FreeCalypso > hg > fc-magnetite
view src/aci2/mfw/mfw_bt_op.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 93999a60b835 |
children |
line wrap: on
line source
/* +-------------------------------------------------------------------+ | PROJECT: MMI-Framework (8445) $Workfile:: mfw_bt_op.c $| | $Author:: NDH $Revision:: 1 $| | CREATED: 22.04.04 $Modtime:: 22.04.04 11:16 $| | STATE : code | +-------------------------------------------------------------------+ MODULE : MFW_BT_OP PURPOSE : This module contains the functions for MFW Bluetooth Object Push Profile */ #define ENTITY_MFW #include <string.h> #if defined (NEW_FRAME) #include "typedefs.h" #include "vsi.h" #include "pei.h" #include "custom.h" #include "gsm.h" #else #include "STDDEFS.H" #include "custom.h" #include "gsm.h" #include "vsi.h" #endif #include "bta_riviera.h" #include "mfw_bte.h" #include "mfw_bt_op.h" #include "mfw_bt_geh.h" /******************************************************************************* $Function: mfw_bt_op_init $Description: Start the OPP subsystem. $Returns: T_MFW_BT_STATUS $Arguments: none *******************************************************************************/ T_MFW_BT_STATUS mfw_bt_op_init( void ) { MFW_BT_TRACE("mfw_bt_op_init: starting the OPP BT subsystem."); return MFW_BT_SUCCESS; } /* ** MFW Bluetooth Object Push Callback Function Definitions */ /******************************************************************************* $Function: mfw_bt_opc_cb $Description: This is the Object Push Client Callback function, a pointer to it is passed to the Bluetooth Module in the BTA OPC Enable function and it is used to return information from the Bluetooth Module $Returns: None $Arguments: event : Event Id returned from the Bluetooth Module data : pointer to the relevant data returned from the Mluetooth Module *******************************************************************************/ void mfw_bt_opc_cb(T_MFW_BT_OPC_EVT event, T_MFW_BT_OPC_SIG_DATA *data) { int dataLen; T_MFW_BT_STATUS geRetVal = MFW_BT_SUCCESS; MFW_BT_TRACE("mfw_bt_opc_cb"); /* ** Set the expected data size according to the received event */ switch (event) { case BTA_OPC_ENABLE_EVT: case BTA_OPC_OPEN_EVT: dataLen = 0; break; #if 0 case BTA_OPC_PROGRESS_EVT: dataLen = sizeof(tBTA_OPC_PROGRESS); /* This structure is in the BTA interface document, but not in the header files!!! */ break; #endif case BTA_OPC_OBJECT_EVT: dataLen = sizeof(tBTA_OPC_OBJECT); break; case BTA_OPC_CLOSE_EVT: dataLen = sizeof(tBTA_OPC_STATUS); break; default: /* ** Unexpected Event, setthe data sized to -1 to exit with no further action */ MFW_BT_TRACE_P1("mfw_bt_opc_cb > Unexpected Event %d", event); dataLen = -1; } if (dataLen > 0) { /* ** Data is expected with the received signal */ if ((void *)data == (void *)0) { /* ** The data pointer is NULL, report the error */ MFW_BT_TRACE_P1("mfw_bt_opc_cb > Event : %d, Data Pointer is NULL, but data is expected", event); } else { /* ** Post the event and data to the Generic event handler */ geRetVal = mfw_bt_ge_post_event(MFW_BT_OPC, (ULONG)event, (void *)data, dataLen); } } else if (dataLen == 0) { /* ** There is no expected data with the received signal, post the event to the Generic event handler */ geRetVal = mfw_bt_ge_post_event(MFW_BT_OPC, (ULONG)event, (void *)0, 0); } if (geRetVal != MFW_BT_SUCCESS) { /* ** There is an error, but there is nothing that can be done other than to report it. */ MFW_BT_TRACE_P1("mfw_bt_opc_cb > Failed to post the event. Error %d", geRetVal); } return; } /******************************************************************************* $Function: mfw_bt_ops_cb $Description: This is the Object Push Server Callback function, a pointer to it is passed to the Bluetooth Module in the BTA OPS Enable function and it is used to return information from the Bluetooth Module $Returns: None $Arguments: event : Event Id returned from the Bluetooth Module data : pointer to the relevant data returned from the Mluetooth Module *******************************************************************************/ void mfw_bt_ops_cb(T_MFW_BT_OPS_EVT event, T_MFW_BT_OPS_SIG_DATA *data) { int dataLen; T_MFW_BT_STATUS geRetVal = MFW_BT_SUCCESS; MFW_BT_TRACE("mfw_bt_ops_cb"); /* ** Set the expected data size according to the received event */ switch (event) { case BTA_OPS_ENABLE_EVT: case BTA_OPS_OPEN_EVT: case BTA_OPS_CLOSE_EVT: dataLen = 0; break; #if 0 case BTA_OPS_PROGRESS_EVT: dataLen = sizeof(tBTA_OPS_PROGRESS); /* This structure is in the BTA interface document, but not