;********************************************************************************
;*** File           : 8010_152_ps_include.pdf
;*** Creation       : Fri Jun 08 13:57:12 CST 2007
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_152_ps_include
;*** Document No.   : 8010.152.02.023
;*** Document Date  : 2003-10-15
;*** Document Status: APPROVED
;*** Document Author: LOE
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Tue May 18 17:03:04 2004"
PRAGMA 	LAST_MODIFIED 	"2003-10-15"
PRAGMA 	ID_AND_VERSION 	"8010.152.02.023"
PRAGMA 	PREFIX 	PS 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines



CONST 	BCC_MAX 	7 	; Maximum value of BCC
CONST 	SIZE_TMSI 	4 	; Size in bytes of Temporary Mobile Subscriber Identity (TMSI)
CONST 	SIZE_P_TMSI 	4 	; Size in bytes of Packet Temporary Mobile Subscriber Identity (P-TMSI)
CONST 	CPICH_RSCP_MAX 	-25 	; Maximum value of CPICH RSCPs for a UMTS cell is -25 dBm
CONST 	CPICH_RSCP_MIN 	-115 	; Minimum value of CPICH RSCPs for a UMTS cell is -115 dBm
CONST 	SIZE_KC 	8 	; Size in bytes of Ciphering Key
CONST 	MAX_EQUIVALENT_PLMNS 	5 	; Maximum number of equivalent PLMNs
CONST 	MAX_FORBIDDEN_LAI 	10 	; Maximum number of forbidden location areas in a forbidden location area list.
CONST 	MAX_GSM_NCELLS 	32 	; Maximum number if GSM neighbour cells when camped on a UMTS cell for dual mode operations (see [3G 25.331]).
CONST 	MAX_GSM_NCELL_INDEX 	31 	; Maximum value of a GSM neighbour cell index for indexing a cell in a GSM neighbour cell list when camped on a UMTS cell for dual mode operations.
CONST 	MAX_UMTS_NCELLS 	64 	; Maximum number of UMTS FDD neighbour cells on one UARFCN when camped on a GSM cell for dual mode operations (see [3G 05.08]).
CONST 	MAX_UMTS_NCELLS_PER_UARFCN 	32 	; Maximum number of UMTS FDD neighbour cells one frequency when camped on a GSM cell for dual mode operations (see [3G 05.08]).
CONST 	MAX_UMTS_NCELL_UARFCNS 	3 	; Maximum number of UMTS FDD channels on which neighbour cells can exist
CONST 	MAX_UMTS_PRECONFIGURATIONS 	16 	; Maximum number of UMTS pre-configurations
CONST 	NCC_MAX 	7 	; Maximum value of NCC cell
CONST 	PSC_MAX 	0x01FF 	; Maximum value of Primary Scrambling Code
CONST 	PSC_MIN 	0x0000 	; Minimum value of Primary Scrambling Code
CONST 	SIZE_ACC 	2 	; Number of bytes used to contain the EFACC of the (U)SIM, see [3G 11.11] and [3G 31.102].
CONST 	SIZE_AI 	2 	; Number of bytes used to contain Additional Information from EFAD of the (U)SIM, see [3G 11.11] and [3G 31.102].
CONST 	SIZE_IMSI_MAX 	15 	; Maximum number of digits in an IMSI
CONST 	SIZE_IMSI_MIN 	6 	; Minimum number of digits in an IMSI
CONST 	SIZE_LAC 	2 	; Minimum size of location area information
CONST 	SIZE_MCC 	3 	; Size in bytes of mobile country code.
CONST 	SIZE_MNC_MAX 	3 	; Three digit (byte) mobile network code
CONST 	SIZE_MNC_MIN 	2 	; Two digit (byte) mobile network code
CONST 	MAX_START_VALUE 	0xFFFFF 	; Maximum value of START parameter
CONST 	SIZE_CK 	0x0010 	; Number of bytes used to contain the Ciphering Key from EFKEYS of the (U)SIM, see [3G 11.11] and [3G 31.102].
CONST 	SIZE_IK 	0x0010 	; Number of bytes used to contain the Integrity Key from EFKEYS of the (U)SIM, see [3G 11.11] and [3G 31.102].
CONST 	SIZE_CN_COMMON_GSM_NAS_SI 	0x0008 	; Number of bytes used to contain a CN Common GSM NAS System Information IE from a network cell [3G 25.331]
CONST 	MAX_UL_SDU 	255 	; Max number of unacknowledged SDUs transferred between RATs.
CONST 	MIN_BCD_VALUE 	0 	; Minimum value of a BCD digit according to [3G 24.008].
CONST 	MAX_BCD_VALUE 	9 	; Maximum value of a BCD digit according to [3G 24.008].
CONST 	MIN_KEY_SEQ_NUM 	0x00 	; Minimum value of ciphering key sequence number.
CONST 	MAX_KEY_SEQ_NUM 	0x06 	; Maximum value of ciphering key sequence number.
CONST 	KEY_SEQ_INVALID 	0x07 	; Corresponds to ciphering key not available, see [3G 24.008] [3G 11.11] and [3G 31.102].
CONST 	MIN_ARFCN_VALUE 	0 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_VALUE 	1023 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM900E_LOW 	0 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM900E_LOW 	124 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM900E_HIGH 	975 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM900E_HIGH 	1023 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM900P 	1 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM900P 	124 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM850 	128 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM850 	251 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM450 	259 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM450 	293 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM480 	306 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM480 	340 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM1800 	512 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM1800 	885 	; ARFCN range, see [3G 05.05]
CONST 	MIN_ARFCN_GSM1900 	512 	; ARFCN range, see [3G 05.05]
CONST 	MAX_ARFCN_GSM1900 	810 	; ARFCN range, see [3G 05.05]
CONST 	MIN_RSSI_GSM 	-110 	; Minimum GSM RSSI in dBm.
CONST 	MAX_RSSI_GSM 	-20 	; Maximum GSM RSSI in dBm.
CONST 	MIN_RSSI_UMTS 	-48 	; Minimum UMTS RSSI in 0.5 dBm units.
CONST 	MAX_RSSI_UMTS 	0 	; Maximum UMTS RSSI in 0.5 dBm units.
CONST 	MIN_UARFCN 	0x0000 	; UARFCN range, see [3G 25.101]
CONST 	MAX_UARFCN 	0x3FFF 	; UARFCN range, see [3G 25.101]



