FreeCalypso > hg > fc-magnetite

view src/aci2/aci/aci_bat_mm.c @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_BAT
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved. 
|
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  This BAT wrapper modul is ...
| 
+----------------------------------------------------------------------------- 
*/ 

#include "aci_all.h"     /* includes prim.h, which includes p_bat.h */ 
#include "aci_cmh.h"     /* prototypes of sAT_,qAT_,tAT_    */ 
#include "aci_bat_cmh.h" /* prototypes of sBAT_,qBAT_,tBAT_ */ 

#ifdef FF_ATI_BAT
#include "typedefs.h"
#include "gdd.h"
#include "bat.h"
#include "aci_bat.h"
#endif /* FF_ATI_BAT */

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
#undef  min
#define min(a,b) ((a) < (b) ? (a) : (b)) /* from gpf\inc\vcms */

GLOBAL T_ACI_BAT_RSLT sBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_plus_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};
  
  TRACE_FUNCTION ("sBAT_PlusCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_plus_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_plus_cops->oper, c_oper);
  
  ret = sAT_PlusCOPS (src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cops->mode,
                      cmd->params.ptr_set_plus_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cops cops;

  TRACE_FUNCTION ("qBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_COPS;
  resp.response.ptr_que_plus_cops = &cops;

  ret = qAT_PlusCOPS(src_infos_psi->srcId, &mode, &format, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;

  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PlusCOPS        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PlusCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_plus_cops *pTPC = resp.response.ptr_tst_plus_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PlusCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  U8   c_oper = cmd->params.ptr_set_percent_cops->c_oper;
  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  TRACE_FUNCTION ("sBAT_PercentCOPS()");

  c_oper = min(c_oper, MAX_ALPHA_OPER_LEN);

  if (cmd->params.ptr_set_percent_cops->v_oper EQ TRUE)
    memcpy(op, cmd->params.ptr_set_percent_cops->oper, c_oper);

  ret = sAT_PercentCOPS (src_infos_psi->srcId,
                         cmd->params.ptr_set_percent_cops->mode,
                         cmd->params.ptr_set_percent_cops->format, op);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : tBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT tBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_COPS_LST operLst;
  T_BAT_cmd_response resp = {0};
  T_BAT_res_tst_percent_cops *pTPC = resp.response.ptr_tst_percent_cops;

  SHORT startIdx = 0, lastIdx = 0;
  BOOL END_OF_LIST = FALSE;

  TRACE_FUNCTION ("tBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_TST_PERCENT_COPS;
  
  do
  {
    int i;

    startIdx += lastIdx;
    ret = tAT_PlusCOPS(src_infos_psi->srcId, startIdx, &lastIdx, &operLst[0]);
    if (ret NEQ ACI_BAT_CMPL)
      return (ret);
    
    for (i = 0; i < lastIdx; i++)
    {
      if ((operLst[i].status EQ COPS_STAT_NotPresent) AND (*operLst[i].numOper EQ 0))
      {
        END_OF_LIST = TRUE;
        break;
      }
      /* Fill BAT resp structs */
      pTPC->status = operLst[i].status;
      pTPC->c_short_oper = strlen(operLst[i].shortOper);
      pTPC->c_long_oper = strlen(operLst[i].longOper);
      pTPC->c_num_oper = strlen(operLst[i].numOper);

      /* Check if there is long operator name, set valid flag and store it. */
      if(pTPC->c_long_oper)
      {
        pTPC->v_long_oper = TRUE;
        strncpy((CHAR*)pTPC->long_oper, operLst[i].longOper, pTPC->c_long_oper);
      }

      /* Check if there is short operator name, set valid flag and store it. */
      if(pTPC->c_short_oper)
      {
        pTPC->v_short_oper = TRUE;
        strncpy((CHAR*)pTPC->short_oper, operLst[i].shortOper, pTPC->c_short_oper);
      }

      /* Check if there is num operator name, set valid flag and store it. */
      if(pTPC->c_num_oper)
      {
        pTPC->v_num_oper = TRUE;
        strncpy((CHAR*)pTPC->num_oper, operLst[i].numOper, pTPC->c_num_oper);
      }

      aci_bat_send(src_infos_psi, &resp);
    }
    return (ACI_BAT_CMPL);
  } while(!END_OF_LIST);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCOPS     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCOPS(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  CHAR op[MAX_ALPHA_OPER_LEN] = {0};

