view cdg3/sap/mncc.pdf @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : mncc.pdf
;*** Creation       : Wed Mar 11 09:58:24 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : mncc
;*** Document No.   : 6147.101.96.116
;*** Document Date  : 2003-07-03
;*** Document Status: BEING_PROCESSED
;*** Document Author: HM
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:47:40 2007"
PRAGMA 	LAST_MODIFIED 	"2003-07-03"
PRAGMA 	ID_AND_VERSION 	"6147.101.96.116"
PRAGMA 	PREFIX 	MNCC 	; Prefix with 'MNCC'



CONST 	FACILITY_LEN 	251 	; Max. length of facility considering L2 constraints
CONST 	USER_LEN 	128 	; 
CONST 	MAX_CC_CALLING_NUMBER 	22 	; max. length of calling party BCD number (MT SETUP)
CONST 	MAX_CC_REDIR_NUMBER 	32 	; max. length of redirecting number (MT SETUP)
CONST 	MAX_CC_CALLED_NUMBER 	80 	; max. length of called party BCD number (MO SETUP)
CONST 	SUB_LENGTH 	20 	; 
CONST 	MAX_BC_LEN 	10 	; 
EXTERN CONST 	@p_gsmcom - CC_ORIGINATING_ENTITY@ 	CC_ORIGINATING_ENTITY 	; mask for indicating the originating entity of a cause is CC
EXTERN CONST 	@p_gsmcom - ACI_ORIGINATING_ENTITY@ 	ACI_ORIGINATING_ENTITY 	; mask for indicating the originating entity of a cause is ACI
CONST 	TI_BERLIN 	1 	; TI Berlin variant of the SAP
CONST 	MAX_CC_CAUSE_LENGTH 	30 	; Max. length of the raw cause variable



VALTAB 	VAL_ti
VAL 	0 - 6 	"ms originated identifier"
VAL 	8 - 14 	"ms terminated transaction"
VAL 	7 	TI_RES_1 	"reserved"
VAL 	15 	TI_RES_2 	"reserved"

VALTAB 	VAL_progress_desc
VAL 	1 	PROG_NO_END_TO_END_PLMN 	"call is not end-to-end PLMN/ISDN, further call progress information may be available in-band"
VAL 	2 	PROG_DEST_NON_PLMN 	"destination address in non-PLMN/ISDN"
VAL 	3 	PROG_ORIGIN_NON_PLMN 	"origination address in non-PLMN/ISDN"
VAL 	4 	PROG_RETURN_TO_PLMN 	"call has returned to the PLMN/ISDN"
VAL 	8 	PROG_INBAND_AVAIL 	"in-band information or appropriate pattern now available"
VAL 	32 	PROG_END_TO_END_PLMN 	"call is end-to-end PLMN/ISDN"
VAL 	64 	PROG_QUEUEING 	"queueing"
VAL 	254 	PROG_UNSPECIFIC 	"unspecific, used when coding standard is not equal to GSM; note that the value chosen here must not collide with any defined value of  the progress description IE of the air interface"
VAL 	255 	PROG_NOT_PRES 	"not present"

VALTAB 	VAL_fac_context
VAL 	0 	FAC_IN_ALERT 	"Facility information in ALERT message"
VAL 	1 	FAC_IN_CALL_PROCEED 	"Facility information in CALL PROCEEDING message"
VAL 	2 	FAC_IN_DISCONNECT 	"Facility information in DISCONNECT message"
VAL 	3 	FAC_IN_RELEASE 	"Facility information in RELEASE message"
VAL 	4 	FAC_IN_CONNECT 	"Facility information in CONNECT message"
VAL 	5 	FAC_IN_SETUP 	"Facility information in SETUP message"
VAL 	6 	FAC_IN_FACILITY 	"Facility information in USER INFORMATION message"
VAL 	7 	FAC_IN_RELEASE_COMP 	"Facility information in RELEASE COMPLETE message"
VAL 	8 	FAC_IN_RECALL 	"Facility information in RECALL message"

VALTAB 	VAL_info_context
VAL 	0 	USER_IN_ALERT 	"User information in ALERT message"
VAL 	1 	USER_IN_DISCONNECT 	"User information in DISCONNECT message"
VAL 	2 	USER_IN_PROGRESS 	"User information in PROGRESS message"
VAL 	3 	USER_IN_RELEASE 	"User information in RELEASE message"
VAL 	4 	USER_IN_CONNECT 	"User information in CONNECT message"
VAL 	5 	USER_IN_SETUP 	"User information in SETUP message"
VAL 	6 	USER_IN_USER 	"User information in USER INFORMATION message"

VALTAB 	VAL_pd
VAL 	16 - 63 	"reserved for other network layer or through layer 3 protocols including Rec.X.25"
VAL 	64 - 79 	"national use"
VAL 	80 - 254 	"reserved for other network through layer or layer 3 protocols including Rec.X.25"
VAL 	0 	PD_USER 	"user specific protocol"
VAL 	1 	PD_HIGH_LAYER 	"OSI high layer protocols"
VAL 	2 	PD_X244 	"X.244"
VAL 	3 	PD_SYS_MANAGE 	"reserved for system management convergence function"
VAL 	4 	PD_IA5 	"IA5 characters"
VAL 	7 	PD_V120 	"Rec.V.120 rate adaption"
VAL 	8 	PD_Q931 	"Q.931 (I.451) user-network call control messages"

VALTAB 	VAL_serv
VAL 	0 	SERV_SPEECH 	"speech"
VAL 	1 	SERV_DATA 	"data"
VAL 	255 	SERV_NOT_PRES 	"not present"

