FreeCalypso > hg > fc-magnetite

view cdg-hybrid/sap/8010_153_cause_include.pdf @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : 8010_153_cause_include.pdf
;*** Creation       : Wed Mar 11 09:57:55 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : 8010_153_cause_include
;*** Document No.   : 8010.153.04.032
;*** Document Date  : 2004-11-30
;*** Document Status: SUBMITTED
;*** Document Author: JOJ
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:29:16 2007"
PRAGMA 	LAST_MODIFIED 	"2004-11-30"
PRAGMA 	ID_AND_VERSION 	"8010.153.04.032"
PRAGMA 	PREFIX 	CAUSE 	; Prefix for this document
PRAGMA 	ALLWAYS_ENUM_IN_VAL_FILE 	YES 	; Enumeration values in value file
PRAGMA 	ENABLE_GROUP 	NO 	; Disable h-file grouping
PRAGMA 	COMPATIBILITY_DEFINES 	NO 	; Compatible to the old #defines






VALTAB 	VAL_cc_cause
VAL 	0x001D 	CC_FACILITY_REJECT 	"facility rejected (originated by MS)"
VAL 	0x0041 	CC_BEARER_NOT_IMPLEM 	"bearer service not implemented (originated by MS)"
VAL 	0x0051 	CC_INVALID_TI 	"invalid transaction identifier value (originated by MS)"
VAL 	0x0058 	CC_INCOMPAT_DEST 	"incompatible destination (originated by MS)"
VAL 	0x0060 	CC_INVALID_MAND_INFO 	"invalid mandatory information (originated by MS)"
VAL 	0x0065 	CC_MESSAGE_INCOMPAT 	"message not compatible with protocol state (originated by MS)"
VAL 	0x0066 	CC_TIMER 	"recovery on timer expiry (originated by MS)"
VAL 	0x0001 	CC_MODIFY_SUCCESS 	"in-call modification successfully performed, MODIFY COMPLETE message received"
VAL 	0x0002 	CC_HOLD_SUCCESS 	"hold successfully performed, HOLD ACKNOWLEDGE message received"
VAL 	0x0003 	CC_RETRIEVE_SUCCESS 	"retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received"
VAL 	0x0004 	CC_DTMF_START_SUCCESS 	"start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received"
VAL 	0x0005 	CC_NO_NET_CAUSE 	"network initiated without cause"
VAL 	0x0006 	CC_SUCCESS 	"operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies"
VAL 	0x0007 	CC_DTMF_NOT_ALLOWED 	"DTMF is currently not allowed (no speech TCH)"
VAL 	0x0008 	CC_DTMF_BUFFER_FULL 	"DTMF storage buffer overflow"
VAL 	0x0009 	CC_DTMF_ABORTED 	"DTMF was aborted (e.g. due to state change)"
VAL 	0x0010 	CC_MAX_NO_CALLS_REACHED 	"maximum number of calls was reached"
VAL 	0x0011 	CC_MAX_NO_RECALLS_REACHED 	"maximum number of recalls (CCBS) was reached"
VAL 	0x0012 	CC_CHANNEL_SYNC 	"channel mode or type information (changed)"
VAL 	0x0013 	CC_REEST_STARTED 	"call re-establishment started"
VAL 	0x0014 	CC_REEST_FINISHED 	"call re-establishment is finished"
VAL 	0x0015 	CC_DTMF_STOP_SUCCESS 	"stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received"
VAL 	0x00FF 	CC_NO_ERROR 	"Equal to NOT_PRESENT_8BIT"

VALTAB 	VAL_nwcc_cause
VAL 	0x0001 	NWCC_UNASSIGN 	"unassigned (unallocated) number"
VAL 	0x0003 	NWCC_NO_ROUTE 	"no route to destination"
VAL 	0x0006 	NWCC_CHAN_UNACCEPT 	"channel unacceptable"
VAL 	0x0008 	NWCC_BARRED 	"operator determined barring"
VAL 	0x0010 	NWCC_CALL_CLEAR 	"normal call clearing"
VAL 	0x0011 	NWCC_USER_BUSY 	"user busy"
VAL 	0x0012 	NWCC_NO_RESPONSE 	"no user responding"
VAL 	0x0013 	NWCC_ALERT_NO_ANSWER 	"user alerting, no answer"
VAL 	0x0015 	NWCC_CALL_REJECT 	"call rejected"
VAL 	0x0016 	NWCC_NUM_CHANGED 	"number changed"
VAL 	0x0019 	NWCC_PREEMPTION 	"pre-emption"
VAL 	0x001A 	NWCC_USER_CLEAR 	"non selected user clearing"
VAL 	0x001B 	NWCC_DEST_ORDER 	"destination out of order"
VAL 	0x001C 	NWCC_NUM_FORMAT 	"invalid number format (incomplete number)"
VAL 	0x001D 	NWCC_FACILITY_REJECT 	"facility rejected"
VAL 	0x001E 	NWCC_STATUS_ENQUIRY 	"response to status enquiry"
VAL 	0x001F 	NWCC_UNSPECIFIED 	"normal, unspecified"
VAL 	0x0022 	NWCC_NO_CHAN_AVAIL 	"no circuit / channel available"
VAL 	0x0026 	NWCC_NETWORK_ORDER 	"network out of order"
VAL 	0x0029 	NWCC_TEMP_FAIL 	"temporary failure"
VAL 	0x002A 	NWCC_SWITCH_CONGEST 	"switching equipment congestion"
VAL 	0x002B 	NWCC_INFO_DISCARD 	"access information discarded"
VAL 	0x002C 	NWCC_REQ_CHAN_UNAVAIL 	"requested circuit / channel not available"
VAL 	0x002F 	NWCC_RESOURCE_UNAVAIL 	"resources unavailable, unspecified"
VAL 	0x0031 	NWCC_QOS_UNAVAIL 	"quality of service unavailable"
VAL 	0x0032 	NWCC_FACILITY_UNSUBSCRIB 	"requested facility not subscribed"
VAL 	0x0037 	NWCC_BARRED_IN_CUG 	"incoming calls barred within the CUG"
VAL 	0x0039 	NWCC_BEARER_CAP_AUTHORIZ 	"bearer capability not authorized"
VAL 	0x003A 	NWCC_BEARER_CAP_UNAVAIL 	"bearer capability not presently available"
VAL 	0x003F 	NWCC_SERVICE_UNAVAIL 	"service or option not available, unspecified"
VAL 	0x0041 	NWCC_BEARER_NOT_IMPLEM 	"bearer service not implemented"
VAL 	0x0044 	NWCC_ACM_MAX 	"ACM equal or greater than ACMmax"
VAL 	0x0045 	NWCC_FACILITY_NOT_IMPLEM 	"requested facility not implemented"
VAL 	0x0046 	NWCC_RESTICT_BEARER_CAP 	"only restricted digital information bearer capability is available"
VAL 	0x004F 	NWCC_SERVICE_NOT_IMPLEM 	"service or option not implemented, unspecified"
VAL 	0x0051 	NWCC_INVALID_TI 	"invalid transaction identifier value"
VAL 	0x0057 	NWCC_USER_NOT_IN_CUG 	"user not member of CUG"
VAL 	0x0058 	NWCC_INCOMPAT_DEST 	"incompatible destination"
VAL 	0x005B 	NWCC_INVALID_TRANS_NET 	"invalid transit network selection"
VAL 	0x005F 	NWCC_INCORRECT_MESSAGE 	"semantically incorrect message"
VAL 	0x0060 	NWCC_INVALID_MAND_INFO 	"invalid mandatory information"
VAL 	0x0061 	NWCC_MESSAGE_TYPE_NOT_IMPLEM 	"message type non-existent or not implemented"
VAL 	0x0062 	NWCC_MESSAGE_TYPE_INCOMPAT 	"message type not compatible with protocol state"
VAL 	0x0063 	NWCC_INFO_ELEM_NOT_IMPLEM 	"information element non-existent or not implemented"
VAL 	0x0064 	NWCC_COND_INFO_ELEM 	"conditional information element error"
VAL 	0x0065 	NWCC_MESSAGE_INCOMPAT 	"message not compatible with protocol state"
VAL 	0x0066 	NWCC_TIMER 	"recovery on timer expiry"
VAL 	0x006F 	NWCC_PROTOCOL 	"protocol error, unspecified"
VAL 	0x007F 	NWCC_INTERWORKING 	"interworking, unspecified"
VAL 	0x00FF 	NWCC_NO_NET_CAUSE 	"Network initiated without cause"