VALTAB 	VAL_content
VAL 	0x00 	ACC_INDEX_CLASSES_8_TO_15 	"Index to use in content array for classes 8 to 15"
VAL 	0x01 	ACC_INDEX_CLASSES_0_TO_7 	"Index to use in content array for classes 0 to 7"
VAL 	0x01 	ACC_MASK_CLASS_00 	"Mask for accessing access class 0"
VAL 	0x02 	ACC_MASK_CLASS_01 	"Mask for accessing access class 1"
VAL 	0x04 	ACC_MASK_CLASS_02 	"Mask for accessing access class 2"
VAL 	0x08 	ACC_MASK_CLASS_03 	"Mask for accessing access class 3"
VAL 	0x10 	ACC_MASK_CLASS_04 	"Mask for accessing access class 4"
VAL 	0x20 	ACC_MASK_CLASS_05 	"Mask for accessing access class 5"
VAL 	0x40 	ACC_MASK_CLASS_06 	"Mask for accessing access class 6"
VAL 	0x80 	ACC_MASK_CLASS_07 	"Mask for accessing access class 7"
VAL 	0x01 	ACC_MASK_CLASS_08 	"Mask for accessing access class 8"
VAL 	0x02 	ACC_MASK_CLASS_09 	"Mask for accessing access class 9"
VAL 	0x04 	ACC_MASK_CLASS_10 	"Mask for accessing access class 10"
VAL 	0x08 	ACC_MASK_CLASS_11 	"Mask for accessing access class 11"
VAL 	0x10 	ACC_MASK_CLASS_12 	"Mask for accessing access class 12"
VAL 	0x20 	ACC_MASK_CLASS_13 	"Mask for accessing access class 13"
VAL 	0x40 	ACC_MASK_CLASS_14 	"Mask for accessing access class 14"
VAL 	0x80 	ACC_MASK_CLASS_15 	"Mask for accessing access class 15"

VALTAB 	VAL_access_modes
VAL 	0 	GSM_VOICE_ONLY 	"GSM voice only mode"
VAL 	1 	GSM 	"GSM voice and data mode"
VAL 	2 	GSM_GPRS 	"GSM voice and data with GPRS mode"
VAL 	3 	UMTS_FDD 	"UMTS FDD only mode"
VAL 	4 	GSM_GPRS_UMTS_FDD 	"GSM voice and data, GPRS and UMTS mode"

VALTAB 	VAL_arfcn_rssi
VAL 	MIN_RSSI_GSM - MAX_RSSI_GSM 	"Range of averaged received signal strength"

VALTAB 	VAL_attach_detach_allowed
VAL 	0 	ATTACH_DETACH_NOT_ALLOWED 	"Attach/detach not allowed"
VAL 	1 	ATTACH_DETACH_ALLOWED 	"Attach/detach allowed"

VALTAB 	VAL_service_level
VAL 	0x00 	LIMITED_SERVICE 	"Camped on acceptable cell. This indicates that the cell is selected for limited service."
VAL 	0x01 	NORMAL_SERVICE 	"Camped on suitable cell. This indicates that the cell is selected for normal service."
VAL 	0x02 	NORMAL_SERVICE_OPERATOR_CELL 	"Camped on a suitable operator cell. This indicates that the cell is selected for normal service, and is reserved for operator use."

