FreeCalypso > hg > fc-magnetite
view src/cs/layer1/p_cfile/l1p_sync.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
| author | Mychaela Falconia <falcon@freecalypso.org> |
|---|---|
| date | Thu, 30 Jan 2020 17:45:48 +0000 |
| parents | 0740b5ff15f6 |
| children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_SYNC.C * * Filename l1p_sync.c * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define L1P_SYNC_C //#pragma DUPLICATE_FOR_INTERNAL_RAM_START #include "l1_macro.h" #include "l1_confg.h" #if L1_GPRS #if (CODE_VERSION == SIMULATION) #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #include <l1_trace.h> #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_msgty.h" #include "l1_varex.h" #include "l1_signa.h" #include "l1_proto.h" #if L2_L3_SIMUL #include "hw_debug.h" #endif #include "l1p_cons.h" #include "l1p_msgt.h" #include "l1p_deft.h" #include "l1p_vare.h" #include "l1p_prot.h" #include "l1p_mfta.h" #include "l1p_sign.h" #include "l1p_macr.h" #include "l1p_proto.h" #else #include <string.h> #include "l1_types.h" #include "sys_types.h" #include "l1_const.h" #include "l1_time.h" #if TESTMODE #include "l1tm_defty.h" #endif #if (AUDIO_TASK == 1) #include "l1audio_const.h" #include "l1audio_cust.h" #include "l1audio_defty.h" #endif #if (L1_GTT == 1) #include "l1gtt_const.h" #include "l1gtt_defty.h" #endif #if (L1_MP3 == 1) #include "l1mp3_defty.h" #endif #if (L1_MIDI == 1) #include "l1midi_defty.h" #endif #include "l1_defty.h" #include "cust_os.h" #include "l1_msgty.h" #include "l1_varex.h" #include "l1_signa.h" #include "l1_proto.h" #include "l1_trace.h" #if L2_L3_SIMUL #include "hw_debug.h" #endif #include "l1p_cons.h" #include "l1p_msgt.h" #include "l1p_deft.h" #include "l1p_vare.h" #include "l1p_prot.h" #include "l1p_mfta.h" #include "l1p_sign.h" #include "l1p_macr.h" #endif #if(RF_FAM == 61) #include "l1_rf61.h" #include "tpudrv61.h" #endif #if (GSM_IDLE_RAM !=0) #if (OP_L1_STANDALONE == 0) #include "csmi/sleep.h" #else #include "csmi_simul.h" #endif #endif /*-------------------------------------------------------*/ /* Prototypes of external functions used in this file. */ /*-------------------------------------------------------*/ void l1ps_tcr_ctrl (UWORD8 pm_position); void l1pddsp_meas_ctrl (UWORD8 nbmeas, UWORD8 pm_pos); void l1pddsp_meas_read (UWORD8 nbmeas, UWORD8 *pm_read); void l1pctl_transfer_agc_init(); UWORD8 l1pctl_pgc (UWORD8 pm, UWORD8 last_known_il, UWORD8 lna_off, UWORD16 radio_freq); void l1ps_bcch_meas_ctrl (UWORD8 ts); //#pragma DUPLICATE_FOR_INTERNAL_RAM_END #if (MOVE_IN_INTERNAL_RAM == 0) // Must be followed by the pragma used to duplicate the funtion in internal RAM //#pragma DUPLICATE_FOR_INTERNAL_RAM_START /*-------------------------------------------------------*/ /* l1ps_transfer_mode_manager() */ /*-------------------------------------------------------*/ /* Parameters : */ /* Return : */ /* Functionality : */ /*-------------------------------------------------------*/ void l1ps_transfer_mode_manager() { BOOL block_boundary = TRUE; UWORD8 current_assignment_command = NO_TBF; #if FF_TBF BOOL tbf_update_synchro_forced = FALSE; #endif //==================================== // NEW configuration management //==================================== if(!l1pa_l1ps_com.transfer.semaphore) // IF Transfer parameter structure protected, // No action within L1S. { WORD8 i; UWORD8 min_synchro_ts = 7; BOOL new_tbf_installed = FALSE; T_PACKET_TA *current_ta_config; // In packet transfer mode, we only detect STI at block boundaries in order to udpate the // ASET structure after the last Control of the previous TBF if (l1a_l1s_com.l1s_en_task[PDTCH] == TASK_ENABLED) { if ((l1s.next_time.fn_mod13 != 0)&&(l1s.next_time.fn_mod13 != 4)&& (l1s.next_time.fn_mod13 != 8)) { block_boundary = FALSE; } } // Delay STI detection when a poll response hasn't already been answered // for transition to Packet transfer mode else if (l1a_l1s_com.l1s_en_task[POLL] == TASK_ENABLED) { block_boundary = FALSE; } // LOOK FOR NEW ASSIGNMENT... //=========================== // Consider both FREE SET... for(i=0;i<2;i++) { // Is there a new transfer channel provided in "fset[i]"? if(((l1pa_l1ps_com.transfer.fset[i]->SignalCode == MPHP_ASSIGNMENT_REQ) && (block_boundary == TRUE)) || (l1pa_l1ps_com.transfer.fset[i]->SignalCode == MPHP_SINGLE_BLOCK_REQ)) { if(l1pa_l1ps_com.transfer.fset[i]->tbf_sti.present) // Starting time present. // Rem: starting time detected 1 frame in advance, this frame is used by // SYNCHRO task. { WORD32 time_diff; WORD8 frame_shift=0; WORD8 tn_diff; // In packet idle mode, L1 must detect if the synchronization change will happen // from a timeslot N to a timeslot M < N because in this case, a frame is skipped // and the MS is ready two frames after the synchronization change... a radio // block can be missed... // In packet transfer, the SYNCHRO task will always been executed on BURST 1, that let // 2 frames before the new TBF starts if (l1a_l1s_com.l1s_en_task[PDTCH] != TASK_ENABLED) { frame_shift -= 1; tn_diff = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot - l1a_l1s_com.dl_tn; if(tn_diff < 0) frame_shift -= 1; } //TBF_changes #if FF_TBF // PDTCH task is enabled else { // Pseudo TBF for Two phase access, new TBF configuration has to // be installed for Starting Time taking into account that a // SYNCHRO task has to be scheduled before. if ((l1pa_l1ps_com.transfer.aset->allocated_tbf == UL_TBF) && (l1pa_l1ps_com.transfer.aset->pseudo_tbf_two_phase_acc)) { // Note: We are at block boundary. if ((l1s.next_time.fn_mod13 == 0) || (l1s.next_time.fn_mod13 == 4)) frame_shift -= 4; else // i.e. (l1s.next_time.fn_mod13 == 8) frame_shift -= 5; } // Two phase access establishment on PACCH (therefore there is an // ongoing uplink TBF). if ((l1pa_l1ps_com.transfer.fset[i]->allocated_tbf == UL_TBF) && (l1pa_l1ps_com.transfer.fset[i]->pseudo_tbf_two_phase_acc)) { // Make sure single/multi block allocation // if a synchro task has to be inserted i.e. : // -> we are currently in EGPRS mode // -> and/or we change synchronization timeslot if ( (l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot != l1a_l1s_com.dl_tn) #if L1_EGPRS || (l1pa_l1ps_com.transfer.aset->egprs_param.tbf_mode == TBF_MODE_EGPRS) #endif ) { // Note: We are at block boundary. if ((l1s.next_time.fn_mod13 == 0) || (l1s.next_time.fn_mod13 == 4)) frame_shift -= 4; else // i.e. (l1s.next_time.fn_mod13 == 8) frame_shift -= 5; } } } #endif time_diff = ( (l1pa_l1ps_com.transfer.fset[i]->tbf_sti.absolute_fn) + frame_shift - (l1s.next_time.fn % 42432) + 2*42432) % 42432; if((time_diff >= (32024)) && (time_diff <= (42431))) // Starting time has been passed... //--------------------------------- { // For SINGLE BLOCK case, an error must be reported to L3. if(l1pa_l1ps_com.transfer.fset[i]->SignalCode == MPHP_SINGLE_BLOCK_REQ) { xSignalHeaderRec *msg; // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_MPHP_SINGLE_BLOCK_CON)); DEBUGMSG(status,NU_ALLOC_ERR) ((T_MPHP_SINGLE_BLOCK_CON *)(msg->SigP))->purpose = l1pa_l1ps_com.transfer.fset[i]->assignment_command; ((T_MPHP_SINGLE_BLOCK_CON *)(msg->SigP))->assignment_id = l1pa_l1ps_com.transfer.fset[i]->assignment_id; ((T_MPHP_SINGLE_BLOCK_CON *)(msg->SigP))->status = SINGLE_STI_PASSED; msg->SignalCode = L1P_SINGLE_BLOCK_CON; // send message... os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) // Do not reset "tbf_sti.present". // Ignore the SINGLE BLOCK requested. l1pa_l1ps_com.transfer.fset[i]->SignalCode = NULL; } else { // Reset "tbf_sti.present" flag to take into account the new // configuration. l1pa_l1ps_com.transfer.fset[i]->tbf_sti.present = FALSE; } } else if(time_diff == 0) // Starting time corresponds to current frame... //---------------------------------------------- { // Reset "tbf_sti.present" flag to take into account the new // configuration. l1pa_l1ps_com.transfer.fset[i]->tbf_sti.present = FALSE; } else // Starting time hasn't already been reached... //--------------------------------------------- { // time_to_next_l1s_task updated with time to sti Select_min_time(time_diff, l1a_l1s_com.time_to_next_l1s_task); } } // Do we switch to a new transfer configuration? // We have to switch if, new set STI is passed. if(!l1pa_l1ps_com.transfer.fset[i]->tbf_sti.present) { // Install new configuration immediately. // Rem: the new channel will start at a block boundary because by construction // PDTCH task is started every block boundary. T_TRANSFER_SET *transfer_set; // STI has been passed, we must switch to the new config. #if (TRACE_TYPE!