FreeCalypso > hg > fc-magnetite
view src/cs/layer1/gtt_include/ctm/ucs_functions.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 945cf7f506b2 |
| children |
line wrap: on
line source
/* ******************************************************************************* * * COPYRIGHT (C) 2000 BY ERICSSON EUROLAB DEUTSCHLAND GmbH * 90411 NUERNBERG, GERMANY, Tel Int + 49 911 5217 100 * * The program(s) may be used and/or copied only with the * written permission from Ericsson or in accordance * with the terms and conditions stipulated in the agreement or * contract under which the program(s) have been supplied. * ******************************************************************************* * * File : baudot_functions.h * Author : EEDN/RV Matthias Doerbecker * Tested Platforms : Windows NT 4.0 * Description : header file for ucs_functions.c * * Revision history * * $Log: $ * ******************************************************************************* */ #ifndef ucs_functions_h #define ucs_functions_h "$Id: $" /* ******************************************************************************* * INCLUDE FILES ******************************************************************************* */ #include "fifo.h" /* ******************************************************************************* * DEFINITIONS ******************************************************************************* */ /****************************************************************************/ /* convertChar2UCScode() */ /* ********************* */ /* Conversion from character into UCS code */ /* (Universal Multiple-Octet Coded Character Set, Row 00 */ /* of the Multilingual plane according to ISO/IEC 10646-1). */ /* This routine only handles characters in the range 0...255 since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - inChar charcater that shall be converted */ /* */ /* return value: UCS code of the input character */ /* or 0xFFFF in case that inChar is not valid */ /* (e.g. inChar=='\0') */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */ /****************************************************************************/ UWORD16 convertChar2UCScode(char inChar); /****************************************************************************/ /* convertUCScode2char() */ /* ********************* */ /* Conversion from UCS code into character */ /* This routine only handles characters in the range 0...255 since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - ucsCode UCS code index, */ /* must be within the range 0...255 if BITS_PER_SYMB==8, */ /* or in the range 0...63 if BITS_PER_SYMB==6, */ /* */ /* return value: character (or '\0' if ucsCode is not valid) */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/09/18 */ /****************************************************************************/ char convertUCScode2char(UWORD16 ucsCode); /****************************************************************************/ /* transformUCS2UTF() */ /* ****************** */ /* Transformation from UCS code into UTF-8. UTF-8 is a sequence consisting */ /* of 1, 2, 3, or 5 octets (bytes). See ISO/IEC 10646-1 Annex G. */ /* */ /* This routine only handles UCS codes in the range 0...0xFF since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input variables: */ /* - ucsCode UCS code index, */ /* */ /* output variables: */ /* - ptr_octet_fifo_state pointer to the output fifo state buffer for */ /* the UTF-8 octets. */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */ /****************************************************************************/ void transformUCS2UTF(UWORD16 ucsCode, fifo_state_t* ptr_octet_fifo_state); /****************************************************************************/ /* transformUTF2UCS() */ /* ****************** */ /* Transformation from UTF-8 into UCS code. */ /* */ /* This routine only handles UTF-8 sequences consisting of one or two */ /* octets (corresponding to UCS codes in the range 0...0xFF) since that is */ /* all that is required for the demonstration of Baudot support. */ /* */ /* input/output variables: */ /* - ptr_octet_fifo_state pointer to the input fifo state buffer for */ /* the UTF-8 octets. */ /* */ /* output variables: */ /* - *ptr_ucsCode UCS code index */ /* */ /* return value: */ /* true, if conversion was successful */ /* false, if the input fifo buffer didn't contain enough octets for a */ /* conversion into UCS code. The output variable *ptr_ucsCode */ /* doesn't contain a valid value in this case */ /* */ /* Matthias Doerbecker, Ericsson Eurolab Deutschland (EED/N/RV), 2000/06/29 */ /****************************************************************************/ BOOL transformUTF2UCS(UWORD16 *ptr_ucsCode, fifo_state_t *ptr_octet_fifo_state); #endif