VALTAB 	VAL_cn_domain
VAL 	0x00 	CN_DOMAIN_CS 	"Circuit switched core network domain"
VAL 	0x01 	CN_DOMAIN_PS 	"Packet switched core network domain"
VAL 	0x02 	CN_DOMAIN_NOT_IMPORTANT 	"Core network domain not important"

VALTAB 	VAL_cpich_ec_n0
VAL 	MIN_RSSI_UMTS - MAX_RSSI_UMTS 	"The CPICH Ec/N0 parameter has a range from -24 to 0 dB in steps of 0.5. The value is multiplied with 2 to avoid using floating-point numbers."

VALTAB 	VAL_cpich_rscp
VAL 	CPICH_RSCP_MIN - CPICH_RSCP_MAX 	"The range of CPICH RSCP is -115 to -25 dBm in steps of 1."

VALTAB 	VAL_est_service
VAL 	0x00 	SERVICE_SPEECH 	"CS Speech call"
VAL 	0x01 	SERVICE_MULTIMEDIA 	"CS Multimedia call"
VAL 	0x02 	SERVICE_FAX 	"CS Fax call"
VAL 	0x03 	SERVICE_NT_CSD 	"Non transparent CS data call"
VAL 	0x04 	SERVICE_T_CSD 	"Transparent CS data call"
VAL 	0x05 	SERVICE_EMERGE 	"CS emergency speech call"

VALTAB 	VAL_arfcn
VAL 	MIN_ARFCN_VALUE - MAX_ARFCN_VALUE 	"Range of ARFCN, see [3G 05.05]"

VALTAB 	VAL_gsm_band_priority
VAL 	0 	EU_BAND 	"EU band has priority"
VAL 	1 	US_BAND 	"US band has priority"

VALTAB 	VAL_bcc
VAL 	0 - BCC_MAX 	"Range of BCC"

VALTAB 	VAL_ncc
VAL 	0 - NCC_MAX 	"Range of NCC"

VALTAB 	VAL_gsm_frequency_band
VAL 	0x0000 	GSM_BAND_NOT_SET 	"No channel numbers."
VAL 	0x0001 	GSM450 	"Channel numbers from 259 to 293 for GSM450"
VAL 	0x0002 	GSM480 	"Channel numbers from 306 to 340 for GSM480"
VAL 	0x0004 	GSM850 	"Channel numbers from 128 to 251 for GSM850"
VAL 	0x0008 	GSM900P 	"Channel numbers from 1 to 124 for P-GSM900"
VAL 	0x0010 	GSM900E 	"Channel numbers from 0 to 124, and 975 to 1023 for E-GSM900"
VAL 	0x0020 	GSM1800 	"Channel numbers from 512 to 885 for GSM1800"
VAL 	0x0040 	GSM1900 	"Channel numbers from 512 to 810 for GSM1900"
VAL 	0x0039 	GSM1800_BAND_INDICATOR 	"All channel numbers. Channel numbers from 512 to 810 are to be interpreted as GSM1800 channel numbers."
VAL 	0x0046 	GSM1900_BAND_INDICATOR 	"All channel numbers. Channel numbers from 512 to 810 are to be interpreted as GSM1900 channel numbers."

VALTAB 	VAL_gsm_ncell_index
VAL 	0 - MAX_GSM_NCELL_INDEX 	"Range of index"

VALTAB 	VAL_bsic_valid
VAL 	0x00 	BSIC_NOT_VALIDATED 	"BSIC for the cell on this channel is not validated or not matched to that of the specified cell."
VAL 	0x01 	BSIC_VALIDATED 	"BSIC for the cell on this channel is validated and matches that of the specified cell."

