FreeCalypso > hg > fc-magnetite
view src/cs/layer1/p_include/l1p_sign.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 945cf7f506b2 |
children |
line wrap: on
line source
/************* Revision Controle System Header ************* * GSM Layer 1 software * L1P_SIGN.H * * Filename l1p_sign.h * Copyright 2003 (C) Texas Instruments * ************* Revision Controle System Header *************/ #define P_GPRS ( P_L1C + 2 ) // Messages Packet Transfer <-> L1A #define MPHP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 1 ) #define MPHP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 2 ) #define MPHP_STOP_SINGLE_BLOCK_REQ ( ( P_GPRS << 8 ) | 3 ) #define MPHP_STOP_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 4 ) #define L1P_SINGLE_BLOCK_CON ( ( P_GPRS << 8 ) | 5 ) #define MPHP_ASSIGNMENT_REQ ( ( P_GPRS << 8 ) | 6 ) #define MPHP_ASSIGNMENT_CON ( ( P_GPRS << 8 ) | 7 ) #define MPHP_TBF_RELEASE_REQ ( ( P_GPRS << 8 ) | 8 ) #define MPHP_TBF_RELEASE_CON ( ( P_GPRS << 8 ) | 9 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_REQ ( ( P_GPRS << 8 ) | 10 ) #define MPHP_REPEAT_UL_FIXED_ALLOC_CON ( ( P_GPRS << 8 ) | 11 ) #define MPHP_PDCH_RELEASE_REQ ( ( P_GPRS << 8 ) | 12 ) #define MPHP_PDCH_RELEASE_CON ( ( P_GPRS << 8 ) | 13 ) #define MPHP_TIMING_ADVANCE_REQ ( ( P_GPRS << 8 ) | 14 ) #define MPHP_TIMING_ADVANCE_CON ( ( P_GPRS << 8 ) | 15 ) #define MPHP_UPDATE_PSI_PARAM_REQ ( ( P_GPRS << 8 ) | 16 ) #define MPHP_UPDATE_PSI_PARAM_CON ( ( P_GPRS << 8 ) | 17 ) #define MPHP_RA_REQ ( ( P_GPRS << 8 ) | 18 ) #define MPHP_RA_CON ( ( P_GPRS << 8 ) | 19 ) #define MPHP_RA_STOP_REQ ( ( P_GPRS << 8 ) | 20 ) #define MPHP_RA_STOP_CON ( ( P_GPRS << 8 ) | 21 ) #define MPHP_POLLING_RESPONSE_REQ ( ( P_GPRS << 8 ) | 22 ) #define MPHP_POLLING_IND ( ( P_GPRS << 8 ) | 23 ) #define L1P_RA_DONE ( ( P_GPRS << 8 ) | 24 ) // Messages Packet Idle <-> L1A #define MPHP_START_PCCCH_REQ ( ( P_GPRS << 8 ) | 25 ) #define MPHP_STOP_PCCCH_REQ ( ( P_GPRS << 8 ) | 26 ) #define MPHP_STOP_PCCCH_CON ( ( P_GPRS << 8 ) | 27 ) #define MPHP_SCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 28 ) #define MPHP_SCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 29 ) #define MPHP_SCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 30 ) #define MPHP_CR_MEAS_REQ ( ( P_GPRS << 8 ) | 31 ) #define MPHP_CR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 32 ) #define MPHP_CR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 33 ) #define MPHP_INT_MEAS_REQ ( ( P_GPRS << 8 ) | 34 ) #define MPHP_INT_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 35 ) #define MPHP_INT_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 36 ) #define MPHP_NCELL_PBCCH_REQ ( ( P_GPRS << 8 ) | 37 ) #define MPHP_NCELL_PBCCH_STOP_REQ ( ( P_GPRS << 8 ) | 38 ) #define MPHP_NCELL_PBCCH_STOP_CON ( ( P_GPRS << 8 ) | 39 ) #define MPHP_DATA_IND ( ( P_GPRS << 8 ) | 40 ) #define MPHP_CR_MEAS_IND ( ( P_GPRS << 8 ) | 41 ) #define MPHP_INT_MEAS_IND ( ( P_GPRS << 8 ) | 42 ) #define MPHP_TINT_MEAS_IND ( ( P_GPRS << 8 ) | 43 ) #define MPHP_NCELL_PBCCH_IND ( ( P_GPRS << 8 ) | 44 ) #define MPHP_TCR_MEAS_REQ ( ( P_GPRS << 8 ) | 45 ) #define MPHP_TCR_MEAS_IND ( ( P_GPRS << 8 ) | 46 ) #define MPHP_TCR_MEAS_STOP_REQ ( ( P_GPRS << 8 ) | 47 ) #define MPHP_TCR_MEAS_STOP_CON ( ( P_GPRS << 8 ) | 48 ) /*** L1S -> L1A communication ***/ #define L1P_PALLC_INFO ( ( P_GPRS << 8) | 49) #define L1P_PNP_INFO ( ( P_GPRS << 8) | 50) #define L1P_PEP_INFO ( ( P_GPRS << 8) | 51) #define L1P_PBCCHS_INFO ( ( P_GPRS << 8) | 52) #define L1P_PACCH_INFO ( ( P_GPRS << 8) | 53) #define L1P_CR_MEAS_DONE ( ( P_GPRS << 8) | 54) #define L1P_TRANSFER_DONE ( ( P_GPRS << 8) | 55) #define L1P_TCR_MEAS_DONE ( ( P_GPRS << 8) | 56) #define L1P_TBF_RELEASED ( ( P_GPRS << 8) | 57) #define L1P_ITMEAS_IND ( ( P_GPRS << 8) | 58) #define L1P_POLL_DONE ( ( P_GPRS << 8) | 59) #define L1P_PDCH_RELEASED ( ( P_GPRS << 8) | 60) #define L1P_TA_CONFIG_DONE ( ( P_GPRS << 8) | 61) #define L1P_PBCCHN_INFO ( ( P_GPRS << 8) | 62) #define L1P_REPEAT_ALLOC_DONE ( ( P_GPRS << 8) | 63) #define L1P_ALLOC_EXHAUST_DONE ( ( P_GPRS << 8) | 64)