FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_bas.c @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 
 
#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 
#include "aci_bat.h"
#include "pwr.h"         /* see sBAT_PlusCBC() */
#include "audio.h"       /* see sBAT_PlusCLVL(), qBAT_PlusCLVL() */
#include "pcm.h"        /* see aciBatPrcsPlusCG() */

LOCAL T_ACI_BAT_RSLT aciBatPrcsPlusCG (UBYTE *rc, USHORT *le, size_t ml, CHAR *ef);

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : BAT_Z                |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT BAT_Z (T_ACI_DTI_PRC_PSI *src_infos_psi,
                             T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("BAT_Z()");

  ret=(T_ACI_BAT_RSLT)sAT_Z(src_infos_psi->srcId,0);

  return(ret);
}


/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCPAS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCPAS (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_CPAS_PAS pas;

  TRACE_FUNCTION ("sBAT_PlusCPAS()");

  /*
  *   The ACI has implemented the 'set' operation of +CPAS as a qAT function.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusCPAS(src_infos_psi->srcId,&pas);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_plus_cpas cpas_data;

    resp.ctrl_response=BAT_RES_SET_PLUS_CPAS;
    resp.response.ptr_set_plus_cpas=&cpas_data;

    /*
    *   This relies on T_BAT_plus_cpas_pas being identical to 
    *   T_ACI_CPAS_PAS. They aren't quite the same, the BAT version
    *   doesn't have a 'not present' value, but as the parameter in
    *   question is mandatory this shouldn't be a problem.
    */
    cpas_data.pas=(T_BAT_plus_cpas_pas)pas;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : BAT_ANDC             |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT BAT_ANDC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_DCD_MOD dcd;

  TRACE_FUNCTION ("BAT_ANDC()");

  /*
  *   This relies on T_BAT_andc_value being identical to 
  *   T_ACI_DCD_MOD.
  */
  dcd=(T_ACI_CFUN_FUN)cmd->params.ptr_andc->value;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_AndC(src_infos_psi->srcId,dcd);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : BAT_ANDF             |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT BAT_ANDF (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("BAT_ANDF()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_AndF(src_infos_psi->srcId,0);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCSQ         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSQ (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  UBYTE rssi;
  UBYTE ber;
  UBYTE actlevel;

  TRACE_FUNCTION ("sBAT_PlusCSQ()");

  /*
  *   The ACI has implemented the 'set' operation of +CSQ as a qAT function.
  *   There isn't a separate qAT_PlusCSQ() function, so we must use the
  *   'percent' version and ignore the extra 'actlevel' value returned.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PercentCSQ(src_infos_psi->srcId,&rssi,&ber,&actlevel);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_plus_csq csq_data;

    resp.ctrl_response=BAT_RES_SET_PLUS_CSQ;
    resp.response.ptr_set_plus_csq=&csq_data;

    csq_data.rssi=(U8)rssi;
    csq_data.ber=(U8)ber;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCSQ      |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCSQ (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  UBYTE rssi;
  UBYTE ber;
  UBYTE actlevel;

  TRACE_FUNCTION ("qBAT_PercentCSQ()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PercentCSQ(src_infos_psi->srcId,&rssi,&ber,&actlevel);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_percent_csq csq_data;

    resp.ctrl_response=BAT_RES_QUE_PERCENT_CSQ;
    resp.response.ptr_que_percent_csq=&csq_data;

    csq_data.rssi=(U8)rssi;
    csq_data.ber=(U8)ber;
    csq_data.actlevel=(U8)actlevel;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCBC         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCBC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  pwr_Status_Type powerStat;
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cbc cbc_data;