VALTAB 	VAL_cause
VAL 	0b0000010100000001 	CAUSE_UNASSIGN 	"unassigned (unallocated) number"
VAL 	0b0000010100000011 	CAUSE_NO_ROUTE 	"no route to destination"
VAL 	0b0000010100000110 	CAUSE_CHAN_UNACCEPT 	"channel unacceptable"
VAL 	0b0000010100001000 	CAUSE_BARRED 	"operator determined barring"
VAL 	0b0000010100010000 	CAUSE_CALL_CLEAR 	"normal call clearing"
VAL 	0b0000010100010001 	CAUSE_USER_BUSY 	"user busy"
VAL 	0b0000010100010010 	CAUSE_NO_RESPONSE 	"no user responding"
VAL 	0b0000010100010011 	CAUSE_ALERT_NO_ANSWER 	"user alerting, no answer"
VAL 	0b0000010100010101 	CAUSE_CALL_REJECT 	"call rejected"
VAL 	0b0000010100010110 	CAUSE_NUM_CHANGED 	"number changed"
VAL 	0b0000010100011001 	CAUSE_PREEMPTION 	"pre-emption"
VAL 	0b0000010100011010 	CAUSE_USER_CLEAR 	"non selected user clearing"
VAL 	0b0000010100011011 	CAUSE_DEST_ORDER 	"destination out of order"
VAL 	0b0000010100011100 	CAUSE_NUM_FORMAT 	"invalid number format (incomplete number)"
VAL 	0b0000010100011101 	CAUSE_FACILITY_REJECT 	"facility rejected"
VAL 	0b0000010100011110 	CAUSE_STATUS_ENQUIRY 	"response to status enquiry"
VAL 	0b0000010100011111 	CAUSE_UNSPECIFIED 	"normal, unspecified"
VAL 	0b0000010100100010 	CAUSE_NO_CHAN_AVAIL 	"no circuit / channel available"
VAL 	0b0000010100100110 	CAUSE_NETWORK_ORDER 	"network out of order"
VAL 	0b0000010100101001 	CAUSE_TEMP_FAIL 	"temporary failure"
VAL 	0b0000010100101010 	CAUSE_SWITCH_CONGEST 	"switching equipment congestion"
VAL 	0b0000010100101011 	CAUSE_INFO_DISCARD 	"access information discarded"
VAL 	0b0000010100101100 	CAUSE_REQ_CHAN_UNAVAIL 	"requested circuit / channel not available"
VAL 	0b0000010100101111 	CAUSE_RESOURCE_UNAVAIL 	"resources unavailable, unspecified"
VAL 	0b0000010100110001 	CAUSE_QOS_UNAVAIL 	"quality of service unavailable"
VAL 	0b0000010100110010 	CAUSE_FACILITY_UNSUBSCRIB 	"requested facility not subscribed"
VAL 	0b0000010100110111 	CAUSE_BARRED_IN_CUG 	"incoming calls barred within the CUG"
VAL 	0b0000010100111001 	CAUSE_BEARER_CAP_AUTHORIZ 	"bearer capability not authorized"
VAL 	0b0000010100111010 	CAUSE_BEARER_CAP_UNAVAIL 	"bearer capability not presently available"
VAL 	0b0000010100111111 	CAUSE_SERVICE_UNAVAIL 	"service or option not available, unspecified"
VAL 	0b0000010101000001 	CAUSE_BEARER_NOT_IMPLEM 	"bearer service not implemented"
VAL 	0b0000010101000100 	CAUSE_ACM_MAX 	"ACM equal or greater than ACMmax"
VAL 	0b0000010101000101 	CAUSE_FACILITY_NOT_IMPLEM 	"requested facility not implemented"
VAL 	0b0000010101000110 	CAUSE_RESTICT_BEARER_CAP 	"only restricted digital information bearer capability is available"
VAL 	0b0000010101001111 	CAUSE_SERVICE_NOT_IMPLEM 	"service or option not implemented, unspecified"
VAL 	0b0000010101010001 	CAUSE_INVALID_TI 	"invalid transaction identifier value"
VAL 	0b0000010101010111 	CAUSE_USER_NOT_IN_CUG 	"user not member of CUG"
VAL 	0b0000010101011000 	CAUSE_INCOMPAT_DEST 	"incompatible destination (originated by net)"
VAL 	0b0000010101011011 	CAUSE_INVALID_TRANS_NET 	"invalid transit network selection"
VAL 	0b0000010101011111 	CAUSE_INCORRECT_MESSAGE 	"semantically incorrect message"
VAL 	0b0000010101100000 	CAUSE_INVALID_MAND_INFO 	"invalid mandatory information"
VAL 	0b0000010101100001 	CAUSE_MESSAGE_TYPE_NOT_IMPLEM 	"message type non-existent or not implemented"
VAL 	0b0000010101100010 	CAUSE_MESSAGE_TYPE_INCOMPAT 	"message type not compatible with protocol state"
VAL 	0b0000010101100011 	CAUSE_INFO_ELEM_NOT_IMPLEM 	"information element non-existent or not implemented"
VAL 	0b0000010101100100 	CAUSE_COND_INFO_ELEM 	"conditional information element error"
VAL 	0b0000010101100101 	CAUSE_MESSAGE_INCOMPAT 	"message not compatible with protocol state"
VAL 	0b0000010101100110 	CAUSE_TIMER 	"recovery on timer expiry"
VAL 	0b0000010101101111 	CAUSE_PROTOCOL 	"protocol error, unspecified"
VAL 	0b0000010101111111 	CAUSE_INTERWORKING 	"interworking, unspecified"
VAL 	0b0100010100011101 	CAUSE_MS_FACILITY_REJECT 	"facility rejected (originated by MS)"
VAL 	0b0100010101000001 	CAUSE_MS_BEARER_NOT_IMPLEM 	"bearer service not implemented (originated by MS)"
VAL 	0b0100010101010001 	CAUSE_MS_INVALID_TI 	"invalid transaction identifier value (originated by MS)"
VAL 	0b0100010101011000 	CAUSE_MS_INCOMPAT_DEST 	"incompatible destination (originated by MS)"
VAL 	0b0100010101100000 	CAUSE_MS_INVALID_MAND_INFO 	"invalid mandatory information (originated by MS)"
VAL 	0b0100010101100100 	CAUSE_MS_COND_INFO_ELEM 	"conditional information element error (originated by MS)"
VAL 	0b0100010101100101 	CAUSE_MS_MESSAGE_INCOMPAT 	"message not compatible with protocol state (originated by MS)"
VAL 	0b0100010101100110 	CAUSE_MS_TIMER 	"recovery on timer expiry (originated by MS)"
VAL 	0b1000010100000000 	CAUSE_MODIFY_SUCCESS 	"in-call modification successfully performed, MODIFY COMPLETE message received"
VAL 	0b1000010100000010 	CAUSE_HOLD_SUCCESS 	"hold successfully performed, HOLD ACKNOWLEDGE message received"
VAL 	0b1000010100000011 	CAUSE_RETRIEVE_SUCCESS 	"retrieve successfully performed, RETRIEVE ACKNOWLEDGE message received"
VAL 	0b1000010100000100 	CAUSE_DTMF_START_SUCCESS 	"start of DTMF successfully performed, START DTMF ACKNOWLEDGE message received"
VAL 	0b1000010100000101 	CAUSE_DTMF_STOP_SUCCESS 	"stop of DTMF successfully performed, STOP DTMF ACKNOWLEDGE message received"
VAL 	0b1000010111111111 	CAUSE_NO_NET_CAUSE 	"network initiated without cause"
VAL 	0b1100010100000000 	CAUSE_SUCCESS 	"operation successfully performed (e.g. a call establishment); this cause is used only if no more specific cause applies"
VAL 	0b1100010100000001 	CAUSE_DTMF_NOT_ALLOWED 	"DTMF is currently not allowed (no speech TCH)"
VAL 	0b1100010100000010 	CAUSE_DTMF_BUFFER_FULL 	"DTMF storage buffer overflow"
VAL 	0b1100010100000011 	CAUSE_DTMF_ABORTED 	"DTMF was aborted (e.g. due to state change)"
VAL 	0b1100010100000100 	CAUSE_MAX_NO_RECALLS_REACHED 	"maximum number of recalls (CCBS) was reached"
VAL 	0b1100010100000101 	CAUSE_MAX_NO_CALLS_REACHED 	"maximum number of calls was reached"
VAL 	0b1100010100000110 	CAUSE_CHANNEL_SYNC 	"channel mode or type information (changed)"
VAL 	0b1100010100000111 	CAUSE_REEST_STARTED 	"call re-establishment started"
VAL 	0b1100010100001000 	CAUSE_REEST_FINISHED 	"call re-establishment is finished"
VAL 	0b1100010111111111 	CAUSE_NO_MS_CAUSE 	"MS initiated without cause"