=0) // Trace "starting time" on log file and screen. trace_fct(CST_STI_PASSED, l1a_l1s_com.Scell_info.radio_freq); #endif #if FF_TBF // Forces a SYNCHRO task prior to new TBF configuration if // -> Coming from 2 phases access TBF // -> Coming from (Packet) Idle if (((l1pa_l1ps_com.transfer.aset->allocated_tbf == UL_TBF) && (l1pa_l1ps_com.transfer.aset->pseudo_tbf_two_phase_acc)) || (l1a_l1s_com.l1s_en_task[PDTCH] == TASK_DISABLED) ) { // Can not be merged with test above evaluated only when a // starting time is present in the message. tbf_update_synchro_forced = TRUE; } #endif if (current_assignment_command == NO_TBF) current_assignment_command = l1pa_l1ps_com.transfer.fset[i]->assignment_command; else if ((current_assignment_command == UL_TBF) || (current_assignment_command == DL_TBF)) current_assignment_command = BOTH_TBF; // Check if anything to keep from previous configuration. // Select the best timeslot for timebase synchro. if(l1pa_l1ps_com.transfer.aset->allocated_tbf != NO_TBF) { UWORD8 synchro_ts; // Check if required to take TA from previous packet assignment // if TA not valid in new assignment command if ( l1pa_l1ps_com.transfer.fset[i]->packet_ta.ta == 255) { // new TA value to be taken from previous packet TA l1pa_l1ps_com.transfer.fset[i]->packet_ta.ta = l1pa_l1ps_com.transfer.aset->packet_ta.ta; } switch(l1pa_l1ps_com.transfer.fset[i]->assignment_command) { case DL_TBF: { // If any, keep the UL allocation from previous set. if((l1pa_l1ps_com.transfer.aset->allocated_tbf == UL_TBF) || (l1pa_l1ps_com.transfer.aset->allocated_tbf == BOTH_TBF)) { T_UL_RESSOURCE_ALLOC *ul_ptr; // Swap the pointers on UL parameter structures ul_ptr = l1pa_l1ps_com.transfer.fset[i]->ul_tbf_alloc; l1pa_l1ps_com.transfer.fset[i]->ul_tbf_alloc = l1pa_l1ps_com.transfer.aset->ul_tbf_alloc; l1pa_l1ps_com.transfer.aset->ul_tbf_alloc = ul_ptr; l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = BOTH_TBF; l1pa_l1ps_com.transfer.fset[i]->ul_tbf_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; // Chose min synchro timeslot from UL and DL TBFs. if(l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot < l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot) { synchro_ts = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; } else { synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; } } // No UL TBF running, select the new DL TBF synchro timeslot. else { synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; } } break; case UL_TBF: { // If any, keep the DL allocation from previous set. if((l1pa_l1ps_com.transfer.aset->allocated_tbf == DL_TBF) || (l1pa_l1ps_com.transfer.aset->allocated_tbf == BOTH_TBF)) { l1pa_l1ps_com.transfer.fset[i]->dl_tbf_alloc = l1pa_l1ps_com.transfer.aset->dl_tbf_alloc; l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = BOTH_TBF; l1pa_l1ps_com.transfer.fset[i]->dl_tbf_synchro_timeslot = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; // Chose min synchro timeslot from UL and DL TBFs. if(l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot < l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot) { synchro_ts = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; } else { synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; } } // No DL TBF running, select the new UL TBF synchro timeslot. else { synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; } // Reset Repeat allocation starting time checking l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation = FALSE; // Reset Allocation Exhaustion detection flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; } break; case BOTH_TBF: case NO_TBF: default: { // Nothing to keep, everything (UL & DL) is replaced. synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; // Reset Repeat allocation starting time checking l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation = FALSE; // Reset Allocation Exhaustion detection flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; } break; } // end of switch(...assignment_command) if(synchro_ts < min_synchro_ts) min_synchro_ts = synchro_ts; } // end of if(...allocated_tbf != NO_TBF) else { min_synchro_ts = l1pa_l1ps_com.transfer.fset[i]->transfer_synchro_timeslot; } // New set becomes active and old becomes free. // Save a pointer on currently used PTCCH parameters current_ta_config = &l1pa_l1ps_com.transfer.aset->packet_ta; transfer_set = l1pa_l1ps_com.transfer.aset; l1pa_l1ps_com.transfer.aset = l1pa_l1ps_com.transfer.fset[i]; l1pa_l1ps_com.transfer.fset[i] = transfer_set; l1pa_l1ps_com.transfer.fset[i]->allocated_tbf = NO_TBF; l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = min_synchro_ts; // Set local flag. new_tbf_installed = TRUE; if(l1pa_l1ps_com.transfer.aset->SignalCode == MPHP_ASSIGNMENT_REQ) // Assignement confirmation message is sent { xSignalHeaderRec *msg; // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_L1P_TRANSFER_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_TRANSFER_DONE; ((T_L1P_TRANSFER_DONE *) (msg->SigP))->assignment_id = l1pa_l1ps_com.transfer.aset->assignment_id; // Insert "t_difference" information in L1P_TRANSFER_DONE msg // will be used in Ncell Dedic6 state machine to request a reset // or not of the state machine ((T_L1P_TRANSFER_DONE *) (msg->SigP))->tn_difference = min_synchro_ts - l1a_l1s_com.dl_tn; // detect the Transition IDLE -> Transfer if (l1a_l1s_com.l1s_en_task[PDTCH] == TASK_ENABLED) ((T_L1P_TRANSFER_DONE *) (msg->SigP))->Transfer_update = TRUE; else ((T_L1P_TRANSFER_DONE *) (msg->SigP))->Transfer_update = FALSE; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } // New config has been acknowledeged, clear SignalCode... l1pa_l1ps_com.transfer.fset[i]->SignalCode = NULL; l1pa_l1ps_com.transfer.aset->SignalCode = NULL; } // end if(...tbf_sti.present) } // end of if(...SignalCode == MPHP_ASSIGNMENT_REQ) } if(new_tbf_installed == TRUE) { // Start the new configuration //---------------------------- // Enable PACKET tasks. { // Set assignment_command to the last enabled TBF type. // This permits MAC-S to correctly manage TBF boundary conditions. l1pa_l1ps_com.transfer.aset->assignment_command = current_assignment_command; // Flag the new configuration to MACS. l1ps_macs_com.new_set = TRUE; // Flag the new configuration in order to update the Read set parameters // in the first Read phase of the new TBF // This permits to start using the new aset parameters for the first Control of // the first block of the new TBF and to keep the parameters needed for the // last read phase of the last block of the previous TBF. l1ps.read_param.new_set = TRUE; // TBF_changes #if !FF_TBF // We need to detect that we just leaving CS/P Idle mode to enter // in Packet Transfer mode. Then we have to enable SYNCHRO task on dectection // of a mode change (Idle or Packet idle -> Packet transfer). // Note: This check can't be gathered with the one done a little bit later // on tn_difference and SINGLE task from the fact that the allocated_tbf // is checked and PDTCH enabled. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { if(l1a_l1s_com.l1s_en_task[PDTCH] == TASK_DISABLED) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; l1a_l1s_com.dsp_scheduler_mode = GPRS_SCHEDULER; } } #endif // Disable interference measurements l1a_l1s_com.l1s_en_task[ITMEAS] = TASK_DISABLED; // Check for Continuous Timing advance procedure. // Enable PTCCH task if required. if((l1pa_l1ps_com.transfer.aset->packet_ta.ta_index != 255) && (l1pa_l1ps_com.transfer.aset->packet_ta.ta_tn != 255)) { // No action when the configuration is the same as the current one. if((l1pa_l1ps_com.transfer.aset->packet_ta.ta_index != current_ta_config->ta_index) || (l1pa_l1ps_com.transfer.aset->packet_ta.ta_tn != current_ta_config->ta_tn) || (l1a_l1s_com.l1s_en_task[PTCCH] == TASK_DISABLED)) // The configuration is different than the current one or no PTCCH is currently running // (for example in packet idle) { // Reset PTCCH execution variables. l1pa_l1ps_com.transfer.ptcch.activity = 0; l1pa_l1ps_com.transfer.ptcch.request_dl = FALSE; // Enable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_ENABLED; } } else // PTCCH is not configured. { // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; } // Transfer AGC initialization l1pctl_transfer_agc_init(); switch(l1pa_l1ps_com.transfer.aset->allocated_tbf) { case SINGLE_BLOCK_UL: { // Set SINGLE execution variables. l1pa_l1ps_com.transfer.single_block.activity = SINGLE_UL; // UL enabled // Enable SINGLE task. l1a_l1s_com.l1s_en_task[SINGLE] = TASK_ENABLED; } break; case SINGLE_BLOCK_DL: { // Set SINGLE execution variables. l1pa_l1ps_com.transfer.single_block.activity = SINGLE_DL; // DL enabled // Enable SINGLE task. l1a_l1s_com.l1s_en_task[SINGLE] = TASK_ENABLED; } break; case TWO_PHASE_ACCESS: { // Set SINGLE execution variables. l1pa_l1ps_com.transfer.single_block.activity |= SINGLE_DL; // DL enabled l1pa_l1ps_com.transfer.single_block.activity |= SINGLE_UL; // UL enabled // Enable SINGLE task. l1a_l1s_com.l1s_en_task[SINGLE] = TASK_ENABLED; } break; default: { /* * FreeCalypso: removal of the following line is * TCS211 reconstruction */ //if(l1a_l1s_com.l1s_en_task[PDTCH] == TASK_ENABLED) //In case of transition idle to transfer the Packet transfer mode is set when synchro is executed // Layer 1 internal mode is set to PACKET TRANSFER MODE. l1a_l1s_com.mode = PACKET_TRANSFER_MODE; // Enable PDTCH task. l1a_l1s_com.l1s_en_task[PDTCH] = TASK_ENABLED; // Need to disable SINGLE task for two phase access case l1a_l1s_com.l1s_en_task[SINGLE] = TASK_DISABLED; } break; } // End switch() // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { // Save the "timeslot difference" between new and old configuration // in "tn_difference". // tn_difference -> loaded with the number of timeslot to shift. // dl_tn -> loaded with the new timeslot. l1a_l1s_com.tn_difference += min_synchro_ts - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = min_synchro_ts; #if !FF_TBF // Enable SYNCHRO task only if lowest allocated timeslot