view src/aci2/aci/aci_io.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-F&D (8411)
|  Modul   :  ACI_CMD
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions for the AT Command Interpreter
+----------------------------------------------------------------------------- 
*/ 

#ifndef ACI_IO_H
#define ACI_IO_H


typedef enum {
    IO_DCD_OFF = 0,
    IO_DCD_ON
} T_IO_DCD_STAT;

typedef enum {
    IO_RING_OFF = 0,
    IO_RING_ON
} T_IO_RING_STAT;

typedef enum{
    ESC_DETECTION_OFF=0,
    ESC_DETECTION_ON
} T_IO_ESC_STAT;

typedef struct {
  T_IO_RING_STAT  ring_stat;
  UBYTE           b_cap_1;
  UBYTE           b_cap_2;
} T_IO_RING_PARAMS;


EXTERN void io_sendBreak    (
                              USHORT         brk_len
                            );

EXTERN void io_sendMessage  (
                              UBYTE             srcId,
                              char              *a,
                              T_ATI_OUTPUT_TYPE output_type
                            );

EXTERN void io_sendMessageEx (
                               UBYTE             srcId,
                               char              *a,
                               T_ATI_OUTPUT_TYPE output_type
                             );

EXTERN void io_sendIndication  (
                                 UBYTE             srcId,
                                 char              *a,
                                 T_ATI_OUTPUT_TYPE output_type
                               );


EXTERN void io_sendConfirm  (
                              UBYTE             srcId,
                              char              *a,
                              T_ATI_OUTPUT_TYPE output_type
                            );

EXTERN BOOL check_should_buffer_ind( T_ATI_SRC_PARAMS *src_params );
EXTERN void send_buffered_indication( T_ATI_SRC_PARAMS *src_params );

EXTERN void io_setRngInd (T_IO_RING_STAT state, T_ACI_CRING_TYP bt1, T_ACI_CRING_TYP bt2);

EXTERN void io_setDCD (T_ACI_CMD_SRC src_id, T_IO_DCD_STAT state);

EXTERN void io_setCommandState(T_ATI_SRC_PARAMS *src_params, T_ATI_LINE_STATE_TYPE line_state_type);

#endif