VALTAB 	VAL_dl_cause
VAL 	0x0000 	DL_INFO_FIELD_MISMATCH 	"Different information fields"
VAL 	0x00FF 	DL_NO_ERROR 	"Equal to NOT_PRESENT_8BIT"

VALTAB 	VAL_l2r_cause
VAL 	0x0001 	L2R_ERR_INTERNAL 	"L2R internal error"

VALTAB 	VAL_llc_cause
VAL 	0x0000 	LLC_NORMAL_REL 	"Normal release"
VAL 	0x0001 	LLC_INVALID_XID 	"Invalid XID response"
VAL 	0x0002 	LLC_DM_RECEIVED 	"DM received"
VAL 	0x0003 	LLC_NO_PEER_RES 	"No peer response"
VAL 	0x0004 	LLC_INVALID_UA 	"Invalid UA response"
VAL 	0x0005 	LLC_SABM_INVALID_XID 	"Invalid XID response during connection establishment"
VAL 	0x0006 	LLC_SABM_NO_PEER_RES 	"No peer response during connection establishment"
VAL 	0x0007 	LLC_XID_INVALID_XID 	"Invalid XID response during parameter negotiation"
VAL 	0x0008 	LLC_XID_NO_PEER_RES 	"No peer response during parameter negotiation"
VAL 	0x0009 	LLC_DISC_NO_PEER_RES 	"No peer response during release of connection"
VAL 	0x000A 	LLC_MULT_ASS_TLLI 	"Possible multiple assignment of a TLLI value"
VAL 	0x000B 	LLC_DM1_RECEIVED 	"Unsolicited DM response with F bit 1 in state ABM"
VAL 	0x000C 	LLC_DM1_RECEIVED_REEST 	"Unsolicited DM response with F bit 1 in state Timer Recovery; re-establishment procedure initiated"
VAL 	0x000D 	LLC_ACK_NO_PEER_RES_REEST 	"No peer response during waiting for acknowledgement; re-establishment procedure initiated"
VAL 	0x000E 	LLC_PEER_BUSY_REEST 	"Peer receiver busy condition; re-establishment procedure initiated"
VAL 	0x000F 	LLC_FRMR_COND 	"Frame rejection condition; frame discarded"
VAL 	0x0010 	LLC_FRMR_COND_REEST 	"Frame rejection condition; re-establishment procedure initiated"
VAL 	0x0011 	LLC_FRMR_RECEIVED 	"FRMR response received; frame discarded"
VAL 	0x0012 	LLC_L3_REEST 	"Layer 3 initiated re-establishment procedure"
VAL 	0x0013 	LLC_PEER_REEST 	"Peer initiated re-establishment procedure"
VAL 	0x0014 	LLC_DM0_RECEIVED_REEST 	"Unsolicited DM response with F bit 0; re-establishment procedure initiated"

VALTAB 	VAL_mm_cause
VAL 	0x0000 	MM_SUCCESS 	"No error, successful operation (MM)"
VAL 	0x0080 	MM_NO_REGISTRATION 	"MS is not registered"
VAL 	0x0081 	MM_TIMER_RECOVERY 	"Time-out in MM during establishment"
VAL 	0x0082 	MM_NO_REESTABLISH 	"Cell does not support call reestablish"
VAL 	0x0083 	MM_INT_PREEM 	"Preemptive release, e.g. MO/MT clash in MM"
VAL 	0x0084 	MM_PLMN_NOT_IDLE_MODE 	"Reject (not in idle mode)"
VAL 	0x0088 	MM_AUTHENTICATION_REJECTED 	"Authentication failure"
VAL 	0x0089 	MM_SIM_REMOVED 	"SIM card removed"
VAL 	0x008A 	MM_POWER_OFF 	"UE Power Off"
VAL 	0x008B 	MM_NO_SERVICE 	"No service"
VAL 	0x008C 	MM_LIMITED_SERVICE 	"Only limited service available"
VAL 	0x0090 	MM_PROTOCOL_ERROR 	"Protocol error, unspecified"
VAL 	0x0091 	MM_DEDICATED_MODE 	"PS service suspended while in dedicated mode"
VAL 	0x0092 	MM_TRY_TO_UPDATE 	"MM is attempting to update registration"
VAL 	0x0093 	MM_SOFT_OFF 	"Disabled RF RX/TX mode"
VAL 	0x00A0 	MM_DETACH_WITH_REATTACH 	"Detach with reattach required"
VAL 	0x00FF 	MM_NO_ERROR 	"NO ERROR CAUSE"

