view cdg-hybrid/sap/ipa.pdf @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents e7a67accfad9
children
line wrap: on
line source

;********************************************************************************
;*** File           : ipa.pdf
;*** Creation       : Wed Mar 11 09:58:13 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : ipa
;*** Document No.   : 8444.104.02.007
;*** Document Date  : 2003-08-30
;*** Document Status: BEING_PROCESSED
;*** Document Author: Jacek
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:43:54 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-30"
PRAGMA 	ID_AND_VERSION 	"8444.104.02.007"



CONST 	IPA_ENTITY_NAME_LEN 	6 	; maximum length of entity name including NULL



VALTAB 	VAL_dti_conn
VAL 	0 	IPA_CONNECT_DTI 	"Connect DTI2 to IP"
VAL 	1 	IPA_DISCONNECT_DTI 	"Disconnect DTI2 from IP"

VALTAB 	VAL_link_id
VAL 	0 	IPA_LINK_ID_DEFAULT 	"Default link id"

VALTAB 	VAL_dti_direction
VAL 	0 	IPA_DTI_TO_HIGHER_LAYER 	"DTI2 used normally"
VAL 	1 	IPA_DTI_TO_LOWER_LAYER 	"DTI2 is inverted"

VALTAB 	VAL_cmd
VAL 	0 	IPA_CONFIG_UP 	"enable the interface"
VAL 	1 	IPA_CONFIG_DOWN 	"disable the interface"

VALTAB 	VAL_ack_flag
VAL 	0 	IPA_CONFIG_ACK 	"Acknowledged"
VAL 	1 	IPA_CONFIG_NAK 	"not acknowledged"

VALTAB 	VAL_all_down
VAL 	0 	IPA_ALLDOWN_FALSE 	">= 1 Interface still up"
VAL 	1 	IPA_ALLDOWN_TRUE 	"all interfaces down"




VAR 	dti_conn 	"DTI2 connect" 	B

VAL 	@p_ipa - VAL_dti_conn@ 	

VAR 	link_id 	"Link identifier" 	L

VAL 	@p_ipa - VAL_link_id@ 	

VAR 	dti_direction 	"DTI2 direction" 	B

VAL 	@p_ipa - VAL_dti_direction@ 	

VAR 	ip 	"IP address" 	L


VAR 	peer_ip 	"peer IP address" 	L


VAR 	mtu 	"maximum transfer unit" 	S


VAR 	cmd 	"Command" 	B

VAL 	@p_ipa - VAL_cmd@ 	

VAR 	ack_flag 	"acknowledge flag" 	B

VAL 	@p_ipa - VAL_ack_flag@ 	

VAR 	all_down 	"all interfaces down flag" 	B

VAL 	@p_ipa - VAL_all_down@ 	

VAR 	entity_name 	"name of an neighbour entity" 	B








; IPA_DTI_REQ 	0x8000003C
; IPA_DTI_CNF 	0x8000403C
; IPA_DTI_IND 	0x8001403C
; IPA_CONFIG_REQ 	0x8001003C
; IPA_CONFIG_CNF 	0x8002403C



PRIM 	IPA_DTI_REQ 	0x8000003C
{
 	dti_conn 	 ; DTI connect
 	entity_name 	[IPA_ENTITY_NAME_LEN] 	 ; entity name
 	link_id 	 ; link identifier
 	dti_direction 	 ; DTI direction
}






PRIM 	IPA_DTI_CNF 	0x8000403C
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; link identifier
}






PRIM 	IPA_DTI_IND 	0x8001403C
{
 	link_id 	 ; link identifier
}






PRIM 	IPA_CONFIG_REQ 	0x8001003C
{
 	ip 	 ; IP address
 	peer_ip 	 ; peer IP address
 	mtu 	 ; Maximum transfer unit
 	cmd 	 ; Command
}






PRIM 	IPA_CONFIG_CNF 	0x8002403C
{
 	ack_flag 	 ; Acknowledge flag
 	all_down 	 ; all interfaces down flag
}