FreeCalypso > hg > fc-magnetite

view src/cs/drivers/drv_app/lcc/lcc_modulate.h @ 638:cab2f315827e

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 945cf7f506b2
children
line wrap: on
line source

/******************************************************************************
 * Power Task (pwr)
 * Design and coding by Svend Kristian Lindholm, skl@ti.com
 *
 * PWR SW Modulation
 *
 * $Id: pwr_modulate.h 1.1 Wed, 20 Aug 2003 10:22:37 +0200 skl $
 *
 ******************************************************************************/
#ifndef __LCC_MODULATE_H__
#define __LCC_MODULATE_H__

#include "lcc/lcc.h"
#include "lcc/lcc_cfg.h"

// SW modulation using the following addresses
#if (USE_PWL_AS_MODULATOR == 1)
// D-Sample - no modulation - just envelope function to simulate GPIO 6
    #define PWL_LEVEL_REG (*(volatile unsigned char*) 0xFFFE8000)
    #define PWL_CTRL_REG  (*(volatile unsigned char*) 0xFFFE8001)
    #define BUZZ_LIGHT_REG (*(volatile short*) 0xFFFE480E) // Enable buzzer (bit 0) and PWL (bit 1)
#endif
/******************************************************************************
 * Function prototypes
 ******************************************************************************/

void pwr_modulate_init(void);
void pwr_modulate_on(void);
void pwr_modulate_off(void);

#endif