view cdg211/prim/mph.pdf @ 378:aee911923299

components/*: support for c11x target
author Mychaela Falconia <falcon@freecalypso.org>
date Sat, 13 Jan 2018 18:21:16 +0000
parents 56abf6cf8a0b
children
line wrap: on
line source

;********************************************************************************
;*** File           : mph.pdf
;*** Creation       : Fri Jun 08 13:58:06 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mph
;*** Document No.   : 6148.109.01.207
;*** Document Date  : 2003-02-04
;*** Document Status: BEING_PROCESSED
;*** Document Author: LG
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Fri Apr 28 11:06:12 2006"
PRAGMA 	LAST_MODIFIED 	"2003-02-04"
PRAGMA 	ID_AND_VERSION 	"6148.109.01.207"



CONST 	MAX_MA_CHANNELS 	64 	; determines the (maximum) size of mobile allocation list; the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
CONST 	MAX_NEIGHBOURCELLS 	33 	; determines the (maximum) size of neighbourcell list (maximal case is 32 neighbour cells and the serving cell); the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
CONST 	MAX_CHANNELS 	160 	; used for power measurements (sum of a maximum of 40 GSM 900 / 850 channels and a maximum of 40 DCS 1800 / PCS 1900 channels)
CONST 	MAX_NCELL_EOTD_ALR 	15 	; number of neighbour cells the layer 1 is able to perform EOTD measurements for
CONST 	MAX_NCELL_EOTD_RES 	12 	; number of ncells returned
CONST 	XCOR_NO 	18 	; number of cross correlation values
CONST 	STD_900 	1 	; Frequency band GSM 900
CONST 	STD_EGSM 	2 	; Frequency band extended GSM 900
CONST 	STD_1900 	3 	; Frequency band PCS 1900 (US band)
CONST 	STD_1800 	4 	; Frequency band DCS 1800
CONST 	STD_DUAL 	5 	; Dual frequency band GSM 900 and DCS 1800
CONST 	STD_DUAL_EGSM 	6 	; Dual frequency band extended GSM 900 and DCS 1800
CONST 	STD_850 	7 	; Frequency band GSM 850 (US band)
CONST 	STD_DUAL_US 	8 	; Dual frequency band GSM 850 and PCS 1900 (US bands)
CONST 	US_BIT 	0x8000 	; the most significant bit is set for channel numbers of the united states to differentiate them from european channel numbers
CONST 	STD_BIT_MASK 	0x7800 	; bit mask (bits 11..14 in the range 0..15) for  discriminate the std value from arfcn;                                             std =((arfcn&STD_BIT_MASK)>>STD_BIT_SHIFT)+1; value range range 1..16
CONST 	STD_BIT_SHIFT 	11 	; bit mask to eleminate the channel numbers without the US_BIT and the std bits
CONST 	ARFCN_MASK 	0x07FF 	; bit mask to eleminate the channel numbers without the US_BIT and the std bits
CONST 	EUROPEAN_FREQ_AREA 	1 	; search frequencies from the american frequency bands at power request
CONST 	AMERICAN_FREQ_AREA 	2 	; search frequencies from the europeanfrequency bands at power request
CONST 	ALL_FREQ_AREA 	3 	; search frequencies from all frequency bands at power request
CONST 	NEXT_AMERICAN_AREA 	0x80 	; search frequencies from the american frequency bands at next scan part
CONST 	LOW_CHANNEL_900 	1 	; Low border channel of the GSM 900 band
CONST 	HIGH_CHANNEL_900 	124 	; High border channel of the GSM 900 band
CONST 	LOW_CHANNEL_EGSM 	975 	; Low border channel of the extended GSM 900 band
CONST 	HIGH_CHANNEL_EGSM 	1024 	; High border channel of the extended GSM 900 band
CONST 	CHANNEL_0 	0 	; Channel 0 of the extended GSM 900 band
CONST 	CHANNEL_0_INTERNAL 	1024 	; Channel 0 of the extended GSM 900 band in internal representation
CONST 	LOW_CHANNEL_1900 	512 	; Low border channel of the OCS 1900 band
CONST 	HIGH_CHANNEL_1900 	810 	; High border channel of the OCS 1900 band
CONST 	LOW_CHANNEL_1800 	512 	; Low border channel of the DCS 1800 band
CONST 	HIGH_CHANNEL_1800 	885 	; High border channel of the DCS 1800 band
CONST 	LOW_CHANNEL_850 	128 	; Low border channel of the GSM 850 band
CONST 	HIGH_CHANNEL_850 	251 	; High border channel of the GSM 850 band
CONST 	MAX_CARRIERS_GSM900 	124 	; Maximally number of carriers for GSM 900
CONST 	MAX_CARRIERS_EGSM900 	174 	; Maximally number of carriers for extended GSM 900
CONST 	MAX_CARRIERS_PCS1900 	299 	; Maximally number of carriers for PCS 1900
CONST 	MAX_CARRIERS_DCS1800 	374 	; Maximally number of carriers for DCS 1800
CONST 	MAX_CARRIERS_DUAL 	498 	; Maximally number of carriers for dual band with GSM 900 and DCS 1800
CONST 	MAX_CARRIERS_DUAL_EGSM 	548 	; Maximally number of carriers for dual band with extended GSM 900 and DCS 1800
CONST 	MAX_CARRIERS_GSM850 	124 	; Maximally number of carriers for GSM 850
CONST 	MAX_CARRIERS_DUAL_US 	423 	; Maximally number of carriers for dual band with GSM 850 and PCS 1900
CONST 	MAX_EMO_CHANNELS 	21 	; 21 ARFCN for Extended Measurement Order (SACCH)
CONST 	RR_BA_HIGH 	255 	; maximum BA_ID used by RR
CONST 	RR_BA_LOW 	128 	; minimum BA_ID used by RR
CONST 	ALR_BA_HIGH 	127 	; maximum BA_ID used by ALR
CONST 	ALR_BA_LOW 	0 	; minimum BA_ID used by ALR
CONST 	KC_STRING_SIZE 	8 	; Maximum KC string length
CONST 	MAX_RACH_REQ 	8 	; Maximum number of RACH Requests
CONST 	RR_ALR_MEAS_REPORT_SIZE 	7 	; Measurement report size(1 serving cell and 6 nc)
CONST 	LIST_MAX_SIZE 	128 	; maximum arfcns 128x8-1024 carriers
CONST 	MAX_REGIONS 	2 	; maximum regions European and American
CONST 	MAX_NUM_BANDS 	5 	; Maximum number of frequency bands
CONST 	LOWER_RXLEV_THRESHOLD 	4 	; lower rxlevel thershold below this value cells are not selected
CONST 	LOWER_RXLEV_THRESHOLD_850 	7 	; lower rxlevel thershold for GSM 850 band
CONST 	B_GSM_850 	0 	; Band index for GSM 850 band threshold rxlevel
CONST 	B_GSM_900 	1 	; Band index for GSM 900 band threshold rxlevel
CONST 	B_DCS_1800 	2 	; Band index for DCS 1800 band threshold rxlevel
CONST 	B_PCS_1900 	3 	; Band index for PCS 1900 band threshold rxlevel
CONST 	B_E_GSM 	4 	; Band index for EGSM band threshold rxlevel
CONST 	FULL_SEARCH_MODE_ATTEMPTS 	5 	; Number of power measurement attempts for Full search mode
CONST 	NORMAL_SEARCH_MODE_ATTEMPTS 	5 	; Number of power measurement attempts for Normal search mode
CONST 	TIM_FULL_SEARCH_POWERMEAS_VAL 	4000 	; Maximum amount of time for full search power measurement 
CONST 	TIM_NORMAL_SEARCH_POWERMEAS_VAL 	4000 	; Maximum amount of time for Normal search power measurement 
CONST 	MIN_CHANNELS_PER_BAND 	40 	; Minimum number of channels per band should be added in MPH_POWER_CNF
CONST 	MAX_CHANNELS_PER_BAND 	60 	; Maximum number of channels per band should be added in MPH_POWER_CNF



