FreeCalypso > hg > fc-magnetite
view cdg-hybrid/msg/ss.mdf @ 547:c3f2f79dc5b8
l1_rf12.c compiled-in default RF band tables: a round of cleanup
* Uncalibrated default g_magic values changed from old Clara RF numbers
(yes, Clara, not even Leonardo) to the approximately correct value
for our current hw;
* Uncalibrated default Rx and Tx channel calibration tables providing
neutral correction values: fixed bogus ARFCNs from blind copy-n-paste
between different bands;
* Restored #if (ORDER2_TX_TEMP_CAL==1) in the Tx temperature compensation
tables;
* Fully rewrote the big comment before these rf_XXX structures to reflect
the current situation.
This change is part of the larger transition in FreeCalypso from reverse
to forward engineering, from reconstruction of lost original bits to
ongoing forward development and maintenance.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Sat, 17 Nov 2018 19:57:34 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : ss.mdf ;*** Creation : Thu Jun 19 15:32:13 CST 2008 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Air Interface Message Specification ;*** Document Name : ss ;*** Document No. : 6147.601.97.104 ;*** Document Date : 2003-02-04 ;*** Document Status: BEING_PROCESSED ;*** Document Author: LG ;******************************************************************************** PRAGMA SRC_FILE_TIME "Wed Nov 28 10:21:24 2007" PRAGMA LAST_MODIFIED "2003-02-04" PRAGMA ID_AND_VERSION "6147.601.97.104" CONST L3MAX 251 ; maximum size of a L3 buffer CONST MAX_SS_VERSION 1 ; maximum length in SS version VALTAB VAL_ver VAL 0x00 SS_VERSION_PHASE2 "phase 2 service and error handling, ellipsis notation" VALTAB VAL_cs VAL 1 CAUSE_UNASSIGN "Unassigned (unallocated) Note 9 number" VAL 3 CAUSE_NO_ROUTE "No route to destination" VAL 6 CAUSE_CHAN_UNACCEPT "Channel unacceptable" VAL 8 CAUSE_BARRED "Operator determined barring" VAL 16 CAUSE_CALL_CLEAR "Normal call clearing" VAL 17 CAUSE_USER_BUSY "User busy" VAL 18 CAUSE_NO_RESPONSE "No user responding" VAL 19 CAUSE_ALERT_NO_ANSWER "User alerting, no answer" VAL 21 CAUSE_CALL_REJECT "Call rejected" VAL 22 CAUSE_NUM_CHANGED "Number changed" VAL 25 CAUSE_PREEMPTION "Pre-emption" VAL 26 CAUSE_USER_CLEAR "Non selected user clearing" VAL 27 CAUSE_DEST_ORDER "Destination out of order" VAL 28 CAUSE_NUM_FORMAT "Invalid number format (incomplete number)" VAL 29 CAUSE_FACILITY_REJECT "Facility rejected" VAL 30 CAUSE_STATUS_ENQUIRY "Response to STATUS ENQUIRY" VAL 31 CAUSE_UNSPECIFIED "Normal, unspecified" VAL 34 CAUSE_NO_CHAN_AVAIL "No circuit/channel available" VAL 38 CAUSE_NETWORK_ORDER "Network out of order" VAL 41 CAUSE_TEMP_FAIL "Temporary failure" VAL 42 CAUSE_SWITCH_CONGEST "Switching equipment congestion" VAL 43 CAUSE_INFO_DISCARD "Access information discarded" VAL 44 CAUSE_REQ_CHAN_UNAVAIL "requested circuit/channel not available" VAL 47 CAUSE_RESOURCE_UNAVAIL "Resources unavailable, unspecified" VAL 49 CAUSE_QOS_UNAVAIL "Quality of service unavailable" VAL 50 CAUSE_FACILITY_UNSUBSCRIB "Requested facility not subscribed" VAL 55 CAUSE_BARRED_IN_CUG "Incoming calls barred within the CUG" VAL 57 CAUSE_BEARER_CAP_AUTHORIZ "Bearer capability not authorized" VAL 58 CAUSE_BEARER_CAP_UNAVAIL "Bearer capability not presently available" VAL 63 CAUSE_SERVICE_UNAVAIL "Service or option not available, unspecified" VAL 