FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/l1test.pdf @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : l1test.pdf ;*** Creation : Wed Mar 11 09:58:09 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : l1test ;*** Document No. : 8010.148.03.003 ;*** Document Date : 2003-06-06 ;*** Document Status: BEING_PROCESSED ;*** Document Author: AGR ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:44:08 2007" PRAGMA LAST_MODIFIED "2003-06-06" PRAGMA ID_AND_VERSION "8010.148.03.003" PRAGMA PREFIX L1TEST ; Prefix for this document PRAGMA ALLWAYS_ENUM_IN_VAL_FILE NO ; Enumeration values in value file PRAGMA ENABLE_GROUP NO ; Enable h-file grouping PRAGMA COMPATIBILITY_DEFINES NO ; Compatible to the old #defines CONST TEST_BUFFER_SIZE 1000 ; Test data buffer size CONST MAX_TIMESLOTS 8 ; Defines the maximum number of timeslots per frame CONST BURST_PER_BLOCK 4 ; Number of bursts that compose a block VAR chn_mode "Channel mode" B VAR valid_flag "Valid flag for received data" B VAR d_ra_conf "Traffic control register" S VAR d_ra_act "Activity word" S VAR d_fax "Fax status and parameter word" S VAR d_ra_statu "Rate adaptation status word for uplink" S VAR d_ra_statd "Rate adaptation status word for downlink" S VAR crc_error "CRC error" B VAR bcch_level "BCCH level" C VAR radio_freq "Radio frequency" S VAR burst_level "Burst level" C VAR pch "PCH" B VAR assignment_id "Assignment Id" B VAR tx_data_no "Tx data number" B VAR fn "Frame number" L VAR timing_advance_value "Timing advance value" B VAR allocation_exhausted "Allocation exhausted" B VAR rlc_blocks_sent "RLC blocks sent" B VAR last_poll_response "Last poll response" B ; L1TEST_CALL_MPHC_READ_DCCH 0x8000409B ; L1TEST_RETURN_MPHC_READ_DCCH 0x8000009B ; L1TEST_CALL_MPHC_DCCH_DOWNLINK 0x8001409B ; L1TEST_RETURN_MPHC_DCCH_DOWNLINK 0x8001009B ; L1TEST_CALL_MPHC_DATA_UL 0x8002409B ; L1TEST_RETURN_MPHC_DATA_UL 0x8002009B ; L1TEST_CALL_MPHC_DATA_DL 0x8003409B ; L1TEST_RETURN_MPHC_DATA_DL 0x8003009B ; L1TEST_CALL_MPHP_POWER_CONTROL 0x8004409B ; L1TEST_RETURN_MPHP_POWER_CONTROL 0x8004009B ; L1TEST_CALL_MPHP_UPLINK 0x8005409B ; L1TEST_RETURN_MPHP_UPLINK 0x8005009B ; L1TEST_CALL_MPHP_DOWNLINK 0x8006409B ; L1TEST_RETURN_MPHP_DOWNLINK 0x8006009B PRIM L1TEST_CALL_MPHC_READ_DCCH 0x8000409B { chn_mode ; Channel mode } PRIM L1TEST_RETURN_MPHC_READ_DCCH 0x8000009B { EXTERN @p_mphc - l2_frame@ l2_frame ; L2 radio frame } PRIM L1TEST_CALL_MPHC_DCCH_DOWNLINK 0x8001409B { EXTERN @p_mphc - l2_frame@ l2_frame ; L2 radio frame valid_flag ; Valid flag for received data } PRIM L1TEST_RETURN_MPHC_DCCH_DOWNLINK 0x8001009B { } PRIM L1TEST_CALL_MPHC_DATA_UL 0x8002409B { } PRIM L1TEST_RETURN_MPHC_DATA_UL 0x8002009B { EXTERN @p_mphc - l2_frame@ l2_frame ; L2 radio frame d_ra_conf ; Traffic control register d_ra_act ; Activity word d_ra_statu ; Rate adaptation status word d_fax ; Fax status and parameter word } PRIM L1TEST_CALL_MPHC_DATA_DL 0x8003409B { EXTERN @p_mphc - l2_frame@ l2_frame ; L2 radio frame d_ra_act ; Activity word d_ra_statd ; Rate adaptation status word } PRIM L1TEST_RETURN_MPHC_DATA_DL 0x8003009B { } PRIM L1TEST_CALL_MPHP_POWER_CONTROL 0x8004409B { assignment_id ; Assignment Id crc_error ; CRC error bcch_level ; BCCH level radio_freq [BURST_PER_BLOCK] ; Radio frequency burst_level [BURST_PER_BLOCK] ; Burst level } PRIM L1TEST_RETURN_MPHP_POWER_CONTROL 0x8004009B { pch [MAX_TIMESLOTS] ; PCH } PRIM L1TEST_CALL_MPHP_UPLINK 0x8005409B { assignment_id ; Assignment Id tx_data_no ; Tx data number fn ; Frame number timing_advance_value ; Timing advance value allocation_exhausted ; Allocation exhausted } PRIM L1TEST_RETURN_MPHP_UPLINK 0x8005009B { EXTERN @p_mac - ul_poll_resp@ ul_poll_resp [4] ; UL poll response EXTERN @p_mac - ul_data@ ul_data [4] ; UL data } PRIM L1TEST_CALL_MPHP_DOWNLINK 0x8006409B { assignment_id ; Assignment Id fn ; Frame number EXTERN @p_mac - dl_data@ dl_data [0..4] ; DL data rlc_blocks_sent ; RLC blocks sent last_poll_response ; Last poll response } PRIM L1TEST_RETURN_MPHP_DOWNLINK 0x8006009B { }