VALTAB 	VAL_nd
VAL 	0 	ND_USER_SUSPEND 	"user suspended"
VAL 	1 	ND_USER_RESUME 	"user resumed"
VAL 	2 	ND_BEAR_CHANGE 	"bearer change"
VAL 	255 	ND_NOT_PRES 	"not present"

VALTAB 	VAL_tos
VAL 	0 	TOS_NSAP 	"NSAP (X.213/ISO 8348 AD2)"
VAL 	2 	TOS_USER_SPEC 	"user specified"
VAL 	255 	TOS_NOT_PRES 	"not present"

VALTAB 	VAL_odd_even
VAL 	0 	OE_EVEN 	"even number of address signals"
VAL 	1 	OE_ODD 	"odd number of address signals"

VALTAB 	VAL_key
VAL 	0x30 	DIG_0 	"digit '0'"
VAL 	0x31 	DIG_1 	"digit '1'"
VAL 	0x32 	DIG_2 	"digit '2'"
VAL 	0x33 	DIG_3 	"digit '3'"
VAL 	0x34 	DIG_4 	"digit '4'"
VAL 	0x35 	DIG_5 	"digit '5'"
VAL 	0x36 	DIG_6 	"digit '6'"
VAL 	0x37 	DIG_7 	"digit '7'"
VAL 	0x38 	DIG_8 	"digit '8'"
VAL 	0x39 	DIG_9 	"digit '9'"
VAL 	0x41 	DIG_A 	"'A'"
VAL 	0x42 	DIG_B 	"'B'"
VAL 	0x43 	DIG_C 	"'C'"
VAL 	0x44 	DIG_D 	"'D'"
VAL 	0x2A 	DIG_STAR 	"'('"
VAL 	0x23 	DIG_HASH 	"'#'"
VAL 	0x7F 	DIG_RES 	"reserved"

VALTAB 	VAL_ch_mode
VAL 	0 	CHM_SIG_ONLY 	"signalling only"
VAL 	1 	CHM_SPEECH 	"speech full rate or half rate version 1"
VAL 	33 	CHM_SPEECH_V2 	"speech full rate or half rate version 2"
VAL 	65 	CHM_SPEECH_V3 	"speech full rate or half rate version 3"
VAL 	3 	CHM_DATA_9_6 	"data 9.6 kBit/s"
VAL 	11 	CHM_DATA_4_8 	"data 4.8 kBit/s"
VAL 	19 	CHM_DATA_2_4 	"data 2.4 kBit/s"
VAL 	15 	CHM_DATA_14_4 	"data 2.4 kBit/s"

VALTAB 	VAL_ch_type
VAL 	0 	CH_SDCCH 	"SDCCH channel"
VAL 	1 	CH_TCH_F 	"TCH Fullrate"
VAL 	2 	CH_TCH_H 	"TCH Halfrate"

VALTAB 	VAL_more_data
VAL 	0 	MD_NO_MORE_DATA 	"no more data"
VAL 	1 	MD_MORE_DATA 	"more data"
VAL 	255 	MD_NOT_PRES 	"not present"

VALTAB 	VAL_prio
VAL 	0 	PRIO_NORM_CALL 	"normal call"
VAL 	1 	PRIO_EMERG_CALL 	"emergency call"

VALTAB 	VAL_clir_sup
VAL 	0 	CLR_SUP 	"CLIR suppressed"
VAL 	1 	CLR_SUP_NOT 	"CLIR not suppressed"
VAL 	0xFF 	CLR_NOT_PRES 	"CLIR not present"

VALTAB 	VAL_sig
VAL 	0 	SIG_DIAL_TONE_ON 	"dial tone on"
VAL 	1 	SIG_RING_BACK_TONE_ON 	"ring back tone on"
VAL 	2 	SIG_INT_TONE_ON 	"intercept tone on"
VAL 	3 	SIG_NET_CONG_TONE_ON 	"network congestion tone on"
VAL 	4 	SIG_BUSY_TONE_ON 	"busy tone on"
VAL 	5 	SIG_CONF_TONE_ON 	"confirm tone on"
VAL 	6 	SIG_ANS_TONE_ON 	"answer tone on"
VAL 	7 	SIG_CALL_WAIT_TONE_ON 	"call waiting tone on"
VAL 	8 	SIG_OFF_HOOK_WARN_TONE_ON 	"off-hook warning tone on"
VAL 	63 	SIG_TONES_OFF 	"tones off"
VAL 	79 	SIG_ALERT_OFF 	"alerting off"
VAL 	255 	SIG_NOT_PRES 	"not present"

VALTAB 	VAL_congest_lev
VAL 	0 	CL_RECEIVER_READY 	"receiver ready"
VAL 	15 	CL_RECEIVER_NOT_READY 	"receiver not ready"
VAL 	255 	CL_NOT_PRES 	"not present"

VALTAB 	VAL_ss_version
VAL 	0 	SS_VERSION_2 	"phase 2 service, ellipsis notation and phase 2 error handling"
VAL 	1 	SS_VERSION_3 	"SS-Protocol version 3 and phase 2 error handling"
VAL 	255 	SS_VER_NOT_PRES 	"not present"

VALTAB 	VAL_ri
VAL 	1 	RI_CIRCULAR 	"circular"
VAL 	2 	RI_FALLBACK 	"fallback"
VAL 	3 	RI_SEQUENTIAL 	"sequential"
VAL 	255 	RI_NOT_PRES 	"not present"

VALTAB 	VAL_transfer_cap
VAL 	0 	ITC_NONE 	"No ITC - i.e. 3,1 kHz Audio"
VAL 	1 	ITC_UDI 	"Unrestricted Digital"
VAL 	2 	ITC_RDI 	"Restricted Digital"

VALTAB 	VAL_parity
VAL 	0 	PARITY_ODD 	"odd parity"
VAL 	2 	PARITY_EVEN 	"even parity"
VAL 	3 	PARITY_NONE 	"no parity"
VAL 	4 	PARITY_FORCED_TO_0 	"parity forced to zero"
VAL 	5 	PARITY_FORCED_TO_1 	"parity forced to one"