VALTAB 	VAL_arfcn
VAL 	1 - 124 	"GSM 900 without extension band"
VAL 	975 - 1023 	"E-GSM 900"
VAL 	512 - 810 	"DCS 1800 or PCS 1900 (without US_BIT)"
VAL 	811 - 885 	"DCS 1800"
VAL 	128 - 256 	"GSM 850 without US_BIT"
VAL 	2048 - 2048 	"GSM 900 without extension band (single mode, std=1)"
VAL 	4097 - 4220 	"GSM 900 (E-GSM mode, std=2)"
VAL 	5071 - 5119 	"E-GSM 900 (E-GSM mode, std=2)"
VAL 	39424 - 39722 	"PCS 1900 (US single mode, std=3)"
VAL 	8704 - 9077 	"DCS 1800 (single mode, std=4)"
VAL 	10241 - 10364 	"GSM 900 (Dual mode, std=5)"
VAL 	10752 - 11125 	"DCS 1800 (Dual mode, std=5)"
VAL 	12288 - 12412 	"GSM 900 (Extended dual mode, std=6)"
VAL 	13263 - 13311 	"E-GSM 900 (Extended dual mode, std=6)"
VAL 	12800 - 13173 	"DCS 1800 (Extended dual mode, std=6)"
VAL 	47232 - 47355 	"GSM 850 (US single mode, std=7)"
VAL 	49280 - 49403 	"GSM 850 (US dual mode, std=8)"
VAL 	49664 - 49962 	"PCS 1900 (US dual mode, std=8)"
VAL 	0 	 	"E-GSM 900"
VAL 	4096 	 	"E-GSM 900 (E-GSM mode, std=2)"
VAL 	12288 	 	"E-GSM 900 (Extended dual mode, std=6)"

VALTAB 	VAL_comb_ccch
VAL 	0 	COMB_CCCH_NOT_COMB 	"CCCH not combined with SDCCH"
VAL 	1 	COMB_CCCH_COMB 	"CCCH combined with SDCCH"

VALTAB 	VAL_tn
VAL 	0 - 7 	"timeslot number 0-7"

VALTAB 	VAL_dlt
VAL 	10 - 45 	"initial value"

VALTAB 	VAL_pg
VAL 	0 - 80 	"paging group number"

VALTAB 	VAL_bs_ag_blocks_res
VAL 	0 - 7 	"number of blocks reserved for AGCH"

VALTAB 	VAL_bs_pa_mfrms
VAL 	0 	 	"2 Multiframe Periods"
VAL 	1 	 	"3 Multiframe Periods"
VAL 	2 	 	"4 Multiframe Periods"
VAL 	3 	 	"5 Multiframe Periods"
VAL 	4 	 	"6 Multiframe Periods"
VAL 	5 	 	"7 Multiframe Periods"
VAL 	6 	 	"8 Multiframe Periods"
VAL 	7 	 	"9 Multiframe Periods"

VALTAB 	VAL_power
VAL 	0 - 31 	"transmission power level"

VALTAB 	VAL_rx_lev
VAL 	0 - 63 	"received field strength"

VALTAB 	VAL_rx_qual_full
VAL 	0 - 7 	"received quality"

VALTAB 	VAL_bsic
VAL 	0 - 63 	"base station identification code"
VAL 	64 	MPH_BSIC_UNKNOWN 	"Cell is removed from list (GPRS)"

VALTAB 	VAL_dtx
VAL 	0 	DTX_NOT_USED 	"DTX is not used"
VAL 	1 	DTX_USED 	"DTX is used"

VALTAB 	VAL_otd
VAL 	0 - 63 	"timing advance"

VALTAB 	VAL_ta
VAL 	0 - 63 	"timing advance"
VAL 	255 	TA_NOT_AVAIL 	"timing advance is not available in Idle Mode"

VALTAB 	VAL_v_start
VAL 	0 	 	"not valid"
VAL 	1 	 	"valid"

VALTAB 	VAL_ch
VAL 	1 	CH_TCH_F 	"TCH/F, FACCH Full Rate"
VAL 	2 	CH_TCH_H_1 	"TCH/H(1), FACCH Half Rate"
VAL 	3 	CH_TCH_H_2 	"TCH/H(2), FACCH Half Rate"
VAL 	4 	CH_SDCCH_4_0 	"SDCCH/4(0)"
VAL 	5 	CH_SDCCH_4_1 	"SDCCH/4(1)"
VAL 	6 	CH_SDCCH_4_2 	"SDCCH/4(2)"
VAL 	7 	CH_SDCCH_4_3 	"SDCCH/4(3)"
VAL 	8 	CH_SDCCH_8_0 	"SDCCH/8(0)"
VAL 	9 	CH_SDCCH_8_1 	"SDCCH/8(1)"
VAL 	10 	CH_SDCCH_8_2 	"SDCCH/8(2)"
VAL 	11 	CH_SDCCH_8_3 	"SDCCH/8(3)"
VAL 	12 	CH_SDCCH_8_4 	"SDCCH/8(4)"
VAL 	13 	CH_SDCCH_8_5 	"SDCCH/8(5)"
VAL 	14 	CH_SDCCH_8_6 	"SDCCH/8(6)"
VAL 	15 	CH_SDCCH_8_7 	"SDCCH/8(7)"

VALTAB 	VAL_tsc
VAL 	0 - 7 	"training sequence code, coded as in GSM 04.08 / 05.02"

VALTAB 	VAL_h
VAL 	0 	H_NO 	"no hopping"
VAL 	1 	H_FREQ 	"frequency hopping"

VALTAB 	VAL_maio
VAL 	0 - 63 	"mobile allocation index offset, coded as in GSM 04.08 / 05.02"

VALTAB 	VAL_hsn
VAL 	0 - 63 	"hopping sequence number, coded as in GSM 04.08 / 05.02"

VALTAB 	VAL_rlt
VAL 	0 - 15 	"code point allocation according to GSM 04.08, ch. 10.5.2.3a; mapping to values 4, 8, 12, ... 60, 64 has to be done by PL"

VALTAB 	VAL_pwrc
VAL 	0 	PWRC_NOT_SET 	"PWRC is not set, exact meaning is defined in GSM 05.08"
VAL 	1 	PWRC_SET 	"PWRC is set, exact meaning is defined in GSM 05.08"

VALTAB 	VAL_tav
VAL 	0 - 31 	"timing advance, coding as in GSM 04.08, ch. 10.5.2.40, bit periods"

VALTAB 	VAL_algo
VAL 	0 	ALGO_A5_1 	"A5/1"
VAL 	1 	ALGO_A5_2 	"A5/2"
VAL 	2 	ALGO_A5_3 	"A5/3"
VAL 	3 	ALGO_A5_4 	"A5/4"
VAL 	4 	ALGO_A5_5 	"A5/5"
VAL 	5 	ALGO_A5_6 	"A5/6"
VAL 	6 	ALGO_A5_7 	"A5/7"

VALTAB 	VAL_mod
VAL 	0 	MODE_CELL_SELECTION 	"cell selection"
VAL 	1 	MODE_CELL_RESELECTION 	"cell reselection"
VAL 	2 	 	"unused"
VAL 	3 	MODE_IMM_ASSIGN 	"immediate assignment"
VAL 	4 	MODE_CHAN_ASSIGN 	"channel assignment"
VAL 	5 	MODE_ASYNC_HANDOVER 	"asynchronous handover"
VAL 	6 	MODE_SYNC_HANDOVER 	"synchronous handover"
VAL 	7 	MODE_PRE_SYNC_HANDOVER 	"pre synchronous handover"
VAL 	8 	MODE_PSEUDO_SYNC_HANDOVER 	"pseudo synchronous handover"
VAL 	9 	MODE_SYS_INFO_CHANGE 	"sys info has changed"
VAL 	10 	MODE_PACKET_TRANSFER 	"enter packet transfer mode"
VAL 	11 	MODE_PDCH_ASSIGN 	"PDCH assignment"
VAL 	12 	MODE_CELL_CHANGE_ORDER 	"network controlled cell change"
VAL 	13 	MODE_CELL_RESELECTION_SYNC_ONLY 	"Sync only"
VAL 	14 	MODE_CONFIG_PL 	"Config idle mode params, but don't start processes in L1"

