view src/g23m-aci/dti/dti_int_def.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 53929b40109c
children
line wrap: on
line source

/*
+-----------------------------------------------------------------------------
|  Project :  DTILIB
|  Modul   :  DTI
+-----------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG
|                 All rights reserved.
|
|                 This file is confidential and a trade secret of Texas
|                 Instruments Berlin, AG
|                 The receipt of or possession of this file does not convey
|                 any rights to reproduce or disclose its contents or to
|                 manufacture, use, or sell anything it may describe, in
|                 whole, or in part, without the specific written consent of
|                 Texas Instruments Berlin, AG.
+-----------------------------------------------------------------------------
|  Purpose :  Definitions for the internal Data Transmission Interface
|             Library, DTI.
+-----------------------------------------------------------------------------
*/
/*
 *  Version 1.6
 */

#ifndef DTI_INT_DEF_H
#define DTI_INT_DEF_H

/*==== Constants ==================================================================*/

/* definition disappeared from vsi.h */
#ifdef MEMORY_SUPERVISION
#define FILE_AND_LINE ,__FILE__,__LINE__
#else  /* MEMORY_SUPERVISION */
#define FILE_AND_LINE
#endif /* else MEMORY_SUPERVISION */

/*
 *  Please do NOT use D_FREE_LINK_ID as your link_id.
 *  This constant indicates a free link in the link structure and in the dti_data_ind queue.
 */

#define  D_FREE_LINK_ID    65000    /* Indicate a free link ID */
#define  NO_DATA_PACKET    NULL     /* Indicate that is no data packet in the link
                                       structure */

/*
 * Default parameter
 */

#define  D_HANDLE            0
#define  D_CHANNEL          0
#define  D_LINK             ((U32)NULL)
#define  D_LINK_HANDLE      0
#define  D_QUEUE_SIZE       0
#define  D_DIRECTION        DTI_CHANNEL_TO_LOWER_LAYER
#define  D_VERSION          DTI_VERSION_10
#define  D_INSTANCE         0
#define  D_INTERFACE        0
#define  D_LINK_OPTIONS     DTI_QUEUE_UNUSED
#define  D_CONNECT_STATE    DTI_CLOSED
#define  D_MAX_LINKS        0
#define  D_ATP_SW_ENTITY_ID 0       /* target ID within Riviera */

/*
 *  RX states
 */

#define DTI_RX_IDLE     0        /* No Flow Control primitive sent (initial state) */
#define DTI_RX_READY    1        /* Flow Control primitive sent expect data primitive */
#define DTI_RX_STOPPED  2        /* Flow Control primitive sent
                                    but data flow was stopped by the entity */
/*
 *  TX states
 */

#define DTI_TX_IDLE        1 /* Waiting for Flow Control primitive (initial state) */
#define DTI_TX_FLOW        2 /* Flow Control primitive received */
#define DTI_TX_BUFFER_FULL 3 /* TX buffer buffer full signal has been sent */

/*
 *  Connect states
 */
#if 0
/* already defined in dti.h */
#define DTI_CLOSED      0   /* DTI connection is not established */
#define DTI_SETUP       1   /* Waiting for Connect Confirm primitive */
#define DTI_IDLE        2   /* DTI connection is opened */
#endif /* 0 */
#define DTI_CONNECTING  3   /* Connect primitive received,
                               but no appropriate dti_open() was called */
#define DTI_CLOSING     4   /* DTI connection is to be closed
                               when the send queue is empty */

/*
 * Bitoffset for encoding/decoding
 */
#define ENCODE_OFFSET   0

/*============ TYPES ======================================================*/

/*
 * Return values
 */
typedef enum {
  DTI_E_FAIL = 0,
  DTI_S_OK = 1,
  DTI_S_FOUND,
  DTI_S_CREATED_NEW
} DTI_RESULT;

/*============ MACROS =====================================================*/

/*
+------------------------------------------------------------------------------
| Purpose:    Additions to general definitions in vsi.h
|             for execution without traces (no matter which flags are set).
|
|             This is needed for MTST - please be aware of possible code
|             changes in vsi.h, however...
| $Identity:$
+------------------------------------------------------------------------------
*/

#define  PSEND_NTRACE(E,D)     vsi_c_psend_ntrace ( VSI_CALLER E, \
                                 (T_VOID_STRUCT*)D, PSIZE(D) FILE_LINE_MACRO );



#define PPASS_NTRACE(D0,D,T)   T_##T  *D    = (T_##T*)D0; \
                                 D_OPC(D)     = (T);

/*============ DATA STRUCTURES ============================================*/

#ifdef FF_TCP_IP
/*
 * Link reference table, references links in ANY entity data base
 *  towards ATP
 */
#ifdef DTI_ATP_C
  DTI_LINK* atp_links[MAX_ATP_LINKS];
#else  /* DTI_ATP_C */
  extern DTI_LINK* atp_links[] ;
#endif /* DTI_ATP_C */

#endif /* FF_TCP_IP */




#endif /* DTI_INT_DEF_H */