VALTAB 	VAL_bearer_serv
VAL 	0 	BEARER_SERV_SYNC 	"synchronous"
VAL 	1 	BEARER_SERV_ASYNC 	"asynchronous"
VAL 	2 	BEARER_SERV_PAD_ACCESS 	"PAD access (async)"
VAL 	3 	BEARER_SERV_PACKET_ACCESS 	"packet access (sync)"
VAL 	4 	BEARER_SERV_FAX 	"fax"
VAL 	5 	BEARER_SERV_SPEECH 	"Speech"
VAL 	6 	BEARER_SERV_AUX_SPEECH 	"Auxiliary Speech"
VAL 	7 	BEARER_SERV_SPEECH_CTM 	"Speech with CTM (TTY) support"
VAL 	8 	BEARER_SERV_AUX_SPEECH_CTM 	"Auxiliary Speech CTM (TTY) support"
VAL 	255 	BEARER_SERV_NOT_PRES 	"not present"

VALTAB 	VAL_modem_type
VAL 	0 	MT_NONE 	"modem type none"
VAL 	1 	MT_V21 	"modem type V.21"
VAL 	2 	MT_V22 	"modem type V.22"
VAL 	3 	MT_V22_BIS 	"modem type V.22bis"
VAL 	4 	MT_V23 	"modem type V.23"
VAL 	5 	MT_V26_TER 	"modem type V.26ter"
VAL 	6 	MT_V32 	"modem type V.32"
VAL 	7 	MT_UNDEF 	"modem type for undefined interface"
VAL 	8 	MT_AUTOBAUD 	"modem type autobauding type 1"
VAL 	9 	MT_V32_BIS 	"modem type V.32bis"
VAL 	10 	MT_V34 	"modem type V.34"

VALTAB 	VAL_rate
VAL 	1 	UR_0_3_KBIT 	"rate : 0.3 kbit/s Recommendation X.1 and V.110"
VAL 	2 	UR_1_2_KBIT 	"rate : 1.2 kbit/s Recommendation X.1 and V.110"
VAL 	3 	UR_2_4_KBIT 	"rate : 2.4 kbit/s Recommendation X.1 and V.110"
VAL 	4 	UR_4_8_KBIT 	"rate : 4.8 kbit/s Recommendation X.1 and V.110"
VAL 	5 	UR_9_6_KBIT 	"rate : 9.6 kbit/s Recommendation X.1 and V.110"
VAL 	6 	UR_12_0_KBIT_TRANS 	"rate : 12.0 kbit/s transparent"
VAL 	7 	UR_1_2_KBIT_V23 	"rate : 1.2 kbit/s/75 bit/s Recommendation V.23, X.1,V.110."
VAL 	8 	UR_14_4_KBIT 	"rate : 14.4 kbit/s"
VAL 	255 	UR_NOT_PRES 	"not present"

VALTAB 	VAL_flow_control
VAL 	8 	INBAND_FLOW_CONTROL 	"inband flow control (ISO 6429)"
VAL 	12 	NO_FLOW_CONTROL 	"no flow control (COPnoFLCT)"
VAL 	255 	OUTBAND_FLOW_CONTROL 	"outband flow control"

VALTAB 	VAL_conn_elem
VAL 	0 	CONN_ELEM_TRANS 	"transparent"
VAL 	1 	CONN_ELEM_NON_TRANS 	"non transparent (RLP)"
VAL 	2 	CONN_ELEM_TRANS_PREF 	"both, transparent preferred"
VAL 	3 	CONN_ELEM_NON_TRANS_PREF 	"both, non transparent (RLP) preferred"
VAL 	255 	CONN_ELEM_NOT_PRES 	"not present"

VALTAB 	VAL_stop_bits
VAL 	0 	STOP_1_BIT 	"one stop bit"
VAL 	1 	STOP_2_BIT 	"two stop bits"

VALTAB 	VAL_rate_adaption
VAL 	0 	RATE_ADAPT_NONE 	"No rate adaption"
VAL 	1 	RATE_ADAPT_V110 	"Information transfer capability for ISDN Asynchronous"
VAL 	2 	RATE_ADAPT_X31 	"X.31 Flag stuffing"
VAL 	3 	RATE_ADAPT_V120 	"Information transfer capability for ISDN Synchronous"
VAL 	4 	RATE_ADAPT_H223_H245 	"H.223 and H.245"
VAL 	5 	RATE_ADAPT_PIAFS 	"PIAFS"

VALTAB 	VAL_data_bits
VAL 	0 	DATA_7_BIT 	"seven data bits"
VAL 	1 	DATA_8_BIT 	"eight data bits"

VALTAB 	VAL_diagnostic
VAL 	129 	DIAG_MOC_BAR_CUG 	"Outgoing calls barred within CUG"
VAL 	130 	DIAG_NO_CUG_SELECTED 	"No CUG selected"
VAL 	131 	DIAG_UNKNOWN_CUG_INDEX 	"Unknown CUG index"
VAL 	132 	DIAG_INCOMPAT_CUG_INDEX 	"CUG index incompatible with requested basic service"
VAL 	133 	DIAG_CUG_FAIL_UNSPEC 	"CUG call Failure unspecified"
VAL 	134 	DIAG_CLIR_NOT_SUBSCRIBED 	"CLIR not subscribed"
VAL 	135 	DIAG_CCBS_POSSIBLE 	"CCBS possible"
VAL 	136 	DIAG_CCBS_NOT_POSSIBLE 	"CCBS not possible"

VALTAB 	VAL_ss_diag
VAL 	1 	SS_DIAG_MOC_BAR_CUG 	"Outgoing calls barred within CUG"
VAL 	2 	SS_DIAG_NO_CUG_SELECTED 	"No CUG selected"
VAL 	3 	SS_DIAG_UNKNOWN_CUG_INDEX 	"Unknown CUG index"
VAL 	4 	SS_DIAG_INCOMPAT_CUG_INDEX 	"CUG index incompatible with requested basic service"
VAL 	5 	SS_DIAG_CUG_FAIL_UNSPEC 	"CUG call Failure unspecified"
VAL 	6 	SS_DIAG_CLIR_NOT_SUBSCRIBED 	"CLIR not subscribed"
VAL 	7 	SS_DIAG_CCBS_POSSIBLE 	"CCBS possible"
VAL 	8 	SS_DIAG_CCBS_NOT_POSSIBLE 	"CCBS not possible"
VAL 	255 	SS_DIAG_NOT_PROVIDED 	"Not Provided"

VALTAB 	VAL_sns_mode
VAL 	0 	SNS_MODE_VOICE 	"voice calls"
VAL 	1 	SNS_MODE_VAF_VOICE 	"voice alternating FAX, voice first"
VAL 	2 	SNS_MODE_FAX 	"FAX calls"
VAL 	3 	SNS_MODE_VAD_VOICE 	"voice alternating data, voice first"
VAL 	4 	SNS_MODE_DATA 	"data calls"
VAL 	5 	SNS_MODE_VAF_FAX 	"voice alternating FAX, FAX first"
VAL 	6 	SNS_MODE_VAD_DATA 	"voice alternating data, data first"
VAL 	7 	SNS_MODE_VFD 	"voice followed by data"