changed // or if each time the SINGLE task is enabled // In the specific case of the SINGLE task, the GPRS_SCHEDULER // has to be selected. if((l1a_l1s_com.tn_difference != 0) || (l1a_l1s_com.l1s_en_task[SINGLE] == TASK_ENABLED)) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; l1a_l1s_com.dsp_scheduler_mode = GPRS_SCHEDULER; } #else // Enable SYNCHRO task if at least one of these conditions fulfilled: // -> Change in the timeslot synhronization // -> Change of the ongoing TBF mode (synchro_forced) // -> Exit of two phase access (synchro_forced) // -> Coming from (Packet) Idle (synchro forced) // -> SINGLE task enabled if((l1a_l1s_com.tn_difference != 0) || (tbf_update_synchro_forced) || (l1a_l1s_com.l1s_en_task[SINGLE] == TASK_ENABLED)) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; l1a_l1s_com.dsp_scheduler_mode = GPRS_SCHEDULER; } #endif } else {}// L1A is touching dl_tn, tn_difference and dsp_scheduler_mode parameters... } } // LOOK FOR TIMING AVANCE UPDATE //=============================== if(l1pa_l1ps_com.transfer.ptcch.ta_update_cmd == TRUE) { #define CURRENT_TA_CONFIG l1pa_l1ps_com.transfer.aset->packet_ta #define NEW_TA_CONFIG l1pa_l1ps_com.transfer.ptcch.packet_ta // Only update if the assignment_id of the running TBF matches with the assignment_id // given in the MPHP_TIMING_ADVANCE_REQ message if (l1pa_l1ps_com.transfer.ptcch.assignment_id == l1pa_l1ps_com.transfer.aset->assignment_id) { xSignalHeaderRec *msg; // Immediate Update of PACKET TA structure. //----------------------------------------- // Update TA value only if a new value is provided. if(NEW_TA_CONFIG.ta != 255) CURRENT_TA_CONFIG.ta = NEW_TA_CONFIG.ta; if((NEW_TA_CONFIG.ta_index != 255) && (NEW_TA_CONFIG.ta_tn != 255)) // There is a New PTCCH configuration. { // No action when the configuration is the same as the current one. if((NEW_TA_CONFIG.ta_index != CURRENT_TA_CONFIG.ta_index) || (NEW_TA_CONFIG.ta_tn != CURRENT_TA_CONFIG.ta_tn)) // The configuration is different than the current one. { // Download the new configuration. CURRENT_TA_CONFIG.ta_index = NEW_TA_CONFIG.ta_index; CURRENT_TA_CONFIG.ta_tn = NEW_TA_CONFIG.ta_tn; // Reset PTCCH execution variables. l1pa_l1ps_com.transfer.ptcch.activity = 0; l1pa_l1ps_com.transfer.ptcch.request_dl = FALSE; // Enable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_ENABLED; } } else // PTCCH is not configured. { // Diable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; } // Send confirmation message to L3. msg = os_alloc_sig(sizeof(T_MPHP_TIMING_ADVANCE_CON)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_TA_CONFIG_DONE; ((T_MPHP_TIMING_ADVANCE_CON *) msg->SigP)->assignment_id = l1pa_l1ps_com.transfer.aset->assignment_id; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } // End if "assignment_id of the running TBF matches" // Reset Control code. l1pa_l1ps_com.transfer.ptcch.ta_update_cmd = FALSE; } // End if(...ta_update_cmd == TRUE) // LOOK FOR PSI PARAMETERS UPDATE //=============================== if(l1pa_l1ps_com.transfer.psi_param.psi_param_update_cmd == TRUE) { // Update parameters l1a_l1s_com.Scell_info.pb = l1pa_l1ps_com.transfer.psi_param.Scell_pb; l1pa_l1ps_com.access_burst_type = l1pa_l1ps_com.transfer.psi_param.access_burst_type; // Reset Control code. l1pa_l1ps_com.transfer.psi_param.psi_param_update_cmd = FALSE; } /***********************************************************/ /* TBF release, PDCH release, Repeat allocation, Fixed */ /* allocation exhaustion */ /***********************************************************/ // These events are only taken into account on block boundaries // in order to keep the "aset" structure unchanged for all the control phases // of the last block before modification if(block_boundary) { // LOOK FOR TBF TO BE RELEASED... //=============================== if(l1pa_l1ps_com.transfer.tbf_release_param.tbf_release_cmd == TRUE) { xSignalHeaderRec *msg; //TBF_changes #if !FF_TBF switch(l1pa_l1ps_com.transfer.tbf_release_param.released_tbf) #else UWORD8 released_tbf; // Special case if we got a request to release a two phase access TBF: // It is registered within ASET structure as an uplink TBF. If we are // currently in pseudo TBF for two phase access, we process the request // like an uplink release, otherwise we skip it and just send the // L1P_TBF_RELEASED to L1A. released_tbf = l1pa_l1ps_com.transfer.tbf_release_param.released_tbf; if (released_tbf == TWO_PHASE_ACCESS) { if (l1pa_l1ps_com.transfer.aset->pseudo_tbf_two_phase_acc) released_tbf = UL_TBF; else released_tbf = NO_TBF; } switch(released_tbf) #endif { case UL_TBF: { if(l1pa_l1ps_com.transfer.aset->allocated_tbf == UL_TBF) { // Disable PDTCH task. l1a_l1s_com.l1s_en_task[PDTCH] = TASK_DISABLED; // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; // Free the active set. l1pa_l1ps_com.transfer.aset->allocated_tbf = NO_TBF; } else if(l1pa_l1ps_com.transfer.aset->allocated_tbf == BOTH_TBF) { // Still DL_TBF running. // We must synchro to the 1st timeslot of DL_TBF. // REM: the new configuration is not flagged to MACS via "l1ps_macs_com.new_set" // since MACS will detect the alloc change. // Active set becomes DL TBF. l1pa_l1ps_com.transfer.aset->allocated_tbf = DL_TBF; // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { l1a_l1s_com.tn_difference += l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; // Enable SYNCHRO task only when camp timeslot is changed. if(l1a_l1s_com.tn_difference != 0) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; } } // Diable PTCCH if timeslot doesn't match with the remaining DL TBF allocation if (!((0x80 >> l1pa_l1ps_com.transfer.aset->packet_ta.ta_tn) & l1pa_l1ps_com.transfer.aset->dl_tbf_alloc.timeslot_alloc)) { // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) l1_trace_ptcch_disable(); #endif } } // Reset Repeat allocation starting time checking l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation = FALSE; // Reset Allocation Exhaustion detection flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; #if L1_EDA // Disable FB/SB task detection mechanism for MS class 12 l1ps_macs_com.fb_sb_task_detect = FALSE; #endif } break; case DL_TBF: { if(l1pa_l1ps_com.transfer.aset->allocated_tbf == DL_TBF) { // Disable PDTCH task. l1a_l1s_com.l1s_en_task[PDTCH] = TASK_DISABLED; // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; // Free the active set. l1pa_l1ps_com.transfer.aset->allocated_tbf = NO_TBF; } else if(l1pa_l1ps_com.transfer.aset->allocated_tbf == BOTH_TBF) { // Still UL_TBF running. // We must synchro to the 1st timeslot of UL_TBF. // REM: the new configuration is not flagged to MACS via "l1ps_macs_com.new_set" // since MACS will detect the alloc change. // Active set becomes UL TBF. l1pa_l1ps_com.transfer.aset->allocated_tbf = UL_TBF; // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { l1a_l1s_com.tn_difference += l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; // Enable SYNCHRO task only when camp timeslot is changed. if(l1a_l1s_com.tn_difference != 0) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; } } // Diable PTCCH if timeslot doesn't match with the remaining UL TBF allocation if (!((0x80 >> l1pa_l1ps_com.transfer.aset->packet_ta.ta_tn) & l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc)) { // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) l1_trace_ptcch_disable(); #endif } } } break; case BOTH_TBF: { // No more TBF... // Disable PDTCH task. l1a_l1s_com.l1s_en_task[PDTCH] = TASK_DISABLED; // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; // Free the active set. l1pa_l1ps_com.transfer.aset->allocated_tbf = NO_TBF; // Reset Repeat allocation starting time checking l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation = FALSE; // Reset Allocation Exhaustion detection flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; #if L1_EDA // Disable FB/SB task detection mechanism for MS class 12 l1ps_macs_com.fb_sb_task_detect = FALSE; #endif } break; } // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_L1P_TBF_RELEASED)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_TBF_RELEASED; // initialize the TBF type for the confirmation msg ((T_L1P_TBF_RELEASED *) msg->SigP)->tbf_type = l1pa_l1ps_com.transfer.tbf_release_param.released_tbf; if (l1pa_l1ps_com.transfer.aset->allocated_tbf == NO_TBF) { /* * FreeCalypso: removal of the following line is * TCS211 reconstruction */ //l1ps.read_param.assignment_id = 0x01; /* default non initialised value for next tbf */ ((T_L1P_TBF_RELEASED *) msg->SigP)->released_all = TRUE; #if (DSP == 33) || (DSP == 34) || (DSP == 35) || (DSP == 36) || (DSP == 37) // Correction of BUG1041: reset of multislot bit in d_bbctrl_gprs // when leaving patcket transfer. l1ps_dsp_com.pdsp_ndb_ptr->d_bbctrl_gprs = l1_config.params.bbctrl; #endif } else { ((T_L1P_TBF_RELEASED *) msg->SigP)->released_all = FALSE; } // Insert "tn_difference" information in L1P_TBF_RELEASED msg // will be used in Ncell Dedic6 state machine to request a reset // or not of the state machine. ((T_L1P_TBF_RELEASED *) (msg->SigP))->tn_difference = l1a_l1s_com.tn_difference; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) // Flag the new configuration in order to update the Read set parameters // with the "aset" structure modifications in the first PDTCH Read phase // after configuration change l1ps.read_param.new_set = TRUE; // Reset Control code. l1pa_l1ps_com.transfer.tbf_release_param.tbf_release_cmd = FALSE; } // LOOK FOR PDCH TO BE RELEASED... //================================ if(l1pa_l1ps_com.transfer.pdch_release_param.pdch_release_cmd == TRUE) { xSignalHeaderRec *msg; UWORD8 timeslot,timeslot_alloc; // PDCH Release only apply if the assignement_id of the running TBF matches // with the assignment_id included in the MPHP_PDCH_RELEASE_REQ message if (l1pa_l1ps_com.transfer.pdch_release_param.assignment_id == l1pa_l1ps_com.transfer.aset->assignment_id) { // Update timeslot allocation bitmaps l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc &= l1pa_l1ps_com.transfer.pdch_release_param.timeslot_available; l1pa_l1ps_com.transfer.aset->dl_tbf_alloc.timeslot_alloc &= l1pa_l1ps_com.transfer.pdch_release_param.timeslot_available; // Process the downlink TBF first allocated timeslot timeslot_alloc = l1pa_l1ps_com.transfer.aset->dl_tbf_alloc.timeslot_alloc; timeslot = 0; while((timeslot<7) && !