VALTAB 	VAL_llc_mode
VAL 	0 	LLC_UNACKNOWLEDGED 	"Unacknowledged SAPI"
VAL 	1 	LLC_ACKNOWLEDGED 	"Acknowledged SAPI"

VALTAB 	VAL_meas_mode
VAL 	0 	MEASURE_IDLE 	"Measurements without a configured DCH"
VAL 	1 	MEASURE_DEDICATED 	"Measurements with a configured DCH"

VALTAB 	VAL_nmo
VAL 	0 	RR_NMO_I 	"Network mode of operation I, only one Paging channel for both: PCCCH or  CCCH"
VAL 	1 	RR_NMO_II 	"Network mode of operation II, Paging only on CCCH"
VAL 	2 	RR_NMO_III 	"Network mode of operation III, Paging on CCCH for CS and either on CCCH or on PCCCH for GPRS, if PCCH allocated in the cell"

VALTAB 	VAL_search_mode
VAL 	0 	SEARCH_MODE_AUTO 	"Automatic network scan"
VAL 	1 	SEARCH_MODE_MAN 	"Manual network scan"

VALTAB 	VAL_peak_throughput
VAL 	0 	PEAK_THROUGHPUT_SUB 	"Subscribed/unknown peak throughput"
VAL 	1 	PEAK_1K 	"Up to 1000 octet/s"
VAL 	2 	PEAK_2K 	"Up to 2000 octet/s"
VAL 	4 	PEAK_4K 	"Up to 4000 octet/s"
VAL 	8 	PEAK_8K 	"Up to 8000 octet/s"
VAL 	16 	PEAK_16K 	"Up to 16000 octet/s"
VAL 	32 	PEAK_32K 	"Up to 32000 octet/s"
VAL 	64 	PEAK_64K 	"Up to 64000 octet/s"
VAL 	128 	PEAK_128K 	"Up to 128000 octet/s"
VAL 	256 	PEAK_256K 	"Up to 256000 octet/s"
VAL 	384 	PEAK_384K 	"Up to 384000 octet/s"

VALTAB 	VAL_t3212
VAL 	1 - 255 	"(6 * value) minutes"
VAL 	0 	NO_PERIODIC_UPDATE 	"No periodic updating"

VALTAB 	VAL_mnc
VAL 	MIN_BCD_VALUE - MAX_BCD_VALUE 	"Range of a MNC digit."

VALTAB 	VAL_mcc
VAL 	MIN_BCD_VALUE - MAX_BCD_VALUE 	"Range of a MCC digit."

VALTAB 	VAL_rat
VAL 	0 	RAT_GSM 	"GSM"
VAL 	1 	RAT_UMTS_FDD 	"UMTS FDD"

VALTAB 	VAL_radio_prio
VAL 	0 	RADIO_PRIO_1 	"radio priority 1 (highest)"
VAL 	1 	RADIO_PRIO_2 	"radio priority 2"
VAL 	2 	RADIO_PRIO_3 	"radio priority 3"
VAL 	3 	RADIO_PRIO_4 	"radio priority 4 (lowest)"

VALTAB 	VAL_rel_ind
VAL 	0 	REL_IND_NO 	"Non-local deactivation"
VAL 	1 	REL_IND_YES 	"Local deactivation"

VALTAB 	VAL_ksi
VAL 	MIN_KEY_SEQ_NUM - MAX_KEY_SEQ_NUM 	"Range of sequence number"
VAL 	KEY_SEQ_INVALID 	 	"Sequence number value indicating that the key is not present (initial value on (U)SIM)"

VALTAB 	VAL_sapi
VAL 	0 	SAPI_0 	"SAPI 0 (GSM only)"
VAL 	1 	SAPI_1 	"SAP for MM"
VAL 	3 	SAPI_3 	"SAP 1 for SNDCP or SAPI 3 (GSM only)"
VAL 	5 	SAPI_5 	"SAP 2 for SNDCP"
VAL 	7 	SAPI_7 	"SAP for SMS"
VAL 	9 	SAPI_9 	"SAP 3 for SNDCP"
VAL 	11 	SAPI_11 	"SAP 4 for SNDCP"
VAL 	255 	SAPI_INVALID 	"Invalid SAPI identifier"

VALTAB 	VAL_sim_type
VAL 	0 	SIM_PRESENT 	"SIM present"
VAL 	1 	USIM_PRESENT 	"USIM present"

VALTAB 	VAL_uarfcn_rssi
VAL 	-100 - -25 	"Range of averaged received signal strength in dBm."

VALTAB 	VAL_uarfcn
VAL 	MIN_UARFCN - MAX_UARFCN 	"UARFCN range, see [3G 25.101]."