VALTAB 	VAL_dtmf_mod
VAL 	0 	DTMF_MOD_AUTO 	"automatic mode with fixed duration"
VAL 	1 	DTMF_MOD_MAN_START 	"manual mode start sending DTMF digit"
VAL 	2 	DTMF_MOD_MAN_STOP 	"manual mode stop sending DTMF digit"

VALTAB 	VAL_bc_mod
VAL 	0 	BC_MOD_CODE 	"code bearer capabilities"
VAL 	1 	BC_MOD_DECODE 	"decode bearer capabilities"

VALTAB 	VAL_rcl_type
VAL 	0 	RCL_CCBS 	"CCBS"
VAL 	1 	RCL_CCBS_1 	"treated as CCBS"
VAL 	2 	RCL_CCBS_2 	"treated as CCBS"
VAL 	3 	RCL_CCBS_3 	"treated as CCBS"
VAL 	4 	RCL_CCBS_4 	"treated as CCBS"
VAL 	5 	RCL_CCBS_5 	"treated as CCBS"
VAL 	6 	RCL_CCBS_6 	"treated as CCBS"

VALTAB 	VAL_synccs
VAL 	0 	SYNCCS_MPTY_EVENT 	"Multi party event"
VAL 	0xFFFF 	SYNCCS_NOT_PRESENT 	"Synchronization cause not present"

VALTAB 	VAL_mpty_event
VAL 	0 	MPTY_BUILD_SENT 	"BuildMPTY Invoke sent"
VAL 	1 	MPTY_BUILD_FAIL 	"BuildMPTY Invoke failed"
VAL 	2 	MPTY_BUILD_SUCCESS 	"BuildMPTY Invoke ok"
VAL 	3 	MPTY_SPLIT_SENT 	"SplitMPTY Invoke sent"
VAL 	4 	MPTY_SPLIT_FAIL 	"SplitMPTY Invoke failed"
VAL 	5 	MPTY_SPLIT_SUCCESS 	"SplitMPTY Invoke Return Result ok"
VAL 	6 	MPTY_HOLD_SENT 	"HoldMPTY Invoke sent"
VAL 	7 	MPTY_HOLD_FAIL 	"HoldMPTY Invoke failed"
VAL 	8 	MPTY_HOLD_SUCCESS 	"HoldMPTY Invoke ok"
VAL 	9 	MPTY_RETRIEVE_SENT 	"RetrieveMPTY Invoke"
VAL 	10 	MPTY_RETRIEVE_FAIL 	"RetrieveMPTY Invoke failed"
VAL 	11 	MPTY_RETRIEVE_SUCCESS 	"RetrieveMPTY Invoke Return Result ok"
VAL 	0xFF 	MPTY_NOT_PRESENT 	"Parameter not present"

VALTAB 	VAL_ctm_ena
VAL 	2 - 255 	"reserved, to be treated as CTM not supported"
VAL 	0 	CTM_DISABLED 	"CTM not supported"
VAL 	1 	CTM_ENABLED 	"CTM supported"

VALTAB 	VAL_ton
VAL 	0 	TON_UNKNOWN 	"unknown"
VAL 	1 	TON_INT_NUMB 	"international number"
VAL 	2 	TON_NAT_NUMB 	"national number"
VAL 	3 	TON_NET_SPEC_NUMB 	"network specific number"
VAL 	4 	TON_DED_ACC_SC 	"dedicated access, short code"
VAL 	255 	TON_NOT_PRES 	"type of number not present"

VALTAB 	VAL_npi
VAL 	0 	NPI_UNKNOW 	"unknown"
VAL 	1 	NPI_ISDN_TEL_NUMB_PLAN 	"ISDN/telephony numbering plan"
VAL 	3 	NPI_DATA_NUMB_PLAN 	"data numbering plan"
VAL 	4 	NPI_TELEX_NUMB_PLAN 	"telex numbering plan"
VAL 	8 	NPI_NAT_NUMB_PLAN 	"national numbering plan"
VAL 	9 	NPI_PRIV_NUMB_PLAN 	"private numbering plan"
VAL 	255 	NPI_NOT_PRES 	"numbering plan identification not present"

VALTAB 	VAL_present
VAL 	0 	PRES_PRES_ALLOW 	"presentation allowed"
VAL 	1 	PRES_PRES_REST 	"presentation restricted"
VAL 	2 	PRES_NUMB_NOT_AVAIL 	"number not available due to interworking"
VAL 	255 	PRES_NOT_PRES 	"not present"

VALTAB 	VAL_screen
VAL 	0 	SCREEN_USER_PROV_NOT_SCREEN 	"user provided, not screened"
VAL 	1 	SCREEN_USER_PROV_VER_PASS 	"user provided, verified and passed"
VAL 	2 	SCREEN_USER_PROV_VER_FAIL 	"user provided, verified and failed"
VAL 	3 	SCREEN_NET_PROV 	"network provided"
VAL 	255 	SCREEN_IND_NOT_PRES 	"not present"