  TRACE_FUNCTION("sBAT_PlusCBC()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT. This code is adapted from the ATI function
  *   atPlusCBC().
  */

  if (pwr_GetStatus(&powerStat)!=DRV_OK)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  resp.ctrl_response=BAT_RES_SET_PLUS_CBC;
  resp.response.ptr_set_plus_cbc=&cbc_data;

  switch(powerStat.Status)
  {
    case PWR_EXTPOWER_ON:
      cbc_data.bsc=BAT_CBC_BSC_NOBATTERY;
      break;

    case PWR_CHARGER_ON:
      cbc_data.bsc=BAT_CBC_BSC_BATTERY;
      break;

    default:
      cbc_data.bsc=BAT_CBC_BSC_BATTERYPOWERED;
      break;
  }

  cbc_data.bcl=(T_BAT_plus_cbc_bcl)powerStat.ChargeLevel;

  aci_bat_send(src_infos_psi,&resp);

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCLVL        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCLVL        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  TRACE_FUNCTION ("sBAT_PlusCLVL()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */

  if (audio_SetAmplf(AUDIO_SPEAKER,(UBYTE)cmd->params.ptr_set_plus_clvl->level)!=DRV_OK)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCLVL        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCLVL        (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                            T_BAT_cmd_send    *cmd)
{
  UBYTE vol;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_clvl clvl_data;

  TRACE_FUNCTION ("qBAT_PlusCLVL()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */

  if (audio_GetAmplf(AUDIO_MICROPHONE,&vol)!=DRV_OK)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  resp.ctrl_response=BAT_RES_QUE_PLUS_CLVL;
  resp.response.ptr_que_plus_clvl=&clvl_data;

  clvl_data.level=(U8)vol;

  aci_bat_send(src_infos_psi,&resp);

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMUT        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMUT (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  UBYTE mute;

  TRACE_FUNCTION ("sBAT_PlusCMUT()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */
  mute=(cmd->params.ptr_set_plus_cmut->n==BAT_CMUT_N_ON) ? AUDIO_MUTING_ON:AUDIO_MUTING_OFF;

  if(audio_SetMute(AUDIO_MICROPHONE,mute)!=DRV_OK)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMUT        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMUT (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  UBYTE mute;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cmut cmut_data;

  TRACE_FUNCTION ("qBAT_PlusCMUT()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */

  if (audio_GetMute(AUDIO_MICROPHONE,&mute)!=DRV_OK)
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  resp.ctrl_response=BAT_RES_QUE_PLUS_CMUT;
  resp.response.ptr_que_plus_cmut=&cmut_data;

  cmut_data.n=(U8)(mute==AUDIO_MUTING_ON) ? BAT_CMUT_N_ON:BAT_CMUT_N_OFF;

  aci_bat_send(src_infos_psi,&resp);

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCSCS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCSCS (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_BAT_plus_cscs_cs cs;

  TRACE_FUNCTION ("sBAT_PlusCSCS()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */

  cs=cmd->params.ptr_set_plus_cscs->cs;

  /*
  *   As we are handling this within BAT and not forwarding it to
  *   the ACI we should check the input parameter.
  */
  if ((cs<BAT_CSCS_CS_IRA) || (cs>BAT_CSCS_CS_UCS2))
  {
    ACI_ERR_DESC(ACI_ERR_CLASS_Cme,CME_ERR_Unknown);
    return(ACI_BAT_FAIL);
  }

  aci_bat_cs_set(src_infos_psi,cs);

  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCSCS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCSCS (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cscs cscs_data;

  TRACE_FUNCTION ("qBAT_PlusCSCS()");

  /*
  *   There is no equivalent ACI function, so we must handle this
  *   within BAT.
  */

  resp.ctrl_response=BAT_RES_QUE_PLUS_CSCS;
  resp.response.ptr_que_plus_cscs=&cscs_data;

  cscs_data.cs=aci_bat_cs_get(src_infos_psi);

  aci_bat_send(src_infos_psi,&resp);
  
  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCCBS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCCBS (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  SHORT idx;

  TRACE_FUNCTION ("sBAT_PercentCCBS()");

  idx=(SHORT)cmd->params.ptr_set_percent_ccbs->idx;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCCBS(src_infos_psi->srcId,idx);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCCBS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCCBS (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  
  TRACE_FUNCTION ("qBAT_PercentCCBS()");
  
  ret=(T_ACI_BAT_RSLT)qAT_PercentCCBS(src_infos_psi->srcId);

