view src/cs/services/audio/audio_mode_save.c @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 838eeafb0051
children
line wrap: on
line source

/****************************************************************************/
/*                                                                          */
/*  File Name:  audio_mode_save.c                                           */
/*                                                                          */
/*  Purpose:  This file contains all the functions used for audio mode      */
/*            save services.                                                */
/*                                                                          */
/*  Version   0.1                                                           */
/*                                                                          */
/*  Date        Modification                                                */
/*  ------------------------------------------------------------------------*/
/*  14 Jan 2002  Create                                                     */
/*                                                                          */
/*  Author      Francois Mazard                                             */
/*                                                                          */
/* (C) Copyright 2001 by Texas Instruments Incorporated, All Rights Reserved*/
/****************************************************************************/

#include "rv/rv_defined_swe.h"

#ifdef RVM_AUDIO_MAIN_SWE
  #ifndef _WINDOWS
    #include "config/swconfig.cfg"
    #include "config/sys.cfg"
    #include "config/chipset.cfg"
  #endif

  #include "l1_confg.h"
  #include "rv/rv_general.h"
  #include "rvm/rvm_gen.h"
  #include "audio/audio_ffs_i.h"
  #include "audio/audio_api.h"
  #include "audio/audio_structs_i.h"
  #include "audio/audio_error_hdlr_i.h"
  #include "audio/audio_var_i.h"
  #include "audio/audio_messages_i.h"
  #include "audio/audio_macro_i.h"
  #include "rvf/rvf_target.h"
  #include "audio/audio_const_i.h"

  /* include the usefull L1 header */
  #ifdef _WINDOWS
    #define BOOL_FLAG
    //#define CHAR_FLAG
  #endif
  #include "l1_types.h"
  #include "l1audio_const.h"
  #include "l1audio_cust.h"
  #include "l1audio_defty.h"
  #include "l1audio_msgty.h"
  #include "l1audio_signa.h"
  #if TESTMODE
   #include "l1tm_defty.h"
  #endif
  #if (L1_GTT == 1)
    #include "l1gtt_const.h"
    #include "l1gtt_defty.h"
  #endif
  #include "l1_const.h"
  #include "l1_defty.h"
  #include "l1_msgty.h"
  #include "l1_signa.h"
  #ifdef _WINDOWS
    #define L1_ASYNC_C
  #endif
  #include "l1_varex.h"

  #ifdef _WINDOWS
    #include "audio/tests/audio_test.h"
  #endif

  /* external functions */
  /* read */
  extern T_AUDIO_RET audio_mode_voice_path_read               (T_AUDIO_VOICE_PATH_SETTING *data);
  extern T_AUDIO_RET audio_mode_microphone_mode_read          (INT8  *data);
  extern T_AUDIO_RET audio_mode_microphone_gain_read          (INT8  *data);
  extern T_AUDIO_RET audio_mode_microphone_extra_gain_read    (INT8  *data);
  extern T_AUDIO_RET audio_mode_microphone_output_bias_read   (INT8  *data);
  extern T_AUDIO_RET audio_mode_microphone_fir_read           (T_AUDIO_FIR_COEF *data);
  extern T_AUDIO_RET audio_mode_speaker_mode_read             (INT8  *data);
  extern T_AUDIO_RET audio_mode_speaker_gain_read             (INT8  *data);
  extern T_AUDIO_RET audio_mode_speaker_filter_read           (INT8  *data);
  extern T_AUDIO_RET audio_mode_speaker_fir_read              (T_AUDIO_FIR_COEF *data);
  extern T_AUDIO_RET audio_mode_speaker_buzzer_read           (INT8  *data);
  extern T_AUDIO_RET audio_mode_sidetone_gain_read            (INT8  *data);
  extern T_AUDIO_RET audio_mode_aec_read                      (T_AUDIO_AEC_CFG *data);
  extern T_AUDIO_RET audio_mode_speaker_volume_read           (T_AUDIO_SPEAKER_LEVEL *data);

  /* Define a macro to simplify the code */
  #define CHECK_STATUS(function, param)     if ( (function(&(param))) == AUDIO_ERROR ) \
                                            { \
                                              return(AUDIO_ERROR); \
                                            } \