VAR 	ti 	"transaction identifier" 	B

VAL 	@p_mncc - VAL_ti@ 	

VAR 	progress_desc 	"progress description" 	B

VAL 	@p_mncc - VAL_progress_desc@ 	

VAR 	fac_context 	"facility information element context" 	B

VAL 	@p_mncc - VAL_fac_context@ 	

VAR 	info_context 	"user to user message context" 	B

VAL 	@p_mncc - VAL_info_context@ 	

VAR 	pd 	"user to user protocol discriminator" 	B

VAL 	@p_mncc - VAL_pd@ 	

VAR 	c_info 	"length of user to user data" 	B


VAR 	info 	"user to user information" 	B


VAR 	serv 	"service code" 	B

VAL 	@p_mncc - VAL_serv@ 	

VAR 	cause 	"cause" 	S

VAL 	@p_mncc - VAL_cause@ 	

VAR 	nd 	"notification description" 	B

VAL 	@p_mncc - VAL_nd@ 	

VAR 	c_num 	"number of BCD digits" 	B


VAR 	num 	"bcd" 	B


VAR 	c_called_num 	"number of BCD digits" 	B


VAR 	called_num 	"bcd" 	B


VAR 	tos 	"type of subaddress" 	B

VAL 	@p_mncc - VAL_tos@ 	

VAR 	odd_even 	"odd / even indicator" 	B

VAL 	@p_mncc - VAL_odd_even@ 	

VAR 	c_subaddr 	"length of subaddress information" 	B


VAR 	subaddr 	"subaddress information" 	B


VAR 	key 	"DTMF digit" 	B

VAL 	@p_mncc - VAL_key@ 	

VAR 	ch_type 	"Channel Type" 	B

VAL 	@p_mncc - VAL_ch_type@ 	

VAR 	ch_mode 	"Channel Mode" 	B

VAL 	@p_mncc - VAL_ch_mode@ 	

VAR 	more_data 	"more data" 	B

VAL 	@p_mncc - VAL_more_data@ 	

VAR 	prio 	"priority" 	B

VAL 	@p_mncc - VAL_prio@ 	

VAR 	clir_sup 	"CLIR suppression" 	B

VAL 	@p_mncc - VAL_clir_sup@ 	

VAR 	sig 	"signal" 	B

VAL 	@p_mncc - VAL_sig@ 	

VAR 	congest_lev 	"Congestion Level" 	B

VAL 	@p_mncc - VAL_congest_lev@ 	

VAR 	ss_version 	"SS Version number" 	B

VAL 	@p_mncc - VAL_ss_version@ 	

VAR 	ri 	"repeat indicator" 	B

VAL 	@p_mncc - VAL_ri@ 	

VAR 	rate 	"user rate" 	B

VAL 	@p_mncc - VAL_rate@ 	

VAR 	bearer_serv 	"bearer service" 	B

VAL 	@p_mncc - VAL_bearer_serv@ 	

VAR 	conn_elem 	"connection element" 	B

VAL 	@p_mncc - VAL_conn_elem@ 	

VAR 	stop_bits 	"stop bits" 	B

VAL 	@p_mncc - VAL_stop_bits@ 	

VAR 	data_bits 	"data bits" 	B

VAL 	@p_mncc - VAL_data_bits@ 	

VAR 	parity 	"parity" 	B

VAL 	@p_mncc - VAL_parity@ 	

VAR 	flow_control 	"flow control" 	B

VAL 	@p_mncc - VAL_flow_control@ 	

VAR 	modem_type 	"modem type" 	B

VAL 	@p_mncc - VAL_modem_type@ 	

VAR 	rate_adaption 	"rate_adaption" 	B

VAL 	@p_mncc - VAL_rate_adaption@ 	

VAR 	transfer_cap 	"transfer_cap" 	B

VAL 	@p_mncc - VAL_transfer_cap@ 	

VAR 	l_fac 	"facility length" 	S


VAR 	o_fac 	"facility offset" 	S


VAR 	fac 	"facility content" 	B


VAR 	diagnostic 	"Diagnostic Information" 	B

VAL 	@p_mncc - VAL_diagnostic@ 	

VAR 	sns_mode 	"Single numbering scheme mode" 	B

VAL 	@p_mncc - VAL_sns_mode@ 	

VAR 	dtmf_mod 	"Mode for sending DTMF digit" 	B

VAL 	@p_mncc - VAL_dtmf_mod@ 	

VAR 	bc_mod 	"Mode for conversion of bearer capabilities" 	B

VAL 	@p_mncc - VAL_bc_mod@ 	

VAR 	bc_len 	"coded bearer cap length" 	B


VAR 	bc 	"coded bearer cap" 	B


VAR 	req_id 	"Request identifier of originator" 	B


VAR 	rcl_type 	"recall type" 	B

VAL 	@p_mncc - VAL_rcl_type@ 	

VAR 	synccs 	"Synchronization cause" 	S

VAL 	@p_mncc - VAL_synccs@ 	

VAR 	mpty_event 	"multi party event" 	B

VAL 	@p_mncc - VAL_mpty_event@ 	

VAR 	c_redir_num 	"number of BCD digits" 	B


VAR 	redir_num 	"bcd" 	B


VAR 	ctm_ena 	"CTM support send to NW in BC indicating speech" 	B

VAL 	@p_mncc - VAL_ctm_ena@ 	

VAR 	ton 	"type of number" 	B

VAL 	@p_mncc - VAL_ton@ 	

VAR 	npi 	"numbering plan identification" 	B

VAL 	@p_mncc - VAL_npi@ 	

VAR 	present 	"presentation indicator" 	B

VAL 	@p_mncc - VAL_present@ 	

VAR 	screen 	"screening indicator" 	B

VAL 	@p_mncc - VAL_screen@ 	

VAR 	ss_diag 	"Supplementary Diagnostic Element" 	B

VAL 	@p_mncc - VAL_ss_diag@ 	

VAR 	c_raw_cause 	"Number of cause bytes" 	B


VAR 	raw_cause 	"cause as received from network" 	B


VAR 	rad_chan_req 	"rad_chan_req" 	B





COMP 	user 	 "user to user data"
{
 	info_context 	 ; user to user message context
 	pd 	 ; user to user protocol discriminator
 	c_info 	 ; length of user to user data
 	info 	[USER_LEN] 	 ; user to user information
}



COMP 	calling_party 	 "calling party"
{
 	ton 	 ; type of number
 	npi 	 ; numbering plan identification
 	present 	 ; presentation indicator
 	screen 	 ; screening indicator
 	c_num 	 ; number of BCD digits
 	num 	[MAX_CC_CALLING_NUMBER] 	 ; bcd
}
TYPEDEF COMP calling_party 	connected_number 	 "connected number"



COMP 	called_party 	 "called party address"
{
 	ton 	 ; numbering type
 	npi 	 ; numbering plan
 	c_called_num 	 ; number of BCD digits
 	called_num 	[MAX_CC_CALLED_NUMBER] 	 ; bcd
}



COMP 	calling_party_sub 	 "calling party subaddress"
{
 	tos 	 ; type of subaddress
 	odd_even 	 ; odd / even indicator
 	c_subaddr 	 ; length of subaddress information
 	subaddr 	[SUB_LENGTH] 	 ; subaddress information
}
TYPEDEF COMP calling_party_sub 	called_party_sub 	 "called party subaddress"
TYPEDEF COMP calling_party_sub 	connected_number_sub 	 "connected number subaddress"
TYPEDEF COMP calling_party_sub 	redirecting_party_sub 	 "redirecting party subaddress"



COMP 	ch_info 	 "Channel using mode"
{
 	ch_type 	 ; Channel Type
 	ch_mode 	 ; Channel Mode
}



COMP 	bcpara 	 "bearer capability parameter"
{
 	rate 	 ; user rate
 	bearer_serv 	 ; bearer service
 	conn_elem 	 ; connection element
 	stop_bits 	 ; stop bits
 	data_bits 	 ; data bits
 	parity 	 ; parity
 	flow_control 	 ; flow control
 	modem_type 	 ; modem type
 	rate_adaption 	 ; rate_adaption
 	transfer_cap 	 ; transfer_cap
 	rad_chan_req 	 ; rad_chan_req
}
TYPEDEF COMP bcpara 	bcpara2 	 "bearer capability parameter"



COMP 	fac_inf 	 "facility information"
{
 	l_fac 	 ; facility length
 	o_fac 	 ; facility offset
 	fac 	[FACILITY_LEN] 	 ; facility content
}