(timeslot_alloc & (0x80>>timeslot))) { timeslot++; } l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot = timeslot; // Process the uplink TBF first allocated timeslot timeslot_alloc = l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc; timeslot = 0; #if L1_EDA // Dynamic allocation mode or Extended Dynamic allocation mode if((l1pa_l1ps_com.transfer.aset->mac_mode == DYN_ALLOC) || (l1pa_l1ps_com.transfer.aset->mac_mode == EXT_DYN_ALLOC)) #else // Dynamic allocation mode if(l1pa_l1ps_com.transfer.aset->mac_mode == DYN_ALLOC) #endif { while((timeslot<7) && !(timeslot_alloc & (0x80>>timeslot))) { timeslot++; } } else // Fixed allocation mode if(l1pa_l1ps_com.transfer.aset->mac_mode == FIX_ALLOC_NO_HALF) { // If the control timeslot hasn't been released if (l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc & (0x80 >> l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->fixed_alloc.ctrl_timeslot)) { // The first allocated timeslot is the control timeslot timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->fixed_alloc.ctrl_timeslot; } else { // The first allocated timeslot is found in the allocation bitmap while((timeslot<7) && !(timeslot_alloc & (0x80>>timeslot))) { timeslot++; } } } l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot = timeslot; // Fill "synchro_timeslot" which will be the frame synchro slot. switch(l1pa_l1ps_com.transfer.aset->allocated_tbf) { case(DL_TBF): { l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; } break; case(UL_TBF): { l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; } break; case(BOTH_TBF): { if (l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot > l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot) { l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; } else { l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; } } break; } // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { // New synchronization l1a_l1s_com.tn_difference += l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot; // REM: the new configuration is not flagged to MACS via "l1ps_macs_com.new_set" // since MACS will detect the alloc change. // Enable SYNCHRO task only when camp timeslot is changed. if(l1a_l1s_com.tn_difference != 0) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; } } // Disable PTCCH if timeslot doesn't match with the remaining PDCH allocation if (!((0x80 >> l1pa_l1ps_com.transfer.aset->packet_ta.ta_tn) & l1pa_l1ps_com.transfer.pdch_release_param.timeslot_available)) { // Disable PTCCH task. l1a_l1s_com.l1s_en_task[PTCCH] = TASK_DISABLED; #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) l1_trace_ptcch_disable(); #endif } // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_L1P_PDCH_RELEASE_CON)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_PDCH_RELEASED; ((T_L1P_PDCH_RELEASE_CON *) msg->SigP)->assignment_id = l1pa_l1ps_com.transfer.pdch_release_param.assignment_id; // Insert "tn_difference" information in T_L1P_PDCH_RELEASE_CON msg // will be used in Ncell Dedic6 state machine to request a reset // or not of the state machine ((T_L1P_PDCH_RELEASE_CON *) (msg->SigP))->tn_difference = l1a_l1s_com.tn_difference; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) // Flag the new configuration in order to update the Read set parameters // with the "aset" structure modifications in the first PDTCH Read phase // after configuration change l1ps.read_param.new_set = TRUE; } // End if "assignment_id matches with the running TBF" // Reset Control code. l1pa_l1ps_com.transfer.pdch_release_param.pdch_release_cmd = FALSE; } // LOOK FOR REPEAT ALLOCATION ... //================================ if(l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation) { UWORD8 timeslot,timeslot_alloc; // Starting time checking... //-------------------------- if(l1pa_l1ps_com.transfer.repeat_alloc.tbf_sti.present) // Starting time present. // Rem: starting time detected 1 frame in advance, this frame is used by // SYNCHRO task. { WORD32 time_diff; // If synchro change occurs, it's always from a timeslot N to N + 1 time_diff = ( (l1pa_l1ps_com.transfer.repeat_alloc.tbf_sti.absolute_fn - 1) - (l1s.next_time.fn % 42432) + 2*42432) % 42432; // Starting time has been passed... if(((time_diff >= (32024)) && (time_diff <= (42431))) || (time_diff == 0)) { l1pa_l1ps_com.transfer.repeat_alloc.tbf_sti.present = FALSE; } } // End if "starting time present" // Starting time passed... //------------------------ // If the repeat allocation starts on this frame... if (!l1pa_l1ps_com.transfer.repeat_alloc.tbf_sti.present) { #if (TRACE_TYPE!=0) // Trace "starting time" on log file and screen. trace_fct(CST_STI_PASSED, l1a_l1s_com.Scell_info.radio_freq); #endif // Update ts_override and starting time l1pa_l1ps_com.transfer.aset->ts_override = l1pa_l1ps_com.transfer.repeat_alloc.ts_override; l1pa_l1ps_com.transfer.aset->tbf_sti.absolute_fn = l1pa_l1ps_com.transfer.repeat_alloc.tbf_sti.absolute_fn; // Lowest allocated timeslot for the UL TBF // If the downlink control timeslot hasn't been released: it's the downlink control timeslot // Else no change if ( l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc & (0x80 >> l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->fixed_alloc.ctrl_timeslot)) { // Synchronization on the downlink control timeslot l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->fixed_alloc.ctrl_timeslot; } // Synchronization // If a downlink TBF is enabled if ( l1pa_l1ps_com.transfer.aset->allocated_tbf == BOTH_TBF) { // Synchronization on the downlink TBF lowest allocated timeslot ? if (l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot > l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot) l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->dl_tbf_synchro_timeslot; else l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; } // Else: synchronization on the uplink TBF lowest allocated timeslot else l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { l1a_l1s_com.tn_difference += l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot; // Enable SYNCHRO task only when camp timeslot is changed. if(l1a_l1s_com.tn_difference != 0) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; } } // Set assignment_command to the last enabled TBF type. // This permits MAC-S to correctly manage TBF boundary conditions. if ((current_assignment_command == NO_TBF) || (current_assignment_command == UL_TBF)) l1pa_l1ps_com.transfer.aset->assignment_command = UL_TBF; else l1pa_l1ps_com.transfer.aset->assignment_command = BOTH_TBF; // Flag the new configuration to MACS. l1ps_macs_com.new_set = TRUE; // Flag the new configuration in order to update the Read set parameters // with the "aset" structure modifications in the first PDTCH Read phase // after configuration change l1ps.read_param.new_set = TRUE; // Reset Repeat allocation starting time checking l1pa_l1ps_com.transfer.repeat_alloc.repeat_allocation = FALSE; // Reset Allocation Exhaustion detection flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; // Send confirmation { xSignalHeaderRec *msg; // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_L1P_REPEAT_ALLOC_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_REPEAT_ALLOC_DONE; // Insert "tn_difference" information in T_L1P_REPEAT_ALLOC_DONE msg // will be used in Ncell Dedic6 state machine to request a reset // or not of the state machine ((T_L1P_REPEAT_ALLOC_DONE *) (msg->SigP))->tn_difference = l1a_l1s_com.tn_difference; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } } // End if "Repeat allocation starts this frame..." } // End of "Repeat allocation starting time checking" // LOOK FOR FIXED MODE ALLOCATION BITMAP EXHAUSTION ... //================================================== if(l1ps_macs_com.fix_alloc_exhaust_flag) { #if (TRACE_TYPE!=0) // Trace "starting time" on log file and screen. trace_fct(CST_ALLOC_EXHAUSTION, l1a_l1s_com.Scell_info.radio_freq); #endif // Update uplink TBF synchronization timeslot { UWORD8 timeslot = 0; UWORD8 bitmap = 0x80; while (!