FreeCalypso > hg > fc-magnetite

view cdg3/sap/ph.pdf @ 635:baa0a02bc676

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : ph.pdf
;*** Creation       : Wed Mar 11 09:58:34 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : ph
;*** Document No.   : 6147.112.01.100
;*** Document Date  : 2001-10-26
;*** Document Status: APPROVED
;*** Document Author: SBK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:50:28 2007"
PRAGMA 	LAST_MODIFIED 	"2001-10-26"
PRAGMA 	ID_AND_VERSION 	"6147.112.01.100"



CONST 	DUMMY_PH 	0 	; Dummy, not used, needed to satisfy tool chain which requires at least one constant definition in a SAP



VALTAB 	VAL_ch_type
VAL 	0 	CH_TYPE_SACCH 	"SACCH"
VAL 	1 	CH_TYPE_SDCCH 	"SDCCH"
VAL 	2 	CH_TYPE_FACCH 	"FACCH Full Rate"
VAL 	3 	 	"reserved"
VAL 	4 	 	"reserved"
VAL 	5 	 	"reserved"
VAL 	6 	 	"reserved"
VAL 	7 	CH_TYPE_FACCH_HR 	"FACCH Half Rate"




VAR 	l2_channel 	"Layer 2 channel-type" 	B

VAL 	@p_mphc - VAL_l2_channel@ 	

VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1;" 	B


VAR 	dummy 	"dummy not used" 	B





COMP 	sdu 	 "message unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1;
}






; PH_READY_TO_SEND 	0x4100
; PH_DATA_REQ 	0x0100
; PH_TRACE_IND 	0x4102



PRIM 	PH_READY_TO_SEND 	0x4100
{
 	l2_channel AS ch_type 	 ; channel type
}






PRIM 	PH_DATA_REQ 	0x0100
{
 	l2_channel AS ch_type 	 ; channel type
 	dummy 	 ; dummy not used; reserved
 	sdu 	 ; message unit
}






PRIM 	PH_TRACE_IND 	0x4102
{
 	dummy 	 ; dummy not used; not used
}