FreeCalypso > hg > fc-magnetite
view src/g23m-fad/ip/cus_ip.h @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : GSM-FaD (8411) | Modul : CUS_IP +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : Custom dependent definitions for the | Protocol Stack Entity | Radio Link Protocol +----------------------------------------------------------------------------- */ #ifndef CUS_IP_H #define CUS_IP_H /*==== CONSTANTS ==================================================*/ /* * TIMER_VALUES * * Description : The constants define the timer values * for the IP timers * If the target system uses other units please * change the values. */ /* * TIMER IDENTIFIER * * Description : The constants define the identifier of the * timer resources of IP. The identifier is used * to reference a timer in a config primitive */ #define TREASSEMBLY_NAME "TREASSEMBLY" /* * MAX_IP_TIMER * * Description : The constant define the number of timer * needed. This number is equal to the number * of simultaneously instances. */ #define MAX_IP_TIMER ( MAX_SEGM_SERVER * MAX_LAYER ) /* * VERSION * * Description : The constants define the type and the value * of a version identification. The version * is part of the monitor struct. */ #define T_VERSION char /* * This is the first version with DTILIB */ #define VERSION_IP "IP 1.1" /* * VSI_CALLER * * Description : For multithread applications the constant VSI_CALLER * must be defined to identify the calling thread of the * VSI-Interface. This must be done correponding to the * type of T_VSI_CALLER in VSI.H. The comma symbol is * neccessary because the vsi-functions are called * like this vsi_xxx (VSI_CALLER par2, par3 ...) */ #ifdef OPTION_MULTITHREAD #define VSI_CALLER ip_handle, #define VSI_CALLER_SINGLE ip_handle #else #define VSI_CALLER #define VSI_CALLER_SINGLE #endif #endif