FreeCalypso > hg > fc-magnetite

view cdg3/cdginc-conservative/p_gsmcom.h @ 635:baa0a02bc676

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_gsmcom.h                                                     |
| SOURCE  : "sap\gsmcom.pdf"                                               |
| LastModified : "2002-10-04"                                              |
| IdAndVersion : "8443.100.02.008"                                         |
| SrcFileTime  : "Thu Nov 29 09:43:26 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_GSMCOM_H
#define P_GSMCOM_H


#define CDG_ENTER__P_GSMCOM_H

#define CDG_ENTER__FILENAME _P_GSMCOM_H
#define CDG_ENTER__P_GSMCOM_H__FILE_TYPE CDGINC
#define CDG_ENTER__P_GSMCOM_H__LAST_MODIFIED _2002_10_04
#define CDG_ENTER__P_GSMCOM_H__ID_AND_VERSION _8443_100_02_008

#define CDG_ENTER__P_GSMCOM_H__SRC_FILE_TIME _Thu_Nov_29_09_43_26_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_GSMCOM_H

#undef CDG_ENTER__FILENAME


#include "p_gsmcom.val"


/*
 * End of substructure section, begin of primitive definition section
 */

#ifndef __T_GSMCOM_DUMMY_REQ__
#define __T_GSMCOM_DUMMY_REQ__
/*
 * 
 * CCDGEN:WriteStruct_Count==1700
 */
typedef struct
{
  U8                        gsmcom_dummy;             /*<  0:  1> dummy, not used                                    */
  U8                        _align0;                  /*<  1:  1> alignment                                          */
  U8                        _align1;                  /*<  2:  1> alignment                                          */
  U8                        _align2;                  /*<  3:  1> alignment                                          */
} T_GSMCOM_DUMMY_REQ;
#endif


#include "CDG_LEAVE.h"


#endif