FreeCalypso > hg > fc-magnetite
view scripts/config-headers-new.sh @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 92dbfa906f66 |
children | 8cf3029429f3 |
line wrap: on
line source
#!/bin/sh if [ -z "$TARGET" ] then echo "Error: TARGET= must be passed via environment" 1>&2 exit 1 fi if [ -z "$BUILD_DIR" ] then echo "Error: BUILD_DIR= must be passed via environment" 1>&2 exit 1 fi # The following vars will already be set when this script is invoked # from configure.sh in a production build, but the following defaulting logic # helps with manual invokation during development. if [ -z "$CHIPSET" ] then CHIPSET=10 fi export CHIPSET if [ -z "$DSP" ] then DSP=36 fi export DSP if [ -z "$RF" ] then RF=12 fi export RF if [ -z "$AMR" ] then AMR=1 fi export AMR if [ -z "$L1_DYN_DSP_DWNLD" ] then L1_DYN_DSP_DWNLD=1 fi export L1_DYN_DSP_DWNLD if [ -z "$L1_VOICE_MEMO_AMR" ] then L1_VOICE_MEMO_AMR=1 fi export L1_VOICE_MEMO_AMR if [ -z "$MELODY_E2" ] then MELODY_E2=1 fi export MELODY_E2 if [ -z "$SPEECH_RECO" ] then SPEECH_RECO=1 fi export SPEECH_RECO if [ -z "$GPRS" ] then GPRS=1 fi export GPRS if [ -z "$SRVC" ] then SRVC=1 fi export SRVC if [ -z "$ATP_STATE" ] then ATP_STATE=0 fi export ATP_STATE if [ -z "$FCHG_STATE" ] then FCHG_STATE=1 fi export FCHG_STATE if [ -z "$LCC_STATE" ] then LCC_STATE=0 fi export LCC_STATE if [ -z "$MKS_STATE" ] then MKS_STATE=0 fi export MKS_STATE if [ -z "$PWR_STATE" ] then PWR_STATE=0 fi export PWR_STATE if [ -z "$R2D_STATE" ] then R2D_STATE=1 fi export R2D_STATE if [ -z "$DSAMPLE_FULL_COLOR" ] then DSAMPLE_FULL_COLOR=1 fi export DSAMPLE_FULL_COLOR if [ -z "$TR_BAUD_CONFIG" ] then TR_BAUD_CONFIG=TR_BAUD_115200 fi export TR_BAUD_CONFIG # Derived settings only for the generation of *.cfg headers case "$RF" in 10) RF_FAM=10 RF_PA=0 RF_PG=0 ;; 12) RF_FAM=12 RF_PA=2 RF_PG=2 ;; *) echo "Error: RF=$RF setting not understood" 1>&2 exit 1 esac export RF_FAM RF_PA RF_PG case "$GPRS" in 0) L1_GPRS=0 PMODE=1 ;; 1) L1_GPRS=1 PMODE=2 ;; *) echo "Error: GPRS=$GPRS setting not understood" 1>&2 exit 1 esac export L1_GPRS PMODE if [ "$SRVC" != 0 ] then IDS=1 else IDS=0 fi export IDS # do it! set -e rm -rf $BUILD_DIR/config mkdir $BUILD_DIR/config helpers/cfg-hdr-gen scripts/cfg-template $BUILD_DIR/config scripts/make-rv-swe-hdr.sh > $BUILD_DIR/config/rv_swe.h cp targets/$TARGET.h $BUILD_DIR/config/fc-target.h