FreeCalypso > hg > fc-magnetite
view src/g23m-aci/uart/uart_kers.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 53929b40109c |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity UART and implements all | functions to handles the incoming process internal signals as | described in the SDL-documentation (KER-statemachine) +----------------------------------------------------------------------------- */ #ifndef UART_KERS_C #define UART_KERS_C #endif /* !UART_KERS_C */ #define ENTITY_UART /* * Turn off spurious LINT warnings */ /*lint -e415 access of out-of-bounds pointer */ /*==== INCLUDES =============================================================*/ #ifdef WIN32 #include "nucleus.h" #endif /* WIN32 */ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" #include "gsm.h" /* to get a lot of macros */ #include "cnf_uart.h" /* to get cnf-definitions */ #include "mon_uart.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" /* to get dti lib */ #include "pei.h" /* to get PEI interface */ #ifdef FF_MULTI_PORT #include "gsi.h" /* to get definitions of serial driver */ #else /* FF_MULTI_PORT */ #ifdef _TARGET_ #include "uart/serialswitch.h" #include "uart/traceswitch.h" #else /* _TARGET_ */ #include "serial_dat.h" /* to get definitions of serial driver */ #endif /* _TARGET_ */ #endif /* FF_MULTI_PORT */ #include "uart.h" /* to get the global entity definitions */ #ifdef FF_MULTI_PORT #include "uart_ptxs.h" /* to get signal definitions for service TX */ #include "uart_prxs.h" /* to get rx signals */ #else /* FF_MULTI_PORT */ #include "uart_txs.h" /* to get signal definitions of service TX */ #include "uart_rxs.h" /* to get signal definitions of service RX */ #endif /* FF_MULTI_PORT */ #include "uart_dtxs.h" /* to get signal definitions of service DTX */ #include "uart_drxs.h" /* to get signal definitions of service DRX */ #include "uart_kerf.h" /* to get function definitions of service KER */ #include "uart_rts.h" /* to get signal definitions of service RT */ #ifndef _TARGET_ #include <stdio.h> /* to get sprintf */ #endif /* !_TARGET_ */ #include <string.h> /* JK, delete warnings: to get memcpy */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : sig_drx_ker_line_states_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_DRX_KER_LINE_STATES_IND | | Parameters : dlc_instance - dlc instance wich belongs to calling DRX | st_flow - flow control state (X bit) | st_line_sa - line state SA | st_line_sa - line state SB | st_break_len - break state | +------------------------------------------------------------------------------ */ GLOBAL void sig_drx_ker_line_states_ind(UBYTE dlc_instance, UBYTE st_flow, UBYTE st_line_sa, UBYTE st_line_sb, USHORT st_break_len) { T_DLC* dlc; ULONG old_lines; ULONG new_lines; TRACE_ISIG( "sig_drx_ker_line_states_ind" ); /* * set DLC */ dlc = &uart_data->dlc_table[dlc_instance]; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * check for changed line states */ old_lines = dlc->lines & (UART_SA_TX_MASK | UART_SB_TX_MASK | UART_X_TX_MASK | UART_BRK_TX_MASK); new_lines = ((ULONG)st_line_sa << UART_SA_TX_POS) | ((ULONG)st_line_sb << UART_SB_TX_POS) | ((ULONG)st_flow << UART_X_TX_POS); if(st_break_len NEQ DTI_BREAK_OFF) { TRACE_EVENT("send Break"); new_lines|= UART_BRK_TX_MASK; } if(old_lines NEQ new_lines) { /* * trace changes */ if(new_lines & UART_X_TX_MASK) { if(!(old_lines & UART_X_TX_MASK)) { TRACE_EVENT("TX Flow Control: stop"); } } else if(old_lines & UART_X_TX_MASK) { TRACE_EVENT("TX Flow Control: start"); } if(new_lines & UART_SA_TX_MASK) { if(!(old_lines & UART_SA_TX_MASK)) { TRACE_EVENT("DSR: off"); } } else if(old_lines & UART_SA_TX_MASK) { TRACE_EVENT("DSR: on"); } if(new_lines & UART_SB_TX_MASK) { if(!(old_lines & UART_SB_TX_MASK)) { TRACE_EVENT("DCD: off"); } } else if(old_lines & UART_SB_TX_MASK) { TRACE_EVENT("DCD: on"); } /* * send new line states * but flush UART before */ dlc->lines&= ~(UART_SA_TX_MASK | UART_SB_TX_MASK | UART_X_TX_MASK | UART_BRK_TX_MASK | UART_BRKLEN_TX_MASK); if(st_break_len NEQ DTI_BREAK_OFF) new_lines|= ((ULONG)st_break_len << UART_BRKLEN_TX_POS); dlc->lines|= new_lines; dlc->received_prim|= UART_DTI_DATA_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } break; case KER_MUX: /* * check for changed line states */ old_lines = dlc->lines & (UART_CTS_MASK | UART_DSR_MASK | UART_DCD_MASK | UART_BRK_TX_MASK); new_lines = ((ULONG)st_flow << UART_CTS_POS) | ((ULONG)st_line_sa << UART_DSR_POS) | ((ULONG)st_line_sb << UART_DCD_POS); if(st_break_len NEQ DTI_BREAK_OFF) { TRACE_EVENT_P1("send Break - DLCI=%d", dlc->dlci); new_lines|= UART_BRK_TX_MASK; } if(old_lines NEQ new_lines) { /* * trace changes */ if(new_lines & UART_CTS_MASK) { if(!(old_lines & UART_CTS_MASK)) { TRACE_EVENT_P1("TX Flow Control: stop - DLCI=%d", dlc->dlci); } } else if(old_lines & UART_CTS_MASK) { TRACE_EVENT_P1("TX Flow Control: start - DLCI=%d", dlc->dlci); } if(new_lines & UART_DSR_MASK) { if(!(old_lines & UART_DSR_MASK)) { TRACE_EVENT_P1("DSR: off - DLCI=%d", dlc->dlci); } } else if(old_lines & UART_DSR_MASK) { TRACE_EVENT_P1("DSR: on - DLCI=%d", dlc->dlci); } if(new_lines & UART_DCD_MASK) { if(!