VALTAB 	VAL_cell_status
VAL 	0x00 	CELL_STATUS_UNKNOWN 	"It is not known whether this cell is suitable or acceptable at this time."
VAL 	0x01 	CELL_STATUS_UNACCEPTABLE 	"The cell is not acceptable or suitable as defined by the criteria in [3G 25.304]"
VAL 	0x02 	CELL_STATUS_ACCEPTABLE 	"The cell is acceptable as defined by the criteria in [3G 25.304]."
VAL 	0x03 	CELL_STATUS_SUITABLE 	"The cell is suitable as defined by the criteria in [3G 25.304]"

VALTAB 	VAL_psc
VAL 	PSC_MIN - PSC_MAX 	"Range og Primary Scrambling Code"

VALTAB 	VAL_threshold
VAL 	0 - MAX_START_VALUE 	"The THRESHOLD value is 20 bits long"

VALTAB 	VAL_start_val
VAL 	0 - MAX_START_VALUE 	"The START value is max 20 bits"

VALTAB 	VAL_tx_diversity
VAL 	0x00 	TX_DIVERSITY_USED 	"TX diversity used for a cell"
VAL 	0x01 	TX_DIVERSITY_NOT_USED 	"TX diversity not used for a cell"




VAR 	content 	"Content of access control class" 	B

VAL 	@p_8010_152_ps_include - VAL_content@ 	

VAR 	access_modes 	"Supported access modes." 	B

VAL 	@p_8010_152_ps_include - VAL_access_modes@ 	

VAR 	op 	"UE operation mode" 	B


VAR 	ai 	"Additional information" 	B


VAR 	arfcn_rssi 	"GSM channel RSSI measurement" 	C

VAL 	@p_8010_152_ps_include - VAL_arfcn_rssi@ 	

VAR 	attach_detach_allowed 	"Attach/detach allowed" 	B

VAL 	@p_8010_152_ps_include - VAL_attach_detach_allowed@ 	

VAR 	service_level 	"Cell service level" 	B

VAL 	@p_8010_152_ps_include - VAL_service_level@ 	

VAR 	cn_domain 	"Core network domain identity" 	B

VAL 	@p_8010_152_ps_include - VAL_cn_domain@ 	

VAR 	cpich_ec_n0 	"UMTS cell measurement value of CPICH Ec/N0" 	C

VAL 	@p_8010_152_ps_include - VAL_cpich_ec_n0@ 	

VAR 	cpich_rscp 	"UMTS cell measurement value of CPICH RSCP" 	C

VAL 	@p_8010_152_ps_include - VAL_cpich_rscp@ 	

VAR 	est_service 	"Establishment service requested" 	B

VAL 	@p_8010_152_ps_include - VAL_est_service@ 	

VAR 	arfcn 	"GSM channel number" 	S

VAL 	@p_8010_152_ps_include - VAL_arfcn@ 	

VAR 	gsm_band_priority 	"GSM band priority" 	S

VAL 	@p_8010_152_ps_include - VAL_gsm_band_priority@ 	

VAR 	ncc 	"NCC" 	B

VAL 	@p_8010_152_ps_include - VAL_ncc@ 	

VAR 	bcc 	"BCC" 	B

VAL 	@p_8010_152_ps_include - VAL_bcc@ 	

VAR 	gsm_frequency_band 	"Frequency band specification" 	S

VAL 	@p_8010_152_ps_include - VAL_gsm_frequency_band@ 	

VAR 	gsm_ncell_index 	"GSM neighbour cell index" 	B

VAL 	@p_8010_152_ps_include - VAL_gsm_ncell_index@ 	

VAR 	bsic_valid 	"BSIC validated" 	B

VAL 	@p_8010_152_ps_include - VAL_bsic_valid@ 	

VAR 	identity 	"Content of IMSI" 	B


VAR 	key 	"Ciphering key" 	B


VAR 	ul_sequence_number 	"Sequence number of last unacknowledged uplink SDU" 	B


VAR 	dl_sequence_number 	"Sequence number of last unacknowledged downlink SDU (used by the network)" 	B