  /*
  *   qAT_PercentCCBS() never returns AT_CMPL, so we do not send
  *   the response here.
  */

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMUX        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMUX (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_set_plus_cmux *cmux;
  
  TRACE_FUNCTION ("sBAT_PlusCMUX()");

  /*
  *   Get a pointer to the CMUX data for convenience.
  */
  cmux=cmd->params.ptr_set_plus_cmux;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT. Note that we lose
  *   'k' as it is not in the ACI.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusCMUX(
    src_infos_psi->srcId,
    (UBYTE)cmux->mode,
    (UBYTE)cmux->subset,
    (UBYTE)cmux->port_speed,
    (USHORT)cmux->n1,
    (UBYTE)cmux->t1,
    (UBYTE)cmux->n2,
    (UBYTE)cmux->t2,
    (UBYTE)cmux->t3);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMUX        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMUX (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  TRACE_FUNCTION ("qBAT_PlusCMUX()");

  /*
  *   There is no ACI equivalent.
  */
  return(ACI_BAT_CMPL);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusIPR         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusIPR (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_BD_RATE rate;

  TRACE_FUNCTION ("sBAT_PlusIPR()");

  /*
  *   This relies on T_ACI_BD_RATE and T_BAT_plus_ipr_rate being
  *   identical. In fact the BAT has an extra value, but this should
  *   not cause problems as there is a parameter check in
  *   sAT_PlusIPR().
  */
  rate=(T_ACI_BD_RATE)cmd->params.ptr_set_plus_ipr->rate;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusIPR(src_infos_psi->srcId,rate);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusIPR         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusIPR (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_ACI_BD_RATE rate;

  TRACE_FUNCTION ("qBAT_PlusIPR()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusIPR(src_infos_psi->srcId,&rate);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_plus_ipr ipr_data;

    resp.ctrl_response=BAT_RES_QUE_PLUS_IPR;
    resp.response.ptr_que_plus_ipr=&ipr_data;

    /*
    *   This relies on T_ACI_BD_RATE and T_BAT_plus_ipr_rate being
    *   identical. In fact the BAT has an extra value, but that is
    *   irrelevant in this direction.
    */
    ipr_data.rate=(T_BAT_plus_ipr_rate)rate;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusICF         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusICF (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_BS_FRM format;
  T_ACI_BS_PAR parity;

  TRACE_FUNCTION ("sBAT_PlusICF()");

  /*
  *   This relies on T_ACI_BS_FRM being identical to T_BAT_framing_format
  *   and T_ACI_BS_PAR being identical to T_BAT_framing_parity.
  */
  format=(T_ACI_BS_FRM)cmd->params.ptr_set_plus_icf->framing_format;
  parity=(T_ACI_BS_PAR)cmd->params.ptr_set_plus_icf->framing_parity;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusICF(src_infos_psi->srcId,format,parity);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusICF         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusICF (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_BS_FRM format;
  T_ACI_BS_PAR parity;

  TRACE_FUNCTION ("qBAT_PlusICF()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusICF(src_infos_psi->srcId,&format,&parity);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_plus_icf icf_data;

    resp.ctrl_response=BAT_RES_QUE_PLUS_ICF;
    resp.response.ptr_que_plus_icf=&icf_data;

    /*
    *   This relies on T_ACI_BS_FRM being identical to T_BAT_framing_format
    *   and T_ACI_BS_PAR being identical to T_BAT_framing_parity.
    */
    icf_data.framing_format=(T_BAT_framing_format)format;
    icf_data.framing_parity=(T_BAT_framing_parity)parity;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusIFC         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusIFC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_RX_FLOW_CTRL DCE_by_DTE;
  T_ACI_RX_FLOW_CTRL DTE_by_DCE;

  TRACE_FUNCTION ("sBAT_PlusIFC()");