(old_lines & UART_DCD_MASK)) { TRACE_EVENT_P1("DCD: off - DLCI=%d", dlc->dlci); } } else if(old_lines & UART_DCD_MASK) { TRACE_EVENT_P1("DCD: on - DLCI=%d", dlc->dlci); } /* * build and send MSC command */ dlc->lines&= ~(UART_CTS_MASK | UART_DSR_MASK | UART_DCD_MASK | UART_BRK_TX_MASK | UART_BRKLEN_TX_MASK); if(st_break_len NEQ DTI_BREAK_OFF) new_lines|= ((ULONG)st_break_len << UART_BRKLEN_TX_POS); dlc->lines|= new_lines; ker_mux_send_line_states(dlc_instance); } break; default: TRACE_ERROR( "SIG_DRX_KER_LINE_STATES_IND unexpected" ); break; } } /* sig_drx_ker_line_states_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_dtx_ker_enable_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_DTX_KER_ENABLE_IND | | Parameters : dlc_instance - dlc instance wich belongs to calling DTX | +------------------------------------------------------------------------------ */ GLOBAL void sig_dtx_ker_enable_ind (UBYTE dlc_instance) { TRACE_ISIG( "sig_dtx_ker_enable_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: /* * build and send MSC command * enable flow control in line states */ uart_data->dlc_table[dlc_instance].lines&= ~UART_FC_TX_MASK; /* * send new line states */ ker_mux_send_line_states(dlc_instance); break; case KER_READY: break; default: TRACE_ERROR( "SIG_DTX_KER_ENABLE_IND unexpected" ); break; } } /* sig_dtx_ker_enable_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_dtx_ker_disable_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_DTX_KER_DISABLE_IND | | Parameters : dlc_instance - dlc instance wich belongs to calling DTX | +------------------------------------------------------------------------------ */ GLOBAL void sig_dtx_ker_disable_ind (UBYTE dlc_instance) { TRACE_ISIG( "sig_dtx_ker_disable_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: /* * build and send MSC command * disable flow control in line states */ uart_data->dlc_table[dlc_instance].lines|= UART_FC_TX_MASK; /* * send new line states */ ker_mux_send_line_states(dlc_instance); break; case KER_READY: break; default: TRACE_ERROR( "SIG_DTX_KER_DISABLE_IND unexpected" ); break; } } /* sig_dtx_ker_disable_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_dtx_ker_escape_detected_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_DTX_KER_ESCAPE_DETECTED_IND | | Parameters : dlc_instance - dlc instance wich belongs to calling DTX | +------------------------------------------------------------------------------ */ GLOBAL void sig_dtx_ker_escape_detected_ind (U8 dlc_instance) { T_DLC *dlc; TRACE_FUNCTION( "sig_dtx_ker_escape_detected_ind" ); /* * set DLC */ dlc = &uart_data->dlc_table[dlc_instance]; { PALLOC (uart_detected_ind, UART_DETECTED_IND); uart_detected_ind->device = uart_data->device; uart_detected_ind->dlci = dlc->dlci; uart_detected_ind->cause = UART_DETECT_ESC; PSEND (hCommMMI, uart_detected_ind); } } /* sig_dtx_ker_escape_detected_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_any_ker_flushed_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_ANY_KER_FLUSHED_IND | | Parameters : dlc_instance - dlc instance wich belongs to this signal | +------------------------------------------------------------------------------ */ GLOBAL void sig_any_ker_flushed_ind (UBYTE dlc_instance) { T_DLC* dlc; UBYTE i; TRACE_ISIG( "sig_any_ker_flushed_ind" ); /* * reset flush indicator */ dlc = &uart_data->dlc_table[dlc_instance]; dlc->flushed = TRUE; /* * if the primitive which has triggered the flush belongs to the whole port * we will check each DLC for flush, if it only belongs to this DLC we start * TX flushing immediately */ if(uart_data->ker.received_prim) { /* * check each DLC */ for(i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if(dlc->flushed NEQ TRUE) return; } } /* * start TX flushing */ uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } /* sig_any_ker_flushed_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_tx_ker_flushed_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_TX_KER_FLUSHED_IND | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_tx_ker_flushed_ind () { T_DLC* dlc; UBYTE i; #ifndef _SIMULATION_ USHORT error_code; #endif TRACE_ISIG( "sig_tx_ker_flushed_ind" ); if(uart_data->ker.flush_state EQ UART_KER_TX_FLUSH) { /* * primitives of the port */ /* * UART_PARAMETERS_REQ */ if(uart_data->ker.received_prim & UART_PARAMETERS_REQ_MASK) { /* * disable UART while set new communication parameters */ #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); dti_getdata_req->link_id = LINK_DISABLE_PORT_1; /* for disable */ PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ #ifndef FF_MULTI_PORT if((error_code = UF_Enable (uart_data->device, FALSE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't disable UART, [%d], uart_kerp.c(%d)", error_code,__LINE__); } #endif /* !FF_MULTI_PORT */ #endif /* _SIMULATION */ /* * set new parameters */ ker_setupUart(); #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); dti_getdata_req->link_id = LINK_ENABLE_PORT_1; /* for enable */ PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ #ifndef FF_MULTI_PORT if((error_code = UF_Enable (uart_data->device, TRUE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't enable UART, [%d], uart_kerp.c(%d)", error_code,__LINE__); } #endif /* !FF_MULTI_PORT */ #endif /* _SIMULATION */ /* * restart suspended read and write procedures */ sig_ker_tx_restart_write_req(); sig_ker_rx_restart_read_req(); /* * send confirm primitive */ { PALLOC (uart_parameters_cnf, UART_PARAMETERS_CNF); uart_parameters_cnf->device = uart_data->device; PSEND (hCommMMI, uart_parameters_cnf); } } /* * UART_DISABLE_REQ */ if(uart_data->ker.received_prim & UART_DISABLE_REQ_MASK) { switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: case KER_MUX_ESTABLISH: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); break; case KER_READY: /* * close dlc channel */ ker_mux_dlc_release(UART_CONTROL_INSTANCE); break; case KER_DEAD: break; default: TRACE_ERROR( "SIG_TX_KER_FLUSHED_IND unexpected" ); break; } SET_STATE( UART_SERVICE_KER, KER_DEAD ); /* * disable UART */ #ifdef _SIMULATION_ { /* * send DTI_GETDATA_REQ */ PALLOC (dti_getdata_req, DTI2_GETDATA_REQ); dti_getdata_req->link_id = LINK_DISABLE_PORT_1; /* for disable */ PSEND (hCommMMI, dti_getdata_req); } #else /* _SIMULATION_ */ #ifndef FF_MULTI_PORT if((error_code = UF_Enable (uart_data->device, FALSE)) NEQ UF_OK) { TRACE_ERROR_P2("UF Driver: Can't disable UART, [%d], uart_kerp.c(%d)", error_code,__LINE__); } #endif /* !FF_MULTI_PORT */ #endif /* _SIMULATION */ sig_ker_rx_dead_mode_req(); sig_ker_tx_dead_mode_req(); /* * send confirm primitive */ { PALLOC (uart_disable_cnf, UART_DISABLE_CNF); uart_disable_cnf->device = uart_data->device; PSEND (hCommMMI, uart_disable_cnf); } } /* * UART_MUX_START_REQ */ if(uart_data->ker.received_prim & UART_MUX_START_REQ_MASK) { switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * close dlc channel */ ker_mux_dlc_release(UART_CONTROL_INSTANCE); break; default: TRACE_ERROR( "SIG_TX_KER_FLUSHED_IND unexpected" ); break; } SET_STATE( UART_SERVICE_KER, KER_MUX_ESTABLISH ); /* * set RX and TX service in mux mode */ sig_ker_rx_mux_mode_req(); sig_ker_tx_mux_mode_req(); /* * start reception */ MALLOC(uart_data->ker.rx_data_desc, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); uart_data->ker.rx_data_desc->next = (ULONG)NULL; uart_data->ker.rx_data_desc->len = 0; sig_ker_rx_ready_to_receive_req(uart_data->ker.rx_data_desc, 0, (USHORT)(uart_data->n1 + 2)); /* * start timer */ sig_ker_rt_start_t3_req(); /* * send confirm primitive */ { PALLOC (uart_mux_start_cnf, UART_MUX_START_CNF); uart_mux_start_cnf->device = uart_data->device; PSEND (hCommMMI, uart_mux_start_cnf); } } /* * UART_MUX_CLOSE_REQ */ if(uart_data->ker.received_prim & UART_MUX_CLOSE_REQ_MASK) { switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_CLOSED: if(uart_data->ker.receiving_state NEQ UART_KER_RECEIVING) { PALLOC(uart_mux_close_ind, UART_MUX_CLOSE_IND); SET_STATE( UART_SERVICE_KER, KER_READY ); /* * stop receiving */ sig_ker_rx_not_ready_to_receive_req(); MFREE_DESC2(uart_data->ker.rx_data_desc); uart_data->ker.rx_data_desc = NULL; /* * set dlc values */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->drx = &uart_data->drx_base[0]; dlc->dtx = &uart_data->dtx_base[0]; dlc->dlci = 0; dlc->priority = 0; /* * set RX and TX in ready mode */ sig_ker_rx_ready_mode_req(); sig_ker_tx_ready_mode_req(); /* * set frame size for ready mode */ uart_data->n1 = UART_N1_READY_MODE; /* * set DRX and DTX in ready mode */ uart_data->dtx = dlc->dtx; uart_data->drx = dlc->drx; sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE); /* * inform ACI about entering ready mode */ uart_mux_close_ind->device = uart_data->device; PSEND(hCommMMI, uart_mux_close_ind); } break; default: TRACE_ERROR( "SIG_TX_KER_FLUSHED_IND unexpected" ); break; } } /* * no more UART port related primitives * so clear all flags */ uart_data->ker.received_prim = 0; /* * primitives of the DLC */ for(i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; if(dlc->received_prim) { /* * UART_RING_REQ * UART_DCD_REQ * DTI_DATA_REQ (line states) */ if((dlc->received_prim & UART_RING_REQ_MASK) || (dlc->received_prim & UART_DCD_REQ_MASK) || (dlc->received_prim & UART_DTI_DATA_REQ_MASK)) { /* * send new line states */ switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: sig_ker_tx_line_states_req(UART_CONTROL_INSTANCE); break; case KER_MUX: /* * send MSC frame to peer */ ker_mux_send_line_states (uart_data->dlc_instance[dlc->dlci]); break; default: if(dlc->received_prim & UART_RING_REQ_MASK) { TRACE_ERROR( "UART_RING_REQ unexpected" ); } if(dlc->received_prim & UART_DCD_REQ_MASK) { TRACE_ERROR( "UART_DCD_REQ unexpected" ); } break; } /* * send confirm primitives */ if(dlc->received_prim & UART_RING_REQ_MASK) { PALLOC (uart_ring_cnf, UART_RING_CNF); uart_ring_cnf->device = uart_data->device; uart_ring_cnf->dlci = dlc->dlci; PSEND (hCommMMI, uart_ring_cnf); } if(dlc->received_prim & UART_DCD_REQ_MASK) { PALLOC (uart_dcd_cnf, UART_DCD_CNF); uart_dcd_cnf->device = uart_data->device; uart_dcd_cnf->dlci = dlc->dlci; PSEND (hCommMMI, uart_dcd_cnf); } } /* * no more DLC related primitives * so clear all flags */ dlc->received_prim = 0; } } uart_data->ker.flush_state = UART_KER_NOT_FLUSHING; } } /* sig_tx_ker_flushed_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_tx_ker_sending_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_TX_KER_SENDING_IND | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_tx_ker_sending_ind () { TRACE_ISIG( "sig_tx_ker_sending_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: case KER_MUX: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: uart_data->ker.sending_state = UART_KER_SENDING; break; default: TRACE_ERROR( "SIG_TX_KER_SENDING_IND unexpected" ); break; } } /* sig_tx_ker_sending_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_tx_ker_data_sent_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_TX_KER_DATA_SENT_IND | | Parameters : rest_data - not yet sent data | write_pos - position where the not yet sent data starts | +------------------------------------------------------------------------------ */ GLOBAL void sig_tx_ker_data_sent_ind (T_desc2* rest_data, USHORT read_pos) { TRACE_ISIG( "sig_tx_ker_data_sent_ind" ); /* * free sent data descriptor */ MFREE_DESC2(uart_data->ker.tx_data_desc); uart_data->ker.tx_data_desc = NULL; uart_data->ker.sending_state = UART_KER_NOT_SENDING; if(uart_data->ker.tx_data_waiting) { /* * send next descriptor in waiting queue */ uart_data->ker.tx_data_desc = uart_data->ker.tx_data_waiting; uart_data->ker.tx_data_waiting = (T_desc2*)uart_data->ker.tx_data_waiting->next; /* * only one descriptor is sent at a time */ uart_data->ker.tx_data_desc->next = (ULONG)NULL; sig_ker_tx_data_available_req( uart_data->ker.tx_data_desc, 0); } else { switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: case KER_MUX: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: break; case KER_MUX_CLOSED: /* * flush UART before enter ready mode */ uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } break; default: TRACE_ERROR( "SIG_TX_KER_DATA_SENT_IND unexpected" ); break; } } } /* sig_tx_ker_data_sent_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rx_ker_receiving_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RX_KER_RECEIVING_IND | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_rx_ker_receiving_ind () { TRACE_ISIG( "sig_rx_ker_receiving_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: case KER_MUX: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: uart_data->ker.receiving_state = UART_KER_RECEIVING; break; default: TRACE_ERROR( "SIG_RX_KER_RECEIVING_IND unexpected" ); break; } } /* sig_rx_ker_receiving_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rx_ker_data_received_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RX_KER_DATA_RECEIVED_IND | which is used to process a received frame. | | Precondition is that the frame has a length >2 without flags. | | Parameters : received_data - received data | write_pos - write position for the next reception | +------------------------------------------------------------------------------ */ GLOBAL void sig_rx_ker_data_received_ind (T_desc2* received_data, USHORT write_pos) { UBYTE i; UBYTE dlci; T_DLC* dlc; ULONG forward; BOOL continuous; TRACE_ISIG( "sig_rx_ker_data_received_ind" ); #ifndef _TARGET_ if(received_data->len) { USHORT pos; char buf[90]; /* * trace output */ TRACE_EVENT("======= IN"); i = 0; pos = 0; while(pos < received_data->len) { i+= sprintf(&buf[i], "0x%02x, ", received_data->buffer[pos]); pos++; if(i > 80) { TRACE_EVENT( buf ); i = 0; } else if(pos >= received_data->len) { TRACE_EVENT( buf ); } } } #endif /* !_TARGET_ */ uart_data->ker.receiving_state = UART_KER_NOT_RECEIVING; switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: if(received_data->len EQ 0) { /* * prepare next reception */ sig_ker_rx_ready_to_receive_req(received_data, write_pos, (USHORT)(uart_data->n1 + 2)); break; } dlci = received_data->buffer[UART_OFFSET_ADDRESS] >> UART_DLCI_POS; if((dlci EQ UART_DLCI_CONTROL) && (received_data->buffer[UART_OFFSET_CONTROL] EQ UART_SABM_FRAME)) { /* * analyze SABM frame */ forward = 0; ker_receive_sabm_frame(&forward, received_data); /* * set dlc value */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; if((forward & UART_FORWARD_SABM) && (dlc->connection_state EQ UART_CONNECTION_SABM_RCVD) && (uart_data->dlc_instance[dlci] NEQ UART_CONTROL_INSTANCE)) { SET_STATE( UART_SERVICE_KER, KER_MUX ); /* * stop timer */ sig_ker_rt_stop_t3_req(); /* * setup dlc parameter */ uart_data->dlc_instance[dlci] = UART_CONTROL_INSTANCE; dlc->connection_state = UART_CONNECTION_OPEN; /* * set priority */ dlc->priority = 0; /* * send response frame */ if(forward & UART_FORWARD_RESPONSE) { ker_mux_send_frame(received_data); /* * prepare next reception */ MALLOC(received_data, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); received_data->next = (ULONG)NULL; } } } /* * prepare next reception */ received_data->len = 0; uart_data->ker.rx_data_desc = received_data; sig_ker_rx_ready_to_receive_req(received_data, 0, (USHORT)(uart_data->n1 + 2)); break; case KER_MUX: if(received_data->len EQ 0) { /* * prepare next reception */ sig_ker_rx_ready_to_receive_req(received_data, write_pos, (USHORT)(uart_data->n1 + 2)); break; } /* * analyze frame and messages */ forward = 0; switch(received_data->buffer[UART_OFFSET_CONTROL]) { case UART_SABM_FRAME: ker_receive_sabm_frame(&forward, received_data); break; case UART_UA_FRAME: ker_receive_ua_frame(&forward, received_data); break; case UART_DM_CONTROL_FRAME: case UART_DM_DATA_FRAME: ker_receive_dm_frame(&forward, received_data); break; case UART_DISC_FRAME: ker_receive_disc_frame(&forward, received_data); break; case UART_UIH_CONTROL_FRAME: ker_receive_uih_control_frame(&forward, received_data); break; case UART_UIH_DATA_FRAME: ker_receive_uih_data_frame(&forward, received_data); break; default: { TRACE_EVENT_P2("Warning: Unexpected HDLC value: %d, uart_kers.c(%d)", received_data->buffer[UART_OFFSET_CONTROL], __LINE__); break; } } /* * remove resonded frames and send next frames in command queue */ for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; switch(dlc->connection_state) { case UART_CONNECTION_OPEN: case UART_CONNECTION_DISC_SENT: if((dlc->last_command NEQ NULL) && (dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) && (dlc->last_command->len EQ UART_OFFSET_INFO)) { /* * remove responded UIH frame */ MFREE_DESC2(dlc->last_command); dlc->last_command = NULL; uart_data->ker.nr_t2--; if( uart_data->ker.nr_t2 EQ 0 ) sig_ker_rt_stop_t2_req(); } if((dlc->last_command EQ NULL) && (dlc->next_command NEQ NULL)) { T_desc2* temp_desc; /* * transmit next command frame */ dlc->last_command = dlc->next_command; dlc->next_command = (T_desc2*)dlc->next_command->next; dlc->last_command->next = (ULONG)NULL; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); dlc->retransmissions = 0; ker_mux_send_frame(temp_desc); if(dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) { uart_data->ker.nr_t2++; sig_ker_rt_start_t2_req(); } else { uart_data->ker.nr_t1++; sig_ker_rt_start_t1_req(); } } break; case UART_CONNECTION_DEAD: break; default: { TRACE_EVENT_P2("Unexpected DLC connection state: %d, uart_kers.c(%d)", dlc->connection_state, __LINE__); break; } } } /* * process results of analysis */ if(forward) { for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { if(i NEQ UART_CONTROL_INSTANCE) { /* * set dlc values */ dlc = &uart_data->dlc_table[i]; dlci = dlc->dlci; /* * channel to open */ if((forward & UART_FORWARD_SABM) && (dlc->connection_state EQ UART_CONNECTION_SABM_RCVD) && (uart_data->dlc_instance[dlci] NEQ i)) { PALLOC(uart_mux_dlc_establish_ind, UART_MUX_DLC_ESTABLISH_IND); /* * setup dlc parameter */ uart_data->dlc_instance[dlci] = i; dlc->drx = &uart_data->drx_base[i]; dlc->dtx = &uart_data->dtx_base[i]; /* * set priority */ if(dlci < 8) dlc->priority = 7; else if(dlci < 16) dlc->priority = 15; else if(dlci < 24) dlc->priority = 