VAR 	llc_mode 	"LLC mode" 	B

VAL 	@p_8010_152_ps_include - VAL_llc_mode@ 	

VAR 	lac_elements 	"Location area code element" 	B


VAR 	meas_mode 	"Measurement mode" 	B

VAL 	@p_8010_152_ps_include - VAL_meas_mode@ 	

VAR 	mem_handle 	"Memory handle" 	L


VAR 	nmo 	"Network mode of operation" 	B

VAL 	@p_8010_152_ps_include - VAL_nmo@ 	

VAR 	search_mode 	"Search mode for network scan" 	B

VAL 	@p_8010_152_ps_include - VAL_search_mode@ 	

VAR 	content_p_tmsi 	"Content of P-TMSI" 	B


VAR 	peak_throughput 	"Peak throughput QoS parameter" 	S

VAL 	@p_8010_152_ps_include - VAL_peak_throughput@ 	

VAR 	t3212 	"Periodic updating timer" 	B

VAL 	@p_8010_152_ps_include - VAL_t3212@ 	

VAR 	mcc 	"Mobile country code" 	B

VAL 	@p_8010_152_ps_include - VAL_mcc@ 	

VAR 	mnc 	"Mobile network code" 	B

VAL 	@p_8010_152_ps_include - VAL_mnc@ 	

VAR 	rat 	"Radio access technology" 	B

VAL 	@p_8010_152_ps_include - VAL_rat@ 	

VAR 	radio_prio 	"Radio priority" 	B

VAL 	@p_8010_152_ps_include - VAL_radio_prio@ 	

VAR 	rel_ind 	"Local Release Indicator" 	B

VAL 	@p_8010_152_ps_include - VAL_rel_ind@ 	

VAR 	rac 	"Container for packet switched routing area code" 	B


VAR 	ksi 	"Key set identifier" 	B

VAL 	@p_8010_152_ps_include - VAL_ksi@ 	

VAR 	sapi 	"Service Access Point Identifier" 	B

VAL 	@p_8010_152_ps_include - VAL_sapi@ 	

VAR 	l_buf 	"Length in bits" 	S


VAR 	o_buf 	"Offset in bits" 	S


VAR 	buf 	"Message content" 	B


VAR 	sim_type 	"Type of subscriber card present." 	B

VAL 	@p_8010_152_ps_include - VAL_sim_type@ 	

VAR 	content_tmsi 	"Content of TMSI" 	B


VAR 	uarfcn_rssi 	"UMTS channel RSSI measurement" 	C

VAL 	@p_8010_152_ps_include - VAL_uarfcn_rssi@ 	

VAR 	uarfcn 	"UMTS channel number" 	S

VAL 	@p_8010_152_ps_include - VAL_uarfcn@ 	

VAR 	ciphering_key 	"Ciphering key" 	B


VAR 	integrity_key 	"Integrity protection key" 	B


VAR 	cell_status 	"Cell suitability status" 	B

VAL 	@p_8010_152_ps_include - VAL_cell_status@ 	

VAR 	psc 	"FDD primary scrambling code" 	S

VAL 	@p_8010_152_ps_include - VAL_psc@ 	

VAR 	threshold 	"THRESHOLD value" 	L

VAL 	@p_8010_152_ps_include - VAL_threshold@ 	

VAR 	start_val 	"START value (20 bits)" 	L

VAL 	@p_8010_152_ps_include - VAL_start_val@ 	

VAR 	tx_diversity 	"UMTS FDD TX diversity indicator" 	B

VAL 	@p_8010_152_ps_include - VAL_tx_diversity@ 	




COMP 	acc 	 "Container for the access control class field from (U)SIM, see [3G 11.11] and [3G 31.102]"
{
 	content 	[SIZE_ACC] 	 ; Content of access control class
}



COMP 	ad 	 "Container for the administrative data field from (U)SIM, see [3G 11.11] and [3G 31.102]"
{
 	op 	 ; UE operation mode
 	ai 	[SIZE_AI] 	 ; Additional information
}



COMP 	gsm_bands 	 "GSM bands"
{
 	gsm_frequency_band 	 ; Frequency band specification
 	gsm_band_priority 	 ; GSM band priority
}



COMP 	bsic 	 "GSM BSIC"
{
 	ncc 	 ; NCC
 	bcc 	 ; BCC
}



COMP 	gsm_cell_description 	 "GSM channel number and band specification"
{
 	gsm_frequency_band 	 ; Band specification
 	arfcn 	 ; Channel number
 	bsic 	 ; BSIC
}



COMP 	gsm_ncell_list 	 "GSM neighbour cell list"
{
 	gsm_cell_description 	[1.. MAX_GSM_NCELLS] 	 ; GSM neighbour cell descriptions
}



COMP 	gsm_ncell_measurement 	 "GSM neighbour cell measurement result"
{
 	gsm_cell_description 	 ; GSM neighbour cell description
 	bsic_valid 	 ; BSIC validated
 	< () 	arfcn_rssi 	> 	 ; Average received signal level
}



COMP 	gsm_ncell_results 	 "GSM neighbour cell results"
{
 	gsm_ncell_measurement 	[1.. MAX_GSM_NCELLS] 	 ; GSM neighbour cell descriptions
}



COMP 	imsi 	 "Container for a subscriber id"
{
 	identity 	[SIZE_IMSI_MIN..SIZE_IMSI_MAX] 	 ; Content of IMSI
}



COMP 	k_c 	 "Container for GSM ciphering parameter"
{
 	key 	[SIZE_KC] 	 ; Ciphering key
 	ksi 	 ; Ciphering key sequence number
}
TYPEDEF COMP k_c 	k_c_gprs 	 "Container for GPRS ciphering parameter"