  /*
  *   This relies on T_ACI_RX_FLOW_CONTROL being identical to both
  *   T_BAT_plus_ifc_by_te and T_BAT_plus_ifc_by_ta. Note that
  *   sAT_PlusIFC() really does use T_ACI_RX_FLOW_CTRL for both
  *   parameters even though a T_ACI_TX_FLOW_CTRL exists (they are
  *   equivalent anyway).
  */
  DCE_by_DTE=(T_ACI_RX_FLOW_CTRL)cmd->params.ptr_set_plus_ifc->by_te;
  DTE_by_DCE=(T_ACI_RX_FLOW_CTRL)cmd->params.ptr_set_plus_ifc->by_ta;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=sAT_PlusIFC(src_infos_psi->srcId,DCE_by_DTE,DTE_by_DCE);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusIFC         |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusIFC (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_RX_FLOW_CTRL DCE_by_DTE;
  T_ACI_RX_FLOW_CTRL DTE_by_DCE;

  TRACE_FUNCTION ("qBAT_PlusIFC()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusIFC(src_infos_psi->srcId,&DCE_by_DTE,&DTE_by_DCE);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_plus_ifc ifc_data;

    resp.ctrl_response=BAT_RES_QUE_PLUS_IFC;
    resp.response.ptr_que_plus_ifc=&ifc_data;

    /*
    *   This relies on T_ACI_RX_FLOW_CONTROL being identical to both
    *   T_BAT_plus_ifc_by_te and T_BAT_plus_ifc_by_ta. Note that
    *   qAT_PlusIFC() really does use T_ACI_RX_FLOW_CTRL for both
    *   parameters even though a T_ACI_TX_FLOW_CTRL exists (they are
    *   equivalent anyway).
    */
    ifc_data.by_te=(T_BAT_plus_ifc_by_te)DCE_by_DTE;
    ifc_data.by_ta=(T_BAT_plus_ifc_by_ta)DTE_by_DCE;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCCLK        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCCLK (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_RTC_DATE date;
  T_ACI_RTC_TIME time;
  int time_zone;

  TRACE_FUNCTION ("sBAT_PlusCCLK()");

  date.year=(USHORT)(cmd->params.ptr_set_plus_cclk->year+2000);
  date.month=(UBYTE)cmd->params.ptr_set_plus_cclk->month;
  date.day=(UBYTE)cmd->params.ptr_set_plus_cclk->day;
  time.hour=(UBYTE)cmd->params.ptr_set_plus_cclk->hour;
  time.minute=(UBYTE)cmd->params.ptr_set_plus_cclk->minutes;
  time.second=(UBYTE)cmd->params.ptr_set_plus_cclk->seconds;

  /*
  *   Time format and PM flag are not in the BAT message. Use the same
  *   values that the ATI does in this situation.
  */
  time.format=TIME_FORMAT_24HOUR;
  time.PM_flag=0;

  time_zone=(int)cmd->params.ptr_set_plus_cclk->time_zone;

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PlusCCLK(src_infos_psi->srcId,&date,&time,time_zone);

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCCLK        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCCLK (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_RTC_DATE date;
  T_ACI_RTC_TIME time;
  int time_zone;

  TRACE_FUNCTION ("qBAT_PlusCCLK()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)qAT_PlusCCLK(src_infos_psi->srcId,&date,&time,&time_zone);

  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_que_plus_cclk cclk_data;

    resp.ctrl_response=BAT_RES_QUE_PLUS_CCLK;
    resp.response.ptr_que_plus_cclk=&cclk_data;

    cclk_data.year=(U8)(date.year-2000);
    cclk_data.month=(U8)date.month;
    cclk_data.day=(U8)date.day;

    cclk_data.hour=(U8)time.hour;

    /*
    *   BAT only handles a 24 hour clock. So if the information arrives
    *   in 12 hour format we must convert it.
    */
    if (time.format==TIME_FORMAT_12HOUR)
    {
      if ((time.PM_flag) && (time.hour<12))
        cclk_data.hour+=12;
      else if ((time.PM_flag==0) && (time.hour==12))
        cclk_data.hour=0;
    }

    cclk_data.minutes=(U8)time.minute;
    cclk_data.seconds=(U8)time.second;

    cclk_data.time_zone=(S8)time_zone;

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCGMI        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMI(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cgmi set_cgmi_buffer;
  
