view src/aci2/aci/l4_tim.h @ 635:baa0a02bc676

niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  L4_TIM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions of timer indices
+----------------------------------------------------------------------------- 
*/ 


/*
 * Timer Indices
 */

#define SMI_TBACKLIGHT           0
#define SMI_TSLIDER              1
#define SMI_TSHIFTKEY            2
#define SMI_TUNIVERSAL           3

#define ACI_TRING                4
#define ACI_TMPTY                5
#define ACI_TFIT                 6
#define ACI_TDTMF                7

#if defined (FAX_AND_DATA)
#define FIT_RUN                  8
#endif

#define AOC_CALLTIMER            9
#define AOC_AOCTIMER             10
#define MAX_AOC_TIMER           7   /* should be changed to MAX_CALL_NR */


/* timers in between are reserved for AOC */
#define MFW_TIMER               (AOC_AOCTIMER+MAX_AOC_TIMER)

#define ACI_IPR                 (MFW_TIMER + 1)
#define ACI_TECT                (ACI_IPR + 1)
#define ACI_TDELAY              (ACI_TECT + 1)

#if defined FF_EOTD /*&& defined _SIMULATION_*/
#define ACI_LC_1                (ACI_TDELAY+1)
#define ACI_LC_2                (ACI_LC_1+1)
#define ACI_LC_3                (ACI_LC_1+2)
#define ACI_LC_4                (ACI_LC_1+3)
#define ACI_LC_5                (ACI_LC_1+4)
#endif

#ifndef FF_EOTD
#define ACI_REPEAT_HND          (ACI_TDELAY +1)
#else
#define ACI_REPEAT_HND          (ACI_LC_1+5)
#endif /* FF_EOTD */

#define ACI_CNMA_TIMER_HANDLE   (ACI_REPEAT_HND+1)

#define ACI_REPEAT_1         5000   /* 5 sec for waiting for 1th redialling */
#define ACI_REPEAT_2_4       60000  /* 1 min for waiting for 2th to 4th redialling */
#define ACI_CNMA_TIMER_VALUE 15000  /* 15 sec. for waiting for the +CNMA */
#define ACI_DELAY_TIMER      5000   /* 5 sec delay for various REDIAL attempts */