FreeCalypso > hg > fc-magnetite
view src/cs/layer1/audio_include/l1audio_signa.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1AUDIO_SIGNA.H * * Filename l1audio_signa.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #if (AUDIO_TASK == 1) #define P_AUDIO ( 0x18 ) // Messages MMI <-> L1A #if (KEYBEEP) #define MMI_KEYBEEP_START_REQ ( ( P_AUDIO << 8 ) | 0 ) #define MMI_KEYBEEP_STOP_REQ ( ( P_AUDIO << 8 ) | 1 ) #define MMI_KEYBEEP_START_CON ( ( P_AUDIO << 8 ) | 2 ) #define MMI_KEYBEEP_STOP_CON ( ( P_AUDIO << 8 ) | 3 ) #endif #if (TONE) #define MMI_TONE_START_REQ ( ( P_AUDIO << 8 ) | 4 ) #define MMI_TONE_STOP_REQ ( ( P_AUDIO << 8 ) | 5 ) #define MMI_TONE_START_CON ( ( P_AUDIO << 8 ) | 6 ) #define MMI_TONE_STOP_CON ( ( P_AUDIO << 8 ) | 7 ) #endif #if (MELODY_E1) #define MMI_MELODY0_START_REQ ( ( P_AUDIO << 8 ) | 8 ) #define MMI_MELODY0_STOP_REQ ( ( P_AUDIO << 8 ) | 9 ) #define MMI_MELODY0_START_CON ( ( P_AUDIO << 8 ) | 10 ) #define MMI_MELODY0_STOP_CON ( ( P_AUDIO << 8 ) | 11 ) #define MMI_MELODY1_START_REQ ( ( P_AUDIO << 8 ) | 12 ) #define MMI_MELODY1_STOP_REQ ( ( P_AUDIO << 8 ) | 13 ) #define MMI_MELODY1_START_CON ( ( P_AUDIO << 8 ) | 14 ) #define MMI_MELODY1_STOP_CON ( ( P_AUDIO << 8 ) | 15 ) #endif #if (VOICE_MEMO) #define MMI_VM_PLAY_START_REQ ( ( P_AUDIO << 8 ) | 16 ) #define MMI_VM_PLAY_STOP_REQ ( ( P_AUDIO << 8 ) | 17 ) #define MMI_VM_PLAY_START_CON ( ( P_AUDIO << 8 ) | 18 ) #define MMI_VM_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 19 ) #define MMI_VM_RECORD_START_REQ ( ( P_AUDIO << 8 ) | 20 ) #define MMI_VM_RECORD_STOP_REQ ( ( P_AUDIO << 8 ) | 21 ) #define MMI_VM_RECORD_START_CON ( ( P_AUDIO << 8 ) | 22 ) #define MMI_VM_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 23 ) #endif #if (SPEECH_RECO) #define MMI_SR_ENROLL_START_REQ ( ( P_AUDIO << 8 ) | 24 ) #define MMI_SR_ENROLL_STOP_REQ ( ( P_AUDIO << 8 ) | 25 ) #define MMI_SR_ENROLL_START_CON ( ( P_AUDIO << 8 ) | 26 ) #define MMI_SR_ENROLL_STOP_CON ( ( P_AUDIO << 8 ) | 27 ) #define MMI_SR_UPDATE_START_REQ ( ( P_AUDIO << 8 ) | 28 ) #define MMI_SR_UPDATE_STOP_REQ ( ( P_AUDIO << 8 ) | 29 ) #define MMI_SR_UPDATE_START_CON ( ( P_AUDIO << 8 ) | 30 ) #define MMI_SR_UPDATE_STOP_CON ( ( P_AUDIO << 8 ) | 31 ) #define MMI_SR_RECO_START_REQ ( ( P_AUDIO << 8 ) | 32 ) #define MMI_SR_RECO_STOP_REQ ( ( P_AUDIO << 8 ) | 33 ) #define MMI_SR_RECO_START_CON ( ( P_AUDIO << 8 ) | 34 ) #define MMI_SR_RECO_STOP_CON ( ( P_AUDIO << 8 ) | 35 ) #define MMI_SR_UPDATE_CHECK_START_REQ ( ( P_AUDIO << 8 ) | 36 ) #define MMI_SR_UPDATE_CHECK_STOP_REQ ( ( P_AUDIO << 8 ) | 37 ) #define MMI_SR_UPDATE_CHECK_START_CON ( ( P_AUDIO << 8 ) | 38 ) #define MMI_SR_UPDATE_CHECK_STOP_CON ( ( P_AUDIO << 8 ) | 39 ) #endif #if (AEC) #define MMI_AEC_REQ ( ( P_AUDIO << 8 ) | 40 ) #define MMI_AEC_CON ( ( P_AUDIO << 8 ) | 41 ) #endif #if (FIR) #define MMI_AUDIO_FIR_REQ ( ( P_AUDIO << 8 ) | 42 ) #define MMI_AUDIO_FIR_CON ( ( P_AUDIO << 8 ) | 43 ) #endif #if (AUDIO_MODE) #define MMI_AUDIO_MODE_REQ ( ( P_AUDIO << 8 ) | 44 ) #define MMI_AUDIO_MODE_CON ( ( P_AUDIO << 8 ) | 45 ) #endif #if (MELODY_E2) #define MMI_MELODY0_E2_START_REQ ( ( P_AUDIO << 8 ) | 46 ) #define MMI_MELODY0_E2_STOP_REQ ( ( P_AUDIO << 8 ) | 47 ) #define MMI_MELODY0_E2_START_CON ( ( P_AUDIO << 8 ) | 48 ) #define MMI_MELODY0_E2_STOP_CON ( ( P_AUDIO << 8 ) | 49 ) #define MMI_MELODY1_E2_START_REQ ( ( P_AUDIO << 8 ) | 50 ) #define MMI_MELODY1_E2_STOP_REQ ( ( P_AUDIO << 8 ) | 51 ) #define MMI_MELODY1_E2_START_CON ( ( P_AUDIO << 8 ) | 52 ) #define MMI_MELODY1_E2_STOP_CON ( ( P_AUDIO << 8 ) | 53 ) #endif #if (L1_VOICE_MEMO_AMR) #define MMI_VM_AMR_PLAY_START_REQ ( ( P_AUDIO << 8 ) | 54 ) #define MMI_VM_AMR_PLAY_STOP_REQ ( ( P_AUDIO << 8 ) | 55 ) #define MMI_VM_AMR_PLAY_START_CON ( ( P_AUDIO << 8 ) | 56 ) #define MMI_VM_AMR_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 57 ) #define MMI_VM_AMR_RECORD_START_REQ ( ( P_AUDIO << 8 ) | 58 ) #define MMI_VM_AMR_RECORD_STOP_REQ ( ( P_AUDIO << 8 ) | 59 ) #define MMI_VM_AMR_RECORD_START_CON ( ( P_AUDIO << 8 ) | 60 ) #define MMI_VM_AMR_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 61 ) #endif #if (L1_CPORT == 1) #define MMI_CPORT_CONFIGURE_REQ ( ( P_AUDIO << 8 ) | 62 ) #define MMI_CPORT_CONFIGURE_CON ( ( P_AUDIO << 8 ) | 63 ) #endif // Messages L1S -> L1A #if (KEYBEEP) #define L1_KEYBEEP_START_CON ( ( P_AUDIO << 8 ) | 64 ) #define L1_KEYBEEP_STOP_CON ( ( P_AUDIO << 8 ) | 65 ) #endif #if (TONE) #define L1_TONE_START_CON ( ( P_AUDIO << 8 ) | 66 ) #define L1_TONE_STOP_CON ( ( P_AUDIO << 8 ) | 67 ) #endif #if (MELODY_E1) #define L1_MELODY0_START_CON ( ( P_AUDIO << 8 ) | 68 ) #define L1_MELODY0_STOP_CON ( ( P_AUDIO << 8 ) | 69 ) #define L1_MELODY1_START_CON ( ( P_AUDIO << 8 ) | 70 ) #define L1_MELODY1_STOP_CON ( ( P_AUDIO << 8 ) | 71 ) #endif #if (VOICE_MEMO) #define L1_VM_PLAY_START_CON ( ( P_AUDIO << 8 ) | 72 ) #define L1_VM_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 73 ) #define L1_VM_RECORD_START_CON ( ( P_AUDIO << 8 ) | 74 ) #define L1_VM_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 75 ) #endif #if (SPEECH_RECO) #define L1_SR_ENROLL_START_CON ( ( P_AUDIO << 8 ) | 76 ) #define L1_SR_ENROLL_STOP_CON ( ( P_AUDIO << 8 ) | 77 ) #define L1_SR_UPDATE_START_CON ( ( P_AUDIO << 8 ) | 78 ) #define L1_SR_UPDATE_STOP_CON ( ( P_AUDIO << 8 ) | 79 ) #define L1_SR_RECO_START_CON ( ( P_AUDIO << 8 ) | 80 ) #define L1_SR_RECO_STOP_CON ( ( P_AUDIO << 8 ) | 81 ) #define L1_SR_RECO_STOP_IND ( ( P_AUDIO << 8 ) | 82 ) #define L1_SR_PROCESSING_STOP_CON ( ( P_AUDIO << 8 ) | 83 ) #endif #if (AEC) #define L1_AEC_CON ( ( P_AUDIO << 8 ) | 84 ) #define L1_AEC_IND ( ( P_AUDIO << 8 ) | 85 ) #endif #if (FIR) #define L1_AUDIO_FIR_CON ( ( P_AUDIO << 8 ) | 86 ) #endif #if (AUDIO_MODE) #define L1_AUDIO_MODE_CON ( ( P_AUDIO << 8 ) | 87 ) #endif #if (L1_VOICE_MEMO_AMR) #define L1_VM_AMR_PLAY_START_CON ( ( P_AUDIO << 8 ) | 88 ) #define L1_VM_AMR_PLAY_STOP_CON ( ( P_AUDIO << 8 ) | 89 ) #define L1_VM_AMR_RECORD_START_CON ( ( P_AUDIO << 8 ) | 90 ) #define L1_VM_AMR_RECORD_STOP_CON ( ( P_AUDIO << 8 ) | 91 ) #endif #if (L1_CPORT == 1) #define L1_CPORT_CONFIGURE_CON ( ( P_AUDIO << 8 ) | 92 ) #endif // Messages L1A <-> Audio background #if (SPEECH_RECO) #define L1_SRBACK_SAVE_DATA_REQ ( ( P_AUDIO << 8 ) | 93 ) #define L1_SRBACK_SAVE_DATA_CON ( ( P_AUDIO << 8 ) | 94 ) #define L1_SRBACK_LOAD_MODEL_REQ ( ( P_AUDIO << 8 ) | 95 ) #define L1_SRBACK_LOAD_MODEL_CON ( ( P_AUDIO << 8 ) | 96 ) #define L1_SRBACK_TEMP_SAVE_DATA_REQ ( ( P_AUDIO << 8 ) | 97 ) #define L1_SRBACK_TEMP_SAVE_DATA_CON ( ( P_AUDIO << 8 ) | 98 ) #endif #if (MELODY_E2) #define L1_BACK_MELODY_E2_LOAD_INSTRUMENT_REQ ( ( P_AUDIO << 8 ) | 99 ) #define L1_BACK_MELODY_E2_LOAD_INSTRUMENT_CON ( ( P_AUDIO << 8 ) | 100 ) #define L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_REQ ( ( P_AUDIO << 8 ) | 101 ) #define L1_BACK_MELODY_E2_UNLOAD_INSTRUMENT_CON ( ( P_AUDIO << 8 ) | 102 ) #define L1_MELODY0_E2_STOP_CON ( ( P_AUDIO << 8 ) | 103 ) #define L1_MELODY1_E2_STOP_CON ( ( P_AUDIO << 8 ) | 104 ) #endif #if (OP_RIV_AUDIO == 1) #if (L1_AUDIO_DRIVER == 1) #define L1_AUDIO_DRIVER_IND ( ( P_AUDIO << 8 ) | 105 ) #endif #endif #endif // AUDIO_TASK == 1