  TRACE_FUNCTION ("sBAT_PlusCGMI()");

  resp.ctrl_response = BAT_RES_SET_PLUS_CGMI ;
  resp.response.ptr_set_plus_cgmi = &set_cgmi_buffer;
    
  ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmi->manufacturer, &resp.response.ptr_set_plus_cgmi->c_manufacturer, 
                                        sizeof(resp.response.ptr_set_plus_cgmi->manufacturer), EF_CGMI_ID);
  if (ret EQ ACI_BAT_CMPL)
  {
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCGMM        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMM(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cgmm set_cgmm_buffer;
  
  TRACE_FUNCTION ("sBAT_PlusCGMM()");

  resp.ctrl_response = BAT_RES_SET_PLUS_CGMM ;
  resp.response.ptr_set_plus_cgmm = &set_cgmm_buffer;
    
  ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmm->model, &resp.response.ptr_set_plus_cgmm->c_model, 
                                        sizeof(resp.response.ptr_set_plus_cgmm->model), EF_CGMM_ID);
  if (ret EQ ACI_BAT_CMPL)
  {
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCGMR        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGMR(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cgmr set_cgmr_buffer;
  
  TRACE_FUNCTION ("sBAT_PlusCGMR()");

  resp.ctrl_response = BAT_RES_SET_PLUS_CGMR ;
  resp.response.ptr_set_plus_cgmr = &set_cgmr_buffer;
    
  ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgmr->revision, &resp.response.ptr_set_plus_cgmr->c_revision, 
                                        sizeof(resp.response.ptr_set_plus_cgmr->revision), EF_CGMR_ID);
  if (ret EQ ACI_BAT_CMPL)
  {
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

GLOBAL T_ACI_BAT_RSLT sBAT_PlusCGSN(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                     T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;
  T_BAT_cmd_response resp;
  T_BAT_res_set_plus_cgsn set_cgsn_buffer;
  
  TRACE_FUNCTION ("sBAT_PlusCGSN()");

  resp.ctrl_response = BAT_RES_SET_PLUS_CGSN ;
  resp.response.ptr_set_plus_cgsn = &set_cgsn_buffer;
    
  ret = aciBatPrcsPlusCG(resp.response.ptr_set_plus_cgsn->sn, &resp.response.ptr_set_plus_cgsn->c_sn, 
                                        sizeof(resp.response.ptr_set_plus_cgsn->sn), EF_CGSN_ID);
  if (ret EQ ACI_BAT_CMPL)
  {
    aci_bat_send(src_infos_psi,&resp);
  }
  return ret;
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)              MODULE  : ACI_BAT            |
| STATE   : code                        ROUTINE : aciBatPrcsPlusCG      |
+--------------------------------------------------------------------+

  PURPOSE :
*/
LOCAL T_ACI_BAT_RSLT aciBatPrcsPlusCG (UBYTE *rc, USHORT *le, size_t ml, CHAR *ef)
{
  pcm_FileInfo_Type fileInfo;
  USHORT i;

  TRACE_FUNCTION("aciBatPrcsPlusCG()");

  if (pcm_GetFileInfo ((UBYTE* )ef, &fileInfo) NEQ DRV_OK)
  {
    cmdCmeError (CME_ERR_MemFail);
    return ACI_BAT_FAIL;
  }

  if (fileInfo.FileSize <= ml)
  {
    if (pcm_ReadFile ((UBYTE*)ef, fileInfo.FileSize,
                      (UBYTE*)rc, &fileInfo.Version) NEQ DRV_OK)
    {
      cmdCmeError (CME_ERR_MemFail);
      return ACI_BAT_FAIL;
    }

    i = 0;
    while (rc[i] NEQ 0xFF)
    {
      i++;
    }
    *le = i;
     
    return ACI_BAT_CMPL;
  }
  else 
  {
    TRACE_FUNCTION("aciBatPrcsPlusCG(): file size is larger than the defined response length!");
    cmdCmeError (CME_ERR_MemFail);
    return ACI_BAT_FAIL;
  }
}