FreeCalypso > hg > fc-magnetite

view cdg3/sap/udpa.pdf @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents c15047b3d00d
children
line wrap: on
line source

;********************************************************************************
;*** File           : udpa.pdf
;*** Creation       : Wed Mar 11 09:58:55 CST 2009
;*** XSLT Processor : Apache Software Foundation / http://xml.apache.org/xalan-j / supports XSLT-Ver: 1
;*** Copyright      : (c) Texas Instruments AG, Berlin Germany 2002
;********************************************************************************
;*** Document Type  : Service Access Point Specification
;*** Document Name  : udpa
;*** Document No.   : 8444.103.02.006
;*** Document Date  : 2003-08-26
;*** Document Status: BEING_PROCESSED
;*** Document Author: Jacek
;********************************************************************************



PRAGMA 	SRC_FILE_TIME 	"Thu Nov 29 09:56:38 2007"
PRAGMA 	LAST_MODIFIED 	"2003-08-26"
PRAGMA 	ID_AND_VERSION 	"8444.103.02.006"



CONST 	UDPA_ENTITY_NAME_LEN 	6 	; maximum length of entity name including NULL



VALTAB 	VAL_dti_conn
VAL 	0 	UDPA_CONNECT_DTI 	"Connect DTI2 to UDP"
VAL 	1 	UDPA_DISCONNECT_DTI 	"Disconnect DTI2 from UDP"

VALTAB 	VAL_link_id
VAL 	0 	UDPA_LINK_ID_DEFAULT 	"Default link id"

VALTAB 	VAL_dti_direction
VAL 	0 	UDPA_DTI_TO_HIGHER_LAYER 	"DTI2 used normally"
VAL 	1 	UDPA_DTI_TO_LOWER_LAYER 	"DTI2 is inverted"

VALTAB 	VAL_cmd
VAL 	0 	UDPA_CONFIG_UP 	"enable the interface"
VAL 	1 	UDPA_CONFIG_DOWN 	"disable the interface"




VAR 	dti_conn 	"DTI2 connect" 	B

VAL 	@p_udpa - VAL_dti_conn@ 	

VAR 	link_id 	"Link identifier" 	L

VAL 	@p_udpa - VAL_link_id@ 	

VAR 	dti_direction 	"DTI2 direction" 	B

VAL 	@p_udpa - VAL_dti_direction@ 	

VAR 	entity_name 	"name of an neighbour entity" 	B


VAR 	cmd 	"command" 	B

VAL 	@p_udpa - VAL_cmd@ 	







; UDPA_DTI_REQ 	0x8000003B
; UDPA_DTI_CNF 	0x8000403B
; UDPA_DTI_IND 	0x8001403B
; UDPA_CONFIG_REQ 	0x8001003B
; UDPA_CONFIG_CNF 	0x8002403B



PRIM 	UDPA_DTI_REQ 	0x8000003B
{
 	dti_conn 	 ; DTI connect
 	entity_name 	[UDPA_ENTITY_NAME_LEN] 	 ; Entity name
 	link_id 	 ; Link identifier
 	dti_direction 	 ; DTI direction
}






PRIM 	UDPA_DTI_CNF 	0x8000403B
{
 	dti_conn 	 ; DTI connect
 	link_id 	 ; Link identifier
}






PRIM 	UDPA_DTI_IND 	0x8001403B
{
 	link_id 	 ; link identifier
}






PRIM 	UDPA_CONFIG_REQ 	0x8001003B
{
 	cmd 	 ; Command
}






PRIM 	UDPA_CONFIG_CNF 	0x8002403B
{
}