view cdg211/cdginc/p_mph.val @ 485:c9a65db8be4a
doc/Freerunner-Howto: update for the current situation
| author |
Mychaela Falconia <falcon@freecalypso.org> |
| date |
Thu, 21 Jun 2018 06:39:54 +0000 (2018-06-21) |
| parents |
56abf6cf8a0b |
| children |
|
line source
/*
+--------------------------------------------------------------------------+
| PROJECT : PROTOCOL STACK |
| FILE : p_mph.val |
| SOURCE : "__out__\g23m_dfile\prim\mph.pdf" |
| LastModified : "2003-02-04" |
| IdAndVersion : "6148.109.01.207" |
| SrcFileTime : "Fri Apr 28 11:06:12 2006" |
| Generated by CCDGEN_2.5.5 on Fri Jun 08 13:59:15 2007 |
| !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! |
+--------------------------------------------------------------------------+
*/
/* PRAGMAS
* PREFIX : NONE
* COMPATIBILITY_DEFINES : NO (require PREFIX)
* ALWAYS_ENUM_IN_VAL_FILE: NO
* ENABLE_GROUP: NO
* CAPITALIZE_TYPENAME: NO
*/
#ifndef P_MPH_VAL
#define P_MPH_VAL
#define CDG_ENTER__P_MPH_VAL
#define CDG_ENTER__FILENAME _P_MPH_VAL
#define CDG_ENTER__P_MPH_VAL__FILE_TYPE CDGINC
#define CDG_ENTER__P_MPH_VAL__LAST_MODIFIED _2003_02_04
#define CDG_ENTER__P_MPH_VAL__ID_AND_VERSION _6148_109_01_207
#define CDG_ENTER__P_MPH_VAL__SRC_FILE_TIME _Fri_Apr_28_11_06_12_2006
#include "CDG_ENTER.h"
#undef CDG_ENTER__P_MPH_VAL
#undef CDG_ENTER__FILENAME
/*
* Value constants for VAL_arfcn
*/
#define VAL_ARFCN___0 (0x0) /* E-GSM 900 */
#define VAL_ARFCN___1000 (0x1000) /* E-GSM 900 (E-GSM mode, std=2) */
#define VAL_ARFCN___3000 (0x3000) /* E-GSM 900 (Extended dual mode, std=6) */
/*
* Value constants for VAL_comb_ccch
*/
#define COMB_CCCH_NOT_COMB (0x0) /* CCCH not combined with SDCCH */
#define COMB_CCCH_COMB (0x1) /* CCCH combined with SDCCH */
/*
* Value constants for VAL_tn
*/
/*
* Value constants for VAL_dlt
*/
/*
* Value constants for VAL_pg
*/
/*
* Value constants for VAL_bs_ag_blocks_res
*/
/*
* Value constants for VAL_bs_pa_mfrms
*/
#define VAL_BS_PA_MFRMS___0 (0x0) /* 2 Multiframe Periods */
#define VAL_BS_PA_MFRMS___1 (0x1) /* 3 Multiframe Periods */
#define VAL_BS_PA_MFRMS___2 (0x2) /* 4 Multiframe Periods */
#define VAL_BS_PA_MFRMS___3 (0x3) /* 5 Multiframe Periods */
#define VAL_BS_PA_MFRMS___4 (0x4) /* 6 Multiframe Periods */
#define VAL_BS_PA_MFRMS___5 (0x5) /* 7 Multiframe Periods */
#define VAL_BS_PA_MFRMS___6 (0x6) /* 8 Multiframe Periods */
#define VAL_BS_PA_MFRMS___7 (0x7) /* 9 Multiframe Periods */
/*
* Value constants for VAL_power
*/
/*
* Value constants for VAL_rx_lev
*/
/*
* Value constants for VAL_rx_qual_full
*/
/*
* Value constants for VAL_bsic
*/
#define MPH_BSIC_UNKNOWN (0x40) /* Cell is removed from list (GPRS) */
/*
* Value constants for VAL_dtx
*/
#define DTX_NOT_USED (0x0) /* DTX is not used */
#define DTX_USED (0x1) /* DTX is used */