VALTAB 	VAL_nwmm_cause
VAL 	2 	NWMM_IMSI_UNKNOWN_IN_HLR 	"IMSI unknown in HLR"
VAL 	3 	NWMM_ILLEGAL_MS 	"Illegal MS"
VAL 	4 	NWMM_IMSI_UNKNOWN_IN_VLR 	"IMSI unknown in VLR"
VAL 	5 	NWMM_IMEI_NOT_ACCEPTED 	"IMEI not accepted"
VAL 	6 	NWMM_ILLEGAL_ME 	"Illegal ME"
VAL 	7 	NWMM_GPRS_NOT_ALLOWED 	"GPRS services not allowed"
VAL 	8 	NWMM_GSM_GPRS_NOT_ALLOWED 	"GPRS services and non-GPRS services not allowed"
VAL 	9 	NWMM_NO_MS_ID 	"MS identity cannot be derived by the network"
VAL 	10 	NWMM_IMPLICIT_DETACHED 	"Implicitly detached"
VAL 	11 	NWMM_PLMN_NOT_ALLOWED 	"PLMN not allowed"
VAL 	12 	NWMM_LA_NOT_ALLOWED 	"Location Area not allowed"
VAL 	13 	NWMM_ROAMING_NOT_ALLOWED 	"Roaming not allowed in this location area"
VAL 	14 	NWMM_GPRS_NOT_ALLOWED_IN_PLMN 	"GPRS service not allowed in this PLMN"
VAL 	15 	NWMM_NO_SUITABLE_CELL_IN_LA 	"Find another allowed location area in the same PLMN"
VAL 	16 	NWMM_MSC_TEMP_NOT_REACHABLE 	"MSC temporarily not reachable"
VAL 	17 	NWMM_NETWORK_FAILURE 	"Network failure"
VAL 	20 	NWMM_MAC_FAILURE 	"MAC failure"
VAL 	21 	NWMM_SYNCH_FAILURE 	"Synch failure"
VAL 	22 	NWMM_CONGESTION 	"Congestion"
VAL 	23 	NWMM_GSM_AUTH_UNACCEPTABLE 	"No AUTN IE present when MS supports the UMTS authentication algorithm"
VAL 	32 	NWMM_SERVICE_NOT_SUPPORTED 	"MS requests a service/facility which is not sup-ported by the PLMN."
VAL 	33 	NWMM_SERVICE_NOT_SUBSCRIBED 	"Requested service option not subscribed"
VAL 	34 	NWMM_SERVICE_OUT_OF_ORDER 	"Service option temporary out of order in the MSC"
VAL 	38 	NWMM_CALL_NOT_IDENTIFIED 	"Call is not identified"
VAL 	40 	NWMM_NO_PDP_CONTEXT_ACTIVATED 	"No PDP context activated"
VAL 	95 	NWMM_SEMANTIC_INCORRECT_MSG 	"Semantically incorrect message"
VAL 	96 	NWMM_INVALID_M_INFO 	"Invalid mandatory information"
VAL 	97 	NWMM_MSG_TYPE_NOT_IMPLEMENTED 	"Message type non-existent or not implemented"
VAL 	98 	NWMM_MSG_TYPE_INCOMPATIBLE_WITH_STATE 	"Message type not compatible with the protocol state"
VAL 	99 	NWMM_IE_NOT_IMPLEMENTED 	"Information element non-existent or not implemented"
VAL 	100 	NWMM_CONDITIONAL_IE_ERROR 	"Conditional IE error"
VAL 	101 	NWMM_MSG_INCOMPATIBLE_WITH_STATE 	"Message not compatible with the protocol state"
VAL 	111 	NWMM_PROTOCOL_ERROR_UNSPECIFIED 	"Unspecified protocol error"

VALTAB 	VAL_ppp_cause
VAL 	0x0001 	PPP_TERM_OK_MMI 	"successful terminated (MMI initiated)"
VAL 	0x0002 	PPP_TERM_OK_PEER 	"successful terminated (PPP peer initiated)"
VAL 	0x0003 	PPP_TERM_NO_RESPONSE 	"no response from the PPP peer"
VAL 	0x0004 	PPP_TERM_LOOP_BACK 	"looped-back link detected"
VAL 	0x0005 	PPP_TERM_LCP_NOT_CONVERGE 	"LCP configuration is not converging"
VAL 	0x0006 	PPP_TERM_IPCP_NOT_CONVERGE 	"IPCP configuration is not converging"
VAL 	0x0007 	PPP_TERM_IPCP_NOT_STARTED 	"PPP peer did not start IPCP configuration"
VAL 	0x0008 	PPP_TERM_NO_CHANNEL 	"can not open communication channels"
VAL 	0x0009 	PPP_TERM_PROT_REJ_UNEXPECTED 	"unexpected Protocol Rejection from PPP peer"
VAL 	0x000A 	PPP_TERM_USE_AUTHED_FAILED 	"user authentication failed"
VAL 	0x000B 	PPP_TERM_PROT_ERROR_UNSPEC 	"unspecified protocol error"

VALTAB 	VAL_rcm_cause
VAL 	0x0000 	RCM_OK 	"Operation or configuration completed successfully."
VAL 	0x0010 	RCM_ABORT_NW_NOT_FOUND 	"Indicates that the selected network was not found."
VAL 	0x0011 	RCM_ABORT_NO_NW_FOUND 	"Indicates that no network was found."
VAL 	0x0012 	RCM_ABORT_NO_NW_SEARCHING 	"Indicates that RCM has no candidates for cell reselection and cell reselection measurements are started on all neighbour cells."
VAL 	0x0020 	RCM_ERROR_NO_CELL_SELECTED 	"RCM has failed to reactivate as requested and is no longer camped on a cell."
VAL 	0x0021 	RCM_ERROR_PREVIOUS_CELL_SELECTED 	"RCM failed to reactivate as requested but the previously selected cell remains valid."
VAL 	0x0030 	RCM_MEAS_SETUP_INCOMPLETE_CONFIG 	"A received measurement configuration is incomplete."
VAL 	0x0031 	RCM_MEAS_SETUP_INVALID_CONFIG 	"A received measurement configuration is invalid."
VAL 	0x0032 	RCM_MEAS_SETUP_UNSUPPORTED_MEAS 	"A received measurement type is not supported."
VAL 	0x1000 	RCM_IRAT_CR_TARGET_BARRED 	"Inter RAT cell reselection target cell is barred."
VAL 	0x1001 	RCM_IRAT_CR_TARGET_RESERVED 	"Inter RAT cell reselection target cell is reserved for operator use, and UE does not fulfil access requirements."
VAL 	0x1002 	RCM_IRAT_CR_TARGET_NOT_FOUND 	"Inter RAT cell reselection target cell was not found."
VAL 	0x1003 	RCM_IRAT_CR_FAILURE_UNSPECIFIED 	"Inter RAT cell reselection failed without specification of failure cause."

VALTAB 	VAL_rr_cause
VAL 	0x0000 	RR_OK 	"Operation or configuration completed successfully."
VAL 	0x0020 	RR_NW_SCAN_REJECTED_CONNECTION_STATE 	"A network scan could not be carried out due to the current connection state of RR."
VAL 	0x0030 	RR_SYNC_RESOURCE_ASSIGNED 	"Traffic channel resource assigned"
VAL 	0x0031 	RR_SYNC_CHANNEL_MODE_MODIFIED 	"Channel mode modified"
VAL 	0x0032 	RR_SYNC_DRX_CYCLE_LENGTH_UPDATED 	"The DRX cycle length has been modified"
VAL 	0x0040 	RR_RADIO_LINK_FAILURE 	"Radio link failure occurred"
VAL 	0x0041 	RR_DATA_LINK_FAILURE 	"Data link failure occurred"
VAL 	0x0042 	RR_RANDOM_ACCESS_FAILURE 	"Random access failed"
VAL 	0x0043 	RR_DL_ESTABLISHMENT_FAILURE 	"DL establishment failure"
VAL 	0x0044 	RR_ESTABLISH_REJECT 	"Rejecting establishment due to wrong state in RR"
VAL 	0x0050 	RR_RELEASE_ABNORMAL_UNSPECIFIED 	"Abnormal release, unspecified"
VAL 	0x0051 	RR_RELEASE_INTERNAL_UNSPECIFIED 	"Internal release, unspecified"
VAL 	0x0060 	RR_ACCESS_BARRED 	"Access barred because of access class control"
VAL 	0x0061 	RR_T3122_RUNNING 	"T3122 running, emergency calls only until expiry"
VAL 	0x0062 	RR_ACCESS_DELAYED 	"Access delayed because of immediate assignment reject and followed by timeout"
VAL 	0x1000 	RR_IRAT_CR_FAILURE_UNSPECIFIED 	"Indicates that reselection to the specified target cell was not successful."
VAL 	0x1010 	RR_IRAT_HO_MESSAGE_FAILURE 	"Indicates that a check of a handover message to GSM failed."
VAL 	0x1020 	RR_IRAT_HO_FAILURE_UNSPECIFIED 	"Inter RAT handover failed without specification of failure cause."
VAL 	0x1021 	RR_IRAT_HO_ARFCN_NOT_SUPPORTED 	"Inter RAT handover failed because the frequency of the target cell was not supported."
VAL 	0x1030 	RR_IRAT_CC_FAILURE_UNSPECIFIED 	"Inter RAT cell change from UMTS to GSM failed without a specific cause."