in the header files!!! */ break; #endif case BTA_OPS_OBJECT_EVT: dataLen = sizeof(tBTA_OPS_OBJECT); break; #if 0 /* This event is in the BTA interface document, but not in the header files!!! */ case BTA_OPS_ACCESS_EVT: dataLen = sizeof(tBTA_OPS_ACCESS); /* This structure is in the BTA interface document, but not in the header files!!! */ break; #endif default: /* ** Unexpected Event, setthe data sized to -1 to exit with no further action */ MFW_BT_TRACE_P1("mfw_bt_ops_cb > Unexpected Event %d", event); dataLen = -1; } if (dataLen > 0) { /* ** Data is expected with the received signal */ if ((void *)data == (void *)0) { /* ** The data pointer is NULL, report the error */ MFW_BT_TRACE_P1("mfw_bt_ops_cb > Event : %d, Data Pointer is NULL, but data is expected", event); } else { /* ** Post the event and data to the Generic event handler */ geRetVal = mfw_bt_ge_post_event(MFW_BT_OPS, (ULONG)event, (void *)data, dataLen); } } else if (dataLen == 0) { /* ** There is no expected data with the received signal, post the event to the Generic event handler */ geRetVal = mfw_bt_ge_post_event(MFW_BT_OPS, (ULONG)event, (void *)0, 0); } if (geRetVal != MFW_BT_SUCCESS) { /* ** There is an error, but there is nothing that can be done other than to report it. */ MFW_BT_TRACE_P1("mfw_bt_ops_cb > Failed to post the event. Error %d", geRetVal); } return; } /* ** MFW Bluetooth Object Push Signal Handler Function Definitions */ /******************************************************************************* $Function: mfw_bt_opc_hndlr $Description: This function recieves the BTA Object Push Client events from the Generic Event Handler and either processes them in their entirety or passes them to the MMI for further processing. $Returns: None $Arguments: event : Event Id returned from the Bluetooth Module data : pointer to the relevant data returned from the Mluetooth Module *******************************************************************************/ T_MFW_BT_STATUS mfw_bt_opc_hndlr (T_MFW_BT_OPC_EVT event, T_MFW_BT_OPC_SIG_DATA *data) { T_MFW_BT_STATUS retVal = MFW_BT_SUCCESS; MFW_BT_TRACE("mfw_bt_opc_hndlr"); switch (event) { case BTA_OPC_ENABLE_EVT: MFW_BT_TRACE("mfw_bt_opc_hndlr > BTA_OPC_ENABLE_EVT event received"); break; case BTA_OPC_OPEN_EVT: MFW_BT_TRACE("mfw_bt_opc_hndlr > BTA_OPC_OPEN_EVT event received"); break; case BTA_OPC_PROGRESS_EVT: MFW_BT_TRACE("mfw_bt_opc_hndlr > BTA_OPC_PROGRESS_EVT event received"); break; case BTA_OPC_OBJECT_EVT: MFW_BT_TRACE("mfw_bt_opc_hndlr > BTA_OPC_OBJECT_EVT event received"); break; case BTA_OPC_CLOSE_EVT: MFW_BT_TRACE("mfw_bt_opc_hndlr > BTA_OPC_CLOSE_EVT event received"); break; default: /* ** Unexpected Event, setthe data sized to -1 to exit with no further action */ MFW_BT_TRACE_P1("mfw_bt_opc_hndlr > Unexpected Event %d", event); retVal = MFW_BT_INVALID_EVENT; } return retVal; } /******************************************************************************* $Function: mfw_bt_ops_hndlr $Description: This function recieves the BTA Object Push Server events from the Generic Event Handler and either processes them in their entirety or passes them to the MMI for further processing. $Returns: None $Arguments: event : Event Id returned from the Bluetooth Module data : pointer to the relevant data returned from the Mluetooth Module *******************************************************************************/ T_MFW_BT_STATUS mfw_bt_ops_hndlr (T_MFW_BT_OPS_EVT event, T_MFW_BT_OPS_SIG_DATA *data) { T_MFW_BT_STATUS retVal = MFW_BT_SUCCESS; MFW_BT_TRACE("mfw_bt_ops_hndlr"); switch (event) { case BTA_OPS_ENABLE_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > BTA_OPS_ENABLE_EVT event received"); break; case BTA_OPS_OPEN_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > BTA_OPS_OPEN_EVT event received"); break; case BTA_OPS_CLOSE_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > BTA_OPS_CLOSE_EVT event received"); break; case BTA_OPS_PROGRESS_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > BTA_OPS_PROGRESS_EVT event received"); break; case BTA_OPS_OBJECT_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > BTA_OPS_OBJECT_EVT event received"); break; #if 0 /* This event is in the BTA interface document, but not in the header files!!! */ case BTA_OPS_ACCESS_EVT: MFW_BT_TRACE("mfw_bt_ops_hndlr > event received"); break; #endif default: /* ** Unexpected Event, setthe data sized to -1 to exit with no further action */ MFW_BT_TRACE_P1("mfw_bt_ops_hndlr > Unexpected Event %d", event); retVal = MFW_BT_INVALID_EVENT; } return retVal; }