FreeCalypso > hg > fc-magnetite
view src/g23m-fad/app/bat_cfg.h @ 635:baa0a02bc676
niq32.c DTR handling restored for targets that have it
TI's original TCS211 fw treated GPIO 3 as the DTR input (wired so on C-Sample
and D-Sample boards, also compatible with Leonardo and FCDEV3B which have a
fixed pull-down resistor on this GPIO line), and the code in niq32.c called
UAF_DTRInterruptHandler() (implemented in uartfax.c) from the
IQ_KeypadGPIOHandler() function. But on Openmoko's GTA02 with their official
fw this GPIO is a floating input, all of the DTR handling code in uartfax.c
including the interrupt logic is still there, but the hobbled TCS211-20070608
semi-src delivery which OM got from TI contained a change in niq32.c (which
had been kept in FC until now) that removed the call to
UAF_DTRInterruptHandler() as part of those not-quite-understood "CC test"
hacks.
The present change fixes this bug at a long last: if we are building fw for a
target that has TI's "classic" DTR & DCD GPIO arrangement (dsample, fcmodem and
gtm900), we bring back all of TI's original code in both uartfax.c and niq32.c,
whereas if we are building fw for a target that does not use this classic GPIO
arrangement, the code in niq32.c goes back to what we got from OM and all
DTR & DCD code in uartfax.c is conditioned out. This change also removes the
very last remaining bit of "CC test" bogosity from our FreeCalypso code base.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sun, 19 Jan 2020 01:41:35 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-F&D (8411) | Modul : BAT library +----------------------------------------------------------------------------- | Copyright 2005 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : configuration for binary AT commands +----------------------------------------------------------------------------- */ #ifndef BAT_CFG_H #define BAT_CFG_H #include "typedefs.h" /* to include some defined types */ #include "l2p_types.h" #include "gdd.h" /********************************************************************************* * * defines * *********************************************************************************/ #define L2P_MAINTAIN_SIZE L2P_CONTROL_BLOCK_HDR_SIZE /********************************************************************************* * * enumerations * *********************************************************************************/ typedef enum { DEVICE_PACKET = 0 /*more to be defined*/ }T_BAT_device; /********************************************************************************* * * A description of the GDD interface * *********************************************************************************/ typedef struct { T_GDD_FUNC gdd_if; T_GDD_CAP cap; }T_BAT_adapter; /********************************************************************************* * * A description of the L2P protocol Id * *********************************************************************************/ typedef struct { T_L2P_SUPPORTED_PROTOCOLS protocol_id; }T_BAT_l2p; typedef struct { T_BAT_device device; T_BAT_adapter adapter; T_BAT_l2p l2p; }T_BAT_config; /********************************************************************************* * * with this release the following configuration data should be used * *********************************************************************************/ extern T_BAT_config *BAT_APP_CONFIG; void app_set_config (void); #endif /* BAT_CFG_H */