FreeCalypso > hg > fc-magnetite
view cdg3/sap/8010_157_upm_sap.sap @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | c15047b3d00d |
children |
line wrap: on
line source
<?xml version="1.0" encoding="UTF-8"?> <!-- edited with SAPE SAP Editor --> <SAP xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="sap.xsd"> <DocInfoSection> <DocName DocType="SAP">8010_157_upm_sap</DocName> <DocNum Number="157" Project="8010"/> <Description> <Section>This document is part of the High Level Design (HLD) for the Texas Instruments Dual-mode protocol stack. The document describes the service access point between the UPM entity and ACI.</Section> <Section>This SAP is used by the DTI manager to control the UPM DTI connections and by ACI for getting information about the user plane data flow.</Section> </Description> <DocHistory> <DocVersion Number="001" Year="04"/> <Date Day="7" Month="1" Year="2004"/> <Author>MVJ</Author> <DocStatus State="BEING_PROCESSED"/> <Comment>Initial version.</Comment> </DocHistory> <DocHistory> <DocVersion Number="002" Year="04"/> <Date Day="12" Month="1" Year="2004"/> <Author>MVJ</Author> <DocStatus State="BEING_PROCESSED"/> <Comment>Added UPM_COUNT_REQ, UPM_COUNT_CNF and associated imported types.</Comment> </DocHistory> <DocHistory> <DocVersion Number="003" Year="04"/> <Date Day="19" Month="1" Year="2004"/> <Author>MVJ</Author> <DocStatus State="APPROVED"/> <Comment>Updated after review.</Comment> </DocHistory> <DocRef> <RefId>[TI 8010.801]</RefId> <RefTitle>8010.801, "References and Abbreviations (UMTS)", Texas InstrumentsTable of Contents1 Introduction 52 Constants 63 Primitives 73.1 UPM_DTI_REQ 73.2 UPM_DTI_CNF 73.3 UPM_COUNT_REQ 73.4 UPM_COUNT_CNF 84 Parameters 94.1 Imports from Common Include Documents 9</RefTitle> </DocRef> </DocInfoSection> <PragmasSection> <Description> <Section>This section contains all pragmas that are defined for the 8010_157_UPM_SAP SAP</Section> </Description> <Pragma> <Name>PREFIX</Name> <Value ValueType="ALPHA">UPM</Value> <Comment>Prefix for this document</Comment> </Pragma> <Pragma> <Name>ALLWAYS_ENUM_IN_VAL_FILE</Name> <Value ValueType="ALPHA">YES</Value> <Comment>Enumeration values in value file</Comment> </Pragma> <Pragma> <Name>ENABLE_GROUP</Name> <Value ValueType="ALPHA">NO</Value> <Comment>Enable h-file grouping</Comment> </Pragma> <Pragma> <Name>COMPATIBILITY_DEFINES</Name> <Value ValueType="ALPHA">NO</Value> <Comment>Compatible to the old #defines</Comment> </Pragma> <History> <Date Day="7" Month="1" Year="2004"/> <Author>MVJ</Author> <Comment>Initial</Comment> </History> </PragmasSection> <PrimitivesSection PrimIDType="BIT32" SAPid="157"> <Description> <Section>The following sections describe the primitives defined on the UPM SAP.</Section> </Description> <Primitive> <Description> <Section>This primitive is used by ACI's DTI manager to order DTI connection establishment or termination from UPM.</Section> </Description> <PrimDef> <Name>UPM_DTI_REQ</Name> <PrimID Direction="UPLINK" Number="0"/> <PrimUsage> <Sender>ACI</Sender> <Receiver>UPM</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>nsapi</Name> </ItemLink> <Comment>Network layer service access point identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_conn</Name> </ItemLink> <Comment>DTI connect</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_direction</Name> </ItemLink> <Comment>DTI direction</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_linkid</Name> </ItemLink> <Comment>DTI link ID</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_neighbor</Name> </ItemLink> <Comment>DTI neighbor</Comment> </PrimItem> <History> <Date Day="7" Month="1" Year="2004"/> <Author>MVJ</Author> <Comment>Initial</Comment> </History> </Primitive> <Primitive> <Description> <Section>This primitive is used by UPM to inform ACI's DTI manager that a previously ordered connection establishment/termination is complete.</Section> </Description> <PrimDef> <Name>UPM_DTI_CNF</Name> <PrimID Direction="DOWNLINK" Number="0"/> <PrimUsage> <Sender>UPM</Sender> <Receiver>ACI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_linkid</Name> </ItemLink> <Comment>DTI Link ID</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>dti_conn</Name> </ItemLink> <Comment>DTI connect</Comment> </PrimItem> <History> <Date Day="7" Month="1" Year="2004"/> <Author>MVJ</Author> <Comment>Initial</Comment> </History> </Primitive> <Primitive> <Description> <Section>This primitive is used to get information about the amount of transferred data. Parameter 'nsapi' indicates the affected nsapi. If parameter 'reset' is set to NAS_RESET, then the last values of all counters will be sent with the resulting UPM_COUNT_CNF and all counters for the affected nsapi will be set to 0. If parameter 'reset' is set to NAS_NO_RESET then then the last values of all counters will be sent with the resulting UPM_COUNT_CNF.</Section> </Description> <PrimDef> <Name>UPM_COUNT_REQ</Name> <PrimID Direction="UPLINK" Number="1"/> <PrimUsage> <Sender>ACI</Sender> <Receiver>UPM</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>nsapi</Name> </ItemLink> <Comment>network layer service access point identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>reset</Name> </ItemLink> <Comment>shall counters be reset</Comment> </PrimItem> <History> <Date Day="8" Month="1" Year="2004"/> <Author>MVJ</Author> <Comment>Initial.</Comment> </History> </Primitive> <Primitive> <Description> <Section>This primitive is used to get information about the amount of transferred data. Parameter 'nsapi' indicates the affected nsapi. Parameter 'octets_uplink' indicates the number of transferred octets uplink. Only payload without layer 2 headers is computed. Parameter 'octets_downlink' indicates the number of transferred octets downlink. Parameter 'packets_uplink' indicates the number of transferred packets uplink. Parameter 'packets_downlink' indicates the number of transferred packets downlink.</Section> </Description> <PrimDef> <Name>UPM_COUNT_CNF</Name> <PrimID Direction="DOWNLINK" Number="1"/> <PrimUsage> <Sender>UPM</Sender> <Receiver>ACI</Receiver> </PrimUsage> </PrimDef> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>nsapi</Name> </ItemLink> <Comment>network layer service access point identifier</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>octets_uplink</Name> </ItemLink> <Comment>octets uplink</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>octets_downlink</Name> </ItemLink> <Comment>octets downlink</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>packets_uplink</Name> </ItemLink> <Comment>packets uplink</Comment> </PrimItem> <PrimItem Presentation="MANDATORY"> <ItemLink> <DocName DocType="SAP">8010_137_nas_include</DocName> <Name>packets_downlink</Name> </ItemLink> <Comment>packets downlink</Comment> </PrimItem> <History> <Date Day="8" Month="1" Year="2004"/> <Author>MVJ</Author> <Comment>Initial.</Comment> </History> </Primitive> </PrimitivesSection> </SAP>