FreeCalypso > hg > fc-magnetite
view cdg211/cdginc/p_rrlc.val @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 01:41:35 +0000 |
parents | 56abf6cf8a0b |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_rrlc.val | | SOURCE : "__out__\g23m_dfile\prim\rrlc.pdf" | | LastModified : "2002-10-11" | | IdAndVersion : "8443.101.02.008" | | SrcFileTime : "Mon Nov 24 15:49:52 2003" | | Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:16 2007 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_RRLC_VAL #define P_RRLC_VAL #define CDG_ENTER__P_RRLC_VAL #define CDG_ENTER__FILENAME _P_RRLC_VAL #define CDG_ENTER__P_RRLC_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_RRLC_VAL__LAST_MODIFIED _2002_10_11 #define CDG_ENTER__P_RRLC_VAL__ID_AND_VERSION _8443_101_02_008 #define CDG_ENTER__P_RRLC_VAL__SRC_FILE_TIME _Mon_Nov_24_15_49_52_2003 #include "CDG_ENTER.h" #undef CDG_ENTER__P_RRLC_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_cause */ #define LCS_OK (0x0) /* no error */ #define LCS_WRONG_BTS (0xa) /* Serving Cell BTS differs from Reference BTS */ #define LCS_HANDOVER (0x14) /* handover occured during Position Measurement procedure */ /* * Value constants for VAL_sb_flag */ #define EOTD_INVALID (0x0) /* invalid data */ #define EOTD_VALID (0x1) /* valid data */ /* * Value constants for VAL_eotd_mode */ #define EOTD_IDLE (0x0) /* Idle mode */ #define EOTD_DEDIC (0x1) /* Dedicated or packet mode */ /* * Value constants for VAL_exp_otd */ /* * Value constants for VAL_fn */ #define FNMAX (0x297000) /* max Frame Number + 1 (26*51*2048) */ /* * Value constants for VAL_mfrm_offset */ /* * Value constants for VAL_otd_type */ #define ROUGH_RTD (0x0) /* only rough RTD has been provided by the NW */ #define EXPECTED_OTD (0x1) /* only expectedOTD has been provided by the NW */ #define BOTH_OTD (0x2) /* Both OTD / RTD types have been provided by the NW */ /* * Value constants for VAL_rough_rtd */ /* * Value constants for VAL_tav */ #define TA_NOT_AVAIL (0xff) /* no Timing Advance in Idle Mode */ /* * Value constants for VAL_uncertainty */ #define UNC_MAX_2BIT (0x0) /* uncertainty in bits. 0 - 2 bits */ #define UNC_MAX_4BIT (0x1) /* uncertainty in bits. 3 - 4 bits */ #define UNC_MAX_8BIT (0x2) /* uncertainty in bits. 5 - 8 bits */ #define UNC_MAX_12BIT (0x3) /* uncertainty in bits. 9 - 12 bits */ #define UNC_MAX_16BIT (0x4) /* uncertainty in bits. 13 - 16 bits */ #define UNC_MAX_22BIT (0x5) /* uncertainty in bits. 17 - 22 bits */ #define UNC_MAX_30BIT (0x6) /* uncertainty in bits. 23 - 30 bits */ #define UNC_GT_30BIT (0x7) /* uncertainty in bits. > 30 bits */ /* * user defined constants */ #define MAX_NCELL_EOTD_L1 (0xc) #define MAX_NCELL_EOTD (0xf) #define MAX_NCELL_EOTD_SI (0x20) #define XCOR_NO (0x12) #include "CDG_LEAVE.h" #endif