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_mode_save_send_status                              */
  /*                                                                              */
  /*    Purpose:  This function sends the audio mdoe save status to the entity.   */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        status,                                                               */
  /*        return path                                                           */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  void audio_mode_save_send_status (T_AUDIO_RET status, T_RV_RETURN return_path)
  {
    void *p_send_message = NULL;
    T_RVF_MB_STATUS mb_status = RVF_RED;

    while (mb_status == RVF_RED)
    {
      /* allocate the message buffer */
      mb_status = rvf_get_buf (p_audio_gbl_var->mb_external,
                               sizeof(T_AUDIO_SAVE_DONE),
                               (T_RVF_BUFFER **) (&p_send_message));

      /* If insufficient resources, then report a memory error and abort.               */
      /* and wait until more ressource is given */
      if (mb_status == RVF_RED)
      {
        audio_mode_error_trace(AUDIO_ENTITY_NO_MEMORY);
        rvf_delay(RVF_MS_TO_TICKS(1000));
      }
    }
    /*fill the header of the message */
    ((T_AUDIO_SAVE_DONE *)(p_send_message))->os_hdr.msg_id =
      AUDIO_MODE_SAVE_DONE;

    /* fill the status parameters */
    ((T_AUDIO_SAVE_DONE *)(p_send_message))->status = status;

    if (return_path.callback_func == NULL)
    {
      /* send the message to the entity */
      rvf_send_msg (return_path.addr_id,
                    p_send_message);
    }
    else
    {
      /* call the callback function */
      (*return_path.callback_func)((void *)(p_send_message));
	  rvf_free_buf((T_RVF_BUFFER *)p_send_message);
    }
  }

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_mode_get                                           */
  /*                                                                              */
  /*    Purpose:  This function fill the audio mode structure.                    */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        Audio mode structure.                                                 */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        Status.                                                               */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  T_AUDIO_RET audio_mode_get(T_AUDIO_MODE *p_audio_mode)
  {
    /* Audio voice path */
    CHECK_STATUS(audio_mode_voice_path_read, p_audio_mode->audio_path_setting)

    /* Audio microphone mode */
    CHECK_STATUS(audio_mode_microphone_mode_read, p_audio_mode->audio_microphone_setting.mode)

    /* Audio microphone setting */
    switch (p_audio_mode->audio_microphone_setting.mode)
    {
      case AUDIO_MICROPHONE_HANDHELD:
      {
        CHECK_STATUS(audio_mode_microphone_gain_read, p_audio_mode->audio_microphone_setting.setting.handheld.gain)
        CHECK_STATUS(audio_mode_microphone_fir_read, p_audio_mode->audio_microphone_setting.setting.handheld.fir)
        CHECK_STATUS(audio_mode_microphone_output_bias_read, p_audio_mode->audio_microphone_setting.setting.handheld.output_bias)
        break;
      }
      case AUDIO_MICROPHONE_HANDFREE:
      {
        CHECK_STATUS(audio_mode_microphone_extra_gain_read, p_audio_mode->audio_microphone_setting.setting.handfree.extra_gain)
        CHECK_STATUS(audio_mode_microphone_fir_read, p_audio_mode->audio_microphone_setting.setting.handfree.fir)
        CHECK_STATUS(audio_mode_microphone_gain_read, p_audio_mode->audio_microphone_setting.setting.handfree.gain)
        CHECK_STATUS(audio_mode_microphone_output_bias_read, p_audio_mode->audio_microphone_setting.setting.handfree.output_bias)
        break;
      }
      case AUDIO_MICROPHONE_HEADSET:
      {
        CHECK_STATUS(audio_mode_microphone_gain_read, p_audio_mode->audio_microphone_setting.setting.headset.gain)
        CHECK_STATUS(audio_mode_microphone_fir_read, p_audio_mode->audio_microphone_setting.setting.headset.fir)
        CHECK_STATUS(audio_mode_microphone_output_bias_read, p_audio_mode->audio_microphone_setting.setting.headset.output_bias)
      }
    }

