niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.

#!/bin/sh

if [ -z "$BUILD_DIR" ]
then
	BUILD_DIR=build-sb
fi

if [ -z "$USE_STR2IND" ]
then
	USE_STR2IND=0
fi

if [ -z "$CHIPSET" ]
then
	CHIPSET=10
fi

if [ -z "$DSP" ]
then
	DSP=36
fi

if [ -z "$RF" ]
then
	RF=12
fi

if [ -z "$L1_DYN_DSP_DWNLD" ]
then
	L1_DYN_DSP_DWNLD=1
fi

if [ -z "$TCSENV" ]
then
	TCSENV=2
fi

case "$TCSENV" in
	2)
		CONDAT=condat2
		GPF=gpf2
		CDGINC=cdg211/cdginc
		CDGPRIM=cdg211/prim
		ACI=aci2
		;;
	3)
		CONDAT=condat3
		GPF=gpf3
		CDGINC=cdg-hybrid/cdginc
		CDGPRIM=cdg-hybrid/sap-inline
		ACI=g23m-aci
		;;
	*)
		echo "Error: bad TCSENV= setting" 1>&2
		exit 1
		;;
esac

if [ -z "$MMI" ]
then
	MMI=0
fi

GPRS=1
SRVC=1

export ACI BUILD_DIR CDGINC CDGPRIM CHIPSET CONDAT DSP GPF GPRS
export L1_DYN_DSP_DWNLD MMI RF SRVC USE_STR2IND

exec scripts/mk-component.sh "$@"