FreeCalypso > hg > fc-magnetite
view src/g23m-fad/ppp/ppp_prxf.c @ 638:cab2f315827e
FFS dev.c: added Spansion PL032J to the "generic" table
With the discovery of first GTM900 and then Tango, it now appears that
Openmoko was not the only manuf after all who kept TI's TCS211 firmware
largely intact (as opposed to changing it beyond all recognition like
Compal, Chi-Mei and BenQ did), thus we are now getting new "alien" targets
on which we reuse the original manuf's FFS with IMEI and RF calibration
tables as if it were native. On these targets we use the original
device table for FFS, even though we previously thought that it would
never apply to any target other than dsample, leonardo and gtamodem.
We have previously added Samsung K5L33xxCAM (a new kind of multi-ID device)
to the generic table to support its use in Huawei GTM900-B modules; now
we got news that some slightly older GTM900-B specimen used S71PL032J
instead, so we are now adding PL032J as well.
author | Mychaela Falconia <falcon@freecalypso.org> |
---|---|
date | Thu, 30 Jan 2020 17:45:48 +0000 |
parents | 90eb61ecd093 |
children |
line wrap: on
line source
/* +----------------------------------------------------------------------------- | Project : | Modul : +----------------------------------------------------------------------------- | Copyright 2002 Texas Instruments Berlin, AG | All rights reserved. | | This file is confidential and a trade secret of Texas | Instruments Berlin, AG | The receipt of or possession of this file does not convey | any rights to reproduce or disclose its contents or to | manufacture, use, or sell anything it may describe, in | whole, or in part, without the specific written consent of | Texas Instruments Berlin, AG. +----------------------------------------------------------------------------- | Purpose : This modul is part of the entity PPP and implements all | procedures and functions as described in the | SDL-documentation (PRX-statemachine) +----------------------------------------------------------------------------- */ #define ENTITY_PPP /*==== INCLUDES =============================================================*/ #include "typedefs.h" /* to get Condat data types */ #include "vsi.h" /* to get a lot of macros */ #include "macdef.h" /* to get a lot of macros */ #include "custom.h" /* to get a lot of macros */ /*lint -efile(766,gsm.h) */ #include "gsm.h" /* to get a lot of macros */ /*lint -efile(766,cnf_ppp.h) */ #include "cnf_ppp.h" /* to get cnf-definitions */ /*lint -efile(766,mon_ppp.h) */ #include "mon_ppp.h" /* to get mon-definitions */ #include "prim.h" /* to get the definitions of used SAP and directions */ #include "dti.h" /* to get the DTILIB definitions */ #include "ppp.h" /* to get the global entity definitions */ #ifdef FF_STATUS_TE #include "gdi.h" /* To include driver type-defines */ #include "ste.h" /* To include function interface for TE status driver */ #include "ppp_prxf.h" /* To include call-back function for TE status driver */ #endif /* FF_STATUS_TE */ /*==== CONST ================================================================*/ /*==== LOCAL VARS ===========================================================*/ /*==== PRIVATE FUNCTIONS ====================================================*/ /*==== PUBLIC FUNCTIONS =====================================================*/ /* +------------------------------------------------------------------------------ | Function : prx_init +------------------------------------------------------------------------------ | Description : The function prx_init() initializes Packet Receive (PRX) | | Parameters : no parameters | +------------------------------------------------------------------------------ */ GLOBAL void prx_init () { TRACE_FUNCTION( "prx_init" ); #if defined FF_STATUS_TE /* * Init of the TE status driver - the handle is unique inside PPP only, SMN * PPP handle-management are placed in the end of ppp.h */ if (DRV_OK NEQ STE_Init( STE_HANDLE, cb_status_TE )) { /* * Error during init of TE status driver - either it is already init or it has failed */ TRACE_ERROR( "STE driver init. error" ); } else { #ifdef _SIMULATION_ TRACE_EVENT( "Return DRV_OK from STE_Init()" ); #endif /* _SIMULATION_ */ /* * Setup of used signal-types for driver to trig a callback */ if (DRV_OK NEQ STE_SetSignal( DRV_SIGTYPE_READ )) { /* * Error during signal-set - either signal illegal, not available or internal fail */ TRACE_ERROR( "STE driver setup error" ); } #ifdef _SIMULATION_ else { TRACE_EVENT( "Return DRV_OK from STE_SetSignal()" ); } #endif /* _SIMULATION_ */ } /* * initialize variables */ ppp_data->prx.TE_data_buffer_desc_list_first = NULL; ppp_data->prx.TE_data_buffer_p_id = DTI_PID_UOS; ppp_data->prx.TE_data_buffered = FALSE; #endif /* FF_STATUS_TE */ INIT_STATE( PPP_SERVICE_PRX , PRX_DEAD ); } /* prx_init() */ #ifdef FF_STATUS_TE /* +------------------------------------------------------------------------------ | Function : cb_status_TE +------------------------------------------------------------------------------ | Description : Handles the call-back from the TE status driver and sends the | NEW_POWER_STATUS signal to the PS | | Parameters : None | +------------------------------------------------------------------------------ */ GLOBAL void cb_status_TE (T_DRV_SIGNAL * signal) { TRACE_FUNCTION( "cb_status_TE" ); if((signal->SignalType EQ DRV_SIGTYPE_READ) && (signal->DrvHandle EQ STE_HANDLE) && (*((USHORT*)signal->UserData) EQ STE_IDENTIFIER_POWER)) { PSIGNAL(hCommPPP, NEW_POWER_STATUS, NULL); } else { TRACE_ERROR( "STE driver: Signal not supported" ); } } /* cb_status_TE() */ #endif /* FF_STATUS_TE */