(l1pa_l1ps_com.transfer.aset->ul_tbf_alloc->timeslot_alloc & bitmap)) { timeslot ++; bitmap >>= 1; } // Synchronization on the lowest allocated timeslot for uplink tranfer l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot = timeslot; } // New synchronization only done on a timeslot inferior to current synchronization // - if a DL TBF is present: the DL TBF synchronization is taken into account // - an UL TBF is present: synchronization can only be done on a timeslot number inferior or // equal to the current synchronization if (l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot < l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot) { l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot = l1pa_l1ps_com.transfer.aset->ul_tbf_synchro_timeslot; } // SYNCHRO task is not schedule if we are in the specific case: // L1A is touching SYNCHRO parameters (tn_difference, dl_tn and dsp_scheduler_mode) // and leave L1A to go in HISR (L1S) in middle of the update (cf. BUG1339) // Note: tn_difference has to be accumulated in order to cope with the // specific case: L1A has just updated tn_difference, dl_tn and dsp_scheduler_mode // parameters and we enter in the HISR after the reset of the SYNCHRO Semaphore. if(l1a_l1s_com.task_param[SYNCHRO] == SEMAPHORE_RESET) { l1a_l1s_com.tn_difference += l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot - l1a_l1s_com.dl_tn; l1a_l1s_com.dl_tn = l1pa_l1ps_com.transfer.aset->transfer_synchro_timeslot; // Enable SYNCHRO task only when camp timeslot is changed. if(l1a_l1s_com.tn_difference != 0) { l1a_l1s_com.l1s_en_task[SYNCHRO] = TASK_ENABLED; } } // Send signal to L1A { xSignalHeaderRec *msg; // Send confirmation msg to L3/MACA. msg = os_alloc_sig(sizeof(T_L1P_ALLOC_EXHAUST_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) msg->SignalCode = L1P_ALLOC_EXHAUST_DONE; // Insert "tn_difference" information in T_L1P_ALLOC_EXHAUST_DONE msg // will be used in Ncell Dedic6 state machine to request a reset // or not of the state machine ((T_L1P_ALLOC_EXHAUST_DONE *) (msg->SigP))->tn_difference = l1a_l1s_com.tn_difference; os_send_sig(msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) } // Flag the new configuration in order to update the Read set parameters // with the "aset" structure modifications in the first PDTCH Read phase // after configuration change l1ps.read_param.new_set = TRUE; // Reset flag l1ps_macs_com.fix_alloc_exhaust_flag = FALSE; } // End if "fixed mode allocation bitmap has exhausted" } // End of "block_boundary" } // end of if(!l1pa_l1ps_com.transfer.semaphore) } //#pragma DUPLICATE_FOR_INTERNAL_RAM_END #endif // MOVE_IN_INTERNAL_RAM #if !((MOVE_IN_INTERNAL_RAM == 1) && (GSM_IDLE_RAM !=0)) // MOVE TO INTERNAL MEM IN CASE GSM_IDLE_RAM enabled //#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_START // KEEP IN EXTERNAL MEM otherwise /*-------------------------------------------------------*/ /* l1ps_meas_manager() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* This function is the tasks manager for Packet Cell */ /* Reselection. */ /* The followings tasks are handled: */ /* */ /* FSMS_MEAS: */ /* */ /* P_CRMS_MEAS: Packet Cell Reselection measurement */ /* in Idle mode. The task includes: */ /* o BA(GPRS) measurement */ /* o Network controlled meas. */ /* o Extended measurement */ /* Occurrences are performed in order to satisfy the */ /* following ETSI constraints: */ /* 1. At least one measure of each BA BCCH carrier shall */ /* be taken for each paging block, */ /* 2. A minimum of one measure for each BA BCCH carrier */ /* for every 4 second must be performed, */ /* 3. MS is not required to take more than one sample */ /* per second for each BCCH carrier, */ /* 4. At least 5 measures per BA BCCH carrier are */ /* required for a valid received level average value */ /* (RLA_P), */ /* 5. RLA_P shall be based on samples collected over a */ /* period of 5s to Max{5s, five consecutive PPCH */ /* blocks dedicated to the MS}, */ /* 6. Samples allocated to each carrier shall as far */ /* as possible be uniformly distributed over the */ /* evaluation period. */ /* */ /* A TI condition is include: */ /* 7. In order to save power consumption, it will be */ /* necessary to use as far as possible the PPCH */ /* blocks to perform a maximum of measurements during */ /* these frames. */ /* */ /* From the previous constraints, it appears that */ /* Paging block period needs to be considered to fit */ /* ETSI consideration. */ /* Tow case are considered: */ /* o PPCH period >= 1s */ /* o PPCH period < 1s */ /* */ /* Once all carriers of the frequency list have been */ /* measured, a reporting message L1P_CR_MEAS_DONE is */ /* built and sent to L1A. */ /*-------------------------------------------------------*/ void l1ps_meas_manager() { enum states { NULL_MEAS = 0, PCHTOTAL = 1, TOTAL = 2, MEAS = 3, MEASTOTAL = 4 }; UWORD8 IL_for_rxlev; BOOL init_meas = FALSE; #if (RF_FAM == 61) UWORD16 dco_algo_ctl_pw = 0; UWORD16 dco_algo_ctl_pw_temp = 0; UWORD8 if_ctl = 0; UWORD8 if_threshold = C_IF_ZERO_LOW_THRESHOLD_GSM; #endif #define cr_list_size l1pa_l1ps_com.cres_freq_list.alist->nb_carrier static WORD8 remain_carrier; static UWORD8 nbr_meas; static BOOL schedule_trigger; static xSignalHeaderRec *cr_msg = NULL; static WORD16 time_to_wake_up; static WORD16 time_to_4s; static WORD16 time_to_1s; static UWORD32 fn_update; static UWORD16 session_done; // Did a session of measures performed in the 4s period static UWORD16 session_done_1s; // Did a session of measures performed in the 1s period static UWORD8 state; static UWORD32 reporting_period; // Parameter used in "reporting_period" computation #if (FF_L1_FAST_DECODING == 1) if (l1a_apihisr_com.fast_decoding.deferred_control_req == TRUE) { /* Do not execute l1s_meas_manager if a fast decoding IT is scheduled */ return; } #endif /*#if (FF_L1_FAST_DECODING == 1)*/ #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif //==================================================== // RESET MEASUREMENT MACHINES WHEN ABORT EXECUTED. //==================================================== if(l1s.dsp_ctrl_reg & CTRL_ABORT) // ABORT task has been controlled, which reset the MCU/DSP communication. // We must rewind any measurement activity. { // Aborted measurements have to be rescheduled nbr_meas += l1pa_l1ps_com.cr_freq_list.ms_ctrl_d + l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd; // Rewind "next_to_ctrl" counter to come back to the next carrier to // measure. l1pa_l1ps_com.cr_freq_list.next_to_ctrl = l1pa_l1ps_com.cr_freq_list.next_to_read; // Reset flags. l1pa_l1ps_com.cr_freq_list.ms_ctrl = 0; l1pa_l1ps_com.cr_freq_list.ms_ctrl_d = 0; l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd = 0; } #if (GSM_IDLE_RAM != 1) // Test if task is disabled and cr_msg != NULL, then de-allocate memory if (!(l1pa_l1ps_com.l1ps_en_meas & P_CRMS_MEAS) && !(l1pa_l1ps_com.meas_param & P_CRMS_MEAS)) { if(cr_msg != NULL) { // Cell reselection measurement process has been stopped by L3 // Deallocate memory for the received message if msg not forwarded to L3. // ---------------------------------------------------------------------- os_free_sig(cr_msg); DEBUGMSG(status,NU_DEALLOC_ERR) cr_msg = NULL; } } #endif if((l1pa_l1ps_com.l1ps_en_meas & P_CRMS_MEAS) && (l1pa_l1ps_com.meas_param & P_CRMS_MEAS)) // Some changes occured on the Frequency list or the PAGING PARAMETERS have // changed. { // Reset Packet Cell Reselection semaphore. l1pa_l1ps_com.meas_param &= P_CRMS_MEAS_MASK; // Paging process has been interrupted by a L3 message // Deallocate memory for the received message if msg not forwarded to L3. // ---------------------------------------------------------------------- //Update Frequency list pointer l1pa_l1ps_com.cres_freq_list.alist = l1pa_l1ps_com.cres_freq_list.flist; // Rewind frequency list counters to come back to the first carrier of this // aborted session. l1pa_l1ps_com.cr_freq_list.next_to_read = 0; l1pa_l1ps_com.cr_freq_list.next_to_ctrl = 0; // Reset flags. l1pa_l1ps_com.cr_freq_list.ms_ctrl = 0; l1pa_l1ps_com.cr_freq_list.ms_ctrl_d = 0; l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd = 0; // Initialize timer time_to_wake_up = 0; time_to_4s = 866; time_to_1s = 216; fn_update = l1s.actual_time.fn; // Initialize Reporting Period reporting_period = l1s.actual_time.fn; // Initialize Cell reselection state machine and parameters state = NULL_MEAS; session_done = 0; session_done_1s = 0; schedule_trigger = TRUE; nbr_meas = 0; init_meas = TRUE; } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) #endif // Packet Idle Cell Relselection Power Measurements fonction if P_CRMS_MEAS task still enabled. // In case L1S has switched in GPRS packet transfer mode and L1S_TRANSFER_DONE message hasn't been processed yet // by L1A, no control or read task shall be done. if ((l1pa_l1ps_com.l1ps_en_meas & P_CRMS_MEAS) && !