FreeCalypso > hg > fc-magnetite
view cdg-hybrid/sap/uart.pdf @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | e7a67accfad9 |
children |
line wrap: on
line source
;******************************************************************************** ;*** File : uart.pdf ;*** Creation : Wed Mar 11 09:58:54 CST 2009 ;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1 ;*** Copyright : (c) Texas Instruments AG, Berlin Germany 2002 ;******************************************************************************** ;*** Document Type : Service Access Point Specification ;*** Document Name : uart ;*** Document No. : 8441.117.99.014 ;*** Document Date : 2002-03-11 ;*** Document Status: BEING_PROCESSED ;*** Document Author: TVO ;******************************************************************************** PRAGMA SRC_FILE_TIME "Thu Nov 29 09:56:02 2007" PRAGMA LAST_MODIFIED "2002-03-11" PRAGMA ID_AND_VERSION "8441.117.99.014" CONST UART_DLCI_NOT_MULTIPLEXED 0 ; VALTAB VAL_esc_valid VAL 0 UART_IO_ESC_UNDEF "values for escape sequence detection remain unchanged" VAL 1 UART_IO_ESC_VALID "values for escape sequence detection are valid" VALTAB VAL_xoff VAL 19 UART_IO_XOFF_DEFAULT "default value for XOff character" VALTAB VAL_xon VAL 17 UART_IO_XON_DEFAULT "default value for XOn character" VALTAB VAL_parity VAL 255 UART_IO_PA_UNDEF "parity remain unchanged" VAL 0 UART_IO_PA_NONE "no parity and no space" VAL 1 UART_IO_PA_EVEN "even parity" VAL 2 UART_IO_PA_ODD "odd parity" VAL 3 UART_IO_PA_SPACE "no parity but space" VALTAB VAL_flow_tx VAL 255 UART_IO_FC_TX_UNDEF "TX flow control mode remain unchanged" VAL 0 UART_IO_FC_TX_NONE "no TX flow control" VAL 1 UART_IO_FC_TX_RTS "RTS/CTS flow control" VAL 2 UART_IO_FC_TX_XOFF "XON/XOFF flow control" VALTAB VAL_esc_char VAL 43 UART_IO_ESC_CHAR_DEFAULT "default value for escape character ('+')" VALTAB VAL_flow_rx VAL 255 UART_IO_FC_RX_UNDEF "RX flow control mode remain unchanged" VAL 0 UART_IO_FC_RX_NONE "no RX flow control" VAL 1 UART_IO_FC_RX_RTS "RTS/CTS flow control" VAL 2 UART_IO_FC_RX_XOFF "XON/XOFF flow control" VALTAB VAL_nsb VAL 255 UART_IO_SB_UNDEF "stop bits remain unchanged" VAL 1 UART_IO_SB_1 "one stop bit" VAL 2 UART_IO_SB_2 "two stop bits" VALTAB VAL_speed VAL 255 UART_IO_SPEED_UNDEF "baud rate remain unchanged" VAL 0 UART_IO_SPEED_AUTO "auto detection of baud rate" VAL 1 UART_IO_SPEED_75 "baud rate of 75 bits per second" VAL 2 UART_IO_SPEED_150 "baud rate of 150 bits per second" VAL 3 UART_IO_SPEED_300 "baud rate of 300 bits per second" VAL 4 UART_IO_SPEED_600 "baud rate of 600 bits per second" VAL 5 UART_IO_SPEED_1200 "baud rate of 1200 bits per second" VAL 6 UART_IO_SPEED_2400 "baud rate of 2400 bits per second" VAL 7 UART_IO_SPEED_4800 "baud rate of 4800 bits per second" VAL 8 UART_IO_SPEED_7200 "baud rate of 7200 bits per second" VAL 9 UART_IO_SPEED_9600 "baud rate of 9600 bits per second" VAL 10 UART_IO_SPEED_14400 "baud rate of 14400 bits per second" VAL 11 UART_IO_SPEED_19200 "baud rate of 19200 bits per second" VAL 12 UART_IO_SPEED_28800 "baud rate of 28800 bits per second" VAL 13 UART_IO_SPEED_33900 "baud rate of 33900 bits per second" VAL 14 UART_IO_SPEED_38400 "baud rate of 38400 bits per second" VAL 15 UART_IO_SPEED_57600 "baud rate of 57600 bits per second" VAL 16 UART_IO_SPEED_115200 "baud rate of 115200 bits