FreeCalypso > hg > fc-magnetite

view cdg-hybrid/sap/8010_134_mmpm_sap.pdf @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_134_mmpm_sap.pdf
;*** Creation       : Wed Mar 11 09:57:48 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_134_mmpm_sap
;*** Document No.   : 8010.134.02.007
;*** Document Date  : 2003-07-29
;*** Document Status: APPROVED
;*** Document Author: CLA
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:27:04 2007"
PRAGMA 	LAST_MODIFIED 	"2003-07-29"
PRAGMA 	ID_AND_VERSION 	"8010.134.02.007"
PRAGMA 	PREFIX 	MMPM 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Enable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines



CONST 	MAX_N_PDU_NUMBER_LIST 	16 	; Maximum Length of Receive N-PDU Number list



VALTAB 	VAL_establish_cause
VAL 	1 	CAUSE_ESTABL_ORIG_CONVERSATIONAL 	"Originating conversational call"
VAL 	2 	CAUSE_ESTABL_ORIG_STREAMING 	"Originating streaming call"
VAL 	3 	CAUSE_ESTABL_ORIG_INTERACTIVE 	"Originating interactive call"
VAL 	4 	CAUSE_ESTABL_ORIG_BACKGROUND 	"Originating background call"
VAL 	5 	CAUSE_ESTABL_ORIG_HIGH_PRIO_SIGNALLING 	"Originating high priority signalling"
VAL 	6 	CAUSE_ESTABL_ORIG_LOW_PRIO_SIGNALLING 	"Originating low priority signalling"

VALTAB 	VAL_reg_state
VAL 	0 	RS_DEREGISTERED 	"GMM context for SMS is removed"
VAL 	1 	RS_REGISTERED 	"GMM context for SMS is built"




VAR 	establish_cause 	"Establish Cause" 	B

VAL 	@p_8010_134_mmpm_sap - VAL_establish_cause@ 	

VAR 	nsapi_set 	"PDP Context Status" 	S


VAR 	receive_n_pdu_number_val 	"Receive N-PDU Number value" 	B


VAR 	reg_state 	"Registration State" 	B

VAL 	@p_8010_134_mmpm_sap - VAL_reg_state@ 	




COMP 	npdu_list 	 "list of received N-PDU numbers"
{
 	EXTERN @p_8010_137_nas_include - nsapi@ 	nsapi 	 ; NSAPI
 	receive_n_pdu_number_val 	 ; Receive N-PDU Number value
}






; MMPM_ATTACH_IND 	0x800B4096
; MMPM_DETACH_IND 	0x80004096
; MMPM_PDP_CONTEXT_STATUS_REQ 	0x80000096
; MMPM_RAT_CHANGE_COMPLETED_IND 	0x80014096
; MMPM_RAT_CHANGE_IND 	0x80024096
; MMPM_REESTABLISH_REQ 	0x80010096
; MMPM_REESTABLISH_CNF 	0x80034096
; MMPM_REESTABLISH_REJ 	0x80044096
; MMPM_REG_STATE_REQ 	0x80020096
; MMPM_REG_STATE_CNF 	0x80054096
; MMPM_ERROR_IND 	0x80064096
; MMPM_RESUME_IND 	0x80074096
; MMPM_SEQUENCE_IND 	0x80084096
; MMPM_SEQUENCE_RES 	0x80030096
; MMPM_SUSPEND_IND 	0x80094096
; MMPM_UNITDATA_IND 	0x800A4096
; MMPM_UNITDATA_REQ 	0x80040096



PRIM 	MMPM_ATTACH_IND 	0x800B4096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Primitive Item
}






PRIM 	MMPM_DETACH_IND 	0x80004096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_PDP_CONTEXT_STATUS_REQ 	0x80000096
{
 	nsapi_set 	 ; PDP Context Status
}






PRIM 	MMPM_RAT_CHANGE_COMPLETED_IND 	0x80014096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Radio Access Technology
}






PRIM 	MMPM_RAT_CHANGE_IND 	0x80024096
{
 	EXTERN @p_8010_152_ps_include - rat@ 	rat 	 ; Radio Access Technology
}






PRIM 	MMPM_REESTABLISH_REQ 	0x80010096
{
 	establish_cause 	 ; Establish Cause
}






PRIM 	MMPM_REESTABLISH_CNF 	0x80034096
{
}






PRIM 	MMPM_REESTABLISH_REJ 	0x80044096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_REG_STATE_REQ 	0x80020096
{
}






PRIM 	MMPM_REG_STATE_CNF 	0x80054096
{
 	reg_state 	 ; Registration State
}






PRIM 	MMPM_ERROR_IND 	0x80064096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_RESUME_IND 	0x80074096
{
}






PRIM 	MMPM_SEQUENCE_IND 	0x80084096
{
 	npdu_list 	[1..MAX_N_PDU_NUMBER_LIST] 	 ; list of received N-PDU numbers
}






PRIM 	MMPM_SEQUENCE_RES 	0x80030096
{
 	npdu_list 	[1..MAX_N_PDU_NUMBER_LIST] 	 ; list of received N-PDU numbers
}






PRIM 	MMPM_SUSPEND_IND 	0x80094096
{
 	EXTERN @p_8010_153_cause_include - ps_cause@ 	ps_cause 	 ; Protocol Stack Cause
}






PRIM 	MMPM_UNITDATA_IND 	0x800A4096
{
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; Service Data Unit
}






PRIM 	MMPM_UNITDATA_REQ 	0x80040096
{
 	EXTERN @p_8010_137_nas_include - org_entity@ 	org_entity 	 ; Originating entity
 	< () 	establish_cause 	> 	 ; Establish Cause
 	< () 	nsapi_set 	> 	 ; PDP Context Status
 	EXTERN @p_8010_152_ps_include - sdu@ 	sdu 	 ; Service Data Unit
}