niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.

/*
 * This version of fflags.h (ccdgen config file) is a FreeCalypso concoction.
 * Here I set all feature flags to OFF in order to create a configuration
 * that mimics the TCS211 program.
 */

#undef  FF_PS_RSSI
#undef  SIM_PERS
#undef  FF_PHONE_LOCK
#undef  TI_PS_FF_AT_CMD_P_ECC
#undef  TI_PS_FF_REL99_AND_ABOVE
#undef  TI_DUAL_MODE
#undef  REL99
#undef  FF_BHO
#undef  TI_PS_FF_EMR
#undef  TI_PS_FF_RTD
#undef  FF_EGPRS
#undef  REL4
#undef  TI_PS_FF_TBF_EST_PACCH
#undef  TI_PS_FF_QUAD_BAND_SUPPORT