23; else if(dlci < 32) dlc->priority = 31; else if(dlci < 40) dlc->priority = 39; else if(dlci < 48) dlc->priority = 47; else if(dlci < 56) dlc->priority = 55; else dlc->priority = 61; /* * store response frame and * clear appropriate bit in forward mask */ dlc->next_command = received_data; forward &= ~UART_FORWARD_RESPONSE; /* * create new reception frame */ MALLOC(received_data, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); received_data->next = (ULONG)NULL; /* * inform ACI about new DLC */ uart_mux_dlc_establish_ind->device = uart_data->device; uart_mux_dlc_establish_ind->dlci = dlci; uart_mux_dlc_establish_ind-> convergence = UART_MUX_CONVERGENCE_UOS; uart_mux_dlc_establish_ind->n1 = uart_data->n1; uart_mux_dlc_establish_ind-> service = UART_MUX_SERVICE_AT; PSEND (hCommMMI, uart_mux_dlc_establish_ind); } /* * channel to close */ if((forward & UART_FORWARD_DLC_RELEASE) && (dlc->connection_state EQ UART_CONNECTION_DEAD) && (dlci NEQ UART_DLCI_INVALID)) { PALLOC(uart_mux_dlc_release_ind, UART_MUX_DLC_RELEASE_IND); /* * release channel */ ker_mux_dlc_release(i); /* * inform ACI about DLC release */ uart_mux_dlc_release_ind->device = uart_data->device; uart_mux_dlc_release_ind->dlci = dlci; PSEND(hCommMMI, uart_mux_dlc_release_ind); } /* * set Flow Control ON */ if((forward & UART_FORWARD_FCON) && (dlc->connection_state EQ UART_CONNECTION_OPEN) && (!(dlc->lines & UART_FC_RX_MASK))) { uart_data->drx = dlc->drx; sig_ker_drx_enable_req(); } /* * set Flow Control OFF */ if((forward & UART_FORWARD_FCOFF) && (dlc->connection_state EQ UART_CONNECTION_OPEN) && (!(dlc->lines & UART_FC_RX_MASK))) { uart_data->drx = dlc->drx; sig_ker_drx_disable_req(); } /* * send status lines */ if((forward & UART_FORWARD_MSC) && (dlc->connection_state EQ UART_CONNECTION_OPEN)) { UBYTE st_flow; UBYTE st_line_sa; UBYTE st_break_len; /* * send primitive if DTR drop is detected */ if(dlc->lines & UART_DTR_MASK) { PALLOC (uart_detected_ind, UART_DETECTED_IND); uart_detected_ind->device = uart_data->device; uart_detected_ind->dlci = dlc->dlci; uart_detected_ind->cause = UART_DETECT_DTR; PSEND (hCommMMI, uart_detected_ind); } /* * set line states */ if(dlc->lines & UART_RTS_MASK) st_flow = DTI_FLOW_OFF; else st_flow = DTI_FLOW_ON; if(dlc->lines & UART_DTR_MASK) st_line_sa = DTI_SA_OFF; else st_line_sa = DTI_SA_ON; /* * set break */ if(dlc->lines & UART_BRK_RX_MASK) st_break_len = (UBYTE)((dlc->lines & UART_BRKLEN_RX_MASK) >> UART_BRKLEN_RX_POS); else st_break_len = DTI_BREAK_OFF; /* * send flow control signals */ if(uart_data->ker.data_flow_tx EQ UART_FLOW_ENABLED) { uart_data->drx = dlc->drx; if(dlc->lines & UART_FC_RX_MASK) sig_ker_drx_disable_req(); else sig_ker_drx_enable_req(); } /* * send line states */ uart_data->dtx = dlc->dtx; sig_ker_dtx_line_states_req(st_flow, st_line_sa, DTI_SB_ON, st_break_len); } } } /* * send response frame */ if(forward & UART_FORWARD_RESPONSE) { ker_mux_send_frame(received_data); uart_data->ker.rx_data_desc = NULL; } /* * Close-Down multiplexer */ if(forward & UART_FORWARD_CLD) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED ); /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); /* * flush UART before change the state */ if(uart_data->ker.tx_data_desc EQ NULL) { uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } } } /* * prepare next reception */ if(forward & UART_FORWARD_RESPONSE) { MALLOC(received_data, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); received_data->next = (ULONG)NULL; } received_data->len = 0; uart_data->ker.rx_data_desc = received_data; sig_ker_rx_ready_to_receive_req(received_data, 0, (USHORT)(uart_data->n1 + 2)); break; case KER_MUX_DLC_CLOSING: if(received_data->len EQ 0) { /* * prepare next reception */ sig_ker_rx_ready_to_receive_req(received_data, write_pos, (USHORT)(uart_data->n1 + 2)); break; } /* * analyze frame and messages */ forward = 0; switch(received_data->buffer[UART_OFFSET_CONTROL]) { case UART_SABM_FRAME: ker_receive_sabm_frame(&forward, received_data); break; case UART_UA_FRAME: ker_receive_ua_frame(&forward, received_data); break; case UART_DM_CONTROL_FRAME: case UART_DM_DATA_FRAME: ker_receive_dm_frame(&forward, received_data); break; case UART_DISC_FRAME: ker_receive_disc_frame(&forward, received_data); break; case UART_UIH_CONTROL_FRAME: ker_receive_uih_control_frame(&forward, received_data); break; case UART_UIH_DATA_FRAME: ker_receive_uih_data_frame(&forward, received_data); break; default: { TRACE_EVENT_P2("Warning: Unexpected HDLC value: %d, uart_kers.c(%d)", received_data->buffer[UART_OFFSET_CONTROL], __LINE__); break; } } /* * remove resonded frames and send next frames in command queue */ for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; switch(dlc->connection_state) { case UART_CONNECTION_OPEN: case UART_CONNECTION_DISC_SENT: if((dlc->last_command NEQ NULL) && (dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) && (dlc->last_command->len EQ UART_OFFSET_INFO)) { /* * remove responded UIH frame */ MFREE_DESC2(dlc->last_command); dlc->last_command = NULL; uart_data->ker.nr_t2--; if( uart_data->ker.nr_t2 EQ 0 ) sig_ker_rt_stop_t2_req(); } if((dlc->last_command EQ NULL) && (dlc->next_command NEQ NULL)) { T_desc2* temp_desc; /* * transmit next command frame */ dlc->last_command = dlc->next_command; dlc->next_command = (T_desc2*)dlc->next_command->next; dlc->last_command->next = (ULONG)NULL; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); dlc->retransmissions = 0; ker_mux_send_frame(temp_desc); if(dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) { uart_data->ker.nr_t2++; sig_ker_rt_start_t2_req(); } else { uart_data->ker.nr_t1++; sig_ker_rt_start_t1_req(); } } break; case UART_CONNECTION_DEAD: break; default: { TRACE_EVENT_P2("Unexpected DLC connection state: %d, uart_kers.c(%d)", dlc->connection_state, __LINE__); break; } } } /* * process results of analysis */ if(forward) { continuous = FALSE; for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { if(i NEQ UART_CONTROL_INSTANCE) { /* * set dlc values */ dlc = &uart_data->dlc_table[i]; dlci = dlc->dlci; /* * channel to open */ if((forward & UART_FORWARD_SABM) && (dlc->connection_state EQ UART_CONNECTION_SABM_RCVD)) { /* * reject all attempts to open a channel */ received_data->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME; /* * release channel */ ker_mux_dlc_release(i); } /* * channel to close */ if((forward & UART_FORWARD_DLC_RELEASE) && (dlc->connection_state EQ UART_CONNECTION_DEAD) && (dlci NEQ UART_DLCI_INVALID)) { /* * release channel */ ker_mux_dlc_release(i); } if(dlc->connection_state NEQ UART_CONNECTION_DEAD) continuous = TRUE; } } /* * send response frame */ if(forward & UART_FORWARD_RESPONSE) { ker_mux_send_frame(received_data); uart_data->ker.rx_data_desc = NULL; } /* * Close-Down multiplexer */ if(forward & UART_FORWARD_CLD) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED ); /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); /* * flush UART before change the state */ if(uart_data->ker.tx_data_desc EQ NULL) { uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } } /* * change state if all channels are closed */ else if(continuous EQ FALSE) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSING ); /* * build and send CLD command frame: */ ker_mux_send_close_down(); /* * start timer */ sig_ker_rt_start_t3_req(); } } /* * prepare next reception */ if(forward & UART_FORWARD_RESPONSE) { MALLOC(received_data, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); received_data->next = (ULONG)NULL; } received_data->len = 0; uart_data->ker.rx_data_desc = received_data; sig_ker_rx_ready_to_receive_req(received_data, 0, (USHORT)(uart_data->n1 + 2)); break; case KER_MUX_CLOSING: if(received_data->len EQ 0) { /* * prepare next reception */ sig_ker_rx_ready_to_receive_req(received_data, write_pos, (USHORT)(uart_data->n1 + 2)); break; } /* * analyze frame and messages */ forward = 0; switch(received_data->buffer[UART_OFFSET_CONTROL]) { case UART_SABM_FRAME: ker_receive_sabm_frame(&forward, received_data); break; case UART_UA_FRAME: ker_receive_ua_frame(&forward, received_data); break; case UART_DM_CONTROL_FRAME: case UART_DM_DATA_FRAME: ker_receive_dm_frame(&forward, received_data); break; case UART_DISC_FRAME: ker_receive_disc_frame(&forward, received_data); break; case UART_UIH_CONTROL_FRAME: ker_receive_uih_control_frame(&forward, received_data); break; case UART_UIH_DATA_FRAME: ker_receive_uih_data_frame(&forward, received_data); break; default: { TRACE_EVENT_P2("Warning: Unexpected HDLC value: %d, uart_kers.c(%d)", received_data->buffer[UART_OFFSET_CONTROL], __LINE__); break; } } /* * remove resonded frames and send next frames in command queue */ for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { dlc = &uart_data->dlc_table[i]; switch(dlc->connection_state) { case UART_CONNECTION_OPEN: case UART_CONNECTION_DISC_SENT: if((dlc->last_command NEQ NULL) && (dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) && (dlc->last_command->len EQ UART_OFFSET_INFO)) { /* * remove responded UIH frame */ MFREE_DESC2(dlc->last_command); dlc->last_command = NULL; uart_data->ker.nr_t2--; if( uart_data->ker.nr_t2 EQ 0 ) sig_ker_rt_stop_t2_req(); } if((dlc->last_command EQ NULL) && (dlc->next_command NEQ NULL)) { T_desc2* temp_desc; /* * transmit next command frame */ dlc->last_command = dlc->next_command; dlc->next_command = (T_desc2*)dlc->next_command->next; dlc->last_command->next = (ULONG)NULL; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); dlc->retransmissions = 0; ker_mux_send_frame(temp_desc); if(dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME) { uart_data->ker.nr_t2++; sig_ker_rt_start_t2_req(); } else { uart_data->ker.nr_t1++; sig_ker_rt_start_t1_req(); } } break; case UART_CONNECTION_DEAD: break; default: { TRACE_EVENT_P2("Unexpected DLC connection state: %d, uart_kers.c(%d)", dlc->connection_state,__LINE__); break; } } } /* * process results of analysis */ if(forward) { for(i=0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++) { if(i NEQ UART_CONTROL_INSTANCE) { /* * set dlc values */ dlc = &uart_data->dlc_table[i]; dlci = dlc->dlci; /* * channel to open */ if((forward & UART_FORWARD_SABM) && (dlc->connection_state EQ UART_CONNECTION_SABM_RCVD)) { /* * reject all attempts to open a channel */ received_data->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME; /* * release channel */ ker_mux_dlc_release(i); } /* * channel to close */ if((forward & UART_FORWARD_DLC_RELEASE) && (dlc->connection_state EQ UART_CONNECTION_DEAD) && (dlci NEQ UART_DLCI_INVALID)) { /* * release channel */ ker_mux_dlc_release(i); } } } /* * send response frame */ if(forward & UART_FORWARD_RESPONSE) { ker_mux_send_frame(received_data); uart_data->ker.rx_data_desc = NULL; } /* * Close-Down multiplexer */ if(forward & UART_FORWARD_CLD) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED ); /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); /* * flush UART before change the state */ if(uart_data->ker.tx_data_desc EQ NULL) { uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } } } /* * prepare next reception */ if(forward & UART_FORWARD_RESPONSE) { MALLOC(received_data, (USHORT)(sizeof(T_desc2) - 1 + uart_data->n1 + 2)); received_data->next = (ULONG)NULL; } received_data->len = 0; uart_data->ker.rx_data_desc = received_data; sig_ker_rx_ready_to_receive_req(received_data, 0, (USHORT)(uart_data->n1 + 2)); break; case KER_MUX_CLOSED: if((uart_data->ker.tx_data_desc EQ NULL) && (uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING)) { PALLOC(uart_mux_close_ind, UART_MUX_CLOSE_IND); SET_STATE( UART_SERVICE_KER, KER_READY ); /* * free receiving buffer */ MFREE_DESC2(uart_data->ker.rx_data_desc); uart_data->ker.rx_data_desc = NULL; /* * set dlc values */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; dlc->drx = &uart_data->drx_base[0]; dlc->dtx = &uart_data->dtx_base[0]; dlc->dlci = 0; dlc->priority = 0; /* * set RX and TX in ready mode */ sig_ker_rx_ready_mode_req(); sig_ker_tx_ready_mode_req(); /* * set frame size for ready mode */ uart_data->n1 = UART_N1_READY_MODE; /* * set DRX and DTX in ready mode */ uart_data->dtx = dlc->dtx; uart_data->drx = dlc->drx; sig_ker_drx_ready_mode_req(UART_CONTROL_INSTANCE); sig_ker_dtx_ready_mode_req(UART_CONTROL_INSTANCE); /* * inform ACI about entering ready mode */ uart_mux_close_ind->device = uart_data->device; PSEND(hCommMMI, uart_mux_close_ind); } else if(received_data->len EQ 0) { /* * prepare next reception */ sig_ker_rx_ready_to_receive_req(received_data, write_pos, (USHORT)(uart_data->n1 + 2)); } else { /* * prepare next reception */ received_data->len = 0; sig_ker_rx_ready_to_receive_req(received_data, 0, (USHORT)(uart_data->n1 + 2)); } break; default: TRACE_ERROR( "SIG_RX_KER_DATA_RECEIVED_IND unexpected" ); break; } } /* sig_rx_ker_data_received_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rx_ker_line_states_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RX_KER_LINE_STATES_IND | | Parameters : line_states - new line states | +------------------------------------------------------------------------------ */ GLOBAL void sig_rx_ker_line_states_ind (ULONG line_states) { T_DLC* dlc; UBYTE st_flow; UBYTE st_line_sa; UBYTE st_line_sb; UBYTE st_break_len; TRACE_ISIG( "sig_rx_ker_line_states_ind" ); /* * set DLC */ dlc = &uart_data->dlc_table[UART_CONTROL_INSTANCE]; /* * send primitive if escape sequence or DTR drop is detected */ if(line_states & UART_ESC_RX_MASK) { PALLOC (uart_detected_ind, UART_DETECTED_IND); uart_detected_ind->device = uart_data->device; uart_detected_ind->dlci = dlc->dlci; uart_detected_ind->cause = UART_DETECT_ESC; PSEND (hCommMMI, uart_detected_ind); } if((line_states & UART_DTR_MASK) AND (!(dlc->lines & UART_DTR_MASK))) { PALLOC (uart_detected_ind, UART_DETECTED_IND); uart_detected_ind->device = uart_data->device; uart_detected_ind->dlci = dlc->dlci; uart_detected_ind->cause = UART_DETECT_DTR; PSEND (hCommMMI, uart_detected_ind); } switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: /* * set line states */ if(line_states & UART_X_RX_MASK) st_flow = DTI_FLOW_OFF; else st_flow = DTI_FLOW_ON; if(line_states & UART_SA_RX_MASK) st_line_sa = DTI_SA_OFF; else st_line_sa = DTI_SA_ON; if(line_states & UART_SB_RX_MASK) st_line_sb = DTI_SB_OFF; else st_line_sb = DTI_SB_ON; if(line_states & UART_BRK_RX_MASK) st_break_len = (UBYTE)((line_states & UART_BRKLEN_RX_MASK) >> UART_BRKLEN_RX_POS); else st_break_len = DTI_BREAK_OFF; uart_data->dtx = dlc->dtx; sig_ker_dtx_line_states_req(st_flow, st_line_sa, st_line_sb, st_break_len); break; case KER_MUX_ESTABLISH: case KER_MUX: case KER_MUX_DLC_CLOSING: case KER_MUX_CLOSING: case KER_MUX_CLOSED: break; default: TRACE_ERROR( "SIG_RX_KER_LINE_STATES_IND unexpected" ); break; } /* * store new line states */ dlc->lines &= ~(UART_X_RX_MASK | UART_SA_RX_MASK | UART_SB_RX_MASK | UART_ESC_RX_MASK | UART_BRK_RX_MASK | UART_BRKLEN_RX_MASK); line_states&= ~(UART_ESC_RX_MASK | UART_BRK_RX_MASK | UART_BRKLEN_RX_MASK); dlc->lines |= line_states; } /* sig_rx_ker_line_states_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rt_ker_timeout_t1_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RT_KER_TIMEOUT_T1_IND | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_rt_ker_timeout_t1_ind () { UBYTE i; T_desc2* temp_desc; T_DLC* dlc; UBYTE j; UBYTE dlci; ULONG forward; BOOL continuous; TRACE_ISIG( "sig_rt_ker_timeout_t1_ind" ); for( i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++ ) { /* * set dlc value */ dlc = &uart_data->dlc_table[i]; switch(dlc->connection_state) { case UART_CONNECTION_OPEN: case UART_CONNECTION_DISC_SENT: /* * T1 is used for non UIH Control frames */ if((dlc->last_command NEQ NULL) && (dlc->last_command->buffer[UART_OFFSET_CONTROL] NEQ UART_UIH_CONTROL_FRAME)) { if(dlc->retransmissions < uart_data->ker.n2) { /* * retransmission of Control frame */ dlc->retransmissions++; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); ker_mux_send_frame( temp_desc ); } else { /* * maximum number of retransmissions reached */ switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: /* * act as on reception of a DM frame */ /* * create DM frame */ MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + 2)); temp_desc->next = (ULONG)NULL; temp_desc->len = 2; memcpy(temp_desc->buffer, dlc->last_command->buffer, 2) ;/*lint !e419 !e420 apparent data overrun and access beyond array*/ temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME; /* * act as on reception of a DM frame */ forward = 0; ker_receive_dm_frame(&forward, temp_desc); /* * process results of analysis */ if(forward) { for(j=0; j <= UART_MAX_NUMBER_OF_CHANNELS; j++) { if(j NEQ UART_CONTROL_INSTANCE) { /* * set dlc values */ dlc = &uart_data->dlc_table[j]; dlci = dlc->dlci; /* * channel to close */ if((forward & UART_FORWARD_DLC_RELEASE) && (dlc->connection_state EQ UART_CONNECTION_DEAD) && (dlci NEQ UART_DLCI_INVALID)) { PALLOC(uart_mux_dlc_release_ind, UART_MUX_DLC_RELEASE_IND); /* * release channel */ ker_mux_dlc_release(j); /* * inform ACI about DLC release */ uart_mux_dlc_release_ind->device = uart_data->device; uart_mux_dlc_release_ind->dlci = dlci; PSEND(hCommMMI, uart_mux_dlc_release_ind); } } } } break; case KER_MUX_DLC_CLOSING: /* * act as on reception of a DM frame */ /* * create DM frame */ MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + 2)); temp_desc->next = (ULONG)NULL; temp_desc->len = 2; memcpy(temp_desc->buffer, dlc->last_command->buffer, 2) ;/*lint !e419 !e420 apparent data overrun and access beyond array*/ temp_desc->buffer[UART_OFFSET_CONTROL] = UART_DM_CONTROL_FRAME; /* * act as on reception of a DM frame */ forward = 0; ker_receive_dm_frame(&forward, temp_desc); /* * process results of analysis */ if(forward) { continuous = FALSE; for(j=0; j <= UART_MAX_NUMBER_OF_CHANNELS; j++) { if(j NEQ UART_CONTROL_INSTANCE) { /* * set dlc values */ dlc = &uart_data->dlc_table[j]; dlci = dlc->dlci; /* * channel to close */ if((forward & UART_FORWARD_DLC_RELEASE) && (dlc->connection_state EQ UART_CONNECTION_DEAD) && (dlci NEQ UART_DLCI_INVALID)) { /* * release channel */ ker_mux_dlc_release(j); } if(dlc->connection_state NEQ UART_CONNECTION_DEAD) continuous = TRUE; } } /* * change state if all channels are closed */ if(continuous EQ FALSE) { SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSING ); /* * build and send CLD command frame: */ ker_mux_send_close_down(); /* * start timer */ sig_ker_rt_start_t3_req(); } } break; case KER_MUX_CLOSING: /* * do not care about retransmission couter * retransmission stops if T3 expires */ dlc->retransmissions++; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); ker_mux_send_frame( temp_desc ); break; default: TRACE_ERROR( "SIG_RT_KER_TIMEOUT_T1_IND unexpected" ); break; } } } break; case UART_CONNECTION_DEAD: break; default: { TRACE_EVENT_P2("Unexpected DLC connection state: %d, uart_kers.c(%d)", dlc->connection_state, __LINE__); break; } } } if(uart_data->ker.nr_t1) { /* * restart timer t1 */ sig_ker_rt_start_t1_req(); } } /* sig_rt_ker_timeout_t1_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rt_ker_timeout_t2_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RT_KER_TIMEOUT_T2_IND | | This signal means that no response to a sent command frame | was received within the allowed time. It is assumed that | the frame has been lost and a retransmission is done if the | maximum number of retransmissions is not reached yet. | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_rt_ker_timeout_t2_ind () { UBYTE i; T_desc2* temp_desc; T_DLC* dlc; TRACE_ISIG( "sig_rt_ker_timeout_t2_ind" ); for( i = 0; i <= UART_MAX_NUMBER_OF_CHANNELS; i++ ) { /* * set dlc value */ dlc = &uart_data->dlc_table[i]; switch(dlc->connection_state) { case UART_CONNECTION_OPEN: case UART_CONNECTION_DISC_SENT: /* * T2 is only used for UIH Control frames */ if((dlc->last_command NEQ NULL) && (dlc->last_command->buffer[UART_OFFSET_CONTROL] EQ UART_UIH_CONTROL_FRAME)) { if(dlc->retransmissions < uart_data->ker.n2) { /* * retransmission of Control frame */ dlc->retransmissions++; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); ker_mux_send_frame( temp_desc ); } else { /* * maximum number of retransmissions reached */ switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX: case KER_MUX_DLC_CLOSING: /* * skip this frame and send next frame */ /* * remove current UIH frame */ MFREE_DESC2(dlc->last_command); dlc->last_command = NULL; uart_data->ker.nr_t2--; if(dlc->next_command) { /* * transmit next command frame */ dlc->last_command = dlc->next_command; dlc->next_command = (T_desc2*)dlc->next_command->next; dlc->last_command->next = (ULONG)NULL; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); dlc->retransmissions = 0; ker_mux_send_frame(temp_desc); uart_data->ker.nr_t2++; } break; case KER_MUX_CLOSING: /* * do not care about retransmission couter * retransmission stops if T3 expires */ dlc->retransmissions++; MALLOC(temp_desc, (USHORT)(sizeof( T_desc2 ) - 1 + dlc->last_command->len)); temp_desc->next = (ULONG)NULL; temp_desc->len = dlc->last_command->len; memcpy(temp_desc->buffer, dlc->last_command->buffer, dlc->last_command->len); ker_mux_send_frame( temp_desc ); break; default: TRACE_ERROR( "SIG_RT_KER_TIMEOUT_T2_IND unexpected" ); break; } } } break; case UART_CONNECTION_DEAD: break; default: { TRACE_EVENT_P2("Unexpected DLC connection state: %d, uart_kers.c(%d)", dlc->connection_state, __LINE__); break; } } } if(uart_data->ker.nr_t2) { /* * restart timer t2 */ sig_ker_rt_start_t2_req(); } } /* sig_rt_ker_timeout_t2_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rt_ker_timeout_t3_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RT_KER_TIMEOUT_T3_IND | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_rt_ker_timeout_t3_ind () { TRACE_ISIG( "sig_rt_ker_timeout_t3_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_MUX_ESTABLISH: case KER_MUX_CLOSING: SET_STATE( UART_SERVICE_KER, KER_MUX_CLOSED ); /* * stop timers and * remove all DLC instances */ ker_mux_close_down(); if(uart_data->ker.tx_data_desc EQ NULL) { uart_data->ker.received_prim|= UART_MUX_CLOSE_REQ_MASK; if(uart_data->ker.flush_state EQ UART_KER_NOT_FLUSHING) { uart_data->ker.flush_state = UART_KER_TX_FLUSH; sig_ker_tx_flush_req(); } } break; default: TRACE_ERROR( "SIG_RT_KER_TIMEOUT_T3_IND unexpected" ); break; } } /* sig_rt_ker_timeout_t3_ind() */ /* +------------------------------------------------------------------------------ | Function : sig_rt_ker_timeout_tesd_ind +------------------------------------------------------------------------------ | Description : Handles the internal signal SIG_RT_KER_TIMEOUT_TESD_IND | | This signal means that the trailing guard period has completed. | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void sig_rt_ker_timeout_tesd_ind () { UBYTE i; TRACE_ISIG( "sig_rt_ker_timeout_tesd_ind" ); switch( GET_STATE( UART_SERVICE_KER ) ) { case KER_READY: case KER_MUX: for( i = 0; i < UART_MAX_NUMBER_OF_CHANNELS; i++ ) { /* * set current dtx */ uart_data->dtx = &uart_data->dtx_base[i]; sig_ker_dtx_timeout_tesd_req(); } break; default: TRACE_ERROR( "SIG_RT_KER_TIMEOUT_TESD_IND unexpected" ); break; } } /* sig_rt_ker_timeout_tesd_ind() */