  T_ACI_COPS_MOD  mode = COPS_MOD_NotPresent;
  T_ACI_COPS_FRMT format = COPS_FRMT_NotPresent;
  T_ACI_COPS_SVST svrStatus = COPS_SVST_NotPresent;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_cops cops;

  TRACE_FUNCTION ("qBAT_PercentCOPS()");

  resp.ctrl_response = BAT_RES_QUE_PERCENT_COPS;
  resp.response.ptr_que_percent_cops = &cops;

  ret = qAT_PercentCOPS(src_infos_psi->srcId, &mode, &format, &svrStatus, op);

  cops.mode    = mode;
  cops.format  = format;
  cops.service = svrStatus;
  cops.c_oper  = strlen(op);
  cops.v_oper  = cops.c_oper ? TRUE : FALSE;
  
  if (cops.v_oper)
  {
    memcpy(cops.oper, op, cops.c_oper);
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PercentCREG     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PercentCREG(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_percent_creg creg;

  TRACE_FUNCTION ("qBAT_PercentCREG()");
  
  resp.ctrl_response = BAT_RES_QUE_PERCENT_CREG;
  resp.response.ptr_que_percent_creg = &creg;

  ret = qAT_PercentCREG(src_infos_psi->srcId, 
                        (T_ACI_CREG_STAT*)&creg.stat,
                        (USHORT*)&creg.lac,
                        (USHORT*)&creg.ci,
                        (T_ACI_P_CREG_GPRS_IND*)&creg.gprs_ind);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_plus_ws46_n mode = cmd->params.ptr_set_plus_ws46->n;

  TRACE_FUNCTION ("sBAT_PlusWS46()");

  ret = sAT_PlusWS46(src_infos_psi->srcId, mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusWS46        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusWS46(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ws46 ws46;

  TRACE_FUNCTION ("qBAT_PlusWS46()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_WS46;
  resp.response.ptr_que_plus_ws46 = &ws46;

  ret = qAT_PlusWS46(src_infos_psi->srcId, (T_ACI_WS46_MOD *)&ws46.n);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCHPL     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCHPL(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_ACI_OPER_NTRY oper;
  UBYTE len;
    
  TRACE_FUNCTION ("sBAT_PercentCHPL()");

  /*
  *   Call the corresponding ACI function. T_ACI_BAT_RSLT is
  *   assumed to be equivalent to T_ACI_RESULT.
  */
  ret=(T_ACI_BAT_RSLT)sAT_PercentCHPL(src_infos_psi->srcId,&oper);

  /*
  *   If the command completes, we must send a response.
  */
  if (ret==ACI_BAT_CMPL)
  {
    T_BAT_cmd_response resp;
    T_BAT_res_set_percent_chpl chpl_data;

    resp.ctrl_response=BAT_RES_SET_PERCENT_CHPL;
    resp.response.ptr_set_percent_chpl=&chpl_data;

    chpl_data.type=BAT_P_CHPL_TYPE_FROM_IMS;

    switch (cmd->params.ptr_set_percent_chpl->oprfrmt)
    {
      case BAT_P_CHPL_OPRFRMT_LONG:
        len=strlen(oper.longName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.longName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;

      case BAT_P_CHPL_OPRFRMT_SHORT:
        len=strlen(oper.shrtName);

        if (len<=BAT_MAX_CHPL_OPER_LEN)
        {
          memcpy(chpl_data.oper,oper.shrtName,len);
          chpl_data.c_oper=(U8)len;
        }
        else
        {
          return(ACI_BAT_FAIL);
        }
        break;
 
      case BAT_P_CHPL_OPRFRMT_NUMERIC:
        /*
        *   Representation of the numeric format as in the ATI.
        */
        if ((oper.mnc & 0x00F)==0xF)
          sprintf((char *)chpl_data.oper, "%03x,%02x",oper.mcc, oper.mnc >> 4);
        else
          sprintf((char *)chpl_data.oper, "%03x,%03x",oper.mcc, oper.mnc);

        chpl_data.c_oper=(U8)strlen((char *)chpl_data.oper);
        break;

      default:
        return(ACI_BAT_FAIL);
        break;
    }

    aci_bat_send(src_infos_psi,&resp);
  }

  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCTZU()");

  ret = sAT_PlusCTZU (src_infos_psi->srcId, cmd->params.ptr_set_plus_ctzu->onoff);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCTZU        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCTZU(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_ctzu ctzu;
  