65 CAUSE_BEARER_NOT_IMPLEM "Bearer service not implemented" VAL 68 CAUSE_ACM_MAX "ACM equal to or greater than ACMmax" VAL 69 CAUSE_FACILITY_NOT_IMPLEM "Requested facility not implemented" VAL 70 CAUSE_RESTICT_BEARER_CAP "Only restricted digital information bearer capability is available" VAL 79 CAUSE_SERVICE_NOT_IMPLEM "Service or option not implemented, unspecified" VAL 81 CAUSE_INVALID_TI "Invalid transaction identifier value" VAL 87 CAUSE_USER_NOT_IN_CUG "User not member of CUG" VAL 88 CAUSE_INCOMPAT_DEST "Incompatible destination" VAL 91 CAUSE_INVALID_TRANS_NET "Invalid transit network selection" VAL 95 CAUSE_INCORRECT_MESSAGE "Semantically incorrect message" VAL 96 CAUSE_INVALID_MAND_INFO "Invalid mandatory information" VAL 97 CAUSE_MESSAGE_TYPE_NOT_IMPLEM "Message type non-existent or not implemented" VAL 98 CAUSE_MESSAGE_TYPE_INCOMPAT "Message type not compatible with protocol state" VAL 99 CAUSE_INFO_ELEM_NOT_IMPLEM "Information element non existent or not implemented" VAL 100 CAUSE_COND_INFO_ELEM "Conditional IE error" VAL 101 CAUSE_MESSAGE_INCOMPAT "Message not compatible with protocol state" VAL 102 CAUSE_TIMER "Recovery on timer expiry" VAL 111 CAUSE_PROTOCOL "Protocol error, unspecified" VAL 127 CAUSE_INTERWORKING "Interworking, unspecified" VALTAB VAL_cs2 VAL 0 CS_Q931 "standardized coding as described in CCITT Rec. Q.931" VAL 1 CS_INTERNATIONAL "reserved for other international standards" VAL 2 CS_NATIONAL "national standard" VAL 3 CS_GSM_PLMN "standard defined for the GSM PLMNS as described in 10.86/GSM 04.08" VALTAB VAL_loc VAL DEF "reserved" VAL 0 LOC_USER "user" VAL 1 LOC_PRIV_NET_LOCAL_USER "private network serving the local user" VAL 2 LOC_PUB_NET_LOCAL_USER "public network serving the local user" VAL 3 LOC_TRANSIT_NET "transit network" VAL 4 LOC_PUB_NET_REMOTE_USER "public network serving the remote user" VAL 5 LOC_PRIV_NET_REMOTE_USER "private network serving the remote user" VAL 7 LOC_INTERNATIONAL_NET "international network" VAL 10 LOC_BEYOND_POINT "network beyond interworking point" VAR msg_type "Message Type" 8 VAR fac_info "Facility Information" 8 VAR ver "Version Content" 8 VAL @m_ss - VAL_ver@ VAR cs "Cause" 7 VAL @m_ss - VAL_cs@ VAR cs2 "Coding standard" 2 VAL @m_ss - VAL_cs2@ VAR loc "Location" 4 VAL @m_ss - VAL_loc@ VAR rec "Recommendation" 7 VAR diag "Diagnostics" 8 COMP ss_facility "SS facility" { fac_info [1..L3MAX] ; Facility Information } COMP ss_version "SS version" { ver [0.. MAX_SS_VERSION] ; ss version content } COMP ss_cause "Cause" { + cs2 ; Coding standard II .0 ; Spare - loc ; Location * rec ; Recommendation * cs ; Cause value diag [0..27] ; Diagnostics } MSG d_ss_facility downlink 0b00111010 ; SS Facility { GSM3_V msg_type ; Message Type GSM4_LV ss_facility ; SS facility } MSG u_ss_facility uplink 0b00111010 ; SS Facility { GSM3_V msg_type ; Message Type GSM4_LV ss_facility ; SS facility } MSG d_ss_register downlink 0b00111011 ; SS Register { GSM3_V msg_type ; Message Type GSM4_TLV ss_facility 0x1C ; SS facility } MSG u_ss_register uplink 0b00111011 ; SS Register { GSM3_V msg_type ; Message Type GSM4_TLV ss_facility 0x1C ; SS facility GSM4_TLV ss_version 0x7F ; SS version } MSG b_ss_rel_comp both 0b00101010 ; SS Release Complete { GSM3_V msg_type ; Message Type GSM4_TLV ss_cause 0x08 ; SS cause GSM4_TLV ss_facility 0x1C ; SS facility }