    /* Audio speaker mode */
    CHECK_STATUS(audio_mode_speaker_mode_read, p_audio_mode->audio_speaker_setting.mode)

    /* Audio speaker setting */
    switch(p_audio_mode->audio_speaker_setting.mode)
    {
      case AUDIO_SPEAKER_HANDHELD:
      {
        CHECK_STATUS(audio_mode_speaker_filter_read, p_audio_mode->audio_speaker_setting.setting.handheld.audio_filter)
        CHECK_STATUS(audio_mode_speaker_fir_read, p_audio_mode->audio_speaker_setting.setting.handheld.fir)
        CHECK_STATUS(audio_mode_speaker_gain_read, p_audio_mode->audio_speaker_setting.setting.handheld.gain)
        break;
      }
      case AUDIO_SPEAKER_HANDFREE:
      {
        CHECK_STATUS(audio_mode_speaker_filter_read, p_audio_mode->audio_speaker_setting.setting.handfree.audio_filter)
        CHECK_STATUS(audio_mode_speaker_fir_read, p_audio_mode->audio_speaker_setting.setting.handfree.fir)
        CHECK_STATUS(audio_mode_speaker_gain_read, p_audio_mode->audio_speaker_setting.setting.handfree.gain)
        break;
      }
      case AUDIO_SPEAKER_HEADSET:
      {
        CHECK_STATUS(audio_mode_speaker_filter_read, p_audio_mode->audio_speaker_setting.setting.headset.audio_filter)
        CHECK_STATUS(audio_mode_speaker_fir_read, p_audio_mode->audio_speaker_setting.setting.headset.fir)
        CHECK_STATUS(audio_mode_speaker_gain_read, p_audio_mode->audio_speaker_setting.setting.headset.gain)
        break;
      }
      case AUDIO_SPEAKER_BUZZER:
      {
        CHECK_STATUS(audio_mode_speaker_buzzer_read, p_audio_mode->audio_speaker_setting.setting.buzzer.activate)
        break;
      }
      case AUDIO_SPEAKER_HANDHELD_HANDFREE:
      {
        CHECK_STATUS(audio_mode_speaker_filter_read, p_audio_mode->audio_speaker_setting.setting.handheld_handfree.audio_filter)
        CHECK_STATUS(audio_mode_speaker_fir_read, p_audio_mode->audio_speaker_setting.setting.handheld_handfree.fir)
        CHECK_STATUS(audio_mode_speaker_gain_read, p_audio_mode->audio_speaker_setting.setting.handheld_handfree.gain)
        break;
      }
    }

    /* Audio spkear microphone loop setting */
    CHECK_STATUS(audio_mode_aec_read, p_audio_mode->audio_microphone_speaker_loop_setting.aec)
    CHECK_STATUS(audio_mode_sidetone_gain_read, p_audio_mode->audio_microphone_speaker_loop_setting.sidetone_gain)

    return(AUDIO_OK);
  }

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_volume_get                                         */
  /*                                                                              */
  /*    Purpose:  This function fill the audio volume structure.                  */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        Audio volume structure.                                               */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        Status.                                                               */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  T_AUDIO_RET audio_volume_get(T_AUDIO_SPEAKER_LEVEL *p_audio_volume)
  {
    CHECK_STATUS(audio_mode_speaker_volume_read, *p_audio_volume)

    return(AUDIO_OK);
  }

  /********************************************************************************/
  /*                                                                              */
  /*    Function Name:   audio_mode_save_manager                                  */
  /*                                                                              */
  /*    Purpose:  This function manage the audio mode save services.              */
  /*                                                                              */
  /*    Input Parameters:                                                         */
  /*        Audio message.                                                        */
  /*                                                                              */
  /*    Output Parameters:                                                        */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Note:                                                                     */
  /*        None.                                                                 */
  /*                                                                              */
  /*    Revision History:                                                         */
  /*        None.                                                                 */
  /*                                                                              */
  /********************************************************************************/
  void audio_mode_save_manager (T_RV_HDR *p_message)
  {
    T_AUDIO_MODE *p_audio_mode;
    T_AUDIO_SPEAKER_LEVEL audio_volume;
    T_RVF_MB_STATUS       mb_status;