VALTAB 	VAL_mode
VAL 	0b00000000 	MODE_SIG_ONLY 	"signalling only"
VAL 	0b00000001 	MODE_SPEECH_VER1 	"speech (full rate or half rate), version 1"
VAL 	0b00100001 	MODE_SPEECH_VER2 	"speech (full rate or half rate), version 2"
VAL 	0b01000001 	MODE_SPEECH_VER3 	"speech (full rate or half rate), version 3"
VAL 	0b00001111 	MODE_DATA_14_5 	"data, 14.5 kbit/s radio interface rate, corresponds to 14.4 kbit/s user rate"
VAL 	0b00000011 	MODE_DATA_12_0 	"data, 12.0 kbit/s radio interface rate, corresponds to 9.6 kbit/s user rate"
VAL 	0b00001011 	MODE_DATA_6_0 	"data, 6.0 kbit/s radio interface rate, corresponds to 4.8 kbit/s user rate"
VAL 	0b00010011 	MODE_DATA_3_6 	"data, 3.6 kbit/s radio interface rate, corresponds to 2.4 kbit/s user rate"

VALTAB 	VAL_st_mode
VAL 	0 	CODEC_MODE_1 	"lowest codec mode"
VAL 	1 	CODEC_MODE_2 	"second lowest mode"
VAL 	2 	CODEC_MODE_3 	"third lowest mode"
VAL 	3 	CODEC_MODE_4 	"highest mode"

VALTAB 	VAL_cs
VAL 	0 	CS_NO_BCCH_AVAIL 	"no BCCH available"
VAL 	1 	CS_DOWN_LINK_FAIL 	"down link failure"
VAL 	2 	CS_RADIO_LINK_FAIL 	"radio link failure"
VAL 	3 	CS_NO_HBCCH_AVAIL 	"no HPLMN BCCH available"
VAL 	8 	CS_BCCH_READ_ERROR 	"error during BCCH reading"
VAL 	10 	CS_STOP_BCCH_READING 	"stop BCCH reading"
VAL 	11 	CS_STOP_PLMN_SEARCH 	"Stop PLMN search"
VAL 	12 	CS_CLEAN_SYS_INFO 	"Clean System Information buffer"
VAL 	13 	CS_SYS_INFO_1_NOT_NEEDED 	"System info 1 is not needed"
VAL 	14 	CS_RXLEV_VAL_REQ 	"Rxlev values are requested"
VAL 	15 	CS_STOP_PLMN_SEARCH_AND_DEACTIVATE 	"Stop PLMN search and enter sleep mode"
VAL 	16 	CS_SCELL_IS_SYNCED 	"Synchronization done"
VAL 	17 	CS_START_PCCO 	"start of packet cell change order and the cell is not in the BA list"
VAL 	18 	CS_NC_SYNC_FAILED 	"Lost synchronization with neighbour cell"
VAL 	255 	CS_NO_ERROR 	"no error occurred"

VALTAB 	VAL_pclass
VAL 	0 	CLASS_1 	"class 1"
VAL 	1 	CLASS_2 	"class 2"
VAL 	2 	CLASS_3 	"class 3"
VAL 	3 	CLASS_4 	"class 4"
VAL 	4 	CLASS_5 	"class 5"

VALTAB 	VAL_tch_loop
VAL 	0x00 - 0xFE 	"values correspond to GSM 04.14, sub-channel IE of the CLOSE_TCH_LOOP_CMD message"
VAL 	0xFF 	 	"NOT_PRESENT_8BIT, open TCH loop, valid OPEN_LOOP_CMD message has been received"
VAL 	0 	TCH_LOOP_A 	"Internal test TCH loop command A"
VAL 	1 	TCH_LOOP_B 	"Internal test TCH loop command B"
VAL 	2 	TCH_LOOP_C 	"Internal test TCH loop command C"
VAL 	3 	TCH_LOOP_D 	"Internal test TCH loop command D"
VAL 	4 	TCH_LOOP_E 	"Internal test TCH loop command E"
VAL 	5 	TCH_LOOP_F 	"Internal test TCH loop command F"
VAL 	6 	TCH_LOOP_I 	"Internal test TCH loop command I"

VALTAB 	VAL_dedi_res
VAL 	0 	DEDI_RES_OK 	"success"
VAL 	1 	DEDI_RES_TIMEOUT 	"timeout"
VAL 	2 	DEDI_RES_TA_OUT_OF_RANGE 	"timing advance out of range"
VAL 	3 	DEDI_RES_CELL_NOT_SYNC 	"cell not sync by ALR"

VALTAB 	VAL_device
VAL 	0 	DAI_NO_TEST 	"normal operation (no tested device via DAI)"
VAL 	1 	DAI_SPEECH_DL 	"test of speech decoder / DTX downlink"
VAL 	2 	DAI_SPEECH_UL 	"test of speech decoder / DTX uplink"
VAL 	4 	DAI_AD_DA 	"test of acoustic devicesand A/D and D/A"

VALTAB 	VAL_ho_pow
VAL 	0 - 31 	"transmission power level; e.g. from a Power Command IE of a HANDOVER COMMAND"

VALTAB 	VAL_ho_acc_type
VAL 	0 	 	"sending of HANDOVER ACCESS is mandatory"
VAL 	1 	 	"sending of HANDOVER ACCESS is optional"

VALTAB 	VAL_ho_nci
VAL 	0 	NCI_TA_OUT_OF_RANGE_OK 	"timing advance out of range allowed"
VAL 	1 	NCI_TA_OUT_OF_RANGE_NOT_ALLOWED 	"timing advance out of range not allowed"

VALTAB 	VAL_multi_band
VAL 	0 	MULTI_BAND_0 	"normal operation"
VAL 	1 	MULTI_BAND_1 	"one cell of the non-serving cell band"
VAL 	2 	MULTI_BAND_2 	"two cells of the non-serving cell band"
VAL 	3 	MULTI_BAND_3 	"three cells of the non-serving cell band"

VALTAB 	VAL_len_imsi
VAL 	1 - 15 	"indicates length of IMSI"
VAL 	0 	 	"indicates not valid"

VALTAB 	VAL_identity_type
VAL 	1 	ID_IMSI 	"Paged by IMSI"
VAL 	4 	ID_TMSI 	"Paged by TMSI"
VAL 	8 	ID_PTMSI 	"Paged by PTMSI"

VALTAB 	VAL_channel_needed
VAL 	0 	CN_ANY 	"Any channel"
VAL 	1 	CN_SDCCH 	"SDCCH"
VAL 	2 	CN_TCH_FULL 	"TCH Full Rate"
VAL 	3 	CN_TCH_H_OR_F 	"TCH Half Rate or Full Rate"
VAL 	4 	CN_PACKET 	"Packet Channel (GPRS only)"

VALTAB 	VAL_pch_interrupt
VAL 	0 	NO_PCH_INTERRUPT 	"Power measurements with PCH listening"
VAL 	1 	PCH_INTERRUPT 	"Power measurements without PCH listening"

VALTAB 	VAL_freq_bands
VAL 	0x00 	BAND_AUTO 	"0b00000000: All bands shall be scanned"
VAL 	0x01 	BAND_GSM_900 	"0b00000001: GSM 900 is supported, shall be scanned"
VAL 	0x02 	BAND_DCS_1800 	"0b00000010: DCS 1800 is supported, shall be scanned"
VAL 	0x04 	BAND_PCS_1900 	"0b00000100: PCS 1900 is supported, shall be scanned"
VAL 	0x08 	BAND_E_GSM 	"0b00001000: Extended GSM is supported, shall be scanned"
VAL 	0x10 	BAND_GSM_850 	"0b00010000: GSM 850 is supported, shall be scanned"
VAL 	0x20 	BAND_GSM_450 	"0b00100000: GSM 450 is supported, shall be scanned"
VAL 	0x40 	BAND_GSM_480 	"0b01000000: GSM 480 is supported, shall be scanned"
VAL 	0x80 	BAND_R_GSM 	"0b10000000: R-GSM is supported, shall be scanned"
VAL 	0x03 	BAND_DUAL 	"0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned"
VAL 	0x0B 	BAND_DUAL_EXT 	"0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned"
VAL 	0x14 	BAND_DUAL_US 	"0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned"

