FreeCalypso > hg > fc-magnetite
view cdg3/cdginc-locosto/p_fad.val @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
/* +--------------------------------------------------------------------------+ | PROJECT : PROTOCOL STACK | | FILE : p_fad.val | | SOURCE : "sap\fad.pdf" | | LastModified : "2002-04-22" | | IdAndVersion : "8411.103.00.305" | | SrcFileTime : "Thu Nov 29 09:41:22 2007" | | Generated by CCDGEN_2.5.5A on Thu Sep 25 09:18:53 2014 | | !!DO NOT MODIFY!!DO NOT MODIFY!!DO NOT MODIFY!! | +--------------------------------------------------------------------------+ */ /* PRAGMAS * PREFIX : NONE * COMPATIBILITY_DEFINES : NO (require PREFIX) * ALWAYS_ENUM_IN_VAL_FILE: NO * ENABLE_GROUP: NO * CAPITALIZE_TYPENAME: NO */ #ifndef P_FAD_VAL #define P_FAD_VAL #define CDG_ENTER__P_FAD_VAL #define CDG_ENTER__FILENAME _P_FAD_VAL #define CDG_ENTER__P_FAD_VAL__FILE_TYPE CDGINC #define CDG_ENTER__P_FAD_VAL__LAST_MODIFIED _2002_04_22 #define CDG_ENTER__P_FAD_VAL__ID_AND_VERSION _8411_103_00_305 #define CDG_ENTER__P_FAD_VAL__SRC_FILE_TIME _Thu_Nov_29_09_41_22_2007 #include "CDG_ENTER.h" #undef CDG_ENTER__P_FAD_VAL #undef CDG_ENTER__FILENAME /* * Value constants for VAL_trans_rate */ #define R_BCS (0x12c) /* rate 300 bit/s */ #define R_2400 (0x960) /* rate 2400 bit/s */ #define R_4800 (0x12c0) /* rate 4800 bit/s */ #define R_7200 (0x1c20) /* rate 7200 bit/s */ #define R_9600 (0x2580) /* rate 9600 bit/s */ #define R_12000 (0x2ee0) /* rate 12000 bit/s */ #define R_14400 (0x3840) /* rate 14400 bit/s */ /* * Value constants for VAL_mode */ #define MUX_OFF (0x0) /* ignore */ #define MUX_BCS (0x1) /* BCS data */ #define MUX_MSG (0x2) /* MSG data */ /* * Value constants for VAL_cause */ #define ERR_REM_FAD (0xcc00) /* reserved */ #define ERR_REM_PREAMBLE (0xcc11) /* DATA received instead of PREAMBLE - Preamble too short */ #define ERR_REM_DATA_BCS (0xcc12) /* DATA received from remote modem during BCS phase */ #define ERR_REM_TRAIN_START (0xcc13) /* DATA received from remote modem at start of training */ #define ERR_REM_NO_TRAINING (0xcc14) /* DATA received from remote modem prior to training */ #define ERR_REM_TRAINING (0xcc15) /* DATA received from remote modem during training */ #define ERR_REM_MSG (0xcc16) /* DATA received from remote modem while sending MSG data */ #define ERR_REM_PREAMBLE_SHORT (0xcc17) /* PREAMBLE received from remote station too short */ #define ERR_REM_PREAMBLE_LONG (0xcc18) /* PREAMBLE received from remote station too long */ #define ERR_REM_IDENT (0xcc19) /* Incorrect identification from remote modem */ #define ERR_LOCAL_FAD (0xcc20) /* reserved */ #define ERR_LOCAL_BCS_RATE (0xcc21) /* BCS rate requested by local modem (MSG phase) */ #define ERR_LOCAL_MSG_RATE (0xcc22) /* MSG rate requested by local modem (BCS phase) */ #define ERR_LOCAL_DATA_NULL (0xcc23) /* DATA request received from T30 in NULL state */ #define ERR_LOCAL_DATA_BCS (0xcc24) /* DATA request received from T30 while receiving BCS data */ #define ERR_LOCAL_DATA_TCF_SND (0xcc25) /* DATA request received from T30 while sending TCF data */ #define ERR_LOCAL_DATA_TCF_RCV (0xcc26) /* DATA request received from T30 while receiving TCF data */ #define ERR_LOCAL_DATA_MSG (0xcc27) /* DATA request received from T30 while receiving MSG data */ #define ERR_LOCAL_DATA_UNDEF (0xcc28) /* DATA request received from T30 - state unknown */ #define ERR_LOCAL_DATA_MSG_UFL (0xcc29) /* DATA request not received from T30 - MSG-REC underflow */ #define ERR_LOCAL_IDENT (0xcc30) /* Incorrect identification from local modem */ #define ERR_OWN_FAD (0xcc40) /* reserved */ #define ERR_FAD_SUB_TRAIN (0xcc41) /* FAD in unknown substate during training */ #define ERR_FAD_SUB_TCF (0xcc42) /* FAD in unknown substate (TCF) */ #define ERR_FAD_SUB_MSG (0xcc43) /* FAD in unknown substate (MSG) */ #define ERR_GENERAL_FAD (0xcc50) /* reserved */ #define ERR_INVALID_DATA_RCV (0xcc51) /* invalid data received */ #define ERR_EMPTY_BUFFER (0xcc52) /* send/receive buffer is empty */ #define ERR_OVERFLOW_BCS_RCV (0xcc52) /* buffer overflow while receiving BCS data */ #define ERR_NOT_SET (0xccff) /* error not set */ /* * user defined constants */ #define DUMMY_FAD (0x0) #include "CDG_LEAVE.h" #endif