(l1pa_l1ps_com.meas_param & P_CRMS_MEAS) && (l1a_l1s_com.l1s_en_task[PDTCH] != TASK_ENABLED)) { #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif // Update P_CRMS_MEAS timers { UWORD16 fn_diff; #define current_fn l1s.actual_time.fn // Compute Frame Number increment since last L1S activity if(current_fn >= fn_update) fn_diff = current_fn - fn_update; else fn_diff = (current_fn + MAX_FN) - fn_update; // Update timer time_to_4s -= fn_diff; if(time_to_4s <= 0) { time_to_4s += 866; session_done = 0; } time_to_1s -= fn_diff; if(time_to_1s <= 0) { time_to_1s += 216; session_done_1s = 0; } // Note: time to next meas position is negative during the meas. // session period time_to_wake_up -= fn_diff; fn_update = current_fn; } if(time_to_wake_up == 0) { // Schedule CR meas position for "PNP period >= 1s" case if(l1pa_l1ps_com.pccch.pnp_period >= 216) { switch (state) { case PCHTOTAL: case TOTAL: { nbr_meas = cr_list_size; // Measures is going to start, set "session_done" flag. // "session_done" flag must be set at the begining of a meas. session // in order to be able to detect crossing of the 4s boundary session_done = 1; } break; case NULL_MEAS: { nbr_meas = 0; } break; } } // Schedule CR meas position for "PNP period < 1s" case else { switch (state) { case NULL_MEAS: { nbr_meas = 0; } break; case MEAS: { UWORD8 max_nbmeas; WORD16 tpu_win_rest; UWORD16 power_meas_split; // Compute how many BP_SPLIT remains for cr list meas // Rem: we take into account the SYNTH load for 1st RX in next frame. // WARNING: only one RX activity is considered in next paging block !!! tpu_win_rest = FRAME_SPLIT - (RX_LOAD + l1_config.params.rx_synth_load_split); power_meas_split = (l1_config.params.rx_synth_load_split + PWR_LOAD); max_nbmeas = 0; while(tpu_win_rest >= power_meas_split) { max_nbmeas ++; tpu_win_rest -= power_meas_split; } if (max_nbmeas > NB_MEAS_MAX_GPRS) max_nbmeas = NB_MEAS_MAX_GPRS; // There is no more PPCH block before end of 1s period. // End remaining carriers. nbr_meas = Min(remain_carrier, 4*max_nbmeas); // Measures is going to start, set "session_done" flag. // "session_done_1s" flag must be set at the begining of a meas. session // in order to be able to detect crossing of the 1s boundary session_done_1s = 1; } break; case MEASTOTAL: { nbr_meas = remain_carrier; // Measures is going to start, set "session_done" flag. // "session_done_1s" flag must be set at the begining of a meas. session // in order to be able to detect crossing of the 1s boundary session_done_1s = 1; } break; } } // End of else ("PNP period < 1s" case) } /* --------------------------------------------------------------------*/ /* CTRL and READ phase carrying out. "nbr_meas" measures are performed */ /* --------------------------------------------------------------------*/ // ******************** // READ task if needed // ******************** if(l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd) // Background measurements.... // A measure CTRL was performed 2 tdma earlier, read result now. { UWORD16 radio_freq_read; UWORD8 pm_read[NB_MEAS_MAX_GPRS]; UWORD8 i; #define next_to_read l1pa_l1ps_com.cr_freq_list.next_to_read // When a READ is performed we set dsp_r_page_used flag to // switch the read page. l1s_dsp_com.dsp_r_page_used = TRUE; l1_check_com_mismatch(CR_MEAS_ID); // Read power measurement result from DSP/MCU GPRS interface l1pddsp_meas_read(l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd, pm_read); for(i=0; i<l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd; i++) { radio_freq_read = l1pa_l1ps_com.cres_freq_list.alist->freq_list[next_to_read]; // Traces and debug. // ****************** #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_READ_CR_MEAS, radio_freq_read); #endif l1_check_pm_error(pm_read[i], CR_MEAS_ID); // Get Input level corresponding to the used IL and pm result. IL_for_rxlev = l1pctl_pgc(((UWORD8)(pm_read[i])), l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].il, l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i].lna, radio_freq_read); #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) RTTL1_FILL_MON_MEAS(pm_read[i], IL_for_rxlev, CR_MEAS_ID, radio_freq_read) #endif // Check that cr_msg hasn't been erased. if (cr_msg == NULL) { cr_msg = os_alloc_sig(sizeof(T_L1P_CR_MEAS_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) cr_msg->SignalCode = L1P_CR_MEAS_DONE; } #if (GSM_IDLE_RAM != 1) // Fill reporting message. ((T_L1P_CR_MEAS_DONE*)(cr_msg->SigP))-> ncell_meas[next_to_read].rxlev = l1s_encode_rxlev(IL_for_rxlev); #else // Fill reporting message. l1ps.ncell_meas_rxlev[next_to_read] = (WORD8) l1s_encode_rxlev(IL_for_rxlev); #endif // Increment "next_to_read" field for next measurement... if(++next_to_read >= cr_list_size) next_to_read = 0; }//end for // ********** // Reporting // ********** if(next_to_read == 0) { #if (GSM_IDLE_RAM == 1) // Check if memory for L1P_CR_MEAS_DONE msg is allocated if (cr_msg == NULL) { if (!READ_TRAFFIC_CONT_STATE) CSMI_TrafficControllerOn(); cr_msg = os_alloc_sig(sizeof(T_L1P_CR_MEAS_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) cr_msg->SignalCode = L1P_CR_MEAS_DONE; } for(i=0; i<cr_list_size; i++) { ((T_L1P_CR_MEAS_DONE*)(cr_msg->SigP))->ncell_meas[i].rxlev = l1ps.ncell_meas_rxlev[i]; // Fill reporting message. } #endif // Fill BA identifier field. ((T_L1P_CR_MEAS_DONE*)(cr_msg->SigP))->list_id = l1pa_l1ps_com.cres_freq_list.alist->list_id; ((T_L1P_CR_MEAS_DONE*)(cr_msg->SigP))->nmeas = cr_list_size; // Compute and Fill reporting period value if(l1s.actual_time.fn > reporting_period) reporting_period = l1s.actual_time.fn - reporting_period; else reporting_period = l1s.actual_time.fn - reporting_period + MAX_FN; ((T_L1P_CR_MEAS_DONE*)(cr_msg->SigP))->reporting_period = (UWORD16)reporting_period; reporting_period = l1s.actual_time.fn; // send L1P_CR_MEAS_DONE message... os_send_sig(cr_msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) // Reset pointer for debugg. cr_msg = NULL; } // Trigger measurement scheduler when meas. session is completed. // Note: A meas. session includes all carriers of the list "PNP period >= 1s case" // or only a sub-set of the CR freq list "PNP period < 1s case" if(!(l1pa_l1ps_com.cr_freq_list.ms_ctrl) && !(l1pa_l1ps_com.cr_freq_list.ms_ctrl_d)) schedule_trigger = TRUE; }// end of READ #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) #endif // ********** // CTRL task // ********** #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_AWAITED) { #endif if (nbr_meas > 0) { if(l1s.forbid_meas < 2) { UWORD8 max_nbmeas; UWORD8 nb_meas_to_perform; UWORD16 radio_freq_ctrl; UWORD8 i; UWORD8 pw_position = 0; // indicates first time slot in frame available for PM WORD16 tpu_win_rest; UWORD16 power_meas_split; #define next_to_ctrl l1pa_l1ps_com.cr_freq_list.next_to_ctrl // Compute how many BP_SPLIT remains for cr list meas // Rem: we take into account the SYNTH load for 1st RX in next frame. tpu_win_rest = FRAME_SPLIT - l1s.tpu_win; power_meas_split = (l1_config.params.rx_synth_load_split + PWR_LOAD); max_nbmeas = 0; while(tpu_win_rest >= power_meas_split) { max_nbmeas ++; tpu_win_rest -= power_meas_split; } // Compute number of PM allowed in the Frame // Test if we are on a Paging frame if(l1pa_l1ps_com.cr_freq_list.pnp_ctrl > 0) pw_position = 1; // Test if PRACH controlled in the same frame if(l1s.tpu_win >= ((3 * BP_SPLIT) + l1_config.params.tx_ra_load_split + l1_config.params.rx_synth_load_split)) { pw_position = 4; } // Compute Number of measures to perform nb_meas_to_perform = cr_list_size - next_to_ctrl; if(nb_meas_to_perform > max_nbmeas) nb_meas_to_perform = max_nbmeas; if(nb_meas_to_perform > NB_MEAS_MAX_GPRS) nb_meas_to_perform = NB_MEAS_MAX_GPRS; if (nb_meas_to_perform > nbr_meas) nb_meas_to_perform = nbr_meas; for(i=0; i<nb_meas_to_perform; i++) { UWORD8 lna_off; WORD8 agc; UWORD8 input_level; #if (L1_FF_MULTIBAND == 1) UWORD16 operative_radio_freq; #endif radio_freq_ctrl = l1pa_l1ps_com.cres_freq_list.alist->freq_list[next_to_ctrl]; #if (L1_FF_MULTIBAND == 0) // Get AGC according to the last known IL. input_level = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset].input_level; agc = Cust_get_agc_from_IL(radio_freq_ctrl,input_level >> 1, PWR_ID); lna_off = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset].lna_off; // Memorize the IL and LNA used for AGC setting. //l1pa_l1ps_com.cr_freq_list.used_il_lna[i] = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset]; l1pa_l1ps_com.cr_freq_list.used_il_lna[i].il = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset].input_level; l1pa_l1ps_com.cr_freq_list.used_il_lna[i].lna = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset].lna_off; #else // L1_FF_MULTIBAND = 1 below operative_radio_freq = l1_multiband_radio_freq_convert_into_operative_radio_freq(radio_freq_ctrl); input_level = l1a_l1s_com.last_input_level[operative_radio_freq].input_level; lna_off = l1a_l1s_com.last_input_level[operative_radio_freq].lna_off; agc = Cust_get_agc_from_IL(radio_freq_ctrl,input_level >> 1, PWR_ID); // Memorize the IL and LNA used for AGC setting. //l1pa_l1ps_com.cr_freq_list.used_il_lna[i] = l1a_l1s_com.last_input_level[radio_freq_ctrl - l1_config.std.radio_freq_index_offset]; l1pa_l1ps_com.cr_freq_list.used_il_lna[i].il = l1a_l1s_com.last_input_level[operative_radio_freq].input_level; l1pa_l1ps_com.cr_freq_list.used_il_lna[i].lna = l1a_l1s_com.last_input_level[operative_radio_freq].lna_off; #endif // #if (L1_FF_MULTIBAND == 0) else #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_CTRL_CR_MEAS, -1); #endif #if(RF_FAM == 61) // Locosto DCO #if (PWMEAS_IF_MODE_FORCE == 0) cust_get_if_dco_ctl_algo(&dco_algo_ctl_pw_temp, &if_ctl, (UWORD8) L1_IL_VALID , input_level, radio_freq_ctrl, if_threshold); #else if_ctl = IF_120KHZ_DSP; dco_algo_ctl_pw_temp = DCO_IF_0KHZ; #endif dco_algo_ctl_pw |= ( (dco_algo_ctl_pw_temp & 0x03)<< (i*2)); #endif // tpu pgm: 1 measurement only. l1dtpu_meas(radio_freq_ctrl, agc, lna_off, l1s.tpu_win, l1s.tpu_offset,INACTIVE #if(RF_FAM == 61) ,L1_AFC_SCRIPT_MODE ,if_ctl #endif ); // increment carrier counter for next measurement... if(++next_to_ctrl >= cr_list_size) next_to_ctrl = 0; #if L2_L3_SIMUL #if (DEBUG_TRACE == BUFFER_TRACE_OFFSET_NEIGH) buffer_trace(4, l1s.actual_time.fn, radio_freq_ctrl, l1s.tpu_win, 0); #endif #endif // Increment tpu window identifier. l1s.tpu_win += (l1_config.params.rx_synth_load_split + PWR_LOAD); } // End for(...nb_meas_to_perform) #if(RF_FAM == 61) l1ddsp_load_dco_ctl_algo_pw(dco_algo_ctl_pw); #endif // Program DSP, in order to performed nb_meas_to_perform measures // Second argument specifies if a Rx burst will be received in this frame l1pddsp_meas_ctrl(nb_meas_to_perform, pw_position); // Update d_debug timer l1s_dsp_com.dsp_db_w_ptr->d_debug = (l1s.debug_time + 2) ; // Flag measurement control. // ************************** // Set flag "ms_ctrl" to nb_meas_to_perform. // It will be used as 2 tdma delayed to trigger Read phase. l1pa_l1ps_com.cr_freq_list.ms_ctrl = nb_meas_to_perform; // Flag DSP and TPU programmation. // ******************************** // Set "CTRL_MS" flag in the controle flag register. l1s.tpu_ctrl_reg |= CTRL_MS; l1s.dsp_ctrl_reg |= CTRL_MS; // Update nbr_meas nbr_meas -= nb_meas_to_perform; // Update remainig measurements to performed according meas done //remain_carrier -= nb_meas_to_perform; } // End of test on is PBCCHS, FB/SB or BCCHN task active } //end ctrl #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_AWAITED) if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif // If it's time, update time to next measures position and state // Two cases are considered: "pnp_period >= 1s" and "pnp_period < 1s" if(schedule_trigger) { BOOL condition = FALSE; schedule_trigger = FALSE; // Compute time to next session of measures for "PNP period >= 1s" case if(l1pa_l1ps_com.pccch.pnp_period >= 216) { while(!condition) { switch(state) { case NULL_MEAS: { #if (GSM_IDLE_RAM != 1) // Check if memory for L1P_CR_MEAS_DONE msg is allocated if (cr_msg == NULL) { cr_msg = os_alloc_sig(sizeof(T_L1P_CR_MEAS_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) cr_msg->SignalCode = L1P_CR_MEAS_DONE; } #endif if((l1pa_l1ps_com.pccch.time_to_pnp > ((866 * session_done) + time_to_4s)) && (l1pa_l1ps_com.pccch.pnp_period >= 866)) { state = TOTAL; time_to_wake_up = (433 + time_to_4s * session_done); condition = TRUE; } else { state = PCHTOTAL; time_to_wake_up = l1pa_l1ps_com.pccch.time_to_pnp; condition = TRUE; } } break; case TOTAL: case PCHTOTAL: state = NULL_MEAS; break; } } } // End of "PNP period >= 1s" case else // Compute time to next session of measures for "PNP period < 1s" case { while(!condition) { switch(state) { case NULL_MEAS: { // Let's assume a small frequency list size // and a PNP period such that PM are performed // on first PPCH block and then stopped. PM activity // must be re-scheduled at the end of PPCH block. if((l1pa_l1ps_com.pccch.time_to_pnp < time_to_1s) && !(init_meas)) { time_to_wake_up = l1pa_l1ps_com.pccch.time_to_pnp; schedule_trigger = TRUE; condition = TRUE; } else { #if (GSM_IDLE_RAM == 0) // Check if memory for L1P_CR_MEAS_DONE msg is allocated if (cr_msg == NULL) { cr_msg = os_alloc_sig(sizeof(T_L1P_CR_MEAS_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) cr_msg->SignalCode = L1P_CR_MEAS_DONE; } #endif state = MEAS; time_to_wake_up = l1pa_l1ps_com.pccch.time_to_pnp; remain_carrier = (WORD8)cr_list_size; condition = TRUE; } } break; case MEAS: { UWORD8 max_nbmeas; WORD16 tpu_win_rest; UWORD16 power_meas_split; // Compute how many BP_SPLIT remains for cr list meas // Rem: we take into account the SYNTH load for 1st RX in next frame. // WARNING: only one RX activity is considered in next paging block !!! tpu_win_rest = FRAME_SPLIT - (RX_LOAD + l1_config.params.rx_synth_load_split); power_meas_split = (l1_config.params.rx_synth_load_split + PWR_LOAD); max_nbmeas = 0; while(tpu_win_rest >= power_meas_split) { max_nbmeas ++; tpu_win_rest -= power_meas_split; } if (max_nbmeas > NB_MEAS_MAX_GPRS) max_nbmeas = NB_MEAS_MAX_GPRS; // Update number of remaining carrier to measure. // Note: std.nbmeas provides max nbr of PM / TDMA remain_carrier -= 4 * max_nbmeas; if(remain_carrier <= 0) state = NULL_MEAS; else { if((l1pa_l1ps_com.pccch.time_to_pnp >= time_to_1s) || !(session_done_1s)) { state = MEASTOTAL; time_to_wake_up = 1; condition = TRUE; } else { time_to_wake_up = l1pa_l1ps_com.pccch.time_to_pnp; condition = TRUE; } } } break; case MEASTOTAL: { #if (GSM_IDLE_RAM != 1) // Check if memory for L1P_CR_MEAS_DONE msg is allocated if (cr_msg == NULL) { cr_msg = os_alloc_sig(sizeof(T_L1P_CR_MEAS_DONE)); DEBUGMSG(status,NU_ALLOC_ERR) cr_msg->SignalCode = L1P_CR_MEAS_DONE; } #endif state = MEAS; time_to_wake_up = l1pa_l1ps_com.pccch.time_to_pnp; remain_carrier = (WORD8)cr_list_size; condition = TRUE; } break; } } // End of while } // End of else ("PNP period < 1s" case) } // End of if(schedule_trigger) #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) if (l1ps_macs_com.usf_status != USF_AWAITED) { #endif // Update time to next L1S task if((l1pa_l1ps_com.cr_freq_list.ms_ctrl) || (l1pa_l1ps_com.cr_freq_list.ms_ctrl_d)) { // Still some measurement results to get from DSP l1a_l1s_com.time_to_next_l1s_task = 0; } else { // No more measurements to read, next session of meas must // be at time_to_wake_up Select_min_time(time_to_wake_up, l1a_l1s_com.time_to_next_l1s_task); } // Clear controlled flag pnp_ctrl. //------------------------------- l1pa_l1ps_com.cr_freq_list.pnp_ctrl = 0; // C W R pipeline management. //--------------------------- l1pa_l1ps_com.cr_freq_list.ms_ctrl_dd = l1pa_l1ps_com.cr_freq_list.ms_ctrl_d; l1pa_l1ps_com.cr_freq_list.ms_ctrl_d = l1pa_l1ps_com.cr_freq_list.ms_ctrl; l1pa_l1ps_com.cr_freq_list.ms_ctrl = 0; // C W R pipeline management. //--------------------------- { UWORD8 i; for(i=0; i<NB_MEAS_MAX_GPRS; i++) { l1pa_l1ps_com.cr_freq_list.used_il_lna_dd[i] = l1pa_l1ps_com.cr_freq_list.used_il_lna_d[i]; l1pa_l1ps_com.cr_freq_list.used_il_lna_d [i] = l1pa_l1ps_com.cr_freq_list.used_il_lna [i]; } } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_AWAITED) #endif } // End of if: P_CRMS_MEAS enable and associated semaphore = 0. } //#pragma GSM_IDLE_DUPLICATE_FOR_INTERNAL_RAM_END #endif #if (MOVE_IN_INTERNAL_RAM == 0) // Must be followed by the pragma used to duplicate the funtion in internal RAM //#pragma DUPLICATE_FOR_INTERNAL_RAM_START /*-------------------------------------------------------*/ /* l1ps_transfer_meas_manager() */ /*-------------------------------------------------------*/ /* */ /* Description: */ /* ------------ */ /* Whilst in Packet Transfer mode, MS shall continuously */ /* monitor all the BCCH carriers as indicated by a */ /* frequency list (BA(GPRS), Network Control frequency */ /* list and Extended list) and the BCCH carrier of the */ /* serving cell. Received signal level is used to monitor*/ /* the specified neighbour BCCH carriers. */ /* */ /* Receive signal level measurement samples shall be */ /* performed according to the following conditions: */ /* */ /* 1) At least 1 measure shall be done every TDMA, */ /* 2) Up to 2 TDMA frames per PDCH multiframe may be */ /* omitted if required for BSIC decoding, */ /* 3) Running average value (RLA_P) is based on a 5s */ /* period and includes at least 5 measure samples, */ /* 4) The same number of measures shall be taken for all */ /* BCCH carriers except: */ /* i) For the Serving Cell, where at least 6 measures */ /* shall be taken per MF52, */ /* ii) if PC_MEAS_CHAN indicates that power control */ /* measures shall be made on BCCH. */ /* 5) Measures used to compute RLA_P shall as far as */ /* possible be uniformly distributed, */ /*-------------------------------------------------------*/ void l1ps_transfer_meas_manager() { UWORD8 IL_for_rxlev; static xSignalHeaderRec *tcr_msg = NULL; static BOOL tcr_meas_removed = FALSE; #define tcr_next_to_read l1pa_l1ps_com.tcr_freq_list.tcr_next_to_read #define tcr_next_to_ctrl l1pa_l1ps_com.tcr_freq_list.tcr_next_to_ctrl #define last_stored_tcr_to_read l1pa_l1ps_com.tcr_freq_list.last_stored_tcr_to_read #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif // Test if task is disabled and cr_msg != NULL, then de-allocate memory if(tcr_msg != NULL) { if(!(l1pa_l1ps_com.l1ps_en_meas & P_TCRMS_MEAS) && !