FreeCalypso > hg > fc-magnetite

view cdg3/sap/ph.pdf @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : ph.pdf
;*** Creation       : Wed Mar 11 09:58:34 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : ph
;*** Document No.   : 6147.112.01.100
;*** Document Date  : 2001-10-26
;*** Document Status: APPROVED
;*** Document Author: SBK
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:50:28 2007"
PRAGMA 	LAST_MODIFIED 	"2001-10-26"
PRAGMA 	ID_AND_VERSION 	"6147.112.01.100"



CONST 	DUMMY_PH 	0 	; Dummy, not used, needed to satisfy tool chain which requires at least one constant definition in a SAP



VALTAB 	VAL_ch_type
VAL 	0 	CH_TYPE_SACCH 	"SACCH"
VAL 	1 	CH_TYPE_SDCCH 	"SDCCH"
VAL 	2 	CH_TYPE_FACCH 	"FACCH Full Rate"
VAL 	3 	 	"reserved"
VAL 	4 	 	"reserved"
VAL 	5 	 	"reserved"
VAL 	6 	 	"reserved"
VAL 	7 	CH_TYPE_FACCH_HR 	"FACCH Half Rate"




VAR 	l2_channel 	"Layer 2 channel-type" 	B

VAL 	@p_mphc - VAL_l2_channel@ 	

VAR 	l_buf 	"length of content in bit" 	S


VAR 	o_buf 	"offset of content in bit" 	S


VAR 	buf 	"buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1;" 	B


VAR 	dummy 	"dummy not used" 	B





COMP 	sdu 	 "message unit"
{
 	l_buf 	 ; length of content in bit
 	o_buf 	 ; offset of content in bit
 	buf 	[1] 	 ; buffer content; the actual size of buf is determined and allocated at run-time and not restricted to 1;
}






; PH_READY_TO_SEND 	0x4100
; PH_DATA_REQ 	0x0100
; PH_TRACE_IND 	0x4102



PRIM 	PH_READY_TO_SEND 	0x4100
{
 	l2_channel AS ch_type 	 ; channel type
}






PRIM 	PH_DATA_REQ 	0x0100
{
 	l2_channel AS ch_type 	 ; channel type
 	dummy 	 ; dummy not used; reserved
 	sdu 	 ; message unit
}






PRIM 	PH_TRACE_IND 	0x4102
{
 	dummy 	 ; dummy not used; not used
}