FreeCalypso > hg > fc-magnetite
view src/aci2/aci/cmh_mmq.c @ 378:aee911923299
components/*: support for c11x target
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 13 Jan 2018 18:21:16 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS (6147) | Modul : CMH_MMQ +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This module provides the query functions related to the | protocol stack adapter for mobility management. +----------------------------------------------------------------------------- */ #ifndef CMH_MMQ_C #define CMH_MMQ_C #endif #include "aci_all.h" /*==== INCLUDES ===================================================*/ #include "aci_cmh.h" #include "ati_cmd.h" #include "aci_cmd.h" #include "aci.h" #ifdef FAX_AND_DATA #include "aci_fd.h" #endif /* of #ifdef FAX_AND_DATA */ #include "pcm.h" #include "psa.h" #include "psa_mm.h" #include "psa_util.h" #include "cmh.h" #include "cmh_mm.h" #include "rx.h" #include "rtc.h" #ifdef FF_TIMEZONE #include "rv/rv_general.h" #include "rtc/rtc_tz.h" #endif #ifdef GPRS #include "gaci_cmh.h" #include "psa_gmm.h" #endif #ifndef _SIMULATION_ /******************************/ /* just to get FFS !!!! */ /* TEMPORARY until use of NVM */ #ifndef GPRS #define DONT_LET_FFSH2_DEF_GPRS #endif #include "ffs/ffs.h" /* check whether latter has defined GPRS !!! */ #ifdef DONT_LET_FFSH2_DEF_GPRS #undef GPRS #endif #undef DONT_LET_FFSH2_DEF_GPRS /***************************/ #endif /* _SIMULATION_ */ /*==== CONSTANTS ==================================================*/ /*==== EXPORT =====================================================*/ /*==== VARIABLES ==================================================*/ #if defined (GPRS) && defined (DTI) EXTERN T_GMM_SHRD_PRM gmmShrdPrm; #endif EXTERN T_ONS_READ_STATE ONSReadStatus; /*==== FUNCTIONS ==================================================*/ EXTERN BOOL cmhSIM_plmn_is_hplmn(); /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PercentBAND | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %BAND? AT command which returns the current multiband configuration. <bandMode>: band switch mode. <bandType>: band selection. */ GLOBAL T_ACI_RETURN qAT_PercentBAND(T_ACI_CMD_SRC srcId, T_ACI_BAND_MODE *bandMode, UBYTE *bandType) { UBYTE freq_bands, dummy; TRACE_FUNCTION ("qAT_PercentBAND()"); /* check command source */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } if( bandMode EQ NULL OR bandType EQ NULL ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } cmhMM_getBandSettings( &freq_bands, &dummy ); if( freq_bands EQ 0x00 ) { *bandType = 0x00; /* not really meanful here... */ *bandMode = BAND_MODE_Auto; } else { *bandType = freq_bands; *bandMode = BAND_MODE_Manual; } return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PlusCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COPS? AT command which returns the current setting of mode, format and operator. <mode>: registration mode. <format>: format of operator <oper>: operator string */ GLOBAL T_ACI_RETURN qAT_PlusCOPS ( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD * mode, T_ACI_COPS_FRMT * format, CHAR * oper ) { T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */ TRACE_FUNCTION ("qAT_PlusCOPS()"); /* check command source */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm; /* fill in parameters */ switch(mmShrdPrm.COPSmode) { case(COPS_MOD_Auto): case(COPS_MOD_Man): case(COPS_MOD_Dereg): *mode = mmShrdPrm.COPSmode; break; /*case(COPS_MOD_SetOnly): mmShrdPrm.COPSmode can't have been set with this value...