(l1pa_l1ps_com.meas_param & P_TCRMS_MEAS)) { // Neighbour measurement process has been stopped by L3 // Deallocate memory for the received message if msg not forwarded to L3. // ---------------------------------------------------------------------- os_free_sig(tcr_msg); DEBUGMSG(status,NU_DEALLOC_ERR) tcr_msg = NULL; } } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) #endif if(l1pa_l1ps_com.l1ps_en_meas & P_TCRMS_MEAS) { #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif // Increment l1pa_l1ps_com.tcr_freq_list.cres_meas_report if(++l1pa_l1ps_com.tcr_freq_list.cres_meas_report > 103) l1pa_l1ps_com.tcr_freq_list.cres_meas_report = 0; // Check if it's first time, Neighbour Measurement process is launched. // Then initialize fn_report counter and reset semaphore. if(l1pa_l1ps_com.meas_param & P_TCRMS_MEAS) { // Initialize counter used to report measurements l1pa_l1ps_com.tcr_freq_list.cres_meas_report = 0; // Reset Neighbour Measurements semaphore l1pa_l1ps_com.meas_param &= P_TCRMS_MEAS_MASK; } //==================================================== // RESET MEASUREMENT MACHINES WHEN SYNCHRO EXECUTED. //==================================================== if(l1s.tpu_ctrl_reg & CTRL_SYNC) // SYNCHRO task has been executed. // -> Reset measures made on serving cell, // -> Rewind pointer used in Neighbour Cell measurement, // -> return. { // Reset Neighbour Cell measurement machine. // Rewind "next_to_ctrl" counter to come back to the next carrier to // measure. tcr_next_to_ctrl = tcr_next_to_read; // Reset flags. l1pa_l1ps_com.tcr_freq_list.ms_ctrl = 0; l1pa_l1ps_com.tcr_freq_list.ms_ctrl_d = 0; l1pa_l1ps_com.tcr_freq_list.ms_ctrl_dd = 0; // Reset measures made on beacon frequency. l1pa_l1ps_com.tcr_freq_list.beacon_meas = 0; } // ******************* // Message Allocation // ******************* // The reporting message must be allocated before READ phase. if(l1pa_l1ps_com.tcr_freq_list.cres_meas_report == 2) { // Memory allocation if (tcr_msg == NULL) { // alloc L1P_TCR_MEAS_DONE message... tcr_msg = os_alloc_sig(sizeof(T_MPHP_TCR_MEAS_IND)); DEBUGMSG(status,NU_ALLOC_ERR) tcr_msg->SignalCode = L1P_TCR_MEAS_DONE; } l1pa_l1ps_com.tcr_freq_list.first_pass_flag = TRUE; } //------------------------------------------------------ // READ and CTRL phase of the Neighbour Measurement task //------------------------------------------------------ //----------- // READ phase //----------- // Test if Measurment has been removed (ms_ctrl_d forced to 0) during // previous frame, then switch DSP read page. if (tcr_meas_removed) { l1s_dsp_com.dsp_r_page_used = TRUE; tcr_meas_removed = FALSE; } // Background measurements.... // A measurement controle was performed 2 tdma earlier, read result now!! if(l1pa_l1ps_com.tcr_freq_list.ms_ctrl_dd != 0) { UWORD16 radio_freq_read; UWORD8 pm_read; #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_READ_TCR_MEAS, (UWORD32)(-1)); #endif l1_check_com_mismatch(TCR_MEAS_ID); // When a read is performed, we set dsp_r_page_used flag to // switch the read page l1s_dsp_com.dsp_r_page_used = TRUE; // Read power measurement result from DSP/MCU GPRS interface l1pddsp_meas_read(l1pa_l1ps_com.tcr_freq_list.ms_ctrl_dd, &pm_read); l1_check_pm_error(pm_read, TCR_MEAS_ID); radio_freq_read = l1pa_l1ps_com.cres_freq_list.alist->freq_list[tcr_next_to_read]; // Get Input level corresponding to the used IL and pm result. IL_for_rxlev = l1pctl_pgc(((UWORD8) (pm_read)), l1pa_l1ps_com.tcr_freq_list.used_il_lna_dd.il, l1pa_l1ps_com.tcr_freq_list.used_il_lna_dd.lna, radio_freq_read); #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) RTTL1_FILL_MON_MEAS(pm_read, IL_for_rxlev, TCR_MEAS_ID, radio_freq_read) #endif if(l1pa_l1ps_com.tcr_freq_list.first_pass_flag) { // Fill reporting message: Store RXLEV ((T_L1P_TCR_MEAS_DONE*)(tcr_msg->SigP))->acc_level[tcr_next_to_read] = l1s_encode_rxlev(IL_for_rxlev); ((T_L1P_TCR_MEAS_DONE*)(tcr_msg->SigP))->acc_nbmeas[tcr_next_to_read] = 1; } else { // Fill reporting message: Accumulate RXLEV ((T_L1P_TCR_MEAS_DONE*)(tcr_msg->SigP))->acc_level[tcr_next_to_read] += l1s_encode_rxlev(IL_for_rxlev); ((T_L1P_TCR_MEAS_DONE*)(tcr_msg->SigP))->acc_nbmeas[tcr_next_to_read] += 1; } // Increment "next_to_read" field for next measurement... if(++tcr_next_to_read >= l1pa_l1ps_com.cres_freq_list.alist->nb_carrier) { tcr_next_to_read = 0; } // First pass has been completed on all BA list, reset "first_pass_flag" if(tcr_next_to_read == last_stored_tcr_to_read) l1pa_l1ps_com.tcr_freq_list.first_pass_flag = FALSE; } // End of READ phase // ************************ // Reporting & List Update // ************************ if(l1pa_l1ps_com.tcr_freq_list.cres_meas_report == 1) { if(tcr_msg != NULL) { // Fill TCR list identifier field. ((T_L1P_TCR_MEAS_DONE*)(tcr_msg->SigP))->list_id = l1pa_l1ps_com.cres_freq_list.alist->list_id; // send L1P_TCR_MEAS_DONE message... os_send_sig(tcr_msg, L1C1_QUEUE); DEBUGMSG(status,NU_SEND_QUEUE_ERR) // Reset pointer for debugg. tcr_msg = NULL; } // Update Frequency list pointer and reset new list flag if(l1pa_l1ps_com.tcr_freq_list.new_list_present) { //Update Frequency list pointer l1pa_l1ps_com.cres_freq_list.alist = l1pa_l1ps_com.cres_freq_list.flist; // Test if a Meas has been controlled in previous frame // Then set tcr_meas_removed flag in order to switch DSP read page in next frame if(l1pa_l1ps_com.tcr_freq_list.ms_ctrl_d != 0) { tcr_meas_removed = TRUE; } // Reset pointer tcr_next_to_ctrl = 0; tcr_next_to_read = 0; l1pa_l1ps_com.tcr_freq_list.ms_ctrl_d = 0; // Reset New list flag l1pa_l1ps_com.tcr_freq_list.new_list_present = FALSE; } // While reporting, save Last "tcr_next_to_read" value to know when reset "first_pass_flag" last_stored_tcr_to_read = tcr_next_to_read; } //----------- // CTRL phase //----------- // CTRL phase is divided in two parts according measures allocated by MACS. // CTRL phase must then be exported in CTRL PDTCH function except for the Idle // frame where no PDTCH are programmed. // A measure can be performed during the idle frame, only if FB/SB/PTCCH // and Interference Measurement task is not active. if(!(l1pa_l1ps_com.meas_param & P_TCRMS_MEAS)) { if((l1s.actual_time.t2 == 24) || (l1s.actual_time.t2 == 11)) { if(l1s.forbid_meas == 0) { #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_CTRL_TCR_MEAS_2,(UWORD32)(-1)); #endif l1ps_tcr_ctrl(0); } } } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) #endif #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_AWAITED) { #endif // Pipe Manager l1pa_l1ps_com.tcr_freq_list.ms_ctrl_dd = l1pa_l1ps_com.tcr_freq_list.ms_ctrl_d; l1pa_l1ps_com.tcr_freq_list.ms_ctrl_d = l1pa_l1ps_com.tcr_freq_list.ms_ctrl; l1pa_l1ps_com.tcr_freq_list.ms_ctrl = 0; #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_AWAITED) #endif } // End of if(l1pa_l1ps_com.l1ps_en_meas & P_TCRMS_MEAS) /*****************************/ /* PC_MEAS_CHAN measurements */ /*****************************/ // If PC_MEAS_CHAN = 1, then BCCH serving cell carrier must be // measured at least 6 times per MF52. // CTRL of Serving Cell Carrier is performed two TDMA earlier. if(l1pa_l1ps_com.transfer.aset->pc_meas_chan == FALSE) { #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_IT_DSP) { #endif if(l1s.tpu_ctrl_reg & CTRL_SYNC) // SYNCHRO task has been executed. { l1ps.pc_meas_chan_ctrl = FALSE; } //----------- // READ phase //----------- if ((l1ps.pc_meas_chan_ctrl == TRUE) && ((l1s.actual_time.t2 == 3) || (l1s.actual_time.t2 == 11) || (l1s.actual_time.t2 == 20))) { UWORD8 pm_read; l1_check_com_mismatch(PC_MEAS_CHAN_ID); // When a read is performed, we set dsp_r_page_used flag to // switch the read page l1s_dsp_com.dsp_r_page_used = TRUE; // Read power measurement result from DSP/MCU GPRS interface l1pddsp_meas_read(1, &pm_read); #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_READ_PC_MEAS_CHAN,(UWORD32)(-1)); #endif l1_check_pm_error(pm_read, PC_MEAS_CHAN_ID); l1ps.pc_meas_chan_ctrl = FALSE; // Get Input level corresponding to the used IL and pm result. IL_for_rxlev = l1pctl_pgc(((UWORD8 )(pm_read)), l1pa_l1ps_com.tcr_freq_list.used_il_lna_dd.il, l1pa_l1ps_com.tcr_freq_list.used_il_lna_dd.lna, l1a_l1s_com.Scell_info.radio_freq); #if (TRACE_TYPE == 1) || (TRACE_TYPE == 4) RTTL1_FILL_MON_MEAS(pm_read, IL_for_rxlev, PC_MEAS_CHAN_ID, l1a_l1s_com.Scell_info.radio_freq) #endif if (l1a_l1s_com.mode == PACKET_TRANSFER_MODE) // Store RXLEV, before to pass it to maca_power_control() function.. l1pa_l1ps_com.tcr_freq_list.beacon_meas = l1s_encode_rxlev(IL_for_rxlev); } //----------- // CTRL phase //----------- // In two phase access, PC_MEAS_CHAN measurements can be done... if((l1a_l1s_com.l1s_en_task[SINGLE] == TASK_ENABLED) && (l1pa_l1ps_com.transfer.aset->allocated_tbf == TWO_PHASE_ACCESS)) if (l1s.task_status[NP].current_status != ACTIVE) // avoid conflict with Normal Paging if (l1s.task_status[EP].current_status != ACTIVE) // avoid conflict with Extended Paging { // Measurement on the beacon if((l1s.actual_time.t2 == 1) || (l1s.actual_time.t2 == 9) || (l1s.actual_time.t2 == 18)) { // Measurement programming // ts 4 is specified for DSP interface ONLY because the power activity // must be programmed after RX and/or TX activity (no multislot) #if (TRACE_TYPE!=0) && (TRACE_TYPE!=5) trace_fct(CST_CTRL_PC_MEAS_CHAN, (UWORD32)(-1)); #endif l1ps_bcch_meas_ctrl(4); } } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_IT_DSP) #endif } // End of Meas made on BCCH serving cell #if FF_L1_IT_DSP_USF if (l1ps_macs_com.usf_status != USF_AWAITED) { #endif if((l1pa_l1ps_com.l1ps_en_meas & P_TCRMS_MEAS) || (l1ps.pc_meas_chan_ctrl == TRUE)) { // C W R pipeline management. //--------------------------- l1pa_l1ps_com.tcr_freq_list.used_il_lna_dd = l1pa_l1ps_com.tcr_freq_list.used_il_lna_d; l1pa_l1ps_com.tcr_freq_list.used_il_lna_d = l1pa_l1ps_com.tcr_freq_list.used_il_lna; } #if FF_L1_IT_DSP_USF } // if (l1ps_macs_com.usf_status != USF_AWAITED) #endif } //#pragma DUPLICATE_FOR_INTERNAL_RAM_END #endif // MOVE_IN_INTERNAL_RAM //#pragma DUPLICATE_FOR_INTERNAL_RAM_START #endif //#pragma DUPLICATE_FOR_INTERNAL_RAM_END