view cdg3/cdginc-conservative/p_psi.val @ 635:baa0a02bc676

niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents c15047b3d00d
children
line wrap: on
line source

/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK                                                 |
| FILE    : p_psi.val                                                      |
| SOURCE  : "sap\psi.pdf"                                                  |
| LastModified : "2004-02-09"                                              |
| IdAndVersion : "..01.001"                                                |
| SrcFileTime  : "Thu Nov 29 09:51:16 2007"                                |
| Generated by CCDGEN_2.5.5A on Thu Sep 25 09:52:55 2014                   |
|           !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!!                |
+--------------------------------------------------------------------------+
*/

/* PRAGMAS
 * PREFIX                 : NONE
 * COMPATIBILITY_DEFINES  : NO (require PREFIX)
 * ALWAYS_ENUM_IN_VAL_FILE: NO
 * ENABLE_GROUP: NO
 * CAPITALIZE_TYPENAME: NO
 */


#ifndef P_PSI_VAL
#define P_PSI_VAL


#define CDG_ENTER__P_PSI_VAL

#define CDG_ENTER__FILENAME _P_PSI_VAL
#define CDG_ENTER__P_PSI_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_PSI_VAL__LAST_MODIFIED _2004_02_09
#define CDG_ENTER__P_PSI_VAL__ID_AND_VERSION __01_001

#define CDG_ENTER__P_PSI_VAL__SRC_FILE_TIME _Thu_Nov_29_09_51_16_2007

#include "CDG_ENTER.h"

#undef CDG_ENTER__P_PSI_VAL

#undef CDG_ENTER__FILENAME

#include "p_dio.val"   /* Access values independent from the corresponding h-file. */


/*
 * Value constants for VAL_cause
 */
#define PSICS_SUCCESS                  (0xd300)   /* 0b11010011 00000000 no error   */
#define PSICS_INVALID_PARAMS           (0xd301)   /* 0b11010011 00000001 device number invalid or parameter invalid  */
#define PSICS_INTERNAL_DRV_ERROR       (0xd302)   /* 0b11010011 00000010 A driver function returned DRV_INTERNAL_ERROR */
#define PSICS_DISCONNECT               (0xd303)   /* 0b11010011 00000011 The driver signalled a DRV_SIGTYPE_DISCONNECT */

/*
 * Value constants for VAL_psi_line_states
 */
#define PSI_LINE_STD_NOT_VALID         (0x0)      /* b00000000 no line state request is given */

/*
 * Value constants for VAL_psi_baud_rate
 */
#define DIO4_BAUD_NOT_VALID            (0xffffffff)/* baudrate is not changed        */

/*
 * Value constants for VAL_psi_char_frame
 */
#define DIO_CF_NOT_VALID               (0x0)      /* char frame values are not changed */

/*
 * Value constants for VAL_psi_flow_control
 */
#define DIO_FLOW_NOT_VALID             (0xffffffff)/* flow control value are not changed */

/*
 * Value constants for VAL_psi_mux_mode
 */
#define DIO_MUX_MODE_NOT_VALID         (0xffffffff)/* mux mode is unchanged          */

/*
 * Value constants for VAL_pkt_flag
 */
#define DIO_FLAG_PKT_PROTOCOL          (0x80000000)/* device can transfer information to identify the packet protocol */
#define DIO_FLAG_PKT_PROT_NOT_VALID    (0xffffffff)/* packet flag is not changed     */

/*
 * Value constants for VAL_psi_sleep_mode
 */
#define DIO_SLEEP_NOT_VALID            (0x0)      /* value is not valid             */
#define DIO_SLEEP_NOT_CHAN             (0xff)     /* value is not changed           */

/*
 * Value constants for VAL_psi_guard_per
 */
#define DIO_GUARD_PER_NOT_VALID        (0xff)     /* guard period is not changed    */

/*
 * Value constants for VAL_psi_dev_mode
 */
#define DEV_MODE_NOT_VALID             (0x0)      /* device mode is unchanged       */

/*
 * Value constants for VAL_psi_esc_char
 */
#define ESC_CHAR_NOT_VALID             (0x0)      /* escape character is not changed */

/*
 * Value constants for VAL_pkt_type
 */
#define DIO_PACKET_IPV4                (0x21)     /* IP packet version 4            */
#define DIO_PACKET_VJ_CTCP             (0x2d)     /* IPv4 packet with Van Jacobson compressed TCP/IP header */
#define DIO_PACKET_VJ_UTCP             (0x2f)     /* IPv4 packet with Van Jacobson uncompressed TCP/IP header */
#define DIO_PACKET_IPV6                (0x57)     /* IP packet version 6            */

/*
 * Value constants for VAL_psi_xon
 */
#define XON_NOT_VALID                  (0x0)      /* xon value is unchanged         */

/*
 * Value constants for VAL_psi_xoff
 */
#define XOFF_NOT_VALID                 (0x0)      /* xoff value is unchanged        */

/*
 * Value constants for VAL_psi_n1
 */
#define PSI_MUX_N1_NOT_VALID           (0x0)      /* mux max frame size is not changed */

/*
 * Value constants for VAL_psi_n2
 */
#define PSI_MUX_N2_NOT_VALID           (0x0)      /* number of retransmission is not changed */

/*
 * Value constants for VAL_psi_t1
 */
#define PSI_MUX_T1_NOT_VALID           (0x0)      /* acknowledgement timer is not changed */

/*
 * Value constants for VAL_psi_t2
 */
#define PSI_MUX_T2_NOT_VALID           (0x0)      /* response timer is not changed  */

/*
 * Value constants for VAL_psi_t3
 */
#define PSI_MUX_T3_NOT_VALID           (0x0)      /* wake up response timer is not changed */

/*
 * Value constants for VAL_psi_k
 */
#define PSI_K_NOT_VALID                (0x0)      /* windows size  is not changed   */

/*
 * Value constants for VAL_psi_data_mode
 */
#define DRIVER_MODE_AT                 (0x1)      /* The driver will transmit AT commands. */
#define DRIVER_MODE_DATA               (0x2)      /* The driver  will transmit data. */
#define DRIVER_MODE_AT_DATA            (0x3)      /* The driver will transmit AT commands and data */

/* 
 * enum to UnionController DIO_CAP_UN 
 * CCDGEN:WriteEnum_Count==169
 */
#ifndef __T_ctrl_DIO_CAP_UN__
#define __T_ctrl_DIO_CAP_UN__
typedef enum
{
  ser_cap                        = 0x0,           
  pkt_cap                        = 0x1,           
  mux_cap                        = 0x2            
}T_ctrl_DIO_CAP_UN;
#endif

/* 
 * enum to UnionController DIO_DCB_UN 
 * CCDGEN:WriteEnum_Count==170
 */
#ifndef __T_ctrl_DIO_DCB_UN__
#define __T_ctrl_DIO_DCB_UN__
typedef enum
{
  ser_dcb                        = 0x0,           
  pkt_dcb                        = 0x1,           
  mux_dcb                        = 0x2            
}T_ctrl_DIO_DCB_UN;
#endif

/*
 * user defined constants
 */
#define PSI_PEER_ENTITY_NAME_LENGTH    (0x6)      

#include "CDG_LEAVE.h"


#endif