/*
* Value constants for VAL_otd
*/
/*
* Value constants for VAL_ta
*/
#define TA_NOT_AVAIL (0xff) /* timing advance is not available in Idle Mode */
/*
* Value constants for VAL_v_start
*/
#define VAL_V_START___0 (0x0) /* not valid */
#define VAL_V_START___1 (0x1) /* valid */
/*
* Value constants for VAL_ch
*/
#define CH_TCH_F (0x1) /* TCH/F, FACCH Full Rate */
#define CH_TCH_H_1 (0x2) /* TCH/H(1), FACCH Half Rate */
#define CH_TCH_H_2 (0x3) /* TCH/H(2), FACCH Half Rate */
#define CH_SDCCH_4_0 (0x4) /* SDCCH/4(0) */
#define CH_SDCCH_4_1 (0x5) /* SDCCH/4(1) */
#define CH_SDCCH_4_2 (0x6) /* SDCCH/4(2) */
#define CH_SDCCH_4_3 (0x7) /* SDCCH/4(3) */
#define CH_SDCCH_8_0 (0x8) /* SDCCH/8(0) */
#define CH_SDCCH_8_1 (0x9) /* SDCCH/8(1) */
#define CH_SDCCH_8_2 (0xa) /* SDCCH/8(2) */
#define CH_SDCCH_8_3 (0xb) /* SDCCH/8(3) */
#define CH_SDCCH_8_4 (0xc) /* SDCCH/8(4) */
#define CH_SDCCH_8_5 (0xd) /* SDCCH/8(5) */
#define CH_SDCCH_8_6 (0xe) /* SDCCH/8(6) */
#define CH_SDCCH_8_7 (0xf) /* SDCCH/8(7) */
/*
* Value constants for VAL_tsc
*/
/*
* Value constants for VAL_h
*/
#define H_NO (0x0) /* no hopping */
#define H_FREQ (0x1) /* frequency hopping */
/*
* Value constants for VAL_maio
*/
/*
* Value constants for VAL_hsn
*/
/*
* Value constants for VAL_rlt
*/
/*
* Value constants for VAL_pwrc
*/
#define PWRC_NOT_SET (0x0) /* PWRC is not set, exact meaning is defined in GSM 05.08 */
#define PWRC_SET (0x1) /* PWRC is set, exact meaning is defined in GSM 05.08 */
/*
* Value constants for VAL_tav
*/
/*
* Value constants for VAL_algo
*/
#define ALGO_A5_1 (0x0) /* A5/1 */
#define ALGO_A5_2 (0x1) /* A5/2 */
#define ALGO_A5_3 (0x2) /* A5/3 */
#define ALGO_A5_4 (0x3) /* A5/4 */
#define ALGO_A5_5 (0x4) /* A5/5 */
#define ALGO_A5_6 (0x5) /* A5/6 */
#define ALGO_A5_7 (0x6) /* A5/7 */
/*
* Value constants for VAL_mod
*/
#define MODE_CELL_SELECTION (0x0) /* cell selection */
#define MODE_CELL_RESELECTION (0x1) /* cell reselection */
#define VAL_MOD___2 (0x2) /* unused */
#define MODE_IMM_ASSIGN (0x3) /* immediate assignment */
#define MODE_CHAN_ASSIGN (0x4) /* channel assignment */
#define MODE_ASYNC_HANDOVER (0x5) /* asynchronous handover */
#define MODE_SYNC_HANDOVER (0x6) /* synchronous handover */
#define MODE_PRE_SYNC_HANDOVER (0x7) /* pre synchronous handover */
#define MODE_PSEUDO_SYNC_HANDOVER (0x8) /* pseudo synchronous handover */
#define MODE_SYS_INFO_CHANGE (0x9) /* sys info has changed */
#define MODE_PACKET_TRANSFER (0xa) /* enter packet transfer mode */
#define MODE_PDCH_ASSIGN (0xb) /* PDCH assignment */
#define MODE_CELL_CHANGE_ORDER (0xc) /* network controlled cell change */
#define MODE_CELL_RESELECTION_SYNC_ONLY (0xd) /* Sync only */
#define MODE_CONFIG_PL (0xe) /* Config idle mode params, but don't start processes in L1 */