VALTAB 	VAL_no
VAL 	1 - 8 	"valid values for number of RACH bursts to be sent"
VAL 	0 	NO_STP_SND_CONT_SND 	"stop sending of RACH bursts"

VALTAB 	VAL_t1
VAL 	0 - 31 	"frame number modulo 32"

VALTAB 	VAL_t2
VAL 	0 - 25 	"frame number modulo 26"

VALTAB 	VAL_t3
VAL 	0 - 50 	"frame number modulo 51"

VALTAB 	VAL_action
VAL 	0x00 	START_MON_NBCCH 	"start reading of BCCH, excluding ext BCCH"
VAL 	0x01 	START_MON_EBCCH 	"start reading of ext BCCH, excluding BCCH"
VAL 	0x02 	STOP_MON_BCCH 	"stop reading of BCCH, including both BCCH and ext BCCH (if previously requested)"
VAL 	0x03 	START_MON_CCCH 	"start reading of CCCH"
VAL 	0x04 	STOP_MON_CCCH 	"stop reading of CCCH"
VAL 	0x05 	LEAVING_PIM_PBCCH 	"Leave PIM"
VAL 	0x06 	LEAVING_PAM_PBCCH 	"Leave PAM"
VAL 	0x07 	LEAVING_PTM_PBCCH 	"Leave PTM"
VAL 	0x08 	ENTER_PTM_PBCCH 	"Enter PTM"
VAL 	0x09 	ENTER_PIM_PBCCH 	"Enter PIM"
VAL 	0x0A 	ENTER_PTM_BCCH 	"Enter PTM for BCCH"

VALTAB 	VAL_si_to_read
VAL 	0 	UNSPECIFIED_SI 	"Update of unspecified SI message or SI messages"
VAL 	1 	UPDATE_SI1 	"Update of SI1 message"
VAL 	2 	UPDATE_SI2_SI2BIS_OR_SI2TER 	"Update of SI2, SI2 bis or SI2 ter message"
VAL 	3 	UPDATE_SI3_SI4_SI7_OR_SI8 	"Update of SI3, SI4, SI7 or SI8 message"
VAL 	4 	UPDATE_SI9 	"Update of SI9 message"
VAL 	5 	COMPLETE_SI 	"Read complete SI"
VAL 	6 	UPDATE_SI13_GSM 	"Read SI13 during GPRS activation"
VAL 	255 	UPDATE_SI13 	"Update SI13"

VALTAB 	VAL_reorg_only
VAL 	0 	NORMAL_PGM 	"ignore this parameter (and do not ignore Page Mode IE in PAGING REQUEST messages); used to switch off REORG_ONLY"
VAL 	1 	REORG_ONLY 	"set page mode to paging reorganisation"

VALTAB 	VAL_sync_only
VAL 	0 	NORMAL_BA 	"normal GSM behaviour"
VAL 	1 	SYNC_LIST 	"GPRS sync only"
VAL 	2 	RECONFIRM_SYNC_LIST 	"Reconfirm Sync 10 sec timer for Pbcch Cells"

VALTAB 	VAL_gprs_sync
VAL 	0 	NORMAL_MEAS_REP 	"normal GSM behaviour"
VAL 	1 	SYNC_RESULTS 	"GPRS sync only"

VALTAB 	VAL_ba_id
VAL 	0 - 127 	"used by PL"
VAL 	128 - 255 	"used by RR"

VALTAB 	VAL_stat
VAL 	0 	STAT_INACT 	"inactive"
VAL 	1 	STAT_ACT 	"active"
VAL 	0 	STAT_CIPH_OFF 	"ciphering off"
VAL 	1 	STAT_CIPH_ON 	"ciphering on"

VALTAB 	VAL_eotd_res
VAL 	0 	EOTD_SUCC 	"success"
VAL 	1 	EOTD_REF 	"wrong reference BTS"

VALTAB 	VAL_mfrm_offset
VAL 	0 - 51 	"multiframes/ 51 is interpreted as 0"

VALTAB 	VAL_otd_type
VAL 	0 	ROUGH_OTD 	"only roughOTD has been provided by the NW"
VAL 	1 	EXPECTED_OTD 	"only expectedOTD has been provided by the NW"
VAL 	2 	BOTH_OTD 	"Both OTD type have been provided by the NW"

VALTAB 	VAL_exp_otd
VAL 	0 - 1250 	"The used resolution is 1 bits. This OTD value is the OTD value of TS0s (i.e. the difference in starting of TS0), not only the OTD between starts of bursts expected OTD between the scell and the specified cell. Note: 1250 is interpreted as 0"

VALTAB 	VAL_uncertainty
VAL 	0 	UNC_MAX_2BIT 	"uncertainty in bits. 0 - 2 bits"
VAL 	1 	UNC_MAX_4BIT 	"uncertainty in bits. 3 - 4 bits"
VAL 	2 	UNC_MAX_8BIT 	"uncertainty in bits. 5 - 8 bits"
VAL 	3 	UNC_MAX_12BIT 	"uncertainty in bits. 9 - 12 bits"
VAL 	4 	UNC_MAX_16BIT 	"uncertainty in bits. 13 - 16 bits"
VAL 	5 	UNC_MAX_22BIT 	"uncertainty in bits. 17 - 22 bits"
VAL 	6 	UNC_MAX_30BIT 	"uncertainty in bits. 23 - 30 bits"
VAL 	7 	UNC_GT_30BIT 	"uncertainty in bits.  > 30 bits"

VALTAB 	VAL_rough_rtd
VAL 	0 	 	"roughRTD in bits (see expected OTD)"

VALTAB 	VAL_eotd_avail
VAL 	0 	 	"EOTD is not available"
VAL 	1 	 	"EOTD is available"

VALTAB 	VAL_gprs_support
VAL 	1 	MPH_GPRS_PROCS_USED 	"yes"
VAL 	0 	MPH_GPRS_PROCS_NOT_USED 	"no"

VALTAB 	VAL_si_to_clean
VAL 	0x0001 	IND_SI_1 	"Clean SI 1 buffer"
VAL 	0x0002 	IND_SI_2 	"Clean SI 2 buffer"
VAL 	0x0004 	IND_SI_2BIS 	"Clean SI 2bis buffer"
VAL 	0x0008 	IND_SI_2TER 	"Clean SI 2ter buffer"
VAL 	0x0010 	IND_SI_3 	"Clean SI 3 buffer"
VAL 	0x0020 	IND_SI_4 	"Clean SI 4 buffer"
VAL 	0x0040 	IND_SI_13 	"Clean SI 13 buffer"
VAL 	0x0100 	IND_SI_5 	"Clean SI 5 buffer"
VAL 	0x0200 	IND_SI_5BIS 	"Clean SI 5bis buffer"
VAL 	0x0400 	IND_SI_5TER 	"Clean SI 5ter buffer"
VAL 	0x0800 	IND_SI_6 	"Clean SI 6 buffer"
VAL 	0x007F 	IND_ALL_IDLE_SI 	"Clean all SI of idle mode"
VAL 	0x000E 	IND_ALL_IDLE_BA 	"Clean all SI of idle mode BA list"
VAL 	0x0F00 	IND_ALL_DEDI_SI 	"Clean all SI of dedicated  mode"
VAL 	0x0700 	IND_ALL_DEDI_BA 	"Clean all SI of dedicated  mode BA list"
VAL 	0x0F7F 	IND_ALL_SI 	"Clean all SI buffers"

VALTAB 	VAL_cause
VAL 	0x0 	NC_STOP_MEAS 	"Stop the measurement"
VAL 	0x1 	NC_START_MEAS 	"Start Averaging the measurements"
VAL 	0x2 	NC_REPORT_MEAS  	"get the meas report from RR"

VALTAB 	VAL_region
VAL 	0 	EUROPEAN_REGION 	"Indicates European region"
VAL 	1 	AMERICAN_REGION 	"Indicates American region"

VALTAB 	VAL_search_mode
VAL 	0x00 	FULL_SEARCH_MODE 	"Identifies 'Full Search' mode, default mode"
VAL 	0x01 	NORMAL_SEARCH_MODE 	"Identifies 'Normal Search' mode"
VAL 	0x02 	FAST_SEARCH_MODE 	"Identifies 'Fast Search' mode"
VAL 	0x03 	BLACK_LIST_SEARCH_MODE 	"Identifies 'Black List Search' mode"