COMP 	gsm_key_set 	 "Contains information related to ciphering"
{
 	k_c 	 ; KC
 	k_c_gprs 	 ; KC-GPRS
}



COMP 	ul_sdus 	 "Sequence numbers and mem handles pr. NSAPI"
{
 	ul_sequence_number 	 ; Sequence number of last unacknowledged uplink SDU
 	dl_sequence_number 	 ; Sequence number of last unacknowledged downlink SDU (used by the network)
 	mem_handle 	PTR [0 .. MAX_UL_SDU] 	 ; List of unacknowledged uplink SDUs
}



COMP 	lac 	 "Container for location area code"
{
 	lac_elements 	[SIZE_LAC] 	 ; Location area code element
}



COMP 	operation_mode 	 "Supported radio access technologies"
{
 	access_modes 	 ; Supported access modes
 	< () 	gsm_bands 	> 	 ; GSM bands
}



COMP 	nas_system_info 	 "NAS system information"
{
 	lac 	 ; Location area code
 	< () 	rac 	> 	 ; Routing area code
 	nmo 	 ; Network mode of operation
 	attach_detach_allowed 	 ; Attach / detach allowed
 	t3212 	 ; Periodic updating timer
}



COMP 	p_tmsi 	 "Container for P-TMSI"
{
 	content_p_tmsi 	[SIZE_P_TMSI] 	 ; Content of P-TMSI
}



COMP 	plmn_id 	 "Container for a GSM MAP network identifier"
{
 	mcc 	[SIZE_MCC] 	 ; Mobile country code
 	mnc 	[SIZE_MNC_MIN..SIZE_MNC_MAX] 	 ; Mobile network code
}
TYPEDEF COMP plmn_id 	selected_plmn 	 "Selected network identifier"
TYPEDEF COMP plmn_id 	home_plmn 	 "Home network identifier"
TYPEDEF COMP plmn_id 	equivalent_plmn 	 "Equivalent network identifier"



COMP 	lai 	 "Container for location area information"
{
 	plmn_id 	 ; Network ID
 	lac 	 ; Location area code
}



COMP 	forbidden_lai 	 "Container for forbidden location area list"
{
 	lai 	[1.. MAX_FORBIDDEN_LAI] 	 ; location area information
}



COMP 	equivalent_plmn_list 	 "Container for equivalent PLMN list"
{
 	equivalent_plmn 	[0..MAX_EQUIVALENT_PLMNS] 	 ; Equivalent PLMN
}



COMP 	rai 	 "Container for packet switched routing area identification"
{
 	lai 	 ; Location area information
 	rac 	 ; Routing area code
}



COMP 	ps_loci 	 "Container for packet switched location information"
{
 	rai 	 ; Routing area identification
 	< () 	p_tmsi 	> 	 ; P-TMSI
}



COMP 	sdu 	 "Container for a message"
{
 	l_buf 	 ; Length in bits
 	o_buf 	 ; Offset in bits
 	buf 	[1] 	 ; Message content
}



COMP 	tmsi 	 "Container for TMSI"
{
 	content_tmsi 	[SIZE_TMSI] 	 ; Content of TMSI
}



COMP 	loci 	 "Container for location information"
{
 	lai 	 ; Location area information
 	< () 	tmsi 	> 	 ; TMSI
}



COMP 	umts_cell_description 	 "Container for cell description information for a UMTS cell"
{
 	uarfcn 	 ; UMTS Channel number
 	psc 	 ; UMTS Primary scrambling code
 	< () 	tx_diversity 	> 	 ; UMTS TX diversity indicator
}



COMP 	key_set 	 "Ciphering and integrity keys for a CN domain"
{
 	ksi 	 ; Key set identifier
 	ciphering_key 	[SIZE_CK] 	 ; Ciphering key
 	integrity_key 	[SIZE_IK] 	 ; Integrity protection key
}



COMP 	umts_ncell_list 	 "UMTS neighbour cell list"
{
 	umts_cell_description 	[1.. MAX_UMTS_NCELLS] 	 ; UMTS neighbour cell descriptions
}



COMP 	umts_ncell_measurement 	 "UMTS neighbour cell measurement result"
{
 	psc 	 ; Primary scrambling code
 	cell_status 	 ; Cell suitability status
 	< () 	cpich_rscp 	> 	 ; CPICH RSCP
 	< () 	cpich_ec_n0 	> 	 ; CPICH Ec/N0
}



COMP 	umts_ncell_results 	 "UMTS neighbour cell results"
{
 	uarfcn 	 ; Channel
 	uarfcn_rssi 	 ; Channel RSSI
 	umts_ncell_measurement 	[1..MAX_UMTS_NCELLS_PER_UARFCN] 	 ; Cell measurements
}



COMP 	cs_security_parms 	 "Contains parameters related to ciphering and integrity protection for CS domain."
{
 	key_set 	 ; Ciphering and integrity keys
 	< () 	start_val 	> 	 ; Start value (PS)
}
TYPEDEF COMP cs_security_parms 	ps_security_parms 	 "Contains parameters related to ciphering and integrity protection for PS domain."