VALTAB 	VAL_nwrr_cause
VAL 	0x0000 	NWRR_RELEASE_NORMAL_EVENT 	"RR connection released normally"
VAL 	0x0001 	NWRR_RELEASE_UNSPECIFIED 	"RR connection released for unspecified reason"
VAL 	0x0002 	NWRR_RELEASE_CH_UNACCEPTABLE 	"RR connection released due to unacceptable channel"
VAL 	0x0003 	NWRR_RELEASE_TIMER_EXPIRED 	"RR connection released due to timer expirery"
VAL 	0x0004 	NWRR_RELEASE_NO_RADIO_ACTIVITY 	"RR connection released due to no activity on the radio path"
VAL 	0x0005 	NWRR_RELEASE_PREEMPTIVE 	"RR connection released pre-emptively"
VAL 	0x0006 	NWRR_UTRAN_CONF_UNKNOWN 	"UTRAN configuration unknown"
VAL 	0x0008 	NWRR_HANDOVER_IMPOSSIBLE 	"Handover impossible, timing advance out of range"
VAL 	0x0009 	NWRR_CH_MODE_UNACCEPTABLE 	"Channel mode unacceptable"
VAL 	0x000A 	NWRR_FREQ_NOT_IMPLEMENTED 	"Frequency not implemented"
VAL 	0x000C 	NWRR_LOWER_LAYER_FAILURE 	"Lower layer failure"
VAL 	0x0041 	NWRR_CALL_ALREADY_CLEARED 	"Call already cleared"
VAL 	0x005F 	NWRR_INCORRECT_MESSAGE 	"Semantically incorrect message"
VAL 	0x0060 	NWRR_INVALID_MANDATORY_INFO 	"Invalid mandatory information"
VAL 	0x0061 	NWRR_MESS_NOT_IMPLEMENTED 	"Message type non-existent or not implemented"
VAL 	0x0062 	NWRR_MESS_NOT_COMPATIBLE 	"Message type not compatible with protocol state"
VAL 	0x0064 	NWRR_CONDITIONAL_IE_ERROR 	"Conditional IE error"
VAL 	0x0065 	NWRR_NO_CELL_ALLOCATION 	"No cell allocation available"
VAL 	0x006F 	NWRR_PROTOCOL_ERROR_UNSPECIFIED 	"Protocol error unspecified"

VALTAB 	VAL_rlp_cause
VAL 	0x0000 	ERR_BASE 	"RLP base error number"
VAL 	0x0000 	ERR_PF_RETRANS 	"Max Retransmissions of Poll reached"
VAL 	0x0001 	ERR_XID_RETRANS 	"Max Retransmissions of XID reached"
VAL 	0x0002 	ERR_SABM_RETRANS 	"Max Retransmissions of SABM reached"
VAL 	0x0003 	ERR_DISC_RETRANS 	"Max Retransmissions of DISC reached"
VAL 	0x0004 	ERR_REMAP_RETRANS 	"Max Retransmissions of REMAP reached"
VAL 	0x0010 	ERR_SDU_TO_SMALL 	"Received SDU is to small"
VAL 	0x0020 	ERR_INTERNAL 	"Internal error"

VALTAB 	VAL_rrc_cause
VAL 	0x0000 	RRC_OK 	"Operation or configuration completed successfully."
VAL 	0x0001 	RRC_ABORT_UNSPECIFIED 	"Abort for unspecified reason"
VAL 	0x0010 	RRC_PHY_CAPABILITY_CHECK_FAILURE 	"Indicates that a check of PHY capabilities against requirements for a requested cell selection has failed causing RRC to refuse to start cell selection."
VAL 	0x0020 	RRC_NW_SCAN_REJECTED_CONNECTION_STATE 	"A network scan could not be carried out due to the current connection state of RRC."
VAL 	0x0030 	RRC_SYNC_RESOURCE_ASSIGNED 	"Traffic channel resource assigned"
VAL 	0x0031 	RRC_SYNC_CHANNEL_MODE_MODIFIED 	"Channel mode modified"
VAL 	0x0032 	RRC_SYNC_DRX_CYCLE_LENGTH_UPDATED 	"The DRX cycle length has been modified"
VAL 	0x0040 	RRC_START_UPDATE_IDLE_MODE_ENTERED 	"Update of START values on entering idle mode"
VAL 	0x0041 	RRC_START_UPDATE_THRESHOLD_REACHED 	"Update of START values because threshold has been reached."
VAL 	0x0042 	RRC_START_UPDATE_CONNECTION_ESTABLISHED 	"Update of START values on connection establishment."
VAL 	0x1000 	RRC_IRAT_HO_MESSAGE_FAILURE 	"Indicates that a check of a handover message to UTRAN failed."
VAL 	0x1020 	RRC_IRAT_HO_FAILURE_UNSPECIFIED 	"Inter RAT handover failed without specification of failure cause."
VAL 	0x1030 	RRC_IRAT_CC_FAILURE_UNSPECIFIED 	"Inter RAT cell change from GSM to UMTS failed without a specific cause."

VALTAB 	VAL_nwrrc_cause
VAL 	0x0000 	NWRRC_PAGING_MT_CONVERSATION 	"Mobile terminated conversational call"
VAL 	0x0001 	NWRRC_PAGING_MT_STREAM 	"Mobile terminated streaming call"
VAL 	0x0002 	NWRRC_PAGING_MT_INTERACTIVE 	"Mobile terminated interactive call"
VAL 	0x0003 	NWRRC_PAGING_MT_BACKGROUND 	"Mobile terminated background call"
VAL 	0x0004 	NWRRC_PAGING_MT_HIGH_PRIO_SIGNAL 	"Mobile terminated high priority signalling"
VAL 	0x0005 	NWRRC_PAGING_MT_LOW_PRIO_SIGNAL 	"Mobile terminated low priority signalling"
VAL 	0x0006 	NWRRC_PAGING_MT_UNKNOWN 	"Mobile terminated call - unknown cause"
VAL 	0x0010 	NWRRC_RELEASE_NORMAL_EVENT 	"RRC connection released normally"
VAL 	0x0011 	NWRRC_RELEASE_UNSPECIFIED 	"RRC connection released for unspecified reason"
VAL 	0x0012 	NWRRC_RELEASE_PREEMPTIVE 	"RRC connection released pre-emptively"
VAL 	0x0013 	NWRRC_RELEASE_CONGESTION 	"RRC connection released due to congestion"
VAL 	0x0014 	NWRRC_RELEASE_REESTABLISH_REJECT 	"RRC connection released due to rejection of connection reestablishment"
VAL 	0x0015 	NWRRC_RELEASE_DIR_SIGNAL_REESTAB 	"RRC connection released due to directed signalling reestablishment"
VAL 	0x0016 	NWRRC_RELEASE_USER_INACTIVITY 	"RRC connection released due to user inactivity"