VALTAB 	VAL_whitelist_valid
VAL 	0 	WHITELIST_NOT_VALID 	"not valid"
VAL 	1 	WHITELIST_VALID 	"valid"




VAR 	arfcn 	"channel number" 	S

VAL 	@p_mph - VAL_arfcn@ 	

VAR 	ma 	"channel number in the mobile allocation list (used with frequency hopping)" 	S

VAL 	@p_mph - VAL_arfcn@ 	

VAR 	ext_bcch 	"unused, reserved" 	B


VAR 	comb_ccch 	"extended BCCH listening" 	B

VAL 	@p_mph - VAL_comb_ccch@ 	

VAR 	tn 	"timeslot number" 	B

VAL 	@p_mph - VAL_tn@ 	

VAR 	dlt 	"downlink initial value" 	B

VAL 	@p_mph - VAL_dlt@ 	

VAR 	pg 	"paging group" 	B

VAL 	@p_mph - VAL_pg@ 	

VAR 	bs_ag_blocks_res 	"blocks reserved for AGCH" 	B

VAL 	@p_mph - VAL_bs_ag_blocks_res@ 	

VAR 	bs_pa_mfrms 	"Multiframe Period" 	B

VAL 	@p_mph - VAL_bs_pa_mfrms@ 	

VAR 	power 	"transmission power level" 	B

VAL 	@p_mph - VAL_power@ 	

VAR 	rx_lev 	"received field strength" 	B

VAL 	@p_mph - VAL_rx_lev@ 	

VAR 	rx_lev_full 	"received field strength" 	B


VAR 	rx_lev_sub 	"received field strength" 	B


VAR 	rx_qual_full 	"received quality" 	B

VAL 	@p_mph - VAL_rx_qual_full@ 	

VAR 	rx_qual_sub 	"received quality" 	B


VAR 	bsic 	"base station identification code" 	B

VAL 	@p_mph - VAL_bsic@ 	

VAR 	dtx 	"discontinuous transmission" 	B

VAL 	@p_mph - VAL_dtx@ 	

VAR 	otd 	"timing advance" 	S

VAL 	@p_mph - VAL_otd@ 	

VAR 	ta 	"timing advance" 	B

VAL 	@p_mph - VAL_ta@ 	

VAR 	time_alignmt 	"timing alignment; refers to difference in time between serving and neighbour cell" 	L


VAR 	frame_offset 	"frame offset; refers to difference in time between serving and neighbour cell" 	L


VAR 	v_start 	"starting time valid" 	B

VAL 	@p_mph - VAL_v_start@ 	

VAR 	ch 	"channel type" 	B

VAL 	@p_mph - VAL_ch@ 	

VAR 	tsc 	"trainings sequence code" 	B

VAL 	@p_mph - VAL_tsc@ 	

VAR 	h 	"hopping" 	B

VAL 	@p_mph - VAL_h@ 	

VAR 	maio 	"mobile allocation index offset" 	B

VAL 	@p_mph - VAL_maio@ 	

VAR 	hsn 	"hopping sequence number" 	B

VAL 	@p_mph - VAL_hsn@ 	

VAR 	rlt 	"radio link timeout" 	B

VAL 	@p_mph - VAL_rlt@ 	

VAR 	tav 	"timing advance" 	B

VAL 	@p_mph - VAL_tav@ 	

VAR 	pwrc 	"power control indicator" 	B

VAL 	@p_mph - VAL_pwrc@ 	

VAR 	algo 	"Algorithm" 	B

VAL 	@p_mph - VAL_algo@ 	

VAR 	kc 	"Kc value; the format in the GTI case is as on the SIM; the least significant bit of kc is the least significant bit of the eighth byte; the most significant bit of kc is the most significant bit of the first byte." 	B


VAR 	mod 	"idle / dedicated mode scenario" 	B

VAL 	@p_mph - VAL_mod@ 	

VAR 	mode 	"channel mode" 	B

VAL 	@p_mph - VAL_mode@ 	

VAR 	nscb 	"noise suppression control bit" 	B


VAR 	icmi 	"initial code mode indicator" 	B


VAR 	st_mode 	"initial code mode" 	B

VAL 	@p_mph - VAL_st_mode@ 	

VAR 	acs 	"active codec set" 	B


VAR 	v_cod_prop 	"valid flag codec properties" 	B


VAR 	c_cod_prop 	"counter" 	B


VAR 	codec_thr 	"Codec threshold" 	B


VAR 	codec_hyst 	"Codec hysteresis" 	B


VAR 	cs 	"cause" 	B

VAL 	@p_mph - VAL_cs@ 	

VAR 	pclass 	"power class" 	B

VAL 	@p_mph - VAL_pclass@ 	

VAR 	pclass2 	"power class 2" 	B


VAR 	fn_offset 	"TDMA Frame Offset" 	S


VAR 	tch_loop 	"TCH loop command" 	B

VAL 	@p_mph - VAL_tch_loop@ 	

VAR 	dedi_res 	"dedicated configuration result" 	B

VAL 	@p_mph - VAL_dedi_res@ 	

VAR 	device 	"DAI testing device" 	B

VAL 	@p_mph - VAL_device@ 	

VAR 	ho_ref 	"reference" 	B


VAR 	ho_pow 	"transmission power level" 	B

VAL 	@p_mph - VAL_ho_pow@ 	

VAR 	ho_acc_type 	"access type" 	B

VAL 	@p_mph - VAL_ho_acc_type@ 	

VAR 	ho_nci 	"normal cell indication" 	B

VAL 	@p_mph - VAL_ho_nci@ 	

VAR 	param 	"dummy parameter" 	B


VAR 	valid 	"valid flag" 	B


VAR 	multi_band 	"multiband report parameter" 	B

VAL 	@p_mph - VAL_multi_band@ 	

VAR 	len_imsi 	"Length of IMSI" 	B

VAL 	@p_mph - VAL_len_imsi@ 	

VAR 	imsi 	"IMSI digits" 	B


VAR 	v_tmsi 	"Valid TMSI flag" 	B


VAR 	tmsi 	"Binary TMSI representatino" 	L


VAR 	v_ptmsi 	"Valid PTMSI flag; can indicate'valid'only for the GPRS supporting terminal" 	B


VAR 	ptmsi 	"Binary PTMSI representatino" 	L


VAR 	v_ptmsi2 	"Valid PTMSI flag; can indicate'valid'only for the GPRS supporting terminal" 	B


VAR 	ptmsi2 	"Binary PTMSI representatino" 	L


VAR 	identity_type 	"Identity type" 	B

VAL 	@p_mph - VAL_identity_type@ 	

VAR 	channel_needed 	"Channel needed" 	B

VAL 	@p_mph - VAL_channel_needed@ 	

VAR 	pch_interrupt 	"PCH Interrupt" 	B

VAL 	@p_mph - VAL_pch_interrupt@ 	

VAR 	freq_bands 	"Bitmap of frequency bands" 	B

VAL 	@p_mph - VAL_freq_bands@ 	

VAR 	num_of_chan 	"Number of detected channels" 	B


VAR 	c 	"dummy; unused, reserved" 	B


VAR 	no 	"number of RACH messages; this number includes re-transmissions and the first, initial RACH burst, i.e. no = M +1, where M is as defined in GSM 04.08's specification of the initiation of the immediate assignment procedure" 	B

VAL 	@p_mph - VAL_no@ 	

VAR 	delta 	"time in TDMA frames between bursts; delta[0]corresponds to the time between MPH_RANDOM_ACCESS_REQ and the first RACH burst, delta[1]to the time between the first and the 2nd RACH burst and so on" 	B


VAR 	rach 	"channel request content burst n; rach[0]corresponds to the contents of the first RACH burst, rach[1]to the 2nd and so on" 	B


VAR 	t1 	"reduced frame number modula 32" 	B

VAL 	@p_mph - VAL_t1@ 	

VAR 	t2 	"reduced frame number modula 26" 	B

VAL 	@p_mph - VAL_t2@ 	

VAR 	t3 	"reduced frame number modula 51" 	B

VAL 	@p_mph - VAL_t3@ 	

VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content; comment as in PH SAP" 	B


