FreeCalypso > hg > fc-magnetite
view scripts/make-rv-swe-hdr.sh @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 01:41:35 +0000 |
parents | 23e9a9f18b97 |
children |
line wrap: on
line source
#!/bin/sh echo '#ifndef __RV_SWE_H__' echo '#define __RV_SWE_H__' echo if [ "$ATP_STATE" = 1 ] then echo '#define RVM_ATP_SWE' fi echo '#define RVM_AUDIO_SWE' echo '#define RVM_ETM_SWE' echo '#define RVM_DAR_SWE' echo '#define RVM_SPI_SWE' echo '#define RVM_LLS_SWE' echo '#define RVM_KPD_SWE' if [ "$FCHG_STATE" = 1 ] then echo '#define RVM_FCHG_SWE' fi if [ "$LCC_STATE" = 1 ] then echo '#define RVM_LCC_SWE' fi if [ "$PWR_STATE" = 1 ] then echo '#define RVM_PWR_SWE' fi if [ "$R2D_STATE" = 1 ] then echo '#define RVM_R2D_SWE' fi if [ "$MKS_STATE" = 1 ] then echo '#define RVM_MKS_SWE' fi echo '#define RVM_RTC_SWE' echo '#define RVM_FFS_SWE' echo echo '#endif /* __RV_SWE_H__ */'