view src/g23m-aci/gdd_dio/gdd_dio_data.h @ 638:cab2f315827e

FFS dev.c: added Spansion PL032J to the "generic" table With the discovery of first GTM900 and then Tango, it now appears that Openmoko was not the only manuf after all who kept TI's TCS211 firmware largely intact (as opposed to changing it beyond all recognition like Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets on which we reuse the original manuf's FFS with IMEI and RF calibration tables as if it were native. On these targets we use the original device table for FFS, even though we previously thought that it would never apply to any target other than dsample, leonardo and gtamodem. We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device) to the generic table to support its use in Huawei GTM900-B modules; now we got news that some slightly older GTM900-B specimen used S71PL032J instead, so we are now adding PL032J as well.
author Mychaela Falconia <falcon@freecalypso.org>
date Thu, 30 Jan 2020 17:45:48 +0000
parents 53929b40109c
children
line wrap: on
line source

/* 
+------------------------------------------------------------------------------
|  File:       gdd_dio_data.h
+------------------------------------------------------------------------------
|  Copyright 2002 Texas Instruments Berlin, AG 
|                 All rights reserved. 
| 
|                 This file is confidential and a trade secret of Texas 
|                 Instruments Berlin, AG 
|                 The receipt of or possession of this file does not convey 
|                 any rights to reproduce or disclose its contents or to 
|                 manufacture, use, or sell anything it may describe, in 
|                 whole, or in part, without the specific written consent of 
|                 Texas Instruments Berlin, AG. 
+----------------------------------------------------------------------------- 
|  Purpose :  Internal data structures for entity gdd_dio (DIO BAT Adapter)
+----------------------------------------------------------------------------- 
*/ 

#ifndef GDD_DIO_DATA_H
#define GDD_DIO_DATA_H

/*==== INCLUDES =============================================================*/

/* DIO stuff */
#include "dio.h"  /* for T_DIO_CAP_PKT */

/* We must define P_DIO_H, in order to avoid inclusion of p_dio.h.
   This is necessary due to the special fact, that "dio.h", which is included
   in the header "dio_io/dio_drv.h", mirrors the header "p_dio.h". */
#define P_DIO_H

#include "gdd.h"

#include "gdd_dio_queue.h"  /* for T_GDD_BUF_QUEUE */


/*==== DEFINITIONS ==========================================================*/

#define GDD_CON_HANDLE_USER_MASK 0xFF000000


/*==== CONSTS ===============================================================*/

/*==== TYPES =================================================================*/

/**
 * States of kernel service
 */
typedef enum 
{
	GDD_DIO_KER_DEAD = 0,
  GDD_DIO_KER_INIT,
  GDD_DIO_KER_READY
} T_GDD_DIO_KER_STATE;


/**
 * Kernel service data
 */
typedef struct
{
  T_GDD_DIO_KER_STATE         state;
} T_GDD_DIO_KER_DATA;


/**
 * States of a single connection
 */
typedef enum
{
  GDD_DIO_CON_DEAD = 1,
  GDD_DIO_CON_CONNECT,
  GDD_DIO_CON_READY,
  GDD_DIO_CON_SENDING,
  GDD_DIO_CON_CLOSE
} T_GDD_DIO_CON_STATE;

/**
 * Connection data
 */
typedef struct 
{
  T_GDD_BUF_QUEUE			   rx_queue;       /* RX buffer queue */
  T_GDD_BUF_QUEUE				 tx_queue;       /* TX buffer queue */
  UBYTE                  con_state;      /* Connection state */
  UBYTE                  wait_send_buf;  /* Flag indicating that we wait for
                                            a send buffer */
  U32                    dio_device;     /* Dio device type */
  T_GDD_RECEIVE_DATA_CB  rcv_cb;         /* Receive callback of the client */
  T_GDD_SIGNAL_CB        sig_cb;         /* Signale callback of the client */
  T_DIO_CAP_PKT          dio_cap;        /* DIO capabilities */
} T_GDD_DIO_CON_DATA;

/**
 * DIO driver number
 */
typedef U32 T_GDD_DIO_DRV_NUM;


/*==== EXPORTS ===============================================================*/

int inst_num_from_dev_id(U32 device);


#endif /* !GDD_DIO_DATA_H */