FreeCalypso > hg > fc-magnetite

view src/aci2/alr/alr_gprs.h @ 635:baa0a02bc676

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
niq32.c DTR handling restored for targets that have it TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a fixed pull-down resistor on this GPIO line), and the code in niq32.c called UAF_DTRInterruptHandler() (implemented in uartfax.c) from the IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official fw this GPIO is a floating input, all of the DTR handling code in uartfax.c including the interrupt logic is still there, but the hobbled TCS211-20070608 semi-src delivery which OM got from TI contained a change in niq32.c (which had been kept in FC until now) that removed the call to UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test" hacks. The present change fixes this bug at a long last: if we are building fw for a target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c, whereas if we are building fw for a target that does not use this classic GPIO arrangement, the code in niq32.c goes back to what we got from OM and all DTR & DCD code in uartfax.c is conditioned out. This change also removes the very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author Mychaela Falconia <falcon@freecalypso.org>
date Sun, 19 Jan 2020 01:41:35 +0000
parents 93999a60b835
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :
|  Modul   :  J:\g23m-gsm\alr\alr_gprs.h
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :
+-----------------------------------------------------------------------------
*/
typedef struct {
  UBYTE v_ptmsi;
  ULONG ptmsi;
  UBYTE v_ptmsi2;
  ULONG ptmsi2;
  UBYTE ign_pgm;
  UBYTE pbcch;
  UBYTE check_bsic;
  UBYTE ptm;
  UBYTE pim;
  UBYTE sync_only;
  UBYTE pcco_active;
} T_ALR_GPRS_DATA;

#define SI13_ON_NBCCH 0
#define SI13_ON_EBCCH 1

void gprs_alr_get_table            (const T_FUNC**      tab,
                                    USHORT*             n);
void gprs_alr_mon_ctrl_req         (T_MPH_MON_CTRL_REQ* ctrl_req);
BOOL gprs_alr_check_packet_paging  (UBYTE*              frame,
                                    UBYTE               which);
BOOL gprs_alr_check_packet_paging_2(UBYTE*              frame,
                                    UBYTE               which);
BOOL gprs_alr_check_ptmsi          (ULONG               ptmsi_pag);
void gprs_alr_store_ptmsi          (UBYTE indic,
                                    ULONG               tmsi);
void gprs_alr_store_ptmsi2         (UBYTE indic2,
                                    ULONG               tmsi2);

void gprs_alr_check_downlink_assign(T_MPHC_DATA_IND*    data_ind);
void gprs_alr_init                 (void);
BOOL gprs_check_read_si13_only     (UBYTE si13_position);
void gprs_check_page_mode          (T_MPHC_DATA_IND*    data_ind);
void set_gprs_support( UBYTE support );
GLOBAL BOOL gprs_alr_is_supported  (void);