FreeCalypso > hg > fc-magnetite
view scripts/mkcomp-test.sh @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 01:41:35 +0000 |
parents | 5fbcfd465de0 |
children | 8cf3029429f3 |
line wrap: on
line source
#!/bin/sh if [ -z "$BUILD_DIR" ] then BUILD_DIR=build-sb fi if [ -z "$USE_STR2IND" ] then USE_STR2IND=0 fi if [ -z "$CHIPSET" ] then CHIPSET=10 fi if [ -z "$DSP" ] then DSP=36 fi if [ -z "$RF" ] then RF=12 fi if [ -z "$L1_DYN_DSP_DWNLD" ] then L1_DYN_DSP_DWNLD=1 fi if [ -z "$TCSENV" ] then TCSENV=2 fi case "$TCSENV" in 2) CONDAT=condat2 GPF=gpf2 CDGINC=cdg211/cdginc CDGPRIM=cdg211/prim ACI=aci2 ;; 3) CONDAT=condat3 GPF=gpf3 CDGINC=cdg-hybrid/cdginc CDGPRIM=cdg-hybrid/sap-inline ACI=g23m-aci ;; *) echo "Error: bad TCSENV= setting" 1>&2 exit 1 ;; esac if [ -z "$MMI" ] then MMI=0 fi GPRS=1 SRVC=1 export ACI BUILD_DIR CDGINC CDGPRIM CHIPSET CONDAT DSP GPF GPRS export L1_DYN_DSP_DWNLD MMI RF SRVC USE_STR2IND exec scripts/mk-component.sh "$@"