FreeCalypso > hg > fc-magnetite
view src/condat2/com/include/sec_drv.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 93999a60b835 |
| children |
line wrap: on
line source
#ifndef _SEC_DRV_H_ #define _SEC_DRV_H_ /******************************************* Constants *******************************************/ /* * Maximum size of category body */ #define SEC_DRV_CAT_MAX_SIZE 256 /* MUST be 8-aligned! */ /* * Defines for the first 6 lock-categories */ enum E_SEC_DRV_CAT_NUM { SEC_DRV_CAT_NUM_NW = 0, SEC_DRV_CAT_NUM_NS, SEC_DRV_CAT_NUM_SP, SEC_DRV_CAT_NUM_CP, SEC_DRV_CAT_NUM_SIM, SEC_DRV_CAT_NUM_AP }; /* * Define of the different flags that may be * set in the MEPD configuration */ enum E_SEC_DRV_CONF_FLAG { SEC_DRV_HDR_FLAG_Truncation = 0x0004, SEC_DRV_HDR_FLAG_ETSI_Flag = 0x0008, SEC_DRV_HDR_FLAG_Spec_Lock_Key = 0x0010, SEC_DRV_HDR_FLAG_LAM_Unlock = 0x0020, SEC_DRV_HDR_FLAG_No_SIM_Unlock = 0x0040, SEC_DRV_HDR_FLAG_Airtel_Ind = 0x0080, SEC_DRV_HDR_FLAG_Unlock_Timer = 0x0100 }; /* * Status defines for the different * lock-categories */ enum E_SEC_DRV_CAT_STATUS { SEC_DRV_CAT_STAT_Unlocked = 0, SEC_DRV_CAT_STAT_PermUnlocked, SEC_DRV_CAT_STAT_Locked }; /* * Different flags for the lock-categories */ enum E_SEC_DRV_CAT_FLAG { SEC_DRV_CAT_FLAG_LinkLocked = 0x01, /* if the category is dependent on a parent. Disable locking/unlocking on its own! */ SEC_DRV_CAT_FLAG_UseSeed = 0x02 /* Use seed to generate key during first boot */ }; /******************************************* Type definitions *******************************************/ /* * Possible return values for the diff. functions. */ typedef enum { SEC_DRV_RET_NotPresent = -1, SEC_DRV_RET_Ok = 0, SEC_DRV_RET_KeyMismatch = 1, SEC_DRV_RET_KeyWrong = 2, SEC_DRV_RET_FCExeeded = 3, SEC_DRV_RET_Unknown = 4 } T_SEC_DRV_RETURN; /* * Lock types for sec_rec_Unlock */ typedef enum { TEMPORARY_UNLOCK, PERMANENT_UNLOCK } T_SEC_DRV_UNLOCK_TYPE; /* * MEPD Configuration. * Only read-access to this structure is provided. * * This is a read only structure for the client (ACI layer) */ typedef struct { UINT16 Flags; /* See E_SEC_DRV_CONF_FLAG */ UINT16 AddNewIMSI; /* Handled by ACI Layer */ UINT8 NumCategories; UINT8 FC_Max; /* Failure Counter maximum */ UINT8 FC_Current; /* Current value of the Failure Counter */ UINT8 FC_Key_Length; UINT8 FC_Reset_Fail_Max; UINT8 FC_Reset_Fail_Current; UINT8 FC_Reset_Success_Max; UINT8 FC_Reset_Success_Current; UINT8 MNC_Len; /* Handled by ACI Layer */ UINT8 GID1_Len; /* Handled by ACI Layer */ UINT8 GID2_Len; /* Handled by ACI Layer */ UINT8 TypeAprovalSIM; /* Handled by ACI Layer */ UINT8 TestCPHS; /* Handled by ACI Layer */ } T_SEC_DRV_CONFIGURATION; /* * Header part for a lock-category * * This is a read only structure for the client (ACI layer) */ typedef struct { UINT8 Status; /* see E_SEC_DRV_CAT_STATUS */ UINT8 Flags; /* see E_SEC_DRV_CAT_FLAG */ UINT16 Dependency; UINT16 DataLen; UINT8 KeyLength; } T_SEC_DRV_CAT_HDR; /* * MEPD Category. */ typedef struct { T_SEC_DRV_CAT_HDR Header; void *pBody; /* pointer to array of client data */ } T_SEC_DRV_CATEGORY; /******************************************* Prototypes *******************************************/ /* sec_get_imei... missing! use cl_get_imei in comlib instead */ extern T_SEC_DRV_RETURN sec_get_CFG(T_SEC_DRV_CONFIGURATION **ppConfiguration); extern T_SEC_DRV_RETURN sec_cmp_KEY(UINT8 rec_num, const char *pKey, UINT8 key_len); extern T_SEC_DRV_RETURN sec_set_KEY(UINT8 rec_num, const char *pOldKey, const char *pNewKey, UINT8 key_len); extern T_SEC_DRV_RETURN sec_set_FC_KEY(const char *pOldKey, const char *pNewKey); extern T_SEC_DRV_RETURN sec_get_REC(UINT8 rec_num, T_SEC_DRV_CATEGORY **ppCategory); extern T_SEC_DRV_RETURN sec_set_REC(UINT8 rec_num, const T_SEC_DRV_CATEGORY *pCategory); extern T_SEC_DRV_RETURN sec_rec_Unlock(UINT8 rec_num, T_SEC_DRV_UNLOCK_TYPE unlockType, const char *pKey, UINT8 key_len, UINT16 dependMask); extern T_SEC_DRV_RETURN sec_rec_Lock(UINT8 rec_num, const char *pKey, UINT8 key_len, UINT16 dependMask); extern T_SEC_DRV_RETURN sec_FC_Reset(const char *pKey, UINT8 key_len); extern T_SEC_DRV_RETURN sec_FC_Increment(void); #endif //_SEC_DRV_H_