VAR 	ncc_permitted 	"NCC permitted bitmap" 	B


VAR 	action 	"start or stop reading of BCCH resp. CCCH" 	B

VAL 	@p_mph - VAL_action@ 	

VAR 	si_to_read 	"SI to read" 	B

VAL 	@p_mph - VAL_si_to_read@ 	

VAR 	fn 	"full frame number; format: absolute frame number" 	L


VAR 	no_of_ncells 	"Number of ncells" 	B


VAR 	reorg_only 	"specifies if reorg should be used" 	B

VAL 	@p_mph - VAL_reorg_only@ 	

VAR 	sync_only 	"specifies if only sync is used" 	B

VAL 	@p_mph - VAL_sync_only@ 	

VAR 	gprs_sync 	"specifies sync results" 	B

VAL 	@p_mph - VAL_gprs_sync@ 	

VAR 	ba_id 	"link frequency list and measurement report" 	B

VAL 	@p_mph - VAL_ba_id@ 	

VAR 	stat 	"status" 	B

VAL 	@p_mph - VAL_stat@ 	

VAR 	eotd_crosscor 	"Cross correlation" 	T


VAR 	eotd_res 	"EOTD Result" 	B

VAL 	@p_mph - VAL_eotd_res@ 	

VAR 	req_id 	"Request Identifier" 	S


VAR 	d_eotd_nrj 	"Sum of Amplitudes" 	L


VAR 	time_tag 	"Time tag" 	L


VAR 	sb_flag 	"Valid flag" 	B


VAR 	mfrm_offset 	"multiframe offset" 	B

VAL 	@p_mph - VAL_mfrm_offset@ 	

VAR 	otd_type 	"OTD type" 	B

VAL 	@p_mph - VAL_otd_type@ 	

VAR 	exp_otd 	"expectedOTD" 	S

VAL 	@p_mph - VAL_exp_otd@ 	

VAR 	uncertainty 	"Uncertainty of expected OTD" 	B

VAL 	@p_mph - VAL_uncertainty@ 	

VAR 	rough_rtd 	"rough RTD" 	S

VAL 	@p_mph - VAL_rough_rtd@ 	

VAR 	eotd_avail 	"eotd avail" 	B

VAL 	@p_mph - VAL_eotd_avail@ 	

VAR 	gprs_support 	"GPRS" 	B

VAL 	@p_mph - VAL_gprs_support@ 	

VAR 	si_to_clean 	"SI to clean" 	S

VAL 	@p_mph - VAL_si_to_clean@ 	

VAR 	cause 	"Meas report" 	B

VAL 	@p_mph - VAL_cause@ 	

VAR 	bcch_rxlev_of_sc 	"This is the rxlev of BCCH channel. Used only in dedicated mode" 	B


VAR 	region 	"Indicates whether 'White List'belongs to European or American region" 	B

VAL 	@p_mph - VAL_region@ 	

VAR 	search_mode 	"Basic Element" 	B

VAL 	@p_mph - VAL_search_mode@ 	

VAR 	white_list_valid 	"Indicates whether 'White List' is valid or not" 	B

VAL 	@p_mph - VAL_whitelist_valid@ 	

VAR 	channels 	"Stores list of ARFCNS" 	B


VAR 	num_of_white_list_chan 	"The number of 'White List'carriers included in the list" 	B


VAR 	num_of_carriers 	"Number of carriers to be removed from the Black List" 	B


VAR 	lower_rxlevel_threshold 	"lower rxlevel thershold for GSM channels" 	B





COMP 	cbch 	 "cell broadcast channel"
{
 	stat 	 ; CBCH status; binary state
 	ch 	 ; channel type
 	tn 	 ; timeslot number
 	tsc 	 ; training sequence code
 	h 	 ; hopping
 	arfcn 	 ; channel number; valid only if h=0
 	maio 	 ; mobile allocation index offset; valid only if h=1
 	hsn 	 ; hopping sequence number; valid only if h=1
 	ma 	[MAX_MA_CHANNELS] 	 ; mobile allocation list; valid only if h=1; coding as arfcn field above; determines the (maximum) size of mobile allocation list; the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
}



COMP 	ncells 	 "neighbour cell measurement results"
{
 	no_of_ncells 	 ; number of neighbour cells; semantics as in 47
 	arfcn 	[6] 	 ; channel number; semantics as in 4.1
 	rx_lev 	[6] 	 ; received field strength; semantics as in 4.11
 	bsic 	[6] 	 ; base station identification code; semantics as in 4.13
 	time_alignmt 	[6] 	 ; timing alignment; refers to difference in time between serving and neighbour cell
 	frame_offset 	[6] 	 ; frame offset; refers to difference in time between serving and neighbour cell
}



COMP 	start 	 "starting time"
{
 	v_start 	 ; starting time valid
 	t1 	 ; frame number modulo 32
 	t2 	 ; frame number modulo 26
 	t3 	 ; frame number modulo 51
}



COMP 	ch_type 	 "channel type configuration"
{
 	ch 	 ; channel type
 	tn 	 ; timeslot number
 	tsc 	 ; training sequence code
 	h 	 ; hopping
 	arfcn 	 ; channel number; valid only if h=0
 	maio 	 ; mobile allocation index offset; valid only if h=1
 	hsn 	 ; hopping sequence number; valid only if h=1
 	ma 	[MAX_MA_CHANNELS] 	 ; mobile allocation list; valid  only if h=1; coding as arfcn field above; determines the (maximum) size of mobile allocation list; the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
}
TYPEDEF COMP ch_type 	ch_type2 	 "channel type"



COMP 	tr_para 	 "transmission parameter"
{
 	power 	 ; transmission power level
 	dtx 	 ; discontinuous transmission
 	rlt 	 ; radio link timeout
 	tav 	 ; timing advance
 	pwrc 	 ; power control indicator
 	mode 	 ; channel mode
}



COMP 	ciph 	 "ciphering parameters"
{
 	stat 	 ; Ciphering Status; binary state
 	algo 	 ; Algorithm
 	kc 	[KC_STRING_SIZE] 	 ; Kc value; the format in the GTI case is as on the SIM; the least significant bit of kc is the least significant bit of the eighth byte; the most significant bit of kc is the most significant bit of the first byte.
}



COMP 	cod_prop 	 "codec properties"
{
 	codec_thr 	 ; Codec threshold
 	codec_hyst 	 ; Codec hysteresis
}



COMP 	amr_conf 	 "Parameters for AMR"
{
 	nscb 	 ; noise suppression control bit
 	icmi 	 ; initial code mode indicator
 	st_mode 	 ; initial code mode
 	acs 	 ; active codec set
 	v_cod_prop 	 ; valid flag codec properties
 	c_cod_prop 	 ; counter
 	cod_prop 	[3] 	 ; codec properties
}



COMP 	classmark 	 "classmark"
{
 	pclass 	 ; power class
 	pclass2 	 ; power class 2
}



COMP 	ho_param 	 "handover parameter"
{
 	ho_ref 	 ; reference
 	ho_pow 	 ; transmission power level
 	ho_acc_type 	 ; access type
 	ho_nci 	 ; normal cell indication
}



COMP 	mid 	 "Mobile identities"
{
 	len_imsi 	 ; Length of IMSI
 	imsi 	[15] 	 ; IMSI digits
 	v_tmsi 	 ; Valid TMSI flag
 	tmsi 	 ; Binary TMSI representatino
 	v_ptmsi 	 ; Valid PTMSI flag; can indicate'valid'only for the GPRS supporting terminal
 	ptmsi 	 ; Binary PTMSI representatino
 	v_ptmsi2 	 ; Valid PTMSI flag; can indicate'valid'only for the GPRS supporting terminal
 	ptmsi2 	 ; Binary PTMSI representatino
}



COMP 	send_mode 	 "RACH sending mode"
{
 	c 	 ; dummy; unused, reserved
 	no 	 ; number of RACH messages; this number includes re-transmissions and the first, initial RACH burst, i.e. no = M +1, where M is as defined in GSM 04.08's specification of the initiation of the immediate assignment procedure
 	delta 	[MAX_RACH_REQ] 	 ; time in TDMA frames between bursts; delta[0]corresponds to the time between MPH_RANDOM_ACCESS_REQ and the first RACH burst, delta[1]to the time between the first and the 2nd RACH burst and so on
 	rach 	[MAX_RACH_REQ] 	 ; channel request content burst n; rach[0]corresponds to the contents of the first RACH burst, rach[1]to the 2nd and so on
}



