view src/aci2/aci/l4_tim.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 93999a60b835
children
line wrap: on
line source

/* 
+----------------------------------------------------------------------------- 
|  Project :  GSM-PS (6147)
|  Modul   :  L4_TIM
+----------------------------------------------------------------------------- 
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Definitions of timer indices
+----------------------------------------------------------------------------- 
*/ 


/*
 * Timer Indices
 */

#define SMI_TBACKLIGHT           0
#define SMI_TSLIDER              1
#define SMI_TSHIFTKEY            2
#define SMI_TUNIVERSAL           3

#define ACI_TRING                4
#define ACI_TMPTY                5
#define ACI_TFIT                 6
#define ACI_TDTMF                7

#if defined (FAX_AND_DATA)
#define FIT_RUN                  8
#endif

#define AOC_CALLTIMER            9
#define AOC_AOCTIMER             10
#define MAX_AOC_TIMER           7   /* should be changed to MAX_CALL_NR */


/* timers in between are reserved for AOC */
#define MFW_TIMER               (AOC_AOCTIMER+MAX_AOC_TIMER)

#define ACI_IPR                 (MFW_TIMER + 1)
#define ACI_TECT                (ACI_IPR + 1)
#define ACI_TDELAY              (ACI_TECT + 1)

#if defined FF_EOTD /*&& defined _SIMULATION_*/
#define ACI_LC_1                (ACI_TDELAY+1)
#define ACI_LC_2                (ACI_LC_1+1)
#define ACI_LC_3                (ACI_LC_1+2)
#define ACI_LC_4                (ACI_LC_1+3)
#define ACI_LC_5                (ACI_LC_1+4)
#endif

#ifndef FF_EOTD
#define ACI_REPEAT_HND          (ACI_TDELAY +1)
#else
#define ACI_REPEAT_HND          (ACI_LC_1+5)
#endif /* FF_EOTD */

#define ACI_CNMA_TIMER_HANDLE   (ACI_REPEAT_HND+1)

#define ACI_REPEAT_1         5000   /* 5 sec for waiting for 1th redialling */
#define ACI_REPEAT_2_4       60000  /* 1 min for waiting for 2th to 4th redialling */
#define ACI_CNMA_TIMER_VALUE 15000  /* 15 sec. for waiting for the +CNMA */
#define ACI_DELAY_TIMER      5000   /* 5 sec delay for various REDIAL attempts */