VALTAB 	VAL_sim_cause
VAL 	0x00FF 	SIM_NO_ERROR 	"No error (Status Code 9000, 91XX, 9FXX, 920X; USIM 63CX)"
VAL 	0x0001 	SIM_NO_SELECT 	"No EF selected (SC 9400; USIM 6986)"
VAL 	0x0002 	SIM_UNKN_FILE_ID 	"file id not found (SC 9404; USIM 6A82)"
VAL 	0x0003 	SIM_EF_INVALID 	"EF invalidated (SC 9810; USIM 6283, 6984)"
VAL 	0x0004 	SIM_ADDR_WRONG 	"Address of data invalid (SC 9402; USIM 6A83)"
VAL 	0x0005 	SIM_CMD_INCONSIST 	"Command inconsistent with file type (SC 9408; USIM 6981)"
VAL 	0x0006 	SIM_MAX_INCREASE 	"Increase: maximum reached (SC 9850)"
VAL 	0x0007 	SIM_CLA_WRONG 	"Wrong class parameter (SC 6EXX)"
VAL 	0x0008 	SIM_INS_WRONG 	"Unknown instruction code (SC 6DXX; USIM 6A81)"
VAL 	0x0009 	SIM_P1P2_WRONG 	"Incorrect parameter P1, P2 (SC 6BXX; USIM 6A86. 6A88)"
VAL 	0x000A 	SIM_P3_WRONG 	"Incorrect parameter P3 (SC 67XX; USIM 6282, 6A87)"
VAL 	0x000B 	SIM_CHV_NOTSET 	"No CHV active (SC 9802; USIM 6982)"
VAL 	0x000C 	SIM_CHV_VALIDATED 	"CHV already validated (SC 9808; USIM 6982)"
VAL 	0x000D 	SIM_ACCESS_PROHIBIT 	"Access conditions not fulfilled (SC 9804; USIM 6985)"
VAL 	0x000E 	SIM_OTHER_ERROR 	"Any other SIM error"
VAL 	0x000F 	SIM_PUK1_BLOCKED 	"PUK1 blocked (SC 9840; USIM 63C0)"
VAL 	0x0010 	SIM_PUK1_REMAIN1 	"Wrong PUK1, 1 attempt left (SC 9804; USIM 63C1)"
VAL 	0x0011 	SIM_PUK1_REMAIN2 	"Wrong PUK1, 2 attempts left (USIM 63C2)"
VAL 	0x0012 	SIM_PUK1_REMAIN3 	"Wrong PUK1, 3 attempts left (USIM 63C3)"
VAL 	0x0013 	SIM_PUK1_REMAIN4 	"Wrong PUK1, 4 attempts left (USIM 63C4)"
VAL 	0x0014 	SIM_PUK1_REMAIN5 	"Wrong PUK1, 5 attempts left (USIM 63C5)"
VAL 	0x0015 	SIM_PUK1_REMAIN6 	"Wrong PUK1, 6 attempts left (USIM 63C6)"
VAL 	0x0016 	SIM_PUK1_REMAIN7 	"Wrong PUK1, 7 attempts left (USIM 63C7)"
VAL 	0x0017 	SIM_PUK1_REMAIN8 	"Wrong PUK1, 8 attempts left (USIM 63C8)"
VAL 	0x0018 	SIM_PUK1_REMAIN9 	"Wrong PUK1, 9 attempts left (USIM 63C9)"
VAL 	0x0019 	SIM_PUK1_EXPECT 	"PUK1 required (SC 9804, 9808; USIM 6982, 6985)"
VAL 	0x001A 	SIM_PIN1_BLOCKED 	"PIN1 blocked (SC 9840; USIM 63C0, 6983)"
VAL 	0x001B 	SIM_PIN1_REMAIN1 	"Wrong PIN1, 1 attempt left (USIM 63C1)"
VAL 	0x001C 	SIM_PIN1_REMAIN2 	"Wrong PIN1, 2 attempts left (USIM 63C2)"
VAL 	0x001D 	SIM_PIN1_EXPECT 	"PIN1 required (SC 9804, 9808; USIM 6982, 6985)"
VAL 	0x001E 	SIM_PUK2_BLOCKED 	"PUK2 blocked (SC 9840; USIM 63C0)"
VAL 	0x001F 	SIM_PUK2_REMAIN1 	"Wrong PUK2, 1 attempt left (USIM 63C1)"
VAL 	0x0020 	SIM_PUK2_REMAIN2 	"Wrong PUK2, 2 attempts left (USIM 63C2)"
VAL 	0x0021 	SIM_PUK2_REMAIN3 	"Wrong PUK2, 3 attempts left (USIM 63C3)"
VAL 	0x0022 	SIM_PUK2_REMAIN4 	"Wrong PUK2, 4 attempts left (USIM 63C4)"
VAL 	0x0023 	SIM_PUK2_REMAIN5 	"Wrong PUK2, 5 attempts left (USIM 63C5)"
VAL 	0x0024 	SIM_PUK2_REMAIN6 	"Wrong PUK2, 6 attempts left (USIM 63C6)"
VAL 	0x0025 	SIM_PUK2_REMAIN7 	"Wrong PUK2, 7 attempts left (USIM 63C7)"
VAL 	0x0026 	SIM_PUK2_REMAIN8 	"Wrong PUK2, 8 attempts left (USIM 63C8)"
VAL 	0x0027 	SIM_PUK2_REMAIN9 	"Wrong PUK2, 9 attempts left (USIM 63C9)"
VAL 	0x0028 	SIM_PUK2_EXPECT 	"PUK2 required (SC 9804, 9808; USIM 6982, 6985)"
VAL 	0x0029 	SIM_PIN2_BLOCKED 	"PIN2 blocked (SC 9840; USIM 63C0, 6983)"
VAL 	0x002A 	SIM_PIN2_REMAIN1 	"Wrong PIN2, 1 attempt left (USIM 63C1)"
VAL 	0x002B 	SIM_PIN2_REMAIN2 	"Wrong PIN2, 2 attempts left (USIM 63C2)"
VAL 	0x002C 	SIM_PIN2_EXPECT 	"PIN1 required (SC 9804, 9808; USIM 6982, 6985)"
VAL 	0x002D 	SIM_SAT_BUSY 	"SIM Application Toolkit busy (SC 9300)"
VAL 	0x002E 	SIM_DNL_ERROR 	"SAT download error (SC 9EXX; USIM 62XX, 63XX)"
VAL 	0x002F 	SIM_CARD_REMOVED 	"SIM card removed or exchanged"
VAL 	0x0030 	SIM_PARAM_WRONG 	"Wrong parameter in primitive"
VAL 	0x0031 	SIM_DRV_NOCARD 	"SIM driver error: no card detected"
VAL 	0x0032 	SIM_DRV_NOINT 	"SIM driver error: no interrupt"
VAL 	0x0033 	SIM_DRV_NOATR 	"SIM driver error: no answer to reset"
VAL 	0x0034 	SIM_DRV_READ 	"SIM driver error: invalid response"
VAL 	0x0035 	SIM_DRV_XMIT 	"SIM driver error: unsuccessful transmission"
VAL 	0x0036 	SIM_DRV_OVF 	"SIM driver error: interrupt overflow"
VAL 	0x0037 	SIM_DRV_LEN 	"SIM driver error: incorrect size of response"
VAL 	0x0038 	SIM_DRV_CARDREJ 	"SIM driver error: card rejected (invalid properties)"
VAL 	0x0039 	SIM_DRV_WAIT 	"SIM driver error: timeout"
VAL 	0x003A 	SIM_DRV_ABNCASE1 	"SIM driver error: abnormal case 1"
VAL 	0x003B 	SIM_DRV_ABNCASE2 	"SIM driver error: abnormal case 2"
VAL 	0x003C 	SIM_DRV_RCVOVFL 	"SIM driver error: more than 256 bytes received"
VAL 	0x003F 	SIM_DRV_TEMPFAIL 	"SIM driver error: temprary failure, SIM reset required"
VAL 	0x0040 	SIM_UMTS_AUTH_SQN_ERROR 	"UMTS authentication failed due to Sequence Number error (erroneous AUTN)"
VAL 	0x0041 	SIM_UMTS_AUTH_MAC_ERROR 	"UMTS authentication failed due to MAC error (erroneous AUTN)"