per second" VAL 17 UART_IO_SPEED_203125 "baud rate of 203125 bits per second" VAL 18 UART_IO_SPEED_406250 "baud rate of 406250 bits per second" VAL 19 UART_IO_SPEED_812500 "baud rate of 812500 bits per second" VALTAB VAL_esc_gp VAL 1000 UART_IO_ESC_GP_DEFAULT "default value for guard period (1000 ms)" VAL 0 UART_IO_ESC_OFF "no escape sequence detection" VALTAB VAL_xoff_valid VAL 0 UART_IO_XOFF_UNDEF "XOff character remain unchanged" VAL 1 UART_IO_XOFF_VALID "XOff character valid" VALTAB VAL_xon_valid VAL 0 UART_IO_XON_UNDEF "XOn character remain unchanged" VAL 1 UART_IO_XON_VALID "XOn character valid" VALTAB VAL_bpc VAL 255 UART_IO_BPC_UNDEF "bits per character remain unchanged" VAL 7 UART_IO_BPC_7 "7 bits per character" VAL 8 UART_IO_BPC_8 "8 bits per character" VALTAB VAL_dti_conn VAL 0 UART_CONNECT_DTI "Connect DTI to UART" VAL 1 UART_DISCONNECT_DTI "Disconnect DTI from UART" VALTAB VAL_line_state VAL 0 UART_LINE_ON "activate line" VAL 1 UART_LINE_OFF "deactivate line" VALTAB VAL_detection VAL 0 UART_ESC_DETECTION_OFF "turn off escape sequence detection" VAL 1 UART_ESC_DETECTION_ON "turn on escape sequence detection" VALTAB VAL_cause VAL 1 UART_DETECT_ESC "escape sequence detected" VAL 2 UART_DETECT_DTR "DTR line of serial link drops" VALTAB VAL_error VAL 8 UART_ERROR_NO_CHANNEL "can not open VSI communication channel" VAL 9 UART_ERROR_MUX_ESTABLISH_FAIL "establishment of multiplexer operation fails" VAL 10 UART_ERROR_MUX_NO_RESPONSE "no response from TE multiplexer" VALTAB VAL_mode VAL 0 UART_MUX_MODE_BASIC "basic option" VAL 1 UART_MUX_MODE_ADVANCED "advanced option" VALTAB VAL_frame_type VAL 0 UART_MUX_FRAME_UIH "UIH frames used only" VAL 1 UART_MUX_FRAME_UI "UI frames used only" VAL 2 UART_MUX_FRAME_I "I frames used only" VAL 0 UART_MUX_FRAME_DEFAULT "default value" VALTAB VAL_n1 VAL 31 UART_MUX_N1_BASIC_DEFAULT "default value for the basic option" VAL 64 UART_MUX_N1_ADVANCED_DEFAULT "default value for the advanced option" VALTAB VAL_t1 VAL 10 UART_MUX_T1_DEFAULT "default value (100 ms)" VALTAB VAL_n2 VAL 3 UART_MUX_N2_DEFAULT "default value" VALTAB VAL_t2 VAL 30 UART_MUX_T2_DEFAULT "default value (300 ms)" VALTAB VAL_t3 VAL 10 UART_MUX_T3_DEFAULT "default value (10 seconds)" VALTAB VAL_convergence VAL 1 UART_MUX_CONVERGENCE_UOS "unstructed octet stream" VAL 2 UART_MUX_CONVERGENCE_UOSV24 "unstructed octet stream with transmission of V.24 signal states" VAL 3 UART_MUX_CONVERGENCE_UFD "uninterruptible framed data" VAL 4 UART_MUX_CONVERGENCE_IFD "interruptible framed data" VAL 1 UART_MUX_CONVERGENCE_DEFAULT "default value" VALTAB VAL_service VAL 0 UART_MUX_SERVICE_AT "AT command mode" VAL 1 UART_MUX_SERVICE_DATA "data service" VAL 2 UART_MUX_SERVICE_VOICE_0621 "voice service (coded - GSM 06.21)" VAL 3 UART_MUX_SERVICE_VOICE_PCM64U "voice service (coded - PCM 64 kbits/s U-law)" VAL 4 UART_MUX_SERVICE_VOICE_ADPCM "voice service (coded - ADPCM 32 kbits/s)" VAL 5 UART_MUX_SERVICE_VOICE_PCM64A "voice service (coded - PCM 64 kbits/s A-law)" VAL 6 UART_MUX_SERVICE_VOICE_PCM128 "voice service (coded - PCM 128 kbits/s)" VAL 7 UART_MUX_SERVICE_GPRS "GPRS data" VAL 8 UART_MUX_SERVICE_CS "Circuit-Switched data" VAL 9 UART_MUX_SERVICE_TRACE "Trace / Debug output" VAL 0 UART_MUX_SERVICE_DEFAULT "default value" VAR device "device number" B VAR dlci "data link connection identifier" B