*/ case(COPS_MOD_Both): if(mmShrdPrm.regModeAutoBack) { *mode = COPS_MOD_Man; } else *mode = COPS_MOD_Auto; break; default: *mode = mmShrdPrm.regMode; break; } *format = pMMCmdPrm -> COPSfrmt; *oper = 0x0; cmhMM_OperatorQuery(srcId,pMMCmdPrm -> COPSfrmt,oper); TRACE_EVENT(oper); return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PercentCOPS | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COPS? AT command which returns the current setting of mode, format and operator. <mode>: registration mode. <format>: format of operator <oper>: operator string */ GLOBAL T_ACI_RETURN qAT_PercentCOPS ( T_ACI_CMD_SRC srcId, T_ACI_COPS_MOD * mode, T_ACI_COPS_FRMT * format, T_ACI_COPS_SVST * svrStatus, CHAR * oper ) { T_MM_CMD_PRM * pMMCmdPrm; /* points to MM command parameters */ TRACE_FUNCTION ("qAT_PercentCOPS()"); /* check command source */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pMMCmdPrm = &cmhPrm[srcId].mmCmdPrm; /* fill in parameters */ switch(mmShrdPrm.COPSmode) { case(COPS_MOD_Auto): case(COPS_MOD_Man): case(COPS_MOD_Dereg): *mode = mmShrdPrm.COPSmode; break; /*case(COPS_MOD_SetOnly): mmShrdPrm.COPSmode can't have been set with this value...*/ case(COPS_MOD_Both): if(mmShrdPrm.regModeAutoBack) { *mode = COPS_MOD_Man; } else *mode = COPS_MOD_Auto; break; default: *mode = mmShrdPrm.regMode; break; } *format = pMMCmdPrm -> COPSfrmt; switch( mmShrdPrm.regStat ) { case( NO_VLD_RS ): case( RS_NO_SRV ): *svrStatus = COPS_SVST_NoSrv; break; case( RS_LMTD_SRV ): *svrStatus =COPS_SVST_Limited; break; case( RS_FULL_SRV ): *svrStatus = COPS_SVST_Full; break; default: *svrStatus = COPS_SVST_NotPresent; break; } *oper = 0x0; cmhMM_OperatorQuery(srcId,pMMCmdPrm -> COPSfrmt,oper); return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PlusCREG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CREG? AT command which returns the current setting of registration status. <stat>: registration status. <lac>: current lac. <cid>: current cell id. */ GLOBAL T_ACI_RETURN qAT_PlusCREG ( T_ACI_CMD_SRC srcId, T_ACI_CREG_STAT *stat, USHORT *lac, USHORT *cid ) { TRACE_FUNCTION ("qAT_PlusCREG()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *stat = mmShrdPrm.creg_status; *lac = mmShrdPrm.lac; *cid = mmShrdPrm.cid; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PercentCREG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CREG? AT command which returns the current setting of registration status. <stat>: registration status. <lac>: current lac. <cid>: current cell id. <gprs_ind>: if GPRS is available or not */ GLOBAL T_ACI_RETURN qAT_PercentCREG ( T_ACI_CMD_SRC srcId, T_ACI_CREG_STAT *stat, USHORT *lac, USHORT *cid, T_ACI_P_CREG_GPRS_IND *gprs_ind ) { TRACE_FUNCTION ("qAT_PercentCREG()"); qAT_PlusCREG (srcId, stat, lac, cid); #if defined (GPRS) AND defined (DTI) *gprs_ind = gmmShrdPrm.gprs_indicator; #else *gprs_ind = P_CREG_GPRS_Not_Supported; /* ACI-SPR-17218: use ACI type */ #endif /* GPRS */ return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PlusWS46 | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +WS46? AT command which returns the current setting wireless network selection. <mode>: network mode. */ GLOBAL T_ACI_RETURN qAT_PlusWS46 (T_ACI_CMD_SRC srcId, T_ACI_WS46_MOD * mode ) { TRACE_FUNCTION ("qAT_PlusWS46()"); /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ *mode = WS46_MOD_Gsm; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PlusCOPN | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +COPN