/*
* Value constants for VAL_mode
*/
#define MODE_SIG_ONLY (0x0) /* signalling only */
#define MODE_SPEECH_VER1 (0x1) /* speech (full rate or half rate), version 1 */
#define MODE_SPEECH_VER2 (0x21) /* speech (full rate or half rate), version 2 */
#define MODE_SPEECH_VER3 (0x41) /* speech (full rate or half rate), version 3 */
#define MODE_DATA_14_5 (0xf) /* data, 14.5 kbit/s radio interface rate, corresponds to 14.4 kbit/s user rate */
#define MODE_DATA_12_0 (0x3) /* data, 12.0 kbit/s radio interface rate, corresponds to 9.6 kbit/s user rate */
#define MODE_DATA_6_0 (0xb) /* data, 6.0 kbit/s radio interface rate, corresponds to 4.8 kbit/s user rate */
#define MODE_DATA_3_6 (0x13) /* data, 3.6 kbit/s radio interface rate, corresponds to 2.4 kbit/s user rate */
/*
* Value constants for VAL_st_mode
*/
#define CODEC_MODE_1 (0x0) /* lowest codec mode */
#define CODEC_MODE_2 (0x1) /* second lowest mode */
#define CODEC_MODE_3 (0x2) /* third lowest mode */
#define CODEC_MODE_4 (0x3) /* highest mode */
/*
* Value constants for VAL_cs
*/
#define CS_NO_BCCH_AVAIL (0x0) /* no BCCH available */
#define CS_DOWN_LINK_FAIL (0x1) /* down link failure */
#define CS_RADIO_LINK_FAIL (0x2) /* radio link failure */
#define CS_NO_HBCCH_AVAIL (0x3) /* no HPLMN BCCH available */
#define CS_BCCH_READ_ERROR (0x8) /* error during BCCH reading */
#define CS_STOP_BCCH_READING (0xa) /* stop BCCH reading */
#define CS_STOP_PLMN_SEARCH (0xb) /* Stop PLMN search */
#define CS_CLEAN_SYS_INFO (0xc) /* Clean System Information buffer */
#define CS_SYS_INFO_1_NOT_NEEDED (0xd) /* System info 1 is not needed */
#define CS_RXLEV_VAL_REQ (0xe) /* Rxlev values are requested */
#define CS_STOP_PLMN_SEARCH_AND_DEACTIVATE (0xf) /* Stop PLMN search and enter sleep mode */
#define CS_SCELL_IS_SYNCED (0x10) /* Synchronization done */
#define CS_START_PCCO (0x11) /* start of packet cell change order and the cell is not in the BA list */
#define CS_NC_SYNC_FAILED (0x12) /* Lost synchronization with neighbour cell */
#define CS_NO_ERROR (0xff) /* no error occurred */
/*
* Value constants for VAL_pclass
*/
#define CLASS_1 (0x0) /* class 1 */
#define CLASS_2 (0x1) /* class 2 */
#define CLASS_3 (0x2) /* class 3 */
#define CLASS_4 (0x3) /* class 4 */
#define CLASS_5 (0x4) /* class 5 */
/*
* Value constants for VAL_tch_loop
*/
#define VAL_TCH_LOOP___FF (0xff) /* NOT_PRESENT_8BIT, open TCH loop, valid OPEN_LOOP_CMD message has been received */
#define TCH_LOOP_A (0x0) /* Internal test TCH loop command A */
#define TCH_LOOP_B (0x1) /* Internal test TCH loop command B */
#define TCH_LOOP_C (0x2) /* Internal test TCH loop command C */
#define TCH_LOOP_D (0x3) /* Internal test TCH loop command D */
#define TCH_LOOP_E (0x4) /* Internal test TCH loop command E */