VALTAB 	VAL_sm_cause
VAL 	0x0001 	SM_MODIFY_COLLISION 	"Collision between MO and MT modify. MT wins."
VAL 	0x0002 	SM_INVALID_NSAPI 	"Attempted procedure on non-existing context/NSAPI"
VAL 	0x0003 	SM_R99_PROCEDURE_REJECTED_IN_R97 	"R99 Procedure rejected: Currently active in R97 network"
VAL 	0x0004 	SM_PRE_R99_NETWORK_ENTERED 	"Context deactivation due to entering pre-R99 network"
VAL 	0x0005 	SM_ACTIVATION_OVERRIDE 	"Context deactivation due to activation override"

VALTAB 	VAL_nwsm_cause
VAL 	0x0019 	NWSM_LLC_OR_SNDCP_FAILURE 	"LLC or SNDCP failure"
VAL 	0x001A 	NWSM_INSUFFICIENT_RESOURCES 	"Insufficient resources"
VAL 	0x001B 	NWSM_MISSING_OR_UNKNOWN_APN 	"Missing or unknown APN"
VAL 	0x001C 	NWSM_UNKNOWN_PDP_ADDR_OR_TYPE 	"Unknown PDP address or PDP type"
VAL 	0x001D 	NWSM_USER_AUTH_FAILED 	"User Aauthentication failed"
VAL 	0x001E 	NWSM_ACTIVATE_REJECTED_BY_GGSN 	"Activation rejected by GGSN"
VAL 	0x001F 	NWSM_ACTIVATE_REJECTED_UNSPECIFIED 	"Activation rejected, unspecified"
VAL 	0x0020 	NWSM_SERVICE_NOT_SUPPORTED 	"Service option not supported"
VAL 	0x0021 	NWSM_SERVICE_NOT_SUBSCRIBED 	"Requested service option not subscribed"
VAL 	0x0022 	NWSM_SERVICE_TEMP_OUT_OF_ORDER 	"Service option temporarily out of order"
VAL 	0x0023 	NWSM_NSAPI_IN_USE 	"NSAPI already used (pre-R99 only)"
VAL 	0x0024 	NWSM_REGULAR_DEACTIVATION 	"Regular deactivation"
VAL 	0x0025 	NWSM_QOS_NOT_ACCEPTED 	"QoS not accepted"
VAL 	0x0026 	NWSM_NETWORK_FAILURE 	"Network failure"
VAL 	0x0027 	NWSM_REACTIVATION_REQUESTED 	"Reactivation requested"
VAL 	0x0028 	NWSM_FEATURE_NOT_SUPPORTED 	"Feature not supported (context activation)"
VAL 	0x0029 	NWSM_SEMANTIC_TFT_ERROR 	"Semantic error in TFT operation"
VAL 	0x002A 	NWSM_SYNTACTIC_TFT_ERROR 	"Syntactical error in TFT operation"
VAL 	0x002B 	NWSM_UNKNOWN_LINKED_TI 	"Unknown PDP context (identified by linked TI)"
VAL 	0x002C 	NWSM_SEMANTIC_TFT_FILTER_ERROR 	"Semantic error in packet filter"
VAL 	0x002D 	NWSM_SYNTACTIC_TFT_FILTER_ERROR 	"Syntactical error in packet filter"
VAL 	0x002E 	NWSM_CONTEXT_NEEDS_TFT 	"PDP context without TFT already activated"
VAL 	0x0051 	NWSM_INVALID_TI 	"Invalid transaction identifier value"
VAL 	0x005F 	NWSM_SEMANTIC_ERROR_IN_MSG 	"Semantically incorrect message"
VAL 	0x0060 	NWSM_INVALID_MANDATORY_ELEMENT 	"Invalid mandatory information"
VAL 	0x0061 	NWSM_MSG_TYPE_NOT_IMPLEMENTED 	"Message type non-existent or not implemented"
VAL 	0x0062 	NWSM_MSG_TYPE_INCOMPATIBLE_WITH_STATE 	"Message type not compatible with the protocol state"
VAL 	0x0063 	NWSM_IE_NOT_IMPLEMENTED 	"Information element non-existent or not implemented"
VAL 	0x0064 	NWSM_CONDITIONAL_IE_ERROR 	"Conditional IE error"
VAL 	0x0065 	NWSM_MSG_INCOMPATIBLE_WITH_STATE 	"Message not compatible with the protocol state"
VAL 	0x006F 	NWSM_PROTOCOL_ERROR_UNSPECIFIED 	"Unspecified protocol error"

VALTAB 	VAL_sms_cause
VAL 	0b1000100111111111 	SMS_NO_ERROR 	"No error"
VAL 	0b1100100100000000 	SMS_PARAM_WRONG 	"Wrong parameter in primitive"
VAL 	0b1100100100000001 	SMS_ENTITY_BUSY 	"Entity is busy"
VAL 	0b1100100100000010 	SMS_OPER_NOT_ALLW 	"Operation not allowed"
VAL 	0b1100100100000011 	SMS_OPER_NOT_SUPP 	"Operation not supported"
VAL 	0b1100100100000100 	SMS_SIM_BUSY 	"SIM busy"
VAL 	0b1100100100000101 	SMS_MEM_FAIL 	"Memory failure"
VAL 	0b1100100100000110 	SMS_INV_INDEX 	"Invalid memory index"
VAL 	0b1100100100001000 	SMS_MEM_FULL 	"Memory full"
VAL 	0b1100100100001001 	SMS_NO_SERVICE 	"No network service"
VAL 	0b1100100100001010 	SMS_NET_TIMEOUT 	"Network timeout"
VAL 	0b1100100100001011 	SMS_UNEXP_CNMA 	"No +CNMA acknowledgement expected"
VAL 	0b1100100100001111 	SMS_OTHER_ERROR 	"Any other error"

VALTAB 	VAL_nwsms_cp_cause
VAL 	0x0011 	NWSMS_CP_NETWORK_FAILURE 	"Network Failure"
VAL 	0x0016 	NWSMS_CP_CONGESTION 	"Congestion"
VAL 	0x0051 	NWSMS_CP_INVALID_TI 	"Invalid Transaction Identifier"
VAL 	0x005F 	NWSMS_CP_SEM_INC_MSG 	"Semantically incorrect message"
VAL 	0x0060 	NWSMS_CP_INV_MAND_INFO 	"Invalid mandatory information"
VAL 	0x0061 	NWSMS_CP_MSG_TYPE_NON_EXIST 	"Message type non-existent or not implemented"
VAL 	0x0062 	NWSMS_CP_MSG_NOT_COMP 	"Message not compatible with the short message protocol state"
VAL 	0x0063 	NWSMS_CP_INFO_NON_EXIST 	"Information element non-existent or not implemented"
VAL 	0x006F 	NWSMS_CP_PROTOCOL_ERROR 	"Protocol error, unspecified"

