FreeCalypso > hg > fc-magnetite
view src/cs/riviera/rvm/rvm_pool_size.h @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Sun, 19 Jan 2020 01:41:35 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/** * @file rvm_pool_size.h * * Declarations of: * - the memory bank sizes and their watermark * - the SWE stack size * - the pool size needed (generally the sum of memory bank and stack sizes) * * @author Vincent Oberle * @version 0.1 */ /* * History: * * Date Author Modification * ------------------------------------------------------------------- * 07/08/2003 Vincent Oberle Extracted from rvf_pool_size.h * 17/09/2003 Gary Totney Calibrated MB3 for 30 tasks * * * (C) Copyright 2003 by Texas Instruments Incorporated, All Rights Reserved */ #ifndef __RVM_POOL_SIZE_H_ #define __RVM_POOL_SIZE_H_ #ifndef _WINDOWS #include "rv.cfg" // TEST #include "debug.cfg" // TI_PROFILER, TI_NUC_MONITOR #include "board.cfg" // BOARD #include "swconfig.cfg" // GSMLITE #endif /* * RVM SWE; This SWE is of course always enabled. * * Values used in rvm_i.h */ #define RVF_RVM_STACK_SIZE (1500) #if (defined BLUETOOTH) || (TEST==1) || (TI_PROFILER == 1) || (TI_NUC_MONITOR == 1) #define RVF_RVM_MB1_SIZE (13000) #else #if (GSMLITE) #define RVF_RVM_MB1_SIZE (1200) #else #define RVF_RVM_MB1_SIZE (6000) #endif #endif #define RVF_RVM_MB2_SIZE (700) #if (GSMLITE) #define RVF_RVM_MB3_SIZE (3200) #define RVF_RVM_MB4_SIZE (0) #define RVF_RVM_MB5_SIZE (0) #define RVF_RVM_COMPENSATOR_POOL_SIZE (1000) #else #define RVF_RVM_MB3_SIZE (9000) #define RVF_RVM_MB4_SIZE (3000) #define RVF_RVM_MB5_SIZE (3000) #define RVF_RVM_COMPENSATOR_POOL_SIZE (12500+3000) #endif #define RVF_RVM_POOL_SIZE (RVF_RVM_STACK_SIZE + RVF_RVM_MB1_SIZE + \ RVF_RVM_MB2_SIZE + RVF_RVM_MB3_SIZE + \ RVF_RVM_MB4_SIZE + RVF_RVM_MB5_SIZE +\ RVF_RVM_COMPENSATOR_POOL_SIZE ) #endif /*__RVM_POOL_SIZE_H_*/