VAR speed "baud rate" B VAL @p_uart - VAL_speed@ VAR bpc "bits per character" B VAL @p_uart - VAL_bpc@ VAR nsb "stop bits" B VAL @p_uart - VAL_nsb@ VAR parity "parity of serial link" B VAL @p_uart - VAL_parity@ VAR flow_rx "flow control mode RX" B VAL @p_uart - VAL_flow_rx@ VAR flow_tx "flow control mode TX" B VAL @p_uart - VAL_flow_tx@ VAR xon_valid "indicator whether xon is valid" B VAL @p_uart - VAL_xon_valid@ VAR xon "XOn character for XON/XOFF flow control" B VAL @p_uart - VAL_xon@ VAR xoff_valid "indicator whether xoff is valid" B VAL @p_uart - VAL_xoff_valid@ VAR xoff "XOff character for XON/XOFF flow control" B VAL @p_uart - VAL_xoff@ VAR esc_valid "indicator whether esc_char and esc_gp are valid" B VAL @p_uart - VAL_esc_valid@ VAR esc_char "escape character" B VAL @p_uart - VAL_esc_char@ VAR esc_gp "guard period" S VAL @p_uart - VAL_esc_gp@ VAR dti_conn "DTI connect" B VAL @p_uart - VAL_dti_conn@ VAR direction "direction of the DTI link" B VAR link_id "identifier of DTI connection" L VAR entity_name "communication entity name" L VAR uart_instances "number of UART instances" B VAR line_state "state of line" B VAL @p_uart - VAL_line_state@ VAR detection "escape sequence detection" B VAL @p_uart - VAL_detection@ VAR cause "cause of indication" B VAL @p_uart - VAL_cause@ VAR error "error code" B VAL @p_uart - VAL_error@ VAR mode "transparency mechanism" B VAL @p_uart - VAL_mode@ VAR frame_type "type of frame" B VAL @p_uart - VAL_frame_type@ VAR n1 "maximum frame size" S VAL @p_uart - VAL_n1@ VAR t1 "acknowledgement timer" B VAL @p_uart - VAL_t1@ VAR n2 "maximum numer of retransmissions" B VAL @p_uart - VAL_n2@ VAR t2 "response timer for the multiplexer control channel" B VAL @p_uart - VAL_t2@ VAR t3 "wake up response timer" B VAL @p_uart - VAL_t3@ VAR convergence "convergence layer" B VAL @p_uart - VAL_convergence@ VAR service "service on DLC" B VAL @p_uart - VAL_service@ VAR devId "device ID" L COMP comPar "Parameters of serial link" { speed ; baud rate bpc ; bits per character nsb ; stop bits parity ; parity of serial link flow_rx ; flow control mode RX flow_tx ; flow control mode TX xon_valid ; indicator whether xon is valid xon ; XOn character for XON/XOFF flow control xoff_valid ; indicator whether xoff is valid xoff ; XOff character for XON/XOFF flow control esc_valid ; indicator whether esc_char and esc_gp are valid esc_char ; escape character esc_gp ; guard period } ; UART_PARAMETERS_REQ 0x7400 ; UART_PARAMETERS_CNF 0x3400 ; UART_PARAMETERS_IND 0x3401 ; UART_DTI_REQ 0x7401 ; UART_DTI_CNF 0x3402 ; UART_DTI_IND 0x3403 ; UART_DISABLE_REQ 0x7402 ; UART_DISABLE_CNF 0x3404 ; UART_RING_REQ 0x7403 ; UART_RING_CNF 0x3405 ; UART_DCD_REQ 0x7404 ; UART_DCD_CNF 0x3406 ; UART_ESCAPE_REQ 0x7405 ; UART_ESCAPE_CNF 0x3407 ; UART_DETECTED_IND 0x3408 ; UART_ERROR_IND 0x3409 ; UART_MUX_START_REQ 0x7406 ; UART_MUX_START_CNF 0x340A ; UART_MUX_DLC_ESTABLISH_IND 0x340B ; UART_MUX_DLC_ESTABLISH_RES 0x7407 ; UART_MUX_DLC_RELEASE_REQ 0x7408 ; UART_MUX_DLC_RELEASE_IND 0x340C ; UART_MUX_SLEEP_REQ 0x7409 ; UART_MUX_SLEEP_IND 0x340D ; UART_MUX_WAKEUP_REQ 0x740A ; UART_MUX_WAKEUP_IND 0x340E ; UART_MUX_CLOSE_REQ 0x740B ; UART_MUX_CLOSE_IND 0x340F ; UART_DRIVER_SENT_IND 0x740C ; UART_DRIVER_RECEIVED_IND 0x740D ; UART_DRIVER_FLUSHED_IND 0x740E ; UART_DRIVER_CONNECT_IND 0x740F ; UART_DRIVER_DISCONNECT_IND 