VALTAB 	VAL_nwsms_rp_cause
VAL 	0x0001 	NWSMS_RP_UNASSIGNED_NUMBER 	"Unassigned (unallocated) number"
VAL 	0x0008 	NWSMS_RP_OPERATOR_DET_BARRED 	"Operator determined barring"
VAL 	0x000A 	NWSMS_RP_CALL_BARRED 	"Call barred"
VAL 	0x0015 	NWSMS_RP_SM_TRANSFER_REJECTED 	"Short message transfer rejected"
VAL 	0x0016 	NWSMS_RP_MEM_CAP_EXCEEDED 	"Memory Capacity exceeded"
VAL 	0x001B 	NWSMS_RP_DEST_OUT_OF_ORDER 	"Destination out of order"
VAL 	0x001C 	NWSMS_RP_UNIDENT_SUBSCRIBER 	"Unidentified subscriber"
VAL 	0x001D 	NWSMS_RP_FACILITY_REJECTED 	"Facility rejected"
VAL 	0x001E 	NWSMS_RP_UNKNOWN_SUBSCRIBER 	"Unknown subscriber"
VAL 	0x0026 	NWSMS_RP_NET_OUT_OF_ORDER 	"Network out of order"
VAL 	0x0029 	NWSMS_RP_TEMP_FAILURE 	"Temporary Failure"
VAL 	0x002A 	NWSMS_RP_CONGESTION 	"Congestion"
VAL 	0x002F 	NWSMS_RP_NO_RESOURCES 	"Resources unavailable, unspecified"
VAL 	0x0032 	NWSMS_RP_FAC_NOT_SUBSCRIBED 	"Requested facility not subscribed"
VAL 	0x0045 	NWSMS_RP_FAC_NOT_IMPL 	"Requested facility not implemented"
VAL 	0x0051 	NWSMS_RP_INV_SM_TR_REF_VAL 	"Invalid short message transfer reference value"
VAL 	0x005F 	NWSMS_RP_SEM_INC_MSG 	"Semantically incorrect message"
VAL 	0x0060 	NWSMS_RP_INV_MAND_INFO 	"Invalid mandatory information"
VAL 	0x0061 	NWSMS_RP_MSG_NON_EXIST 	"Message type non-existent or not implemented"
VAL 	0x0062 	NWSMS_RP_MSG_NOT_COMP 	"Message not compatible with the short message protocol state"
VAL 	0x0063 	NWSMS_RP_INFO_NON_EXIST 	"Information element non-existent or not implemented"
VAL 	0x006F 	NWSMS_RP_PROTOCOL_ERROR 	"Protocol error, unspecified"
VAL 	0x007F 	NWSMS_RP_INTERWORKING 	"Interworking, unspecified"

VALTAB 	VAL_nwsms_tp_cause
VAL 	0x80 	NWSMS_TP_TM_IW_NOT_SUP 	"Telematic interworking not supported (MO)"
VAL 	0x81 	NWSMS_TP_SM_0_NOT_SUP 	"Short Message Type 0 not supported (MO, MT)"
VAL 	0x82 	NWSMS_TP_CANT_REP_SM 	"Cannot replace short message (MO, MT)"
VAL 	0x8F 	NWSMS_TP_TP_PID_UNSPEC 	"Unspecified TP-PID error (MO, MT)"
VAL 	0x90 	NWSMS_TP_DCS_NOT_SUP 	"Data coding scheme (alphabet) not supported (MO)"
VAL 	0x91 	NWSMS_TP_CLASS_NOT_SUP 	"Message class not supported (MT)"
VAL 	0x9F 	NWSMS_TP_TP_DCS_UNSPEC 	"Unspecified TP-DCS error (MO, MT)"
VAL 	0xA0 	NWSMS_TP_CMD_CANT_ACT 	"Command cannot be actioned (MO)"
VAL 	0xA1 	NWSMS_TP_CMD_NOT_SUP 	"Command unsupported (MO)"
VAL 	0xAF 	NWSMS_TP_TP_CMD_UNSPEC 	"Unspecified TP-Command error (MO)"
VAL 	0xB0 	NWSMS_TP_TPDU_NOT_SUP 	"TPDU not supported (MO, MT)"
VAL 	0xC0 	NWSMS_TP_SC_BUSY 	"SC busy (MO)"
VAL 	0xC1 	NWSMS_TP_NO_SC_SUBSCRIPT 	"No SC subscription (MO)"
VAL 	0xC2 	NWSMS_TP_SC_SYS_FAIL 	"SC system failure (MO)"
VAL 	0xC3 	NWSMS_TP_INV_SME_ADDR 	"Invalid SME address (MO)"
VAL 	0xC4 	NWSMS_TP_DEST_SME_BARRED 	"Destination SME barred (MO)"
VAL 	0xC5 	NWSMS_TP_REJ_DUPL_SM 	"SM rejected-duplicate SM (MO)"
VAL 	0xC6 	NWSMS_TP_TPVPF_NOT_SUP 	"Validity Period Format not supported (MO)"
VAL 	0xC7 	NWSMS_TP_TPVP_NOT_SUP 	"Validity Period not supported (MO)"
VAL 	0xD0 	NWSMS_TP_SIM_MEM_FULL 	"SIM SMS storage full (MT)"
VAL 	0xD1 	NWSMS_TP_NO_SMS_MEM_IN_MS 	"No SMS storage capability in SIM (MT)"
VAL 	0xD2 	NWSMS_TP_ERROR_IN_MS 	"Error in MS (MT)"
VAL 	0xD3 	NWSMS_TP_MEM_CAP_EXCEED 	"Memory Capacity exceeded (MO, MT)"
VAL 	0xD4 	NWSMS_TP_SAT_BUSY 	"SIM Application Toolkit busy (MT)"
VAL 	0xD5 	NWSMS_TP_SAT_DNL_ERROR 	"SIM Data Download error (MT)"
VAL 	0xFF 	NWSMS_TP_UNSPECIFIED 	"Unspecified error cause (MO, MT)"

VALTAB 	VAL_sn_cause
VAL 	0x0000 	SN_NORMAL_RELEASE 	"normal release (Not specified in 3G)"
VAL 	0x0100 	SN_INVALID_XID 	"invalid XID response"
VAL 	0x0101 	SN_DM_RECEIVED 	"DM received"
VAL 	0x0102 	SN_NO_PEER_RESPONSE 	"no peer response"
VAL 	0x0103 	SN_LOWLAYER_DEACT 	"lower layer deactivation"

VALTAB 	VAL_upm_cause
VAL 	0x0000 	UPM_NORMAL_RELEASE 	"normal release"
VAL 	0x0010 	UPM_DTI_DISCONNECT 	"The DTI was closed for some reason"
VAL 	0x0200 	UPM_RT_QOS_RELEASE 	"A real-time QoS caused a (RAB) release"
VAL 	0x0201 	UPM_REEST_NEEDED 	"A real-time QoS context needs (RAB) reestablishment"
VAL 	0x0202 	UPM_REEST_REJECT 	"A reestablishment was rejected"