COMP 	frame_no 	 "reduced frame number"
{
 	t1 	 ; frame number modulo 32
 	t2 	 ; frame number modulo 26
 	t3 	 ; frame number modulo 51
}



COMP 	sdu 	 "Service Data Unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content; comment as in PH SAP
}



COMP 	meas_results 	 "neighbourcell measurement results"
{
 	arfcn 	 ; channel number
 	rx_lev 	 ; received field strength
}



COMP 	eotd_sc_res 	 "EOTD SC Results at start of measurement"
{
 	sb_flag 	 ; Valid flag; named 'Data Valid' by cursor task
 	bsic 	 ; base station identity code
 	arfcn 	 ; channel number
 	eotd_crosscor 	[XCOR_NO] 	 ; Cross correlation
 	d_eotd_nrj 	 ; Sum of Amplitudes; named 'RSSI' by cursor task
 	time_tag 	 ; Time tag; named 'Nominal Position' by cursor task
}
TYPEDEF COMP eotd_sc_res 	eotd_sc_res1 	 "EOTD SC Results at stop of measurement"
TYPEDEF COMP eotd_sc_res 	eotd_nc_res 	 "EOTD NC Results"



COMP 	ncell_eotd 	 "Parameters of a neighbour cell"
{
 	arfcn 	 ; channel number
 	bsic 	 ; Bsic
 	mfrm_offset 	 ; multiframe offset
 	otd_type 	 ; otd type
 	exp_otd 	 ; expected otd
 	uncertainty 	 ; uncertainty of exp. otd
 	rough_rtd 	 ; rough rtd
}



COMP 	meas_rep 	 "meas report to RR"
{
 	arfcn 	 ; channel number
 	bsic 	 ; values for bsic
 	rx_lev 	 ; received field strength
}



COMP 	list 	 "stores a list of frequencies"
{
 	channels 	[LIST_MAX_SIZE] 	 ; stores a list of frequencies
}



COMP 	black_list 	 "Contains a separate  bit map of  Black Listed carries for Euro / American regions"
{
 	list 	[MAX_REGIONS] 	 ; Primitive structure element item
}



COMP 	white_list 	 "contains the bitmap of carriers present in the 'White List'"
{
 	white_list_valid 	 ; Indicates whether 'White List' is valid or not
 	region 	 ; Indicates whether 'White List'belongs to European or American region
 	list 	 ; stores a list of frequencies
}



COMP 	inactive_carrier_list 	 "Contains the bitmap of inactive carriers in the current location"
{
 	list 	[MAX_REGIONS] 	 ; Bitmap of GSM channels
}






; MPH_POWER_REQ 	0x5715
; MPH_POWER_CNF 	0x1707
; MPH_BSIC_REQ 	0x5716
; MPH_BSIC_CNF 	0x1708
; MPH_UNITDATA_IND 	0x1709
; MPH_RANDOM_ACCESS_REQ 	0x5717
; MPH_RANDOM_ACCESS_CNF 	0x170A
; MPH_IDLE_REQ 	0x5703
; MPH_MEASUREMENT_IND 	0x1701
; MPH_NEIGHBOURCELL_REQ 	0x5704
; MPH_DEDICATED_REQ 	0x5706
; MPH_DEDICATED_CNF 	0x1702
; MPH_DEDICATED_FAIL_REQ 	0x5707
; MPH_DEDICATED_FAIL_CNF 	0x1703
; MPH_CIPHERING_REQ 	0x5708
; MPH_FREQ_REDEF_REQ 	0x5709
; MPH_CHANNEL_MODE_REQ 	0x570A
; MPH_ERROR_IND 	0x1704
; MPH_DEACTIVATE_REQ 	0x570B
; MPH_CLASSMARK_REQ 	0x570C
; MPH_TCH_LOOP_REQ 	0x5711
; MPH_DAI_REQ 	0x5712
; MPH_CBCH_REQ 	0x5713
; MPH_IDENTITY_REQ 	0x5714
; MPH_PAGING_IND 	0x1706
; MPH_MON_CTRL_REQ 	0x5718
; MPH_SYNC_REQ 	0x5719
; MPH_SYNC_IND 	0x170B
; MPH_MEAS_ORDER_CNF 	0x170C
; MPH_EMO_REQ 	0x5705
; MPH_EMO_MEAS_IND 	0x1705
; MPH_EXT_MEAS_REQ 	0x570D
; MPH_EXT_MEAS_CNF 	0x170D
; MPH_NCELL_POS_REQ 	0x570E
; MPH_NCELL_POS_IND 	0x170E
; MPH_CLEAN_BUF_REQ 	0x571A
; MPH_STOP_DEDICATED_REQ 	0x571B
; MPH_STOP_DEDICATED_CNF 	0x170F
; MPH_MEAS_REP_REQ 	0x571C
; MPH_MEAS_REP_CNF 	0x1710



PRIM 	MPH_POWER_REQ 	0x5715
{
 	pch_interrupt 	 ; pch interrupt
 	freq_bands 	 ; frequency bands; used since support of 'PCS 1900 channels'
 	search_mode 	 ; Search mode 
 	lower_rxlevel_threshold 	[MAX_NUM_BANDS] 	 ; Lower Rxlev Threshold
 	black_list 	 ; List of Black Listed carriers
 	white_list 	 ; List of carriers in White List
}






PRIM 	MPH_POWER_CNF 	0x1707
{
 	num_of_chan 	 ; Number of channels
 	num_of_white_list_chan 	 ; Number of White list channels
 	arfcn 	[MAX_CHANNELS] 	 ; cell channel numbers
 	rx_lev 	[MAX_CHANNELS] 	 ; field strength
 	inactive_carrier_list 	 ; List of inactive carriers
}






PRIM 	MPH_BSIC_REQ 	0x5716
{
 	arfcn 	 ; channel number
}






PRIM 	MPH_BSIC_CNF 	0x1708
{
 	arfcn 	 ; channel number
 	bsic 	 ; base station identification code
 	cs 	 ; cause / error code; The following causes can occur within this primitive: CS_NO_ERROR, CS_NO_BCCH_AVAIL
}






PRIM 	MPH_UNITDATA_IND 	0x1709
{
 	arfcn 	 ; channel number
 	fn 	 ; full frame number
 	sdu 	 ; service data unit
}






PRIM 	MPH_RANDOM_ACCESS_REQ 	0x5717
{
 	send_mode 	 ; RACH sending mode
}






PRIM 	MPH_RANDOM_ACCESS_CNF 	0x170A
{
 	frame_no 	 ; reduced frame number
}






PRIM 	MPH_IDLE_REQ 	0x5703
{
 	mod 	 ; idle mode scenario; the following mod values can occur within this primitive: MODE_CELL_SELECTION, MODE_CELL_RESELECTION, MODE_SYS_INFO_CHANGE, MODE_PACKET_TRANSFER (GPRS only), MODE_CELL_CHANGE_ORDER (GPRS only)
 	arfcn 	 ; channel number
 	ext_bcch 	 ; dummy; unused, reserved
 	comb_ccch 	 ; combined CCCH
 	tn 	 ; timeslot
 	dlt 	 ; downlink timeout
 	pg 	 ; paging group
 	bs_ag_blocks_res 	 ; AGCH blocks reserved
 	bs_pa_mfrms 	 ; multiframe period
 	power 	 ; transmission power level
 	ncc_permitted 	 ; NCC permitted
 	reorg_only 	 ; page mode override; for a GSM only terminal the value is always NORMAL_PGM
 	eotd_avail 	 ; EOTD available
 	gprs_support 	 ; Cell supports GPRS; (GPRS only)
}