COMP 	umts_security_info 	 "Contains information related to UMTS ciphering and integrity protection."
{
 	< () 	threshold 	> 	 ; THRESHOLD value
 	cs_security_parms 	 ; UMTS circuit switched security parameters
 	ps_security_parms 	 ; UMTS packet switched security parameters
}



COMP 	security_info 	 "Contains information related to ciphering and integrity protection."
{
 	sim_type 	 ; SIM type
 	< () 	gsm_key_set 	> 	 ; GSM specific security information
 	< () 	umts_security_info 	> 	 ; UMTS specific security information
}






; PS_EXPORT 	0x0000



PRIM 	PS_EXPORT 	0x0000
{
 	acc 	 ; Access control class
 	ad 	 ; Administrative data
 	arfcn 	 ; GSM channel number
 	arfcn_rssi 	 ; GSM channel RSSI measurement
 	bsic 	 ; GSM BSIC
 	cn_domain 	 ; Core network domain identity
 	cpich_ec_n0 	 ; UMTS cell measurement value of CPICH Ec/N0
 	cpich_rscp 	 ; UMTS cell measurement value of CPICH RSCP
 	est_service 	 ; Establisment service
 	cs_security_parms 	 ; UMTS security parameters
 	equivalent_plmn 	 ; Equivalent network identifier
 	equivalent_plmn_list 	 ; Container for equivalent PLMN list
 	forbidden_lai 	 ; Container for forbidden location area list
 	gsm_cell_description 	 ; GSM channel number and band specification
 	gsm_frequency_band 	 ; Frequency band specification
 	gsm_ncell_index 	 ; GSM neighbour cell index
 	gsm_ncell_list 	 ; GSM neighbour cell list
 	gsm_ncell_measurement 	 ; GSM neighbour cell measurement result
 	gsm_ncell_results 	 ; GSM neighbour cell results
 	gsm_key_set 	 ; GSM Key Set for Ciphering
 	home_plmn 	 ; Home network identifier
 	imsi 	 ; Container for a subscriber id
 	k_c 	 ; KC
 	k_c_gprs 	 ; KC-GPRS
 	key_set 	 ; UMTS key set for ciphering and integrity handling
 	ksi 	 ; UMTS key set identifier
 	lac 	 ; Container for location area code
 	lai 	 ; Container for location area information
 	loci 	 ; Location information
 	llc_mode 	 ; LLC mode
 	meas_mode 	 ; Measurement mode
 	mem_handle 	 ; Memory Handle
 	nas_system_info 	 ; NAS system information
 	operation_mode 	 ; Supported radio access technologies.
 	p_tmsi 	 ; Packet temporary mobile subscriber identity
 	peak_throughput 	 ; Peak Trhoughput QoS Parameter
 	plmn_id 	 ; Container for a GSM MAP network identifier
 	ps_loci 	 ; Packet switched location information
 	ps_security_parms 	 ; UMTS security parameters
 	psc 	 ; FDD primary scrambling code
 	radio_prio 	 ; Radio Priority
 	rac 	 ; Routing Area Code
 	rai 	 ; Routing Area Identification
 	rat 	 ; Radio Access Technology Identifier
 	rel_ind 	 ; Local Release Indicator
 	sapi 	 ; Service Access Point Identifier
 	search_mode 	 ; Search mode for network scan
 	security_info 	 ; Security Information
 	selected_plmn 	 ; Selected network identifier
 	start_val 	 ; UMTS START value
 	sim_type 	 ; Subscriber card type
 	tmsi 	 ; Temporary mobile subscriber identity
 	tx_diversity 	 ; UMTS FDD TX diversity indicator
 	uarfcn 	 ; UMTS channel number
 	uarfcn_rssi 	 ; UMTS channel RSSI measurement
 	ul_sdus 	 ; List of Unacknowledged SDUs
 	umts_cell_description 	 ; Container for cell description information for a UMTS cell
 	umts_ncell_list 	 ; UMTS neighbour cell list
 	umts_ncell_measurement 	 ; UMTS neighbour cell measurement result
 	umts_ncell_results 	 ; UMTS neighbour cell results
 	umts_security_info 	 ; UMTS security information
 	service_level 	 ; Service Level
 	sdu 	 ; Container for a message
}