_IO_SPEED_19200 (0xb) /* baud rate of 19200 bits per second */ #define UART_IO_SPEED_28800 (0xc) /* baud rate of 28800 bits per second */ #define UART_IO_SPEED_33900 (0xd) /* baud rate of 33900 bits per second */ #define UART_IO_SPEED_38400 (0xe) /* baud rate of 38400 bits per second */ #define UART_IO_SPEED_57600 (0xf) /* baud rate of 57600 bits per second */ #define UART_IO_SPEED_115200 (0x10) /* baud rate of 115200 bits per second */ #define UART_IO_SPEED_203125 (0x11) /* baud rate of 203125 bits per second */ #define UART_IO_SPEED_406250 (0x12) /* baud rate of 406250 bits per second */ #define UART_IO_SPEED_812500 (0x13) /* baud rate of 812500 bits per second */ /* * Value constants for VAL_esc_gp */ #define UART_IO_ESC_GP_DEFAULT (0x3e8) /* default value for guard period (1000 ms) */ #define UART_IO_ESC_OFF (0x0) /* no escape sequence detection */ /* * Value constants for VAL_xoff_valid */ #define UART_IO_XOFF_UNDEF (0x0) /* XOff character remain unchanged */ #define UART_IO_XOFF_VALID (0x1) /* XOff character valid */ /* * Value constants for VAL_xon_valid */ #define UART_IO_XON_UNDEF (0x0) /* XOn character remain unchanged */ #define UART_IO_XON_VALID (0x1) /* XOn character valid */ /* * Value constants for VAL_bpc */ #define UART_IO_BPC_UNDEF (0xff) /* bits per character remain unchanged */ #define UART_IO_BPC_7 (0x7) /* 7 bits per character */ #define UART_IO_BPC_8 (0x8) /* 8 bits per character */ /* * Value constants for VAL_dti_conn */ #define UART_CONNECT_DTI (0x0) /* Connect DTI to UART */ #define UART_DISCONNECT_DTI (0x1) /* Disconnect DTI from UART */ /* * Value constants for VAL_line_state */ #define UART_LINE_ON (0x0) /* activate line */ #define UART_LINE_OFF (0x1) /* deactivate line */ /* * Value constants for VAL_detection */ #define UART_ESC_DETECTION_OFF (0x0) /* turn off escape sequence detection */ #define UART_ESC_DETECTION_ON (0x1) /* turn on escape sequence detection */ /* * Value constants for VAL_cause */ #define UART_DETECT_ESC (0x1) /* escape sequence detected */ #define UART_DETECT_DTR (0x2) /* DTR line of serial link drops */ /* * Value constants for VAL_error */ #define UART_ERROR_NO_CHANNEL (0x8) /* can not open VSI communication channel */ #define UART_ERROR_MUX_ESTABLISH_FAIL (0x9) /* establishment of multiplexer operation fails */ #define UART_ERROR_MUX_NO_RESPONSE (0xa) /* no response from TE multiplexer */ /* * Value constants for VAL_mode */ #define UART_MUX_MODE_BASIC (0x0) /* basic option */ #define UART_MUX_MODE_ADVANCED (0x1) /* advanced option */ /* * Value constants for VAL_frame_type */ #define UART_MUX_FRAME_UIH (0x0) /* UIH frames used only */ #define UART_MUX_FRAME_UI (0x1) /* UI frames used only */ #define UART_MUX_FRAME_I (0x2) /* I frames used only */ #define UART_MUX_FRAME_DEFAULT (0x0) /* default value */ /* * Value constants for VAL_n1 */ #define UART_MUX_N1_BASIC_DEFAULT (0x1f) /* default value for the basic option */ #define UART_MUX_N1_ADVANCED_DEFAULT (0x40) /* default value for the advanced option */ /* * Value constants for VAL_t1 */ #define UART_MUX_T1_DEFAULT (0xa) /* default value (100 ms) */ /* * Value constants for VAL_n2 */ #define UART_MUX_N2_DEFAULT (0x3) /* default value */ /* * Value constants for VAL_t2 */ #define UART_MUX_T2_DEFAULT (0x1e) /* default value (300 ms) */ /* * Value constants for VAL_t3 */ #define UART_MUX_T3_DEFAULT (0xa) /* default value (10 seconds) */ /* * Value constants for VAL_convergence */ #define UART_MUX_CONVERGENCE_UOS (0x1) /* unstructed octet stream */ #define UART_MUX_CONVERGENCE_UOSV24 (0x2) /* unstructed octet stream with transmission of V.24 signal states */ #define UART_MUX_CONVERGENCE_UFD (0x3) /* uninterruptible framed data */ #define UART_MUX_CONVERGENCE_IFD (0x4) /* interruptible framed data */ #define UART_MUX_CONVERGENCE_DEFAULT (0x1) /* default value */ /* * Value constants for VAL_service */ #define UART_MUX_SERVICE_AT (0x0) /* AT command mode */ #define UART_MUX_SERVICE_DATA (0x1) /* data service */ #define UART_MUX_SERVICE_VOICE_0621 (0x2) /* voice service (coded - GSM 06.21) */ #define UART_MUX_SERVICE_VOICE_PCM64U (0x3) /* voice service (coded - PCM 64 kbits/s U-law) */ #define UART_MUX_SERVICE_VOICE_ADPCM (0x4) /* voice service (coded - ADPCM 32 kbits/s) */ #define UART_MUX_SERVICE_VOICE_PCM64A (0x5) /* voice service (coded - PCM 64 kbits/s A-law) */ #define UART_MUX_SERVICE_VOICE_PCM128 (0x6) /* voice service (coded - PCM 128 kbits/s) */ #define UART_MUX_SERVICE_GPRS (0x7) /* GPRS data */ #define UART_MUX_SERVICE_CS (0x8) /* Circuit-Switched data */ #define UART_MUX_SERVICE_TRACE (0x9) /* Trace / Debug output */ #define UART_MUX_SERVICE_DEFAULT (0x0) /* default value */ /* * user defined constants */ #define UART_DLCI_NOT_MULTIPLEXED (0x0) #include "CDG_LEAVE.h" #endif