FreeCalypso > hg > fc-magnetite
view src/aci2/alr/alr_csf.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 5e39123540e6 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-PS | Modul : alr_CSF +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This Modul defines the customer specific functions. +----------------------------------------------------------------------------- */ #ifndef ALR_CSF_C #define ALR_CSF_C #define ENTITY_PL /*==== INCLUDES ===================================================*/ #include <string.h> #include <stdlib.h> #include <ctype.h> #include "typedefs.h" #include "pconst.cdg" #include "mconst.cdg" #include "message.h" #include "ccdapi.h" #include "vsi.h" #include "custom.h" #include "gsm.h" #include "prim.h" #include "cnf_alr.h" #include "mon_alr.h" #include "pei.h" #include "tok.h" #include "pcm.h" #ifdef GPRS #include "alr_gprs.h" #endif #ifdef _TMS470 #include "inth/iq.h" #include "armio/armio.h" #endif /* _TMS470 */ #include "alr.h" /*==== IMPORT =====================================================*/ /*==== EXPORT =====================================================*/ /*==== PRIVAT =====================================================*/ /*==== VARIABLES ==================================================*/ /*==== FUNCTIONS ==================================================*/ /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (8403) MODULE : alr_CSF | | STATE : code ROUTINE : csf_show_version | +--------------------------------------------------------------------+ PURPOSE : Trace Layer 1 DSP version numbers */ GLOBAL const void csf_show_version (T_TST_TEST_HW_CON *ver) { #if defined (_TMS470) USHORT build, hw, jtag, rev; /* * Retrieve hardware info and build from library */ hw = 0; build = IQ_GetBuild(); jtag = IQ_GetJtagId(); rev = IQ_GetRevision(); TRACE_EVENT_P4 ("Build=%04d HW ver=%04X, jtag=%04X, rev=%04X", build, hw, jtag, rev); if (ver) { /* * Retrieve Layer 1 info from primitive */ TRACE_EVENT_P3 ("DSP version/patch=%04X, %04x, chksum=%04X", ver->dsp_code_version, ver->dsp_patch_version, ver->dsp_checksum); TRACE_EVENT_P3 ("MCU version ALR=%04X, GPRS=%04X, TM=%04X", ver->mcu_alr_version, ver->mcu_gprs_version, ver->mcu_tm_version); PFREE (ver); } #else /* _TMS470 */ if (ver) { PFREE (ver); } #endif /* _TMS470 */ } #if !defined NTRACE /* * The following monitor capabilities are used by the Condat RT system. * They are only included in the trace version of protocol stack. /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_idle | +--------------------------------------------------------------------+ PURPOSE : traces the downlink counter values in idle mode if a change occur. */ UBYTE v_mon_counter_idle = 0; GLOBAL void trc_mon_counter_idle (UBYTE act_dlt, UBYTE max_dlt) { if (v_mon_counter_idle) { /* * only if monitoring is enabled */ PALLOC (mon_counter_idle, MON_COUNTER_IDLE_IND); mon_counter_idle->act_dlt = act_dlt; mon_counter_idle->max_dlt = max_dlt; PSENDX(RR, mon_counter_idle); } } /* +--------------------------------------------------------------------+ | PROJECT : GSM-PS (6147) MODULE : alr_CSF | | STATE : code ROUTINE : trc_mon_counter_dedi | +--------------------------------------------------------------------+ PURPOSE : traces the radiolink counter values in dedicated mode if a change occur. */ UBYTE v_mon_counter_dedi = 0; GLOBAL void trc_mon_counter_dedi (UBYTE act_rlt, UBYTE max_rlt) { if (v_mon_counter_dedi) { /* * only if monitoring is enabled */ PALLOC (mon_counter_dedi, MON_COUNTER_DEDI_IND); mon_counter_dedi->act_rlt = act_rlt; mon_counter_dedi->max_rlt = max_rlt; PSENDX(RR, mon_counter_dedi); } } #endif /* !NTRACE */ /* * Function added in FreeCalypso to support Openmoko's AT@BAND command * without making ACI include ALR header files. */ GLOBAL void alr_get_band_of_serving_cell (char *strbuf) { switch(alr_data->sc_band) { case BAND_GSM_900: strcpy(strbuf, "GSM 900"); break; case BAND_DCS_1800: strcpy(strbuf, "DCS 1800"); break; case BAND_PCS_1900: strcpy(strbuf, "PCS 1900"); break; case BAND_E_GSM: strcpy(strbuf, "EGSM"); break; case BAND_GSM_850: strcpy(strbuf, "GSM 850"); break; default: strcpy(strbuf, "Unknown"); } } #endif