FreeCalypso > hg > fc-magnetite
view src/aci2/mfw/mfw.mak @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
# # Setting Directory for Layer4 Objects # #OBJ := $(L23_OBJ_DIR)/mfw TARID := mfw$(NSRVC)$(NTK)$(NWAP)$(NBT)$(NCOMPTRC)$(NUNIC)$(NEM) OBJ := $(CONDAT_DIR)/obj/obj_$(TARID) #containing compileroptions specific for this library SPECOPT = $(FDOPT) $(MMIOPT) $(BTOPT) $(CPHSOPT) # must not be empty. set to "-D" for no local flags. #MY_OPTIONS = -D MY_OPTIONS = -DUMTS -DTARGET -D_RVF -DFF_SAT_E -DFF_2TO1_PS #INCLAYER4 = -I$(SRCMFW) -I$(SRCACI) -I$(SRCSMI) -I$(SRCKSD) $(INCBTI) INCLAYER4 = -I$(SRCMFW) -I$(SRCACI) -I$(SRCACIDTI) -I$(SRCACIEXT) -I$(SRCSMI) -I$(SRCKSD) $(INCBTI) SRCOBJ = $(MFWOBJ) SRCATB = $(CONDAT_DIR)/ms/src/atb # New editor. 1 -> Compile. 0 -> Don't compile, compile old editor. NEWED = 1 # # Sim apllication setting # ifeq ($(TK),1) COPT1 += -dSIM_TOOLKIT else COPT1 += -uSIM_TOOLKIT endif # # Support for light version # #JVJ-SPR-1298. Provisional until a new option in the .inf file is inserted. ifeq ($(SRVC),0) COPT1 += -dMMI_LITE else COPT1 += -uMMI_LITE endif #SMS PDU mode settings ifeq ($(PDU),1) COPT1 += -dSMS_PDU_SUPPORT else COPT1 += -uSMS_PDU_SUPPORT endif # # Support for UNICODE # ifeq ($(UNIC),1) COPT1 += -dNO_ASCIIZ endif # Support for MMI gprs ifeq ($(PMODE),2) COPT1 += -dMMI_GPRS_ENABLED else COPT1 += -uMMI_GPRS_ENABLED endif # # Internal Phonebook # Currently always on # #ifeq ($(INTPB),1) COPT1 += -dINT_PHONEBOOK #else #COPT1 += -uINT_PHONEBOOK #endif # # New editor (SPR#1428 - SH) # ifeq ($(NEWED),1) COPT1 += -dNEW_EDITOR else COPY1 += -uNEW_EDITOR endif # # Begin MFW # ifeq ($(TK),0) MFWOBJ := $(OBJ)/ti1_key.$(OBJ_TAIL) \ $(OBJ)/ti1_tmr.$(OBJ_TAIL) \ $(OBJ)/mfw_mfw.$(OBJ_TAIL) \ $(OBJ)/mfw_win.$(OBJ_TAIL) \ $(OBJ)/mfw_kbd.$(OBJ_TAIL) \ $(OBJ)/mfw_tim.$(OBJ_TAIL) \ $(OBJ)/mfw_mnu.$(OBJ_TAIL) \ $(OBJ)/mfw_icn.$(OBJ_TAIL) $(OBJ)/mfw_ext.$(OBJ_TAIL) \ $(OBJ)/mfw_cm.$(OBJ_TAIL) $(OBJ)/mfw_ss.$(OBJ_TAIL) \ $(OBJ)/mfw_nm.$(OBJ_TAIL) $(OBJ)/mfw_nma.$(OBJ_TAIL) \ $(OBJ)/mfw_sim.$(OBJ_TAIL) $(OBJ)/mfw_sima.$(OBJ_TAIL) \ $(OBJ)/mfw_sms.$(OBJ_TAIL) $(OBJ)/mfw_phb.$(OBJ_TAIL) \ $(OBJ)/mfw_mme.$(OBJ_TAIL) $(OBJ)/mfw_cb.$(OBJ_TAIL) \ $(OBJ)/mfw_acie.$(OBJ_TAIL) $(OBJ)/mfw_lng.$(OBJ_TAIL) \ $(OBJ)/mfw_cnvt.$(OBJ_TAIL) $(OBJ)/mfw_cphs.$(OBJ_TAIL) \ $(OBJ)/mfw_str.$(OBJ_TAIL) $(OBJ)/mfw_ffs.$(OBJ_TAIL) \ $(OBJ)/CPHS_mod.$(OBJ_TAIL) $(OBJ)/mfw_band.$(OBJ_TAIL) \ $(OBJ)/mfw_utils.$(OBJ_TAIL) $(OBJ)/mfw_aud.$(OBJ_TAIL) \ $(OBJ)/mfw_td.$(OBJ_TAIL) $(OBJ)/mfw_cam.$(OBJ_TAIL) else MFWOBJ := $(OBJ)/ti1_key.$(OBJ_TAIL) \ $(OBJ)/ti1_tmr.$(OBJ_TAIL) \ $(OBJ)/mfw_mfw.$(OBJ_TAIL) \ $(OBJ)/mfw_win.$(OBJ_TAIL) \ $(OBJ)/mfw_kbd.$(OBJ_TAIL) \ $(OBJ)/mfw_tim.$(OBJ_TAIL) \ $(OBJ)/mfw_mnu.$(OBJ_TAIL) \ $(OBJ)/mfw_icn.$(OBJ_TAIL) \ $(OBJ)/mfw_ext.$(OBJ_TAIL) \ $(OBJ)/mfw_cm.