AT command which returns the current operator names stored in ME. <lstId>: list identifier. <startIdx>: start index to read from. <lastIdx>: buffer for index of last copied name. <oprLstBuf>: buffer for operator names. length of MAX_OPER. */ GLOBAL T_ACI_RETURN qAT_PlusCOPN ( T_ACI_CMD_SRC srcId, T_ACI_COPN_LID lstId, SHORT startIdx, SHORT *lastIdx, T_ACI_COPN_OPDESC *oprLstBuf) { USHORT idx; /* holds list idx */ EF_PLMN plmnBuf; /* buffer PCM entry */ USHORT maxRec; /* holds maximum records */ USHORT recNr; /* holds record number */ USHORT oprLstLen; /* holds fixed oper list length */ UBYTE retVal; /* holds return value */ UBYTE ver; /* holds version */ UBYTE len; /* holds operator name length */ TRACE_FUNCTION ("qAT_PlusCOPN()"); /* *------------------------------------------------------------------- * determine list identifier *------------------------------------------------------------------- */ switch( lstId ) { /* *----------------------------------------------------------------- * for the list in permanent configuration memory *----------------------------------------------------------------- */ case( COPN_LID_Pcm ): recNr = startIdx+1; idx = 0; do { retVal= pcm_ReadRecord( (UBYTE *) EF_PLMN_ID, recNr, SIZE_EF_PLMN, (UBYTE *) &plmnBuf, &ver, &maxRec ); if( retVal EQ PCM_INVALID_SIZE OR retVal EQ PCM_INVALID_RECORD ) { if( idx EQ 0 ) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx ); return( AT_FAIL ); } break; } if( plmnBuf.mcc[0] NEQ 0xFF AND plmnBuf.mnc[0] NEQ 0xFF AND plmnBuf.lngNam[0] NEQ 0xFF ) { sprintf(oprLstBuf[idx].numOper, "%03X%02X", ((plmnBuf.mcc[0]<<8) + plmnBuf.mcc[1]), ((plmnBuf.mnc[0]<<8) + plmnBuf.mnc[1])); for( len = 0; len < SIZE_EF_PLMN_LONG AND plmnBuf.lngNam[len] NEQ 0xFF; len++ ) ; utl_cvtGsmIra( plmnBuf.lngNam, len, (UBYTE*)oprLstBuf[idx].alphaOper, MAX_ALPHA_OPER_LEN, CSCS_DIR_GsmToIra ); oprLstBuf[idx].alphaOper[MINIMUM(len,MAX_ALPHA_OPER_LEN-1)] = 0x0; idx++; } recNr++; } while( idx < MAX_OPER ); break; /* *----------------------------------------------------------------- * for the list in constant memory *----------------------------------------------------------------- */ case( COPN_LID_Cnst ): oprLstLen = cmhMM_GetOperLstLen(); if( startIdx >= oprLstLen ) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_InvIdx ); return( AT_FAIL ); } for( idx = 0, recNr = startIdx; idx < MAX_OPER AND recNr < oprLstLen; idx++, recNr++ ) { if ((operListFixed[recNr].mnc & 0x00F) EQ 0xF) { /*lint -e{702} */ sprintf(oprLstBuf[idx].numOper, "%03X%02X", operListFixed[recNr].mcc, operListFixed[recNr].mnc >> 4); } else { sprintf(oprLstBuf[idx].numOper, "%03X%02X", operListFixed[recNr].mcc, operListFixed[recNr].mnc); } strncpy( oprLstBuf[idx].alphaOper, operListFixed[recNr].longName, MAX_ALPHA_OPER_LEN-1 ); oprLstBuf[idx].alphaOper[MAX_ALPHA_OPER_LEN-1] = 0x0; } break; /* *----------------------------------------------------------------- * unexpected list type *----------------------------------------------------------------- */ default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * terminate list and set last index *------------------------------------------------------------------- */ if( idx < MAX_OPER ) { oprLstBuf[idx].numOper[0] = 0x0; oprLstBuf[idx].alphaOper[0] = 0x0; } *lastIdx = ( recNr NEQ 0 )?recNr-1:0; return( AT_CMPL ); } /* +-------------------------------------------------------------------+ | NEW AT Command qAT_PercentCOPN | | | +-------------------------------------------------------------------+ */ /*The same function in EDGE should be remved from ACIA when EDGE is merged to the UMTS*/ GLOBAL T_ACI_RETURN qAT_PercentCOPN( T_ACI_CMD_SRC srcId, T_ACI_COPS_FRMT format, CHAR *opr, T_ACI_OPER_NTRY *oper_ntry) { T_ACI_RETURN retval = AT_FAIL; T_OPER_ENTRY plmnDesc; BOOL found; if(format EQ COPS_FRMT_Numeric) { found = cmhMM_FindNumeric(&plmnDesc, opr); } else { found = cmhMM_FindName(&plmnDesc, opr, format); } if (found) { oper_ntry->mcc = plmnDesc.mcc; oper_ntry->mnc = plmnDesc.mnc; strncpy (oper_ntry->longName, plmnDesc.longName, sizeof(oper_ntry->longName)); oper_ntry->longName[sizeof(oper_ntry->longName) - 1] = '\0'; strncpy ((CHAR *)oper_ntry->shrtName, plmnDesc.shrtName, sizeof(oper_ntry->shrtName)); oper_ntry->shrtName[sizeof(oper_ntry->shrtName) - 1] = '\0'; oper_ntry->long_len = plmnDesc.long_len; oper_ntry->shrt_len = plmnDesc.shrt_len; if (plmnDesc.pnn) { oper_ntry->source = Read_EONS; } else if ((ONSReadStatus EQ ONS_READ_OVER) AND (cmhSIM_plmn_is_hplmn (plmnDesc.mcc, plmnDesc.mnc)) AND format EQ COPS_FRMT_Numeric) { oper_ntry->source = Read_CPHS; } else { oper_ntry->source = Read_ROM_TABLE; } } else { oper_ntry->longName[0] = '\0'; oper_ntry->shrtName[0] = '\0'; oper_ntry->mcc = 0; oper_ntry->mnc = 0; oper_ntry->source = Read_INVALID; } return AT_CMPL; } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMQ | | STATE : code ROUTINE : qAT_PercentNRG | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %NRG? AT command which returns the current setting of registration mode and service mode and the current status of service. <regMode>: registration mode. <srvMode>: service mode. <oprFrmt>: operator format. <srvStat>: service status. <oper> : operator */ GLOBAL T_ACI_RETURN qAT_PercentNRG( T_ACI_CMD_SRC srcId, T_ACI_NRG_RGMD *regMode, T_ACI_NRG_SVMD *srvMode, T_ACI_NRG_FRMT *oprFrmt, T_ACI_NRG_SVMD *srvStat, CHAR *oper) { T_ACI_COPS_FRMT copsFormat; TRACE_FUNCTION ("qAT_PercentNRG()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } /* *------------------------------------------------------------------- * fill in parameters *------------------------------------------------------------------- */ switch( mmShrdPrm.regStat ) { case( NO_VLD_RS ): case( RS_NO_SRV ): *srvStat = NRG_SVMD_NoSrv; break; case( RS_LMTD_SRV ): *srvStat = NRG_SVMD_Limited; break; case( RS_FULL_SRV ): *srvStat = NRG_SVMD_Full; break; default: *srvStat = NRG_SVMD_NotPresent; break; } *srvMode = cmhPrm[srcId].mmCmdPrm.NRGsrvMode; *oprFrmt = cmhPrm[srcId].mmCmdPrm.NRGoprFrmt; *oper = 0x0; *regMode = cmhPrm[srcId].mmCmdPrm.NRGregMode; switch( *oprFrmt ) { case( NRG_FRMT_NotPresent ): copsFormat = COPS_FRMT_NotPresent; break; case( NRG_FRMT_Numeric ): copsFormat = COPS_FRMT_Numeric ; break; case( NRG_FRMT_Short): copsFormat = COPS_FRMT_Short ; break; case( NRG_FRMT_Long): copsFormat = COPS_FRMT_Long; break; default: ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } cmhMM_OperatorQuery(srcId,copsFormat,oper); return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PercentCSQ | +--------------------------------------------------------------------+ PURPOSE : This is the function for Signal Quality query Shen,Chao Juni.13th, 2003 */ GLOBAL T_ACI_RETURN qAT_PercentCSQ( T_ACI_CMD_SRC srcId, UBYTE *rssi, UBYTE *ber, UBYTE *actlevel) { rx_Status_Type rxStat; TRACE_FUNCTION("qAT_PercentCSQ()"); if ( rx_GetStatus ( &rxStat ) NEQ DRV_OK ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return ATI_FAIL; } else { if ( rxStat.gsmLevel EQ 0xFF OR rxStat.gsmLevel EQ 0 ) { *rssi = ACI_RSSI_FAULT; } else if ( rxStat.gsmLevel > 59 ) { *rssi = 31; } else { *rssi = ( rxStat.gsmLevel / 2 ) + 2; } if ( rxStat.rxQuality EQ RX_QUAL_UNAVAILABLE ) { *ber = ACI_BER_FAULT; } else { *ber = rxStat.rxQuality; } *actlevel = rxStat.actLevel; return ATI_CMPL; } } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PercentDBGINFO | +--------------------------------------------------------------------+ PURPOSE : query free mem pool blocks. */ GLOBAL T_ACI_RETURN qAT_PercentDBGINFO(T_ACI_CMD_SRC srcId, ULONG param, USHORT stor, USHORT *free, USHORT *alloc) { int ret=0; TRACE_FUNCTION ("qAT_PercentDBGINFO()"); /* *----------------------------------------------------------------- * check command source *----------------------------------------------------------------- */ if( ! cmh_IsVldCmdSrc (srcId) ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return (AT_FAIL); } ret = vsi_m_status (hCommACI, param, (USHORT)stor, free, alloc ); if (ret EQ VSI_ERROR OR *free EQ 0) { ACI_ERR_DESC( ACI_ERR_CLASS_Cme, CME_ERR_MemFull ); return (ATI_FAIL); } return (ATI_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PlusCTZR | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CTZR AT command which will query the status of CTZRmode, indicating whether time zone change rep[orting is enabled or disabled. <on/off>: Indicates whether time zone reporting is enabled or disabled. */ GLOBAL T_ACI_RETURN qAT_PlusCTZR ( T_ACI_CMD_SRC srcId, T_ACI_CTZR_MODE *mode) { TRACE_FUNCTION ("qAT_PlusCTZR()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("qAT_PlusCTZR(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } *mode = cmhPrm[srcId].mmCmdPrm.CTZRMode; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PlusCTZU | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the +CTZU AT command which will query the status of CTZUmode, indicating whether time zone automatic update is enabled or disabled. <on/off>: Indicates whether time zone automatic update is enabled or disabled. */ GLOBAL T_ACI_RETURN qAT_PlusCTZU ( T_ACI_CMD_SRC srcId, T_ACI_CTZU_MODE *mode) { TRACE_FUNCTION ("qAT_PlusCTZU()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("qAT_PlusCTZU(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } *mode = cmhPrm[srcId].mmCmdPrm.CTZUMode; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PlusCCLK | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the sAT_PlusCCLK command which will query the status of the RTC in the MT, indicating what the time is in the MT. */ GLOBAL T_ACI_RETURN qAT_PlusCCLK ( T_ACI_CMD_SRC srcId, T_ACI_RTC_DATE *date_s, T_ACI_RTC_TIME *time_s, int * timeZone ) { UBYTE ret; TRACE_FUNCTION ("qAT_PlusCCLK()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("qAT_PlusCCLK(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } TRACE_EVENT("qAT_PlusCCLK(): get time and date " ); #ifndef _SIMULATION_ ret = rtc_get_time_date((T_RTC_DATE *) date_s, (T_RTC_TIME *) time_s); switch (ret) { case 0: /* RVF_OK */ #ifdef FF_TIMEZONE *timeZone = RTC_GetCurrentTZ(); /* Get current timezone now time and date are obtained.