FreeCalypso > hg > fc-magnetite

view cdg-hybrid/sap/udpa.pdf @ 635:baa0a02bc676

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : udpa.pdf
;*** Creation       : Wed Mar 11 09:58:55 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : udpa
;*** Document No.   : 8444.103.02.006
;*** Document Date  : 2003-08-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: Jacek
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:56:38 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-26"
PRAGMA 	ID_AND_VERSION 	"8444.103.02.006"



CONST 	UDPA_ENTITY_NAME_LEN 	6 	; maximum length of entity name including NULL



VALTAB 	VAL_dti_conn
VAL 	0 	UDPA_CONNECT_DTI 	"Connect DTI2 to UDP"
VAL 	1 	UDPA_DISCONNECT_DTI 	"Disconnect DTI2 from UDP"

VALTAB 	VAL_link_id
VAL 	0 	UDPA_LINK_ID_DEFAULT 	"Default link id"

VALTAB 	VAL_dti_direction
VAL 	0 	UDPA_DTI_TO_HIGHER_LAYER 	"DTI2 used normally"
VAL 	1 	UDPA_DTI_TO_LOWER_LAYER 	"DTI2 is inverted"

VALTAB 	VAL_cmd
VAL 	0 	UDPA_CONFIG_UP 	"enable the interface"
VAL 	1 	UDPA_CONFIG_DOWN 	"disable the interface"




VAR 	dti_conn 	"DTI2 connect" 	B

VAL 	@p_udpa - VAL_dti_conn@ 	

VAR 	link_id 	"Link identifier" 	L

VAL 	@p_udpa - VAL_link_id@ 	

VAR 	dti_direction 	"DTI2 direction" 	B

VAL 	@p_udpa - VAL_dti_direction@ 	

VAR 	entity_name 	"name of an neighbour entity" 	B


VAR 	cmd 	"command" 	B

VAL 	@p_udpa - VAL_cmd@ 	







; UDPA_DTI_REQ 	0x8000003B
; UDPA_DTI_CNF 	0x8000403B
; UDPA_DTI_IND 	0x8001403B
; UDPA_CONFIG_REQ 	0x8001003B
; UDPA_CONFIG_CNF 	0x8002403B



PRIM 	UDPA_DTI_REQ 	0x8000003B
{
 	dti_conn 	 ; DTI connect
 	entity_name 	[UDPA_ENTITY_NAME_LEN] 	 ; Entity name
 	link_id 	 ; Link identifier
 	dti_direction 	 ; DTI direction
}






PRIM 	UDPA_DTI_CNF 	0x8000403B
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; Link identifier
}






PRIM 	UDPA_DTI_IND 	0x8001403B
{
 	link_id 	 ; link identifier
}






PRIM 	UDPA_CONFIG_REQ 	0x8001003B
{
 	cmd 	 ; Command
}






PRIM 	UDPA_CONFIG_CNF 	0x8002403B
{
}