0x7410 ; UART_DRIVER_CLEAR_IND 0x7411 PRIM UART_PARAMETERS_REQ 0x7400 { device ; device number comPar ; Parameters of serial link } PRIM UART_PARAMETERS_CNF 0x3400 { device ; device number } PRIM UART_PARAMETERS_IND 0x3401 { uart_instances ; number of UART instances } PRIM UART_DTI_REQ 0x7401 { dti_conn ; DTI connect device ; device number dlci ; data link connection identifier direction ; direction of the DTI link link_id ; identifier of DTI connection entity_name ; communication entity name } PRIM UART_DTI_CNF 0x3402 { dti_conn ; DTI connect device ; device number dlci ; data link connection identifier } PRIM UART_DTI_IND 0x3403 { dti_conn ; DTI connect device ; device number dlci ; data link connection identifier } PRIM UART_DISABLE_REQ 0x7402 { device ; device number } PRIM UART_DISABLE_CNF 0x3404 { device ; device number } PRIM UART_RING_REQ 0x7403 { device ; device number dlci ; data link connection identifier line_state ; states of line } PRIM UART_RING_CNF 0x3405 { device ; device number dlci ; data link connection identifier } PRIM UART_DCD_REQ 0x7404 { device ; device number dlci ; data link connection identifier line_state ; states of line } PRIM UART_DCD_CNF 0x3406 { device ; device number dlci ; data link connection identifier } PRIM UART_ESCAPE_REQ 0x7405 { device ; device number dlci ; data link connection identifier detection ; escape sequence detection } PRIM UART_ESCAPE_CNF 0x3407 { device ; device number dlci ; data link connection identifier } PRIM UART_DETECTED_IND 0x3408 { device ; device number dlci ; data link connection identifier cause ; cause of indication } PRIM UART_ERROR_IND 0x3409 { device ; device number dlci ; data link connection identifier error ; error code } PRIM UART_MUX_START_REQ 0x7406 { device ; device number mode ; transparency mechanism frame_type ; type of frame n1 ; maximum frame size t1 ; acknowledgement timer n2 ; maximum numer of retransmissions t2 ; response timer for the multiplexer control channel t3 ; wake up response timer } PRIM UART_MUX_START_CNF 0x340A { device ; device number } PRIM UART_MUX_DLC_ESTABLISH_IND 0x340B { device ; device number dlci ; data link connection identifier convergence ; convergence layer n1 ; maximum frame size service ; service on DLC } PRIM UART_MUX_DLC_ESTABLISH_RES 0x7407 { device ; device number dlci ; data link connection identifier n1 ; maximum frame size } PRIM UART_MUX_DLC_RELEASE_REQ 0x7408 { device ; device number dlci ; data link connection identifier } PRIM UART_MUX_DLC_RELEASE_IND 0x340C { device ; device number dlci ; data link connection identifier } PRIM UART_MUX_SLEEP_REQ 0x7409 { device ; device number } PRIM UART_MUX_SLEEP_IND 0x340D { device ; device number } PRIM UART_MUX_WAKEUP_REQ 0x740A { device ; device number } PRIM UART_MUX_WAKEUP_IND 0x340E { device ; device number } PRIM UART_MUX_CLOSE_REQ 0x740B { device ; device number } PRIM UART_MUX_CLOSE_IND 0x340F { device ; device number } PRIM UART_DRIVER_SENT_IND 0x740C { devId ; Primitive Item } PRIM UART_DRIVER_RECEIVED_IND 0x740D { devId ; Primitive Item } PRIM UART_DRIVER_FLUSHED_IND 0x740E { devId ; Primitive Item } PRIM UART_DRIVER_CONNECT_IND 0x740F { devId ; Primitive Item } PRIM UART_DRIVER_DISCONNECT_IND 0x7410 { devId ; Primitive Item } PRIM UART_DRIVER_CLEAR_IND 0x7411 { devId ; Primitive Item }