COMP 	bcconf 	 "bearer capability configuration"
{
 	bc_len 	 ; coded bearer cap length
 	bc 	[MAX_BC_LEN] 	 ; coded bearer cap
}
TYPEDEF COMP bcconf 	bcconf2 	 "second bearer capability configuration"



COMP 	redirecting_party 	 "redirecting party address"
{
 	ton 	 ; numbering type
 	npi 	 ; numbering plan
 	present 	 ; presentation indicator
 	screen 	 ; screening indicator
 	c_redir_num 	 ; number of BCD digits
 	redir_num 	[MAX_CC_REDIR_NUMBER] 	 ; bcd
}






; MNCC_ALERT_IND 	0x8000400B
; MNCC_CALL_PROCEED_IND 	0x8001400B
; MNCC_DISCONNECT_IND 	0x8002400B
; MNCC_HOLD_CNF 	0x8003400B
; MNCC_MODIFY_CNF 	0x8004400B
; MNCC_MODIFY_IND 	0x8005400B
; MNCC_NOTIFY_IND 	0x8006400B
; MNCC_PROGRESS_IND 	0x8007400B
; MNCC_REJECT_IND 	0x8008400B
; MNCC_RELEASE_CNF 	0x8009400B
; MNCC_RELEASE_IND 	0x800A400B
; MNCC_RETRIEVE_CNF 	0x800B400B
; MNCC_SETUP_CNF 	0x800C400B
; MNCC_SETUP_COMPL_IND 	0x800D400B
; MNCC_SETUP_IND 	0x800E400B
; MNCC_START_DTMF_CNF 	0x800F400B
; MNCC_BEARER_CAP_CNF 	0x8013400B
; MNCC_SYNC_IND 	0x8010400B
; MNCC_USER_IND 	0x8011400B
; MNCC_FACILITY_IND 	0x8012400B
; MNCC_PROMPT_IND 	0x8014400B
; MNCC_RECALL_IND 	0x8015400B
; MNCC_STATUS_IND 	0x8016400B
; MNCC_SETUP_REQ 	0x8000000B
; MNCC_SETUP_RES 	0x8001000B
; MNCC_ALERT_REQ 	0x8002000B
; MNCC_DISCONNECT_REQ 	0x8003000B
; MNCC_RELEASE_REQ 	0x8004000B
; MNCC_MODIFY_REQ 	0x8005000B
; MNCC_CONFIGURE_REQ 	0x8006000B
; MNCC_NOTIFY_REQ 	0x8007000B
; MNCC_START_DTMF_REQ 	0x8008000B
; MNCC_HOLD_REQ 	0x8009000B
; MNCC_RETRIEVE_REQ 	0x800A000B
; MNCC_FACILITY_REQ 	0x800B000B
; MNCC_USER_REQ 	0x800C000B
; MNCC_BEARER_CAP_REQ 	0x800D000B
; MNCC_PROMPT_RES 	0x800E000B
; MNCC_PROMPT_REJ 	0x800F000B
; MNCC_REJECT_REQ 	0x8010000B
; MNCC_SYNC_REQ 	0x8011000B
; MNCC_STATUS_RES 	0x8012000B



PRIM 	MNCC_ALERT_IND 	0x8000400B
{
 	ti 	 ; transaction identifier
 	progress_desc 	 ; progress indicator
}






PRIM 	MNCC_CALL_PROCEED_IND 	0x8001400B
{
 	ti 	 ; transaction identifier
 	progress_desc 	 ; progress indicator
 	ri 	 ; repeat indicator
 	bcpara 	 ; bearer cap parameter
 	bcpara2 	 ; bearer cap parameter
}






PRIM 	MNCC_DISCONNECT_IND 	0x8002400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO and all those previously indicated via MNCC_DISCONNECT_REQ.
 	diagnostic 	 ; Additional cause info
 	ss_diag 	 ; Additional supplementary service diagnostic info
 	progress_desc 	 ; progress description
 	c_raw_cause 	 ; Number of cause bytes
 	raw_cause 	[MAX_CC_CAUSE_LENGTH] 	 ; cause as received from NW
}






PRIM 	MNCC_HOLD_CNF 	0x8003400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; Cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and  MNCC_CAUSE_HOLD_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE
}






PRIM 	MNCC_MODIFY_CNF 	0x8004400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and  MNCC_CAUSE_MODIFY_SUCCESS, MNCC_CAUSE_MS_TIMER.
 	c_raw_cause 	 ; Number of cause bytes
 	raw_cause 	[MAX_CC_CAUSE_LENGTH] 	 ; cause as received from NW
}






PRIM 	MNCC_MODIFY_IND 	0x8005400B
{
 	ti 	 ; transaction identifier
 	serv 	 ; service code
}






PRIM 	MNCC_NOTIFY_IND 	0x8006400B
{
 	ti 	 ; transaction identifier
 	nd 	 ; notification
}






PRIM 	MNCC_PROGRESS_IND 	0x8007400B
{
 	ti 	 ; transaction identifier
 	progress_desc 	 ; progress indicator
}






PRIM 	MNCC_REJECT_IND 	0x8008400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; reject cause; The following causes can occur within this primitive: MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND and MMCC_ERROR_IND primitives of the MMCC SAP.
}






PRIM 	MNCC_RELEASE_CNF 	0x8009400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive: all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_TIMER.
 	c_raw_cause 	 ; Number of cause bytes
 	raw_cause 	[MAX_CC_CAUSE_LENGTH] 	 ; cause as received from NW
}






PRIM 	MNCC_RELEASE_IND 	0x800A400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and MNCC_CAUSE_NO_NET_CAUSE and MNCC_CAUSE_MS_MESSAGE_INCOMPAT, MNCC_CAUSE_MS_INVALID_TI, MNCC_CAUSE_MS_BEARER_NOT_IMPLEM, MNCC_CAUSE_MS_COND_INFO_ELEM, MNCC_CAUSE_MS_INVALID_MAND_INFO, MNCC_CAUSE_MAX_NO_CALLS_REACHED, MNCC_CAUSE_MAX_NO_RECALLS_REACHED, MNCC_CAUSE_MS_INCOMPAT_DEST, MNCC_CAUSE_MS_FACILITY_REJECT, MNCC_CAUSE_MS_TIMER of 4.6 and all possible within the MMCC_RELEASE_IND (CCBS) and all causes sent by higher layers within MNCC_DISCONNECT_REQ (CCBS and when no network connection) and the MMCC_ERROR_IND primitive of the MMCC SAP.
 	c_raw_cause 	 ; Number of cause bytes
 	raw_cause 	[MAX_CC_CAUSE_LENGTH] 	 ; cause as received from NW
}






PRIM 	MNCC_RETRIEVE_CNF 	0x800B400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and  MNCC_CAUSE_RETRIEVE_SUCCESS. It is possible for the network to not add a Cause IE. In this case, cause is MNCC_CAUSE_NO_NET_CAUSE
}