    #ifdef _WINDOWS
      INT8  *p_read, *p_write;
      UINT8 i;
    #endif
    /* allocate the buffer for the current Audio mode */
    mb_status = rvf_get_buf (p_audio_gbl_var->mb_internal,
                             sizeof (T_AUDIO_MODE),
                             (T_RVF_BUFFER **) (&p_audio_mode));
    /* If insufficient resources, then report a memory error and abort.               */
    if (mb_status == RVF_RED)
    {
      AUDIO_SEND_TRACE("AUDIO MODE SAVE: not enough memory to allocate the audio mode buffer", RV_TRACE_LEVEL_ERROR);
      audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
      return;
    }

    /* Fill the audio mode structure */
    if ( (audio_mode_get(p_audio_mode)) == AUDIO_ERROR)
    {
      AUDIO_SEND_TRACE("AUDIO MODE SAVE: error in the the audio mode get function", RV_TRACE_LEVEL_ERROR);
      /* free the audio mode buffer */
      rvf_free_buf((T_RVF_BUFFER *)p_audio_mode);

      #ifndef _WINDOWS
        /* Close the files */
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_ffs_fd);
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd);
      #endif

      /* send the status message */
      audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
      return;
    }

    #ifndef _WINDOWS
      /* Save the audio mode structure to the FFS */
      if ( (ffs_write (((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_ffs_fd,
                      p_audio_mode,
                      sizeof(T_AUDIO_MODE))) < EFFS_OK )
      {
        AUDIO_SEND_TRACE("AUDIO MODE SAVE: impossible to save the current audio mode", RV_TRACE_LEVEL_ERROR);

        /* free the audio mode buffer */
        rvf_free_buf((T_RVF_BUFFER *)p_audio_mode);

        /* Close the files */
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_ffs_fd);
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd);

        /* send the status message */
        audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
        return;
      }

      /* Close the file */
      ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_ffs_fd);
    #else
      #if ((AUDIO_REGR == SW_COMPILED) || (AUDIO_MISC == SW_COMPILED))
        p_read = (INT8 *)(p_audio_mode);
        p_write = (INT8 *)(&(p_audio_test->audio_mode_2));

        for (i=0; i<sizeof(T_AUDIO_MODE); i++)
        {
          *p_write++ = *p_read++;
        }
      #endif
    #endif

    /* free the audio mode buffer */
    rvf_free_buf((T_RVF_BUFFER *)p_audio_mode);

    /* Fill the audio volume structure */
    if ( (audio_volume_get(&audio_volume)) == AUDIO_ERROR)
    {
      AUDIO_SEND_TRACE("AUDIO MODE SAVE: error in the the audio speaker volume get function", RV_TRACE_LEVEL_ERROR);
      #ifndef _WINDOWS
        /* Close the file */
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd);
      #endif

      /* send the status message */
      audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
      return;
    }

    #ifndef _WINDOWS
      /* Save the audio speaker volume structure to the FFS */
      if ( (ffs_write (((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd,
                      &audio_volume,
                      sizeof(T_AUDIO_SPEAKER_LEVEL))) < EFFS_OK )
      {
        AUDIO_SEND_TRACE("AUDIO MODE SAVE: impossible to save the current speaker volume", RV_TRACE_LEVEL_ERROR);

        /* Close the files */
        ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd);

        /* send the status message */
        audio_mode_save_send_status (AUDIO_ERROR, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
        return;
      }

      /* Close the file */
      ffs_close(((T_AUDIO_MODE_SAVE_REQ *)p_message)->audio_volume_ffs_fd);
    #else
      #if ((AUDIO_REGR == SW_COMPILED) || (AUDIO_MISC == SW_COMPILED))
        p_audio_test->speaker_volume_2.audio_speaker_level = audio_volume.audio_speaker_level;
      #endif
    #endif

    /* send the status message */
    audio_mode_save_send_status (AUDIO_OK, ((T_AUDIO_MODE_SAVE_REQ *)p_message)->return_path);
  }
#endif /* RVM_AUDIO_MAIN_SWE */