VALTAB 	VAL_rrlc_cause
VAL 	0 	LCS_OK 	"no error"
VAL 	1 	LCS_ERROR 	"Unspecified  error"
VAL 	10 	LCS_WRONG_BTS 	"Serving Cell BTS differs from Reference BTS"
VAL 	20 	LCS_HANDOVER 	"handover occured during Position Measurement procedure"




VAR 	cc_cause 	"Cause element containing result of a CC operation" 	S

VAL 	@p_8010_153_cause_include - VAL_cc_cause@ 	

VAR 	nwcc_cause 	"Cause element containing result of a CC operation" 	S

VAL 	@p_8010_153_cause_include - VAL_nwcc_cause@ 	

VAR 	nwss_cause 	"Cause element containing result of a SS operation" 	S

VAL 	@p_8010_153_cause_include - VAL_nwcc_cause@ 	

VAR 	dl_cause 	"Cause element containing result of a DL operation" 	S

VAL 	@p_8010_153_cause_include - VAL_dl_cause@ 	

VAR 	l2r_cause 	"Cause element containing result of a L2R operation" 	S

VAL 	@p_8010_153_cause_include - VAL_l2r_cause@ 	

VAR 	llc_cause 	"Cause element containing result of a LLC operation" 	S

VAL 	@p_8010_153_cause_include - VAL_llc_cause@ 	

VAR 	mm_cause 	"Cause element containing result of an MM operation" 	S

VAL 	@p_8010_153_cause_include - VAL_mm_cause@ 	

VAR 	nwmm_cause 	"Cause element from network peer MM" 	S

VAL 	@p_8010_153_cause_include - VAL_nwmm_cause@ 	

VAR 	ppp_cause 	"Cause element containing result of a PPP operation" 	S

VAL 	@p_8010_153_cause_include - VAL_ppp_cause@ 	

VAR 	upper_nw_cause 	"If ctrl_value is below is_from_nw the cause originates from NW. Do NOT use as real value of ctrl_value." 	S


VAR 	upper_ue_cause 	"If ctrl_value is between is_from_nw and is_from_ue the cause originates from UE. Do NOT use as real value of ctrl_value." 	S


VAR 	rcm_cause 	"Cause element containing result of an RCM operation" 	S

VAL 	@p_8010_153_cause_include - VAL_rcm_cause@ 	

VAR 	rr_cause 	"Cause element containing result of an RR operation" 	S

VAL 	@p_8010_153_cause_include - VAL_rr_cause@ 	

VAR 	nwrr_cause 	"Cause element from GSM peer RR" 	S

VAL 	@p_8010_153_cause_include - VAL_nwrr_cause@ 	

VAR 	rlp_cause 	"Cause element containing result of an RLP operation" 	S

VAL 	@p_8010_153_cause_include - VAL_rlp_cause@ 	

VAR 	rrc_cause 	"Cause element containing result of an RRC operation" 	S

VAL 	@p_8010_153_cause_include - VAL_rrc_cause@ 	

VAR 	nwrrc_cause 	"Cause element from UTRAN peer RRC" 	S

VAL 	@p_8010_153_cause_include - VAL_nwrrc_cause@ 	

VAR 	sim_cause 	"Cause element from SIM to ACI/SMS/MM" 	S

VAL 	@p_8010_153_cause_include - VAL_sim_cause@ 	

VAR 	sm_cause 	"Cause element containing result of an SM operation" 	S

VAL 	@p_8010_153_cause_include - VAL_sm_cause@ 	

VAR 	nwsm_cause 	"Cause element from network peer SM" 	S

VAL 	@p_8010_153_cause_include - VAL_nwsm_cause@ 	

VAR 	sms_cause 	"Cause element containing result of an SMS operation" 	S

VAL 	@p_8010_153_cause_include - VAL_sms_cause@ 	

VAR 	nwsms_cp_cause 	"Cause element containing result of an SMS operation" 	S

VAL 	@p_8010_153_cause_include - VAL_nwsms_cp_cause@ 	

VAR 	nwsms_rp_cause 	"Cause element containing result of an SMS operation" 	S

VAL 	@p_8010_153_cause_include - VAL_nwsms_rp_cause@ 	

VAR 	nwsms_tp_cause 	"Cause element containing result of an SMS operation" 	S

VAL 	@p_8010_153_cause_include - VAL_nwsms_tp_cause@ 	

VAR 	sn_cause 	"Cause element containing result of an SNDCP operation" 	S

VAL 	@p_8010_153_cause_include - VAL_sn_cause@ 	

VAR 	upm_cause 	"Cause element containing result of an UPM operation" 	S

VAL 	@p_8010_153_cause_include - VAL_upm_cause@ 	

VAR 	rrlc_cause 	"cause" 	B

VAL 	@p_8010_153_cause_include - VAL_rrlc_cause@ 	




UNION 	value 	 "Cause element containing result of operation"
{
 	is_from_nwmm 	nwmm_cause 	 ; MM Network cause
 	is_from_nwrr 	nwrr_cause 	 ; RR Network cause
 	is_from_nwrrc 	nwrrc_cause 	 ; RRC Network cause
 	is_from_nwsm 	nwsm_cause 	 ; SM Network cause
 	is_from_nwss 	nwss_cause 	 ; SS Network cause
 	is_from_nwsms_cp 	nwsms_cp_cause 	 ; SMS CP Network Cause
 	is_from_nwsms_rp 	nwsms_rp_cause 	 ; SMS RP Network Cause
 	is_from_nwsms_tp 	nwsms_tp_cause 	 ; SMS TP Network Cause
 	is_from_nw 	upper_nw_cause 	 ; If ctrl_value is below is_from_nw the cause originates from NW. Do NOT use as real value of ctrl_value.
 	is_from_cc 	cc_cause 	 ; CC cause
 	is_from_dl 	dl_cause 	 ; DL cause
 	is_from_l2r 	l2r_cause 	 ; L2R cause
 	is_from_llc 	llc_cause 	 ; LLC cause
 	is_from_mm 	mm_cause 	 ; MM cause
 	is_from_nwcc 	nwcc_cause 	 ; CC Network cause
 	is_from_ppp 	ppp_cause 	 ; PPP cause
 	is_from_rcm 	rcm_cause 	 ; RCM cause
 	is_from_rr 	rr_cause 	 ; RR cause
 	is_from_rlp 	rlp_cause 	 ; RLP cause
 	is_from_rrc 	rrc_cause 	 ; RRC cause
 	is_from_sim 	sim_cause 	 ; SIM cause
 	is_from_sm 	sm_cause 	 ; SM cause
 	is_from_sms 	sms_cause 	 ; SMS cause
 	is_from_sndcp 	sn_cause 	 ; SNDCP cause
 	is_from_upm 	upm_cause 	 ; UPM cause
 	is_from_ue 	upper_ue_cause 	 ; If ctrl_value is between is_from_nw and is_from_ue the cause originates from UE. Do NOT use as real value of ctrl_value.
 	is_from_rrlc 	rrlc_cause 	 ; RRLC cause value
}



COMP 	ps_cause 	 "Cause element containing result of operation"
{
 	value 	 ; Cause value
}






; CAUSE_EXPORT 	0x0000



PRIM 	CAUSE_EXPORT 	0x0000
{
 	ps_cause 	 ; Cause element containing result of operation
}