PRIM 	MPH_MEASUREMENT_IND 	0x1701
{
 	arfcn 	 ; channel number; refers to serving cell
 	rx_lev_full 	 ; received full field strength; refers to serving cell
 	rx_lev_sub 	 ; received sub field strength; refers to serving cell
 	rx_qual_full 	 ; received full quality; refers to serving cell
 	rx_qual_sub 	 ; received sub quality; refers to serving cell
 	dtx 	 ; use of DTX; refers to serving cell
 	otd 	 ; timing advance; refers to serving cell (short name otd, although misleading, is kept only for backwards compatibility reasons); used in GSM dedicated mode
 	valid 	 ; valid flag; refers to both serving and neighbour cells, i.e. the entire report; set to valid except for first measurement indications after an update of the BA list
 	fn_offset 	 ; TDMA frame offset; used for  C2 calculation
 	ncells 	 ; neighbour cell measurement results; referring to neighbour cells
 	gprs_sync 	 ; GPRS synchronisation results; referring to neighbour cells; for a GSM only terminal the value is always NORMAL_MEAS_REP
 	bcch_rxlev_of_sc 	 ; rxlev of SC BCCH channel. Used in dedicated mode, to distinguish between rxlev of traffic channel and BCCH channel.
}






PRIM 	MPH_NEIGHBOURCELL_REQ 	0x5704
{
 	multi_band 	 ; multi-band report parameter; fed from SYSTEM INFORMATION 2ter's / 5ter's neighbour cell description 2 IE
 	arfcn 	[MAX_NEIGHBOURCELLS] 	 ; neighbour cell channel numbers; the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
 	sync_only 	 ; GPRS synchronisation only; for a GSM only terminal the value is always NORMAL_BA
}






PRIM 	MPH_DEDICATED_REQ 	0x5706
{
 	mod 	 ; dedicated mode scenario; the following mod values can occur within this primitive: MODE_IMM_ASSIGN, MODE_CHAN_ASSIGN, MODE_ASYNC_HANDOVER, MODE_SYNC_HANDOVER, MODE_PRE_SYNC_HANDOVER, MODE_PSEUDO_SYNC_HANDOVER, MODE_SYS_INFO_CHANGE, MODE_PDCH_ASSIGN (GPRS only)
 	start 	 ; starting time; validity can be indicated within the element by a valid flag
 	ch_type 	 ; channel type after time
 	ch_type2 	 ; channel type before time; invalidity of the entire element including sub-elements can be indicated by a sub-element channel type ch being equal to 0xFF = NOT_PRESENT_8BIT
 	arfcn 	 ; BCCH channel number
 	bsic 	 ; base station identification code
 	ho_param 	 ; handover parameter
 	tr_para 	 ; transmission parameter
 	ciph 	 ; ciphering parameters
 	amr_conf 	 ; AMR configuration
}






PRIM 	MPH_DEDICATED_CNF 	0x1702
{
 	dedi_res 	 ; dedicated result
}






PRIM 	MPH_DEDICATED_FAIL_REQ 	0x5707
{
 	param 	 ; dummy parameter
}






PRIM 	MPH_DEDICATED_FAIL_CNF 	0x1703
{
 	param 	 ; dummy parameter
}






PRIM 	MPH_CIPHERING_REQ 	0x5708
{
 	ciph 	 ; ciphering parameters
}






PRIM 	MPH_FREQ_REDEF_REQ 	0x5709
{
 	start 	 ; starting time
 	ch_type 	 ; channel description
}






PRIM 	MPH_CHANNEL_MODE_REQ 	0x570A
{
 	mode 	 ; channel mode
 	ch 	 ; channel type
 	amr_conf 	 ; AMR configuration
}






PRIM 	MPH_ERROR_IND 	0x1704
{
 	cs 	 ; cause; The following causes can occur within this primitive: CS_DOWN_LINK_FAIL, CS_RADIO_LINK_FAIL, CS_BCCH_READ_ERROR
 	arfcn 	 ; channel number
}






PRIM 	MPH_DEACTIVATE_REQ 	0x570B
{
 	param 	 ; dummy parameter
}






PRIM 	MPH_CLASSMARK_REQ 	0x570C
{
 	classmark 	 ; classmark
}






PRIM 	MPH_TCH_LOOP_REQ 	0x5711
{
 	tch_loop 	 ; loop command
}






PRIM 	MPH_DAI_REQ 	0x5712
{
 	device 	 ; dai device
}






PRIM 	MPH_CBCH_REQ 	0x5713
{
 	cbch 	 ; cell broadcast channel
}






PRIM 	MPH_IDENTITY_REQ 	0x5714
{
 	mid 	 ; Mobile identities
}






PRIM 	MPH_PAGING_IND 	0x1706
{
 	identity_type 	 ; Identity type
 	channel_needed 	 ; Channel needed
}






PRIM 	MPH_MON_CTRL_REQ 	0x5718
{
 	action 	 ; Control action
 	si_to_read 	 ; SI to read
}






PRIM 	MPH_SYNC_REQ 	0x5719
{
 	cs 	 ; Cause; The following causes can occur within this primitive: CS_STOP_BCCH_READING, CS_STOP_PLMN_SEARCH, CS_STOP_PLMN_SEARCH_AND_DEACTIVATE, CS_CLEAN_SYS_INFO, CS_RXLEV_VAL_REQ (GPRS only)
}






PRIM 	MPH_SYNC_IND 	0x170B
{
 	cs 	 ; cause; The following causes can occur within this primitive: CS_SYS_INFO_1_NOT_NEEDED
 	arfcn 	 ; Channel number
}






PRIM 	MPH_MEAS_ORDER_CNF 	0x170C
{
 	no_of_ncells 	 ; number of ncells
 	meas_results 	[MAX_NEIGHBOURCELLS] 	 ; measurement results; the list is delimited with 0xFFFF = NOT_PRESENT_16BIT (except if all entries are used)
}






PRIM 	MPH_EMO_REQ 	0x5705
{
 	ba_id 	 ; reference number
 	arfcn 	[0..MAX_EMO_CHANNELS] 	 ; frequencies to be measured
}






PRIM 	MPH_EMO_MEAS_IND 	0x1705
{
 	ba_id 	 ; reference number
 	dtx 	 ; discontinuous transmission
 	meas_results 	[0..MAX_EMO_CHANNELS+1] 	 ; measurement results
}






PRIM 	MPH_EXT_MEAS_REQ 	0x570D
{
 	pch_interrupt 	 ; pch interrupt
 	freq_bands 	 ; frequency bands
 	num_of_chan 	 ; Number of channels
 	arfcn 	[MAX_CHANNELS] 	 ; cell channel numbers
}






PRIM 	MPH_EXT_MEAS_CNF 	0x170D
{
 	num_of_chan 	 ; Number of channels
 	num_of_white_list_chan 	 ; Number of White list channels
 	arfcn 	[MAX_CHANNELS] 	 ; cell channel numbers
 	rx_lev 	[MAX_CHANNELS] 	 ; field strength
 	inactive_carrier_list 	 ; List of inactive carriers
}






PRIM 	MPH_NCELL_POS_REQ 	0x570E
{
 	req_id 	 ; Request Ident
 	ncell_eotd 	[1..MAX_NCELL_EOTD_ALR] 	 ; Neighbour Cell List
}






PRIM 	MPH_NCELL_POS_IND 	0x170E
{
 	req_id 	 ; Request Ident
 	eotd_res 	 ; EOTD Result
 	ta 	 ; Timing Advance
 	fn 	 ; Frame Number
 	eotd_sc_res 	 ; EOTD SC Results
 	eotd_sc_res1 	 ; EOTD SC Results
 	eotd_nc_res 	[1.. MAX_NCELL_EOTD_RES] 	 ; EOTD NC Results
}






PRIM 	MPH_CLEAN_BUF_REQ 	0x571A
{
 	si_to_clean 	 ; SI to clean
}






PRIM 	MPH_STOP_DEDICATED_REQ 	0x571B
{
 	param 	 ; dummy
}






PRIM 	MPH_STOP_DEDICATED_CNF 	0x170F
{
 	param 	 ; dummy
}






PRIM 	MPH_MEAS_REP_REQ 	0x571C
{
 	cause 	 ; Meas req to ALR
}






PRIM 	MPH_MEAS_REP_CNF 	0x1710
{
 	meas_rep 	[RR_ALR_MEAS_REPORT_SIZE] 	 ; Primitive Item
}