$(OBJ_TAIL) \ $(OBJ)/mfw_ss.$(OBJ_TAIL) \ $(OBJ)/mfw_nm.$(OBJ_TAIL) \ $(OBJ)/mfw_nma.$(OBJ_TAIL) \ $(OBJ)/mfw_sim.$(OBJ_TAIL) \ $(OBJ)/mfw_sima.$(OBJ_TAIL) \ $(OBJ)/mfw_sms.$(OBJ_TAIL) \ $(OBJ)/mfw_phb.$(OBJ_TAIL) \ $(OBJ)/mfw_mme.$(OBJ_TAIL) \ $(OBJ)/mfw_cb.$(OBJ_TAIL) \ $(OBJ)/mfw_acie.$(OBJ_TAIL) \ $(OBJ)/mfw_sat.$(OBJ_TAIL) \ $(OBJ)/mfw_lng.$(OBJ_TAIL) \ $(OBJ)/mfw_cnvt.$(OBJ_TAIL) \ $(OBJ)/mfw_cphs.$(OBJ_TAIL) \ $(OBJ)/mfw_str.$(OBJ_TAIL) \ $(OBJ)/mfw_ffs.$(OBJ_TAIL) \ $(OBJ)/mfw_band.$(OBJ_TAIL) \ $(OBJ)/mfw_utils.$(OBJ_TAIL) \ $(OBJ)/mfw_aud.$(OBJ_TAIL) \ $(OBJ)/mfw_td.$(OBJ_TAIL) \ # $(OBJ)/mfw_mp3test.$(OBJ_TAIL) \ # $(OBJ)/mfw_cam.$(OBJ_TAIL) endif # SH - Only compile mfw_edt if new editor is not defined ifeq ($(NEWED),0) MFWOBJ += $(OBJ)/mfw_edt.$(OBJ_TAIL) endif ifeq ($(BT),2) MFWOBJ += $(OBJ)/mfw_bt.$(OBJ_TAIL) $(OBJ)/mfw_bta.$(OBJ_TAIL) endif ifeq ($(EM),1) MFWOBJ += $(OBJ)/mfw_em.$(OBJ_TAIL) #SPR1209 endif # # Add necessary GPRS modules when GPRS is requested # ifeq ($(PMODE),2) MFWOBJ += $(OBJ)/mfw_gprs.$(OBJ_TAIL) endif # # Common files for ATB # ifeq ($(NEWED),1) MFWATBOBJ :=$(OBJ)/ATBCommon.$(OBJ_TAIL) \ $(OBJ)/ATBDisplay.$(OBJ_TAIL) endif # # New Editor # ifeq ($(NEWED),1) MFWATBOBJ += $(OBJ)/ATBEditor.$(OBJ_TAIL) endif # # Internal phonebook # Currently always on # #ifeq ($(INTPB),1) MFWATBOBJ += $(OBJ)/ATBPb.$(OBJ_TAIL) \ $(OBJ)/ATBPbGI.$(OBJ_TAIL) \ $(OBJ)/ATBPbFS.$(OBJ_TAIL) #endif # # End MFW # # # Creating mfw.lib # $(TOP_DIR)/$(MFW_LIB) : $(OBJ) $(SRCOBJ) $(MFWATBOBJ) -$(PERL) $(CONDAT_DIR)/int/bin/make_ver.pl $(AR) r $(TOP_DIR)/$(MFW_LIB) $(SRCOBJ) $(MFWATBOBJ) ver.$(OBJ_TAIL) $(OBJ): mkdir $(subst /,$(SLASH),$(OBJ)) clean: $(REMOVE) $(subst /,$(SLASH),$(OBJ)) $(MFWOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCMFW)/%.c echo -D$(NCONFIG) > cmd echo $(MY_OPTIONS) >> cmd echo -D$(NTRACE) >> cmd echo -D$(NWARN) >> cmd echo $(SPECOPT) >> cmd echo $(COPT) >> cmd echo $(COPT1) >> cmd echo $(COTAR) >> cmd echo $(FDOPT) >> cmd echo $(INCDRV1) >> cmd echo -I$(ICOM) >> cmd echo $(INCDRV2) >> cmd echo -I$(ICDG) >> cmd echo -I$(SRCATB) >> cmd echo $(INCLAYER4) >> cmd echo -I$(SRCACIEXT) >> cmd echo -I$(SRCACIDTI) >> cmd echo -fr$(OBJ) >> cmd $(CC_PRE) $^ -@cmd $(CC_INT) $(addsuffix .pp,$(basename $^)) $(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd $(MFWATBOBJ): $(OBJ)/%.$(OBJ_TAIL) : $(SRCATB)/%.c echo -D$(NCONFIG) > cmd echo $(MY_OPTIONS) >> cmd echo -D$(NTRACE) >> cmd echo -D$(NWARN) >> cmd echo $(SPECOPT) >> cmd echo $(COPT) >> cmd echo $(COPT1) >> cmd echo $(COTAR) >> cmd echo $(FDOPT) >> cmd echo $(INCDRV1) >> cmd echo -I$(ICOM) >> cmd echo $(INCDRV2) >> cmd echo -I$(ICDG) >> cmd echo -I$(SRCATB) >> cmd echo $(INCLAYER4) >> cmd echo -fr$(OBJ) >> cmd $(CC_PRE) $^ -@cmd $(CC_INT) $(addsuffix .pp,$(basename $^)) $(CC_COM) $(addsuffix .pp_,$(basename $^)) -@cmd