FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_ppp.val @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 01:41:35 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_ppp.val | | SOURCE : "sap\ppp.pdf" | | LastModified : "2002-10-21" | | IdAndVersion : "8441.116.99.016" | | SrcFileTime : "Thu Nov 29 09:51:00 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_PPP_VAL #define P_PPP_VAL #define CDG_ENTER__P_PPP_VAL #define CDG_ENTER__FILENAME _P_PPP_VAL #define CDG_ENTER__P_PPP_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_PPP_VAL__LAST_MODIFIED _2002_10_21 #define CDG_ENTER__P_PPP_VAL__ID_AND_VERSION _8441_116_99_016 #define CDG_ENTER__P_PPP_VAL__SRC_FILE_TIME _Thu_Nov_29_09_51_00_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_PPP_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_mru */ #define PPP_MRU_DEFAULT (0x5dc) /* default value for mru */ /* * Value constants for VAL_ap */ #define PPP_AP_NO (0x0) /* no authentication */ #define PPP_AP_PAP (0x1) /* password authentication protocol */ #define PPP_AP_CHAP (0x2) /* challenge handshake authentication protocol */ #define PPP_AP_AUTO (0x3) /* automatic authentication */ /* * Value constants for VAL_accm */ #define PPP_ACCM_DEFAULT (0xffffffff)/* default value for accm */ #define PPP_ACCM_OFF (0x0) /* disable control character mapping */ /* * Value constants for VAL_rt */ #define PPP_RT_DEFAULT (0x3) /* default value for restart timer */ /* * Value constants for VAL_mc */ #define PPP_MC_DEFAULT (0xa) /* default value for max configure */ /* * Value constants for VAL_mt */ #define PPP_MT_DEFAULT (0x2) /* default value for max terminate */ /* * Value constants for VAL_mf */ #define PPP_MF_DEFAULT (0x5) /* default value for max failure */ /* * Value constants for VAL_ppp_cause */ #define PPP_TERM_OK_MMI (0xcf01) /* successful terminated (MMI initiated) */ #define PPP_TERM_OK_PEER (0xcf02) /* successful terminated (PPP peer initiated) */ #define PPP_TERM_NO_RESPONSE (0xcf03) /* no response from the PPP peer */ #define PPP_TERM_LOOP_BACK (0xcf04) /* looped-back link detected */ #define PPP_TERM_LCP_NOT_CONVERGE (0xcf05) /* LCP configuration is not converging */ #define PPP_TERM_IPCP_NOT_CONVERGE (0xcf06) /* IPCP configuration is not converging */ #define PPP_TERM_IPCP_NOT_STARTED (0xcf07) /* PPP peer did not start IPCP configuration */ #define PPP_TERM_NO_CHANNEL (0xcf08) /* can not open communication channels */ #define PPP_TERM_PROT_REJ_UNEXPECTED (0xcf09) /* unexpected Protocol Rejection from PPP peer */ #define PPP_TERM_USE_AUTHED_FAILED (0xcf0a) /* user authentication failed */ #define PPP_TERM_PROT_ERROR_UNSPEC (0xcf0b) /* unspecified protocol error */ /* * Value constants for VAL_ppp_hc */ #define PPP_HC_OFF (0x0) /* no header compression */ #define PPP_HC_VJ (0x1) /* Van Jacobson header compression */ /* * Value constants for VAL_ip */ #define PPP_IP_DYNAMIC (0x0) /* dynaminc IP address negotiation */ /* * Value constants for VAL_dns1 */ #define PPP_DNS1_DYNAMIC (0x0) /* dynaminc primary DNS server address negotiation */ /* * Value constants for VAL_dns2 */ #define PPP_DNS2_DYNAMIC (0x0) /* dynaminc secondary DNS server address negotiation */ /* * Value constants for VAL_mode */ #define PPP_CLIENT (0x0) /* start PPP as client */ #define PPP_SERVER (0x1) /* start PPP as server */ #define PPP_TRANSPARENT (0x2) /* start PPP in transparent mode */ /* * Value constants for VAL_lower_layer */ #define PPP_LOWER_LAYER_DOWN (0x0) /* lower layer is not available */ #define PPP_LOWER_LAYER_UP (0x1) /* lower layer is available */ /* * Value constants for VAL_connected_direction */ #define PPP_DTI_CONN_PEER (0x0) /* DTI channel is connected to Peer Layer */ #define PPP_DTI_CONN_PROT (0x1) /* DTI channel is connected to Protocol Layer */ /* * user defined constants */ #define PPP_LOGIN_NAME_LENGTH (0x21) #define PPP_PASSWORD_LENGTH (0x19) #define PPP_ORIGINATING_ENTITY (0xf) #include "CDG_LEAVE.h" #endif