*/ TRACE_EVENT_P1("qAT_PlusCCLK(): timezone obatained: %d", *timeZone); #endif /* FF_TIMEZONE */ return( AT_CMPL ); default: TRACE_EVENT_P1("qAT_PlusCCLK(): ERROR: %d", ret); /* RVF_NOT_READY or RVF_INTERNAL ERROR */ return( AT_FAIL ); } #else /* _SIMULATION_ */ /* Set return info for date time to: "04/08/17,13:31:04-10" */ date_s->year = 2004; date_s->month = 8; date_s->day = 17; time_s->hour = 13; time_s->minute = 31; time_s->second = 4; time_s->format = 0; /* RTC_TIME_FORMAT_24HOUR = 0 */ time_s->PM_flag = 0; *timeZone = -10; /* Set timezone to -10 */ return( AT_CMPL ); #endif /* _SIMULATION_ */ } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PercentCTZV | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CTZV AT command which will query the status of PCTZVmode, indicating whether time and date report is enabled or disabled. <on/off>: Indicates whether time and date report is enabled or disabled. */ GLOBAL T_ACI_RETURN qAT_PercentCTZV ( T_ACI_CMD_SRC srcId, T_ACI_PCTZV_MODE *mode) { TRACE_FUNCTION ("qAT_PercentCTZV()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("qAT_PercentCTZV(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } *mode = cmhPrm[srcId].mmCmdPrm.PCTZVMode; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PercentCNIV | +--------------------------------------------------------------------+ PURPOSE : This is the functional counterpart to the %CNIV AT command which will query the status of CNIVmode, indicating whether time and date report is enabled or disabled. <on/off>: Indicates whether time and date report is enabled or disabled. */ GLOBAL T_ACI_RETURN qAT_PercentCNIV ( T_ACI_CMD_SRC srcId, T_ACI_CNIV_MODE *mode) { TRACE_FUNCTION ("qAT_PercentCNIV()"); /* *------------------------------------------------------------------- * check command source *------------------------------------------------------------------- */ if(!cmh_IsVldCmdSrc (srcId)) { TRACE_EVENT_P1("qAT_PercentCNIV(): Invalid source: %d", srcId); ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } *mode = cmhPrm[srcId].mmCmdPrm.CNIVMode; return( AT_CMPL ); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PlusCIND | +--------------------------------------------------------------------+ PURPOSE : This is the function for Signal Quality query */ GLOBAL T_ACI_RETURN qAT_PlusCIND ( T_ACI_CMD_SRC srcId, T_ACI_CIND_SIGNAL_TYPE *sCindSgnalSettings, T_ACI_CIND_SMSFULL_TYPE *sCindSmsFullSettings ) { T_ACI_MM_CIND_VAL_TYPE *pMMCmdPrm; TRACE_FUNCTION ("qAT_PlusCIND()"); if( !cmh_IsVldCmdSrc( srcId ) || (sCindSgnalSettings == NULL) || (sCindSmsFullSettings == NULL) ) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCINDSettings); *sCindSgnalSettings = pMMCmdPrm->sCindSignalParam; *sCindSmsFullSettings = pMMCmdPrm->sCindSmsFullParam; return(AT_CMPL); } /* +--------------------------------------------------------------------+ | PROJECT : ACI/MMI MODULE : CMH_MMS | | STATE : code ROUTINE : qAT_PlusCMER | +--------------------------------------------------------------------+ PURPOSE : This is the function for Signal Quality query */ GLOBAL T_ACI_RETURN qAT_PlusCMER ( T_ACI_CMD_SRC srcId, T_ACI_CMER_MODE_TYPE *sCmerModeSettings, T_ACI_CMER_IND_TYPE *sCmerIndicationSettings, T_ACI_CMER_BFR_TYPE *sCmerBfrSettings ) { T_ACI_MM_CMER_VAL_TYPE *pMMCmdPrm; TRACE_FUNCTION ("qAT_PlusCMER()"); if( !cmh_IsVldCmdSrc( srcId ) || (sCmerModeSettings == NULL) || (sCmerIndicationSettings == NULL) || (sCmerBfrSettings == NULL)) { ACI_ERR_DESC( ACI_ERR_CLASS_Ext, EXT_ERR_Parameter ); return( AT_FAIL ); } pMMCmdPrm = &(cmhPrm[srcId].mmCmdPrm.sIndicationParam.sMmCMERSettings); *sCmerModeSettings = pMMCmdPrm->sCmerModeParam; *sCmerIndicationSettings = pMMCmdPrm->sCmerIndParam; *sCmerBfrSettings = pMMCmdPrm->sCmerBfrParam; return(AT_CMPL); } /*==== EOF ========================================================*/