PRIM 	MNCC_SETUP_CNF 	0x800C400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; (resulting) cause; The following causes can occur within this primitive:  MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER.
 	progress_desc 	 ; progress description
 	connected_number 	 ; connected number
 	connected_number_sub 	 ; connected sub address
}






PRIM 	MNCC_SETUP_COMPL_IND 	0x800D400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; (resulting) cause; The following causes can occur within this primitive:  MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_TIMER.
}






PRIM 	MNCC_SETUP_IND 	0x800E400B
{
 	ti 	 ; transaction identifier
 	ri 	 ; repeat indicator
 	bcpara 	 ; bearer cap parameter
 	bcpara2 	 ; bearer cap parameter
 	progress_desc 	 ; progress indicator
 	sig 	 ; signal
 	calling_party 	 ; calling party
 	calling_party_sub 	 ; calling party sub
 	called_party 	 ; called party
 	called_party_sub 	 ; called party sub
 	redirecting_party 	 ; redirecting party
 	redirecting_party_sub 	 ; redirecting party sub
}






PRIM 	MNCC_START_DTMF_CNF 	0x800F400B
{
 	ti 	 ; transaction identifier
 	key 	 ; keypad digit
 	cause 	 ; cause; The following causes can occur within this primitive:  all those  of 4.6 defined by the GSM standard and originated by the network, i.e. those starting with 0b00...  and MNCC_CAUSE_DTMF_NOT_ALLOWED, MNCC_CAUSE_DTMF_BUFFER_FULL, MNCC_CAUSE_DTMF_ABORTED, MNCC_CAUSE_DTMF_START_SUCCESS, MNCC_CAUSE_MS_TIMER.
 	dtmf_mod 	 ; dtmf mode
}






PRIM 	MNCC_BEARER_CAP_CNF 	0x8013400B
{
 	req_id 	 ; request id
 	bc_mod 	 ; conversion mode
 	bcconf 	 ; coded bearer cap
 	bcpara 	 ; decoded bearer cap
 	bcconf2 	 ; coded bearer cap2
 	bcpara2 	 ; decoded bearer cap2
 	cause 	 ; translation cause; The following causes can occur within this primitive:  MNCC_CAUSE_SUCCESS, MNCC_CAUSE_MS_INCOMPAT_DEST.
}






PRIM 	MNCC_SYNC_IND 	0x8010400B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; The following causes can occur within this primitive: MNCC_CAUSE_CHANNEL_SYNC, MNCC_CAUSE_REEST_STARTED, MNCC_CAUSE_REEST_FINISHED.
 	ch_info 	 ; channel mode
}






PRIM 	MNCC_USER_IND 	0x8011400B
{
 	ti 	 ; transaction identifier
 	congest_lev 	 ; congestion level
 	more_data 	 ; more data
 	user 	 ; user to user
}






PRIM 	MNCC_FACILITY_IND 	0x8012400B
{
 	ti 	 ; transaction identifier
 	fac_context 	 ; facility context
 	fac_inf 	 ; facility information
}






PRIM 	MNCC_PROMPT_IND 	0x8014400B
{
}






PRIM 	MNCC_RECALL_IND 	0x8015400B
{
 	ti 	 ; transaction identifier
 	ri 	 ; repeat indicator
 	bcpara 	 ; bearer cap parameter
 	bcpara2 	 ; bearer cap parameter
 	called_party 	 ; called party address
 	called_party_sub 	 ; called party sub
 	rcl_type 	 ; recall type
}






PRIM 	MNCC_STATUS_IND 	0x8016400B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_SETUP_REQ 	0x8000000B
{
 	ti 	 ; transaction identifier
 	prio 	 ; priority
 	ri 	 ; repeat indicator
 	bcpara 	 ; bearer cap parameter
 	bcpara2 	 ; bearer cap parameter
 	called_party 	 ; called party address
 	called_party_sub 	 ; called party sub
 	clir_sup 	 ; clir suppression
 	fac_inf 	 ; facility information
}






PRIM 	MNCC_SETUP_RES 	0x8001000B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_ALERT_REQ 	0x8002000B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_DISCONNECT_REQ 	0x8003000B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol.
 	fac_inf 	 ; facility information
 	ss_version 	 ; ss version
}






PRIM 	MNCC_RELEASE_REQ 	0x8004000B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation.
 	fac_inf 	 ; facility information
 	ss_version 	 ; ss version
}






PRIM 	MNCC_MODIFY_REQ 	0x8005000B
{
 	ti 	 ; transaction identifier
 	serv 	 ; service code
}






PRIM 	MNCC_CONFIGURE_REQ 	0x8006000B
{
 	called_party_sub 	 ; called party subaddress
 	bcpara 	 ; bearer cap parameter
 	sns_mode 	 ; single numbering mode
 	ctm_ena 	 ; CTM support enabled
}






PRIM 	MNCC_NOTIFY_REQ 	0x8007000B
{
 	ti 	 ; transaction identifier
 	nd 	 ; notification description
}






PRIM 	MNCC_START_DTMF_REQ 	0x8008000B
{
 	ti 	 ; transaction identifier
 	key 	 ; keypad digit
 	dtmf_mod 	 ; DTMF mode
}






PRIM 	MNCC_HOLD_REQ 	0x8009000B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_RETRIEVE_REQ 	0x800A000B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_FACILITY_REQ 	0x800B000B
{
 	ti 	 ; transaction identifier
 	fac_inf 	 ; facility information
 	ss_version 	 ; ss version
}






PRIM 	MNCC_USER_REQ 	0x800C000B
{
 	ti 	 ; transaction identifier
 	congest_lev 	 ; congestion level
 	more_data 	 ; more data
 	user 	 ; user to user
}






PRIM 	MNCC_BEARER_CAP_REQ 	0x800D000B
{
 	req_id 	 ; request id
 	bc_mod 	 ; conversion mode
 	bcconf 	 ; coded bearer cap
 	bcpara 	 ; decoded bearer cap
 	bcconf2 	 ; coded bearer cap2
 	bcpara2 	 ; decoded bearer cap2
}






PRIM 	MNCC_PROMPT_RES 	0x800E000B
{
 	ti 	 ; transaction identifier
}






PRIM 	MNCC_PROMPT_REJ 	0x800F000B
{
}






PRIM 	MNCC_REJECT_REQ 	0x8010000B
{
 	ti 	 ; transaction identifier
 	cause 	 ; cause; Only standard-defined, MS originated values shall be used which are in addition compliant to the CC peer to peer protocol. In addition MNCC_CAUSE_NO_MS_CAUSE could be used if compliant to the CC peer to peer protocol in the current situation.
}






PRIM 	MNCC_SYNC_REQ 	0x8011000B
{
 	synccs 	 ; synchronization cause
 	ti 	 ; transaction identifier
 	mpty_event 	 ; multi party event
}






PRIM 	MNCC_STATUS_RES 	0x8012000B
{
 	ti 	 ; transaction identifier
}