#define TCH_LOOP_F (0x5) /* Internal test TCH loop command F */
#define TCH_LOOP_I (0x6) /* Internal test TCH loop command I */
/*
* Value constants for VAL_dedi_res
*/
#define DEDI_RES_OK (0x0) /* success */
#define DEDI_RES_TIMEOUT (0x1) /* timeout */
#define DEDI_RES_TA_OUT_OF_RANGE (0x2) /* timing advance out of range */
#define DEDI_RES_CELL_NOT_SYNC (0x3) /* cell not sync by ALR */
/*
* Value constants for VAL_device
*/
#define DAI_NO_TEST (0x0) /* normal operation (no tested device via DAI) */
#define DAI_SPEECH_DL (0x1) /* test of speech decoder / DTX downlink */
#define DAI_SPEECH_UL (0x2) /* test of speech decoder / DTX uplink */
#define DAI_AD_DA (0x4) /* test of acoustic devicesand A/D and D/A */
/*
* Value constants for VAL_ho_pow
*/
/*
* Value constants for VAL_ho_acc_type
*/
#define VAL_HO_ACC_TYPE___0 (0x0) /* sending of HANDOVER ACCESS is mandatory */
#define VAL_HO_ACC_TYPE___1 (0x1) /* sending of HANDOVER ACCESS is optional */
/*
* Value constants for VAL_ho_nci
*/
#define NCI_TA_OUT_OF_RANGE_OK (0x0) /* timing advance out of range allowed */
#define NCI_TA_OUT_OF_RANGE_NOT_ALLOWED (0x1) /* timing advance out of range not allowed */
/*
* Value constants for VAL_multi_band
*/
#define MULTI_BAND_0 (0x0) /* normal operation */
#define MULTI_BAND_1 (0x1) /* one cell of the non-serving cell band */
#define MULTI_BAND_2 (0x2) /* two cells of the non-serving cell band */
#define MULTI_BAND_3 (0x3) /* three cells of the non-serving cell band */
/*
* Value constants for VAL_len_imsi
*/
#define VAL_LEN_IMSI___0 (0x0) /* indicates not valid */
/*
* Value constants for VAL_identity_type
*/
#define ID_IMSI (0x1) /* Paged by IMSI */
#define ID_TMSI (0x4) /* Paged by TMSI */
#define ID_PTMSI (0x8) /* Paged by PTMSI */
/*
* Value constants for VAL_channel_needed
*/
#define CN_ANY (0x0) /* Any channel */
#define CN_SDCCH (0x1) /* SDCCH */
#define CN_TCH_FULL (0x2) /* TCH Full Rate */
#define CN_TCH_H_OR_F (0x3) /* TCH Half Rate or Full Rate */
#define CN_PACKET (0x4) /* Packet Channel (GPRS only) */
/*
* Value constants for VAL_pch_interrupt
*/
#define NO_PCH_INTERRUPT (0x0) /* Power measurements with PCH listening */
#define PCH_INTERRUPT (0x1) /* Power measurements without PCH listening */
/*
* Value constants for VAL_freq_bands
*/
#define BAND_AUTO (0x0) /* 0b00000000: All bands shall be scanned */
#define BAND_GSM_900 (0x1) /* 0b00000001: GSM 900 is supported, shall be scanned */
#define BAND_DCS_1800 (0x2) /* 0b00000010: DCS 1800 is supported, shall be scanned */
#define BAND_PCS_1900 (0x4) /* 0b00000100: PCS 1900 is supported, shall be scanned */
#define BAND_E_GSM (0x8) /* 0b00001000: Extended GSM is supported, shall be scanned */
#define BAND_GSM_850 (0x10) /* 0b00010000: GSM 850 is supported, shall be scanned */
#define BAND_GSM_450 (0x20) /* 0b00100000: GSM 450 is supported, shall be scanned */
#define BAND_GSM_480 (0x40) /* 0b01000000: GSM 480 is supported, shall be scanned */
#define BAND_R_GSM (0x80) /* 0b10000000: R-GSM is supported, shall be scanned */
#define BAND_DUAL (0x3) /* 0b00000011: GSM 900 and DCS 1800 is supported, shall be scanned */
#define BAND_DUAL_EXT (0xb) /* 0b00001011: GSM 900, E-GSM and DCS 1800 is supported, shall be scanned */
#define BAND_DUAL_US (0x14) /* 0b00010100: GSM 850 and PCS 1900 is supported, shall be scanned */
/*
* Value constants for VAL_no
*/
#define NO_STP_SND_CONT_SND (0x0) /* stop sending of RACH bursts */
/*
* Value constants for VAL_t1
*/
/*
* Value constants for VAL_t2
*/
/*
* Value constants for VAL_t3
*/
/*
* Value constants for VAL_action
*/
#define START_MON_NBCCH (0x0) /* start reading of BCCH, excluding ext BCCH */
#define START_MON_EBCCH (0x1) /* start reading of ext BCCH, excluding BCCH */
#define STOP_MON_BCCH (0x2) /* stop reading of BCCH, including both BCCH and ext BCCH (if previously requested) */
#define START_MON_CCCH (0x3) /* start reading of CCCH */
#define STOP_MON_CCCH (0x4) /* stop reading of CCCH */
#define LEAVING_PIM_PBCCH (0x5) /* Leave PIM */
#define LEAVING_PAM_PBCCH (0x6) /* Leave PAM */
#define LEAVING_PTM_PBCCH (0x7) /* Leave PTM */
#define ENTER_PTM_PBCCH (0x8) /* Enter PTM */
#define ENTER_PIM_PBCCH (0x9) /* Enter PIM */
#define ENTER_PTM_BCCH (0xa) /* Enter PTM for BCCH */
/*
* Value constants for VAL_si_to_read
*/
#define UNSPECIFIED_SI (0x0) /* Update of unspecified SI message or SI messages */
#define UPDATE_SI1 (0x1) /* Update of SI1 message */
#define UPDATE_SI2_SI2BIS_OR_SI2TER (0x2) /* Update of SI2, SI2 bis or SI2 ter message */
#define UPDATE_SI3_SI4_SI7_OR_SI8 (0x3) /* Update of SI3, SI4, SI7 or SI8 message */
#define UPDATE_SI9 (0x4) /* Update of SI9 message */
#define COMPLETE_SI (0x5) /* Read complete SI */
#define UPDATE_SI13_GSM (0x6) /* Read SI13 during GPRS activation */
#define UPDATE_SI13 (0xff) /* Update SI13 */
/*
* Value constants for VAL_reorg_only
*/
#define NORMAL_PGM (0x0) /* ignore this parameter (and do not ignore Page Mode IE in PAGING REQUEST messages); used to switch off REORG_ONLY */
#define REORG_ONLY (0x1) /* set page mode to paging reorganisation */
/*
* Value constants for VAL_sync_only
*/
#define NORMAL_BA (0x0) /* normal GSM behaviour */
#define SYNC_LIST (0x1) /* GPRS sync only */
#define RECONFIRM_SYNC_LIST (0x2) /* Reconfirm Sync 10 sec timer for Pbcch Cells */
/*
* Value constants for VAL_gprs_sync
*/
#define NORMAL_MEAS_REP (0x0) /* normal GSM behaviour */
#define SYNC_RESULTS (0x1) /* GPRS sync only */
/*
* Value constants for VAL_ba_id
*/
/*
* Value constants for VAL_stat
*/
#define STAT_INACT (0x0) /* inactive */
#define STAT_ACT (0x1) /* active */
#define STAT_CIPH_OFF (0x0) /* ciphering off */
#define STAT_CIPH_ON (0x1) /* ciphering on */
/*
* Value constants for VAL_eotd_res
*/
#define EOTD_SUCC (0x0) /* success */
#define EOTD_REF (0x1) /* wrong reference BTS */
/*
* Value constants for VAL_mfrm_offset
*/
/*
* Value constants for VAL_otd_type
*/
#define ROUGH_OTD (0x0) /* only roughOTD has been provided by the NW */
#define EXPECTED_OTD (0x1) /* only expectedOTD has been provided by the NW */
#define BOTH_OTD (0x2) /* Both OTD type have been provided by the NW */
/*
* Value constants for VAL_exp_otd
*/
/*
* Value constants for VAL_uncertainty
*/
#define UNC_MAX_2BIT (0x0) /* uncertainty in bits. 0 - 2 bits */
#define UNC_MAX_4BIT (0x1) /* uncertainty in bits. 3 - 4 bits */
#define UNC_MAX_8BIT (0x2) /* uncertainty in bits. 5 - 8 bits */
#define UNC_MAX_12BIT (0x3) /* uncertainty in bits. 9 - 12 bits */
#define UNC_MAX_16BIT (0x4) /* uncertainty in bits. 13 - 16 bits */
#define UNC_MAX_22BIT (0x5) /* uncertainty in bits. 17 - 22 bits */
#define UNC_MAX_30BIT (0x6) /* uncertainty in bits. 23 - 30 bits */
#define UNC_GT_30BIT (0x7) /* uncertainty in bits. > 30 bits */
/*
* Value constants for VAL_rough_rtd
*/
#define VAL_ROUGH_RTD___0 (0x0) /* roughRTD in bits (see expected OTD) */
/*
* Value constants for VAL_eotd_avail
*/
#define VAL_EOTD_AVAIL___0 (0x0) /* EOTD is not available */
#define VAL_EOTD_AVAIL___1 (0x1) /* EOTD is available */
/*
* Value constants for VAL_gprs_support
*/
#define MPH_GPRS_PROCS_USED (0x1) /* yes */
#define MPH_GPRS_PROCS_NOT_USED (0x0) /* no */
/*
* Value constants for VAL_si_to_clean
*/
#define IND_SI_1 (0x1) /* Clean SI 1 buffer */
#define IND_SI_2 (0x2) /* Clean SI 2 buffer */
#define IND_SI_2BIS (0x4) /* Clean SI 2bis buffer */
#define IND_SI_2TER (0x8) /* Clean SI 2ter buffer */
#define IND_SI_3 (0x10) /* Clean SI 3 buffer */
#define IND_SI_4 (0x20) /* Clean SI 4 buffer */
#define IND_SI_13 (0x40) /* Clean SI 13 buffer */
#define IND_SI_5 (0x100) /* Clean SI 5 buffer */
#define IND_SI_5BIS (0x200) /* Clean SI 5bis buffer */
#define IND_SI_5TER (0x400) /* Clean SI 5ter buffer */
#define IND_SI_6 (0x800) /* Clean SI 6 buffer */
#define IND_ALL_IDLE_SI (0x7f) /* Clean all SI of idle mode */
#define IND_ALL_IDLE_BA (0xe) /* Clean all SI of idle mode BA list */
#define IND_ALL_DEDI_SI (0xf00) /* Clean all SI of dedicated mode */
#define IND_ALL_DEDI_BA (0x700) /* Clean all SI of dedicated mode BA list */
#define IND_ALL_SI (0xf7f) /* Clean all SI buffers */
/*
* Value constants for VAL_cause
*/
#define NC_STOP_MEAS (0x0) /* Stop the measurement */
#define NC_START_MEAS (0x1) /* Start Averaging the measurements */
#define NC_REPORT_MEAS (0x2) /* get the meas report from RR */
/*
* Value constants for VAL_region
*/
#define EUROPEAN_REGION (0x0) /* Indicates European region */
#define AMERICAN_REGION (0x1) /* Indicates American region */
/*
* Value constants for VAL_search_mode
*/
#define FULL_SEARCH_MODE (0x0) /* Identifies 'Full Search' mode, default mode */
#define NORMAL_SEARCH_MODE (0x1) /* Identifies 'Normal Search' mode */
#define FAST_SEARCH_MODE (0x2) /* Identifies 'Fast Search' mode */
#define BLACK_LIST_SEARCH_MODE (0x3) /* Identifies 'Black List Search' mode */
/*
* Value constants for VAL_whitelist_valid
*/
#define WHITELIST_NOT_VALID (0x0) /* not valid */
#define WHITELIST_VALID (0x1) /* valid */
/*
* user defined constants
*/
#define MAX_MA_CHANNELS (0x40)
#define MAX_NEIGHBOURCELLS (0x21)
#define MAX_CHANNELS (0xa0)
#define MAX_NCELL_EOTD_ALR (0xf)
#define MAX_NCELL_EOTD_RES (0xc)
#define XCOR_NO (0x12)
#define STD_900 (0x1)
#define STD_EGSM (0x2)
#define STD_1900 (0x3)
#define STD_1800 (0x4)
#define STD_DUAL (0x5)
#define STD_DUAL_EGSM (0x6)
#define STD_850 (0x7)
#define STD_DUAL_US (0x8)
#define US_BIT (0x8000)
#define STD_BIT_MASK (0x7800)
#define STD_BIT_SHIFT (0xb)
#define ARFCN_MASK (0x7ff)
#define EUROPEAN_FREQ_AREA (0x1)
#define AMERICAN_FREQ_AREA (0x2)
#define ALL_FREQ_AREA (0x3)
#define NEXT_AMERICAN_AREA (0x80)
#define LOW_CHANNEL_900 (0x1)
#define HIGH_CHANNEL_900 (0x7c)
#define LOW_CHANNEL_EGSM (0x3cf)
#define HIGH_CHANNEL_EGSM (0x400)
#define CHANNEL_0 (0x0)
#define CHANNEL_0_INTERNAL (0x400)
#define LOW_CHANNEL_1900 (0x200)
#define HIGH_CHANNEL_1900 (0x32a)
#define LOW_CHANNEL_1800 (0x200)
#define HIGH_CHANNEL_1800 (0x375)
#define LOW_CHANNEL_850 (0x80)
#define HIGH_CHANNEL_850 (0xfb)
#define MAX_CARRIERS_GSM900 (0x7c)
#define MAX_CARRIERS_EGSM900 (0xae)
#define MAX_CARRIERS_PCS1900 (0x12b)
#define MAX_CARRIERS_DCS1800 (0x176)
#define MAX_CARRIERS_DUAL (0x1f2)
#define MAX_CARRIERS_DUAL_EGSM (0x224)
#define MAX_CARRIERS_GSM850 (0x7c)
#define MAX_CARRIERS_DUAL_US (0x1a7)
#define MAX_EMO_CHANNELS (0x15)
#define RR_BA_HIGH (0xff)
#define RR_BA_LOW (0x80)
#define ALR_BA_HIGH (0x7f)
#define ALR_BA_LOW (0x0)
#define KC_STRING_SIZE (0x8)
#define MAX_RACH_REQ (0x8)
#define RR_ALR_MEAS_REPORT_SIZE (0x7)
#define LIST_MAX_SIZE (0x80)
#define MAX_REGIONS (0x2)
#define MAX_NUM_BANDS (0x5)
#define LOWER_RXLEV_THRESHOLD (0x4)
#define LOWER_RXLEV_THRESHOLD_850 (0x7)
#define B_GSM_850 (0x0)
#define B_GSM_900 (0x1)
#define B_DCS_1800 (0x2)
#define B_PCS_1900 (0x3)
#define B_E_GSM (0x4)
#define FULL_SEARCH_MODE_ATTEMPTS (0x5)
#define NORMAL_SEARCH_MODE_ATTEMPTS (0x5)
#define TIM_FULL_SEARCH_POWERMEAS_VAL (0xfa0)
#define TIM_NORMAL_SEARCH_POWERMEAS_VAL (0xfa0)
#define MIN_CHANNELS_PER_BAND (0x28)
#define MAX_CHANNELS_PER_BAND (0x3c)
#include "CDG_LEAVE.h"
#endif