  TRACE_FUNCTION ("qBAT_PlusCTZU()");
  
  resp.ctrl_response = BAT_RES_QUE_PLUS_CTZU;
  resp.response.ptr_que_plus_ctzu = &ctzu;
  ret = qAT_PlusCTZU(src_infos_psi->srcId, (T_ACI_CTZU_MODE*)&ctzu.onoff);

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCWUP     |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCWUP(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                       T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret = ACI_BAT_FAIL;

  TRACE_FUNCTION ("sBAT_PercentCWUP()");

  ret = sAT_PercentCWUP (src_infos_psi->srcId, cmd->params.ptr_set_percent_cwup->type);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PercentCTZV     |
+--------------------------------------------------------------------+

  PURPOSE : %CTZV command mode (time and date report)
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PercentCTZV (T_ACI_DTI_PRC_PSI *src_infos_psi,
                                        T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PercentCTZV()");

  ret = sAT_PercentCTZV (src_infos_psi->srcId, 
                         (T_ACI_PCTZV_MODE)cmd->params.ptr_set_percent_ctzv->mode);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  TRACE_FUNCTION ("sBAT_PlusCIND()");
  
  ret = sAT_PlusCIND( src_infos_psi->srcId,
                      cmd->params.ptr_set_plus_cind->signal_ctrl,
                      cmd->params.ptr_set_plus_cind->smsfull_ctrl);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCIND        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCIND(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cind cind;

  TRACE_FUNCTION ("qBAT_PlusCIND()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CIND;
  resp.response.ptr_que_plus_cind = &cind;

  ret = qAT_PlusCIND(src_infos_psi->srcId,
               (T_ACI_CIND_SIGNAL_TYPE*)&cind.signal, 
               (T_ACI_CIND_SMSFULL_TYPE*)&cind.smsfull); 

  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : sBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT sBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings = CMER_MODE_INVALID;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings = CMER_INDICATOR_INVALID;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings = CMER_BFR_INVALID;

  TRACE_FUNCTION ("sBAT_PlusCMER()");
  
  switch (cmd->params.ptr_set_plus_cmer->ind_option)
  {
  case BAT_CMER_IND_OPTION_LOWER:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_GREATER_EQUAL:
    ret = sAT_PlusCMER(src_infos_psi->srcId,
                       sCmerModeSettings,
                       sCmerIndicationSettings,
                       sCmerBfrSettings);
    break;

  case BAT_CMER_IND_OPTION_NOT_PRESENT:
  default:
    return ACI_BAT_FAIL;
    break;
  }
  return(ret);
}

/*
+--------------------------------------------------------------------+
| PROJECT : GSM-F&D (8411)            MODULE  : ACI_BAT              |
| STATE   : code                      ROUTINE : qBAT_PlusCMER        |
+--------------------------------------------------------------------+

  PURPOSE : 
*/
GLOBAL T_ACI_BAT_RSLT qBAT_PlusCMER(T_ACI_DTI_PRC_PSI *src_infos_psi,
                                    T_BAT_cmd_send    *cmd)
{
  T_ACI_BAT_RSLT ret;
  T_BAT_cmd_response resp;
  T_BAT_res_que_plus_cmer cmer;

  T_ACI_CMER_MODE_TYPE sCmerModeSettings;
  T_ACI_CMER_IND_TYPE  sCmerIndicationSettings;
  T_ACI_CMER_BFR_TYPE  sCmerBfrSettings;

  TRACE_FUNCTION ("qBAT_PlusCMER()");

  resp.ctrl_response = BAT_RES_QUE_PLUS_CMER;
  resp.response.ptr_que_plus_cmer = &cmer;

  ret = qAT_PlusCMER(src_infos_psi->srcId,
                     &sCmerModeSettings,
                     &sCmerIndicationSettings,
                     &sCmerBfrSettings);

  switch (cmd->params.ptr_que_plus_cmer->bat_dummy)
  {
  default:
    break;
  }
